Country

Idioma

Unidade de medida

Listar preços:

Desconto: %

Listar preços:

$470.97 /cada

Seu preço::

Qtd.

Shoulder milling cutter for high-speed aluminum machining.

5720 Series • End Mill • Cylindrical Shank • Metric

Name: 5720 Series • End Mill • Cylindrical Shank • Metric
SKU: 5672892
Rating: 0 (0 reviews)

Shoulder milling cutter for high-speed aluminum machining.

Métrico

Polegada

SAP Material Number	5672892
ISO Catalog Number	5720VZ16CA025Z2R75
ANSI Catalog Number	5720VZ16CA025Z02R75
[D1] Effective Cutting Diameter	25 mm
[D1] Effective Cutting Diameter	.984 in
[D] Adapter / Shank / Bore Diameter	25 mm
[D] Adapter / Shank / Bore Diameter	.9843 in
[L] Overall Length	131 mm
[L] Overall Length	5.157 in
[L2] Head Length	75 mm
[L2] Head Length	2.952 in
[AP1MAX] 1st Maximum Cutting Depth	16 mm
[AP1MAX] 1st Maximum Cutting Depth	.6299 in
Number of Inserts	2
Maximum Ramping Angle	14.5
Weight Kilograms	0.39
Max RPM	51000

Ver todas as variantes de produtos

Usos e aplicações

Spiral Circular
Slotting: Shoulder Profiling
Fresamento de face
Fresamento helicoidal
Fresamento de rampa: blank
Haste — Cilíndrica lisa
Fresamento — Refrigeração interna
Fresamento de cavidade
Rebaixamento
Inclined Square End Mill

Materiais das peças

K Cast Iron

N Non-Ferrous

Características e benefícios

For pocketing and profiling in aluminum and aluminum alloys.

Maximum stability in high-speed applications.

Excellent choice for components with thin walls due to low cutting pressure.

Internal coolant supply.

Reinforced pockets for high feed applications and ramping, increasing tool and productivity.

Lateral da máquina

carregando...

Lateral da peça

carregando...

Guia de seleção de insertos

5720 Series • Insert Selection Guide
Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	–	–	–	–	–	–
P3–P4	–	–	–	–	–	–
P5–P6	–	–	–	–	–	–
M1–M2	–	–	–	–	–	–
M3	–	–	–	–	–	–
K1–K2	–	–	–	–	–	–
K3	–	–	–	–	–	–
N1–N2	.F..721	GH1	.F..721	GH1	.F..721	GH1
N3	.F..721	GH1	.F..721	GH1	.F..721	GH1
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

Avanços iniciais recomendados [mm]

5720 Series • Recommended Starting Feeds [mm/th]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
...FR721	0,12	0.45	0.81	0,08	0.33	0.58	0,06	0.25	0.43	0,06	0.21	0.38	0,05	0.2	0.35
...ER721	0.15	0.50	0.92	0.11	0.36	0.66	0.08	0.27	0.5	0.07	0,24	0.43	0.07	0,22	0,40
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

5720 Series • Recommended Starting Feeds [IPT]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
...FR721	0,12	0.45	0.81	0,08	0.33	0.58	0,06	0.25	0.43	0,06	0.21	0.38	0,05	0.2	0.35
...ER721	0.15	0.50	0.92	0.11	0.36	0.66	0.08	0.27	0.5	0.07	0,24	0.43	0.07	0,22	0,40
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

Velocidades recomendadas iniciais [m/min]

5720 Series • Recommended Starting Speed [m/min]
Grade		GH1
Chip Thickness hex mm		Min		Max
Material Group		Max	Start	Min
P	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
	5	–	–	–
	6	–	–	–
M	1	–	–	–
	2	–	–	–
	3	–	–	–
K	1	215	140	120
	2	195	120	100
	3	180	105	80
N	1	795	695	600
	2	615	520	425
	3	615	520	425
S	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
H	1	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

5720 Series • Recommended Starting Speed [SFM]
Grade		GH1
Chip Thickness hex Inch		Min		Max
Material Group		Max	Start	Min
P	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
	5	–	–	–
	6	–	–	–
M	1	–	–	–
	2	–	–	–
	3	–	–	–
K	1	705	460	395
	2	640	395	330
	3	590	345	260
N	1	2610	2280	1970
	2	2020	1705	1395
	3	2020	1705	1395
S	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
H	1	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Código de catálogo ISO	Classe

Bem-vindo!

Confirme suas preferências

Atualizar preferências

Sugestões de produtos

Product Family suggestions

Entre em contato com Dpto. Comercial

Entre em contato com Dpto. Comercial

Editando solução

Adicionando solução

5720 Series • End Mill • Cylindrical Shank • Metric