Beyond Evolution Boring Bars
Filtry
Filtry
Wyświetl filtry w
MetryczneCalowe
Workpiece Material
Workpiece Material
- P Steel (52)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(52)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(52)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(52)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(52)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(52)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(52)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(52)
- M Stainless Steel (52)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(52)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(52)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(52)
- K Cast Iron (52)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(52)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(52)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(52)
- N Non-Ferrous Materials (52)
- N1Wrought Aluminum (52)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(52)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (52)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (52)
- N6Carbon, Graphite Composites, CFRP (52)
- S High-Temp Alloys (52)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(52)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(52)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(52)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(52)
- H Hardened Materials (52)
- H1Hardened Materials 44-48 HRC(52)
- H2Hardened Materials 48-55 HRC(52)
Applications
Applications
Grooving (52)
ID Grooving (52)
Plunge Turning (40)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (52)
- Lightly Interrupted Cut (52)
- Smooth Cut (52)
Over All Length [L]
Over All Length [L]
- 125.0 mm(8)
- 150.0 mm(12)
- 180.0 mm(12)
- 200.0 mm(12)
- 250.0 mm(8)
do
Corner Radius
Corner Radius
- 0.0 mm(16)
- 0.2 mm(52)
- 0.4 mm(24)
- 0.8 mm(8)
- 1.0 mm(16)
- 1.05 mm(16)
- 1.2 mm(16)
- 1.5 mm(16)
- 1.55 mm(16)
- 1.575 mm(16)
- 1.6 mm(16)
- 1.65 mm(16)
- 2.0 mm(8)
- 2.075 mm(8)
- 2.375 mm(8)
- 2.45 mm(8)
do
application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (52)
- KCK20B (52)
- KCM35B (40)
- KCP10B (52)
- KCP25B (52)
- KCP25C (52)
- KCS10B (40)
- KCU10 (52)
- KCU10B (52)
- KCU25 (52)
- KCU25B (52)
Hand Of Tool
Hand Of Tool
- L (26)
- R (26)
F Dimension
F Dimension
- 8.52 mm(4)
- 9.0 mm(4)
- 11.0 mm(5)
- 11.06 mm(7)
- 13.0 mm(6)
- 13.94 mm(2)
- 13.97 mm(4)
- 17.0 mm(4)
- 17.3 mm(6)
- 17.5 mm(2)
- 21.13 mm(4)
- 22.0 mm(4)
do
Minimum Bore Diameter
Minimum Bore Diameter
- 15.88 mm(4)
- 16.0 mm(4)
- 20.0 mm(12)
- 25.0 mm(10)
- 25.4 mm(2)
- 31.75 mm(6)
- 32.0 mm(6)
- 38.1 mm(4)
- 40.0 mm(4)
do
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 15.88 mm(4)
- 16.0 mm(4)
- 20.0 mm(12)
- 25.0 mm(10)
- 25.4 mm(2)
- 31.75 mm(6)
- 32.0 mm(6)
- 38.1 mm(4)
- 40.0 mm(4)
do
Cutting Direction
Cutting Direction
- E (21)
- S (31)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (34)
- NEUTRAL (ZERO) (18)
Maximum Bore Depth
Maximum Bore Depth
- 24.0 mm(4)
- 25.4 mm(4)
- 31.75 mm(6)
- 32.0 mm(4)
- 38.1 mm(6)
- 40.0 mm(4)
- 40.28 mm(2)
- 40.3 mm(2)
- 50.0 mm(2)
- 50.3 mm(4)
- 50.8 mm(7)
- 63.4 mm(2)
- 63.5 mm(1)
- 64.0 mm(3)
- 64.01 mm(1)
do
frontEnd
Cutting Width
Cutting Width
- 1.6 mm(12)
- 2.0 mm(16)
- 2.12 mm(16)
- 2.125 mm(16)
- 2.387 mm(16)
- 2.388 mm(16)
- 2.51 mm(16)
- 2.511 mm(16)
- 3.0 mm(16)
- 3.125 mm(16)
- 3.175 mm(16)
- 3.177 mm(16)
- 3.3 mm(16)
- 3.301 mm(16)
- 3.302 mm(16)
- 4.0 mm(8)
- 4.094 mm(16)
- 4.125 mm(8)
- 4.75 mm(8)
- 4.76 mm(8)
- 4.762 mm(8)
- 4.763 mm(8)
- 4.873 mm(8)
- 4.877 mm(8)
- 4.878 mm(8)
do
Insert Size
Insert Size
- 1F (12)
- 2 (16)
- 3 (16)
- 4 (8)
Maximum Cutting Depth
Maximum Cutting Depth
- 5.0 mm(8)
- 7.0 mm(24)
- 10.0 mm(12)
- 12.0 mm(8)
do
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B L (40)
- H W (52)
backEnd
Back-End Diameter
Back-End Diameter
- 12.0 mm(4)
- 12.7 mm(4)
- 15.87 mm(4)
- 15.875 mm(2)
- 16.0 mm(6)
- 19.05 mm(6)
- 20.0 mm(6)
- 25.0 mm(6)
- 25.4 mm(6)
- 31.7 mm(1)
- 31.75 mm(3)
- 32.0 mm(4)
do
No filters matching ""
