Drilling
Drilling: Inclined Exit
Drilling: Stacked Plates
Tool Dimensions: 2flute/4margin/coolant
DIN number 6535
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Nr materiału | 3638619 |
| Nr katalogowy ISO | B256A06500 |
| Nr katalogowy ANSI | B256A06500 |
| Grade | KC7315 |
| [D1] Drill Diameter M | 6.5 mm |
| [D1] Drill Diameter M | 0.2559 in |
| [L] Overall Length | 105 mm |
| [L] Overall Length | 4.1339 in |
| [L3] Flute Length | 67 mm |
| [L3] Flute Length | 2.6378 in |
| [L4] Maximum Drilling Depth | 57 mm |
| [L4] Maximum Drilling Depth | 2.2441 in |
| [L5] Drill Point Length | 1.29 mm |
| [L5] Drill Point Length | 0.0508 in |
| [LS] Shank Length | 36 mm |
| [LS] Shank Length | 1.4173 in |
| [D] Adapter / Shank / Bore Diameter | 8 mm |
| [D] Adapter / Shank / Bore Diameter | 0.315 in |
DrillingDrilling: Inclined ExitDrilling: Stacked PlatesTool Dimensions: 2flute/4margin/coolantDIN number 6535Drilling - Through CoolantThrough Coolant: MQL (Minimum Quantity Lubricant): DrillingShank - Cylindrical Plain ≤h6Helix Angle: 30°Drilling: Cross-Hole DrillingGatunki
KC7315
Composition: Multilayered PVD TiN-TiAlN coated fine-grain carbide.
Application: Applicable for steel and cast iron. This grade offers excellent wear resistance and reliability at intermediate to elevated cutting speeds.
Złóż nowe rozwiązanie aby obliczyc parametry posuwu i prędkości
Po złóżeniu rozwiązania wybierz ikonę "Posuwy i prędkości" a system pokaże rekomendowane wartości. Możesz doprecyzować wyniki dodając maszynę i jej specyfikacje lub zmień wartości początkowe Używając suwaki.
| Grupa materiałowa |  |  | |||||||||||
| Grupa materiałowa | Prędkość skrawania | Calowe | |||||||||||
| Zakres prędkości skrawania [SFM] | Zalecana wartość prędkości posuwu w zależności od średnicy (f) | ||||||||||||
| Min. | Wartość początkowa | Maks. | 1/8 0.125 | 3/16 0.188 | 1/4 0.250 | 5/16 0.313 | 3/8 0.375 | 1/2 0.500 | 5/8 0.625 | 3/4 0.750 | |||
| P | 0 | 430 | 480 | 660 | Cali/obrót | 0.003–0.004 | 0.003–0.005 | 0.004–0.005 | 0.004–0.006 | 0.004–0.008 | 0.005–0.009 | 0.006–0.011 | 0.008–0.012 |
| 1 | 390 | 480 | 570 | Cali/obrót | 0.003–0.004 | 0.004–0.006 | 0.004–0.006 | 0.005–0.008 | 0.005–0.009 | 0.006–0.011 | 0.007–0.013 | 0.009–0.015 | |
| 2 | 260 | 330 | 390 | Cali/obrót | 0.003–0.004 | 0.003–0.005 | 0.004–0.007 | 0.006–0.008 | 0.006–0.010 | 0.007–0.013 | 0.009–0.017 | 0.010–0.020 | |
| 3 | 260 | 300 | 390 | Cali/obrót | 0.003–0.004 | 0.004–0.006 | 0.004–0.006 | 0.005–0.008 | 0.005–0.009 | 0.006–0.011 | 0.007–0.013 | 0.009–0.015 | |
| 4 | 200 | 230 | 260 | Cali/obrót | 0.002–0.004 | 0.003–0.005 | 0.004–0.005 | 0.004–0.006 | 0.004–0.007 | 0.005–0.009 | 0.006–0.011 | 0.007–0.012 | |
| K | 1 | 390 | 490 | 660 | Cali/obrót | 0.003–0.004 | 0.006–0.008 | 0.008–0.011 | 0.010–0.014 | 0.011–0.016 | 0.013–0.017 | 0.014–0.020 | 0.016–0.022 |
| 2 | 260 | 390 | 520 | Cali/obrót | 0.003–0.004 | 0.005–0.007 | 0.008–0.010 | 0.009–0.012 | 0.010–0.014 | 0.012–0.016 | 0.013–0.018 | 0.015–0.020 | |
| 3 | 200 | 260 | 390 | Cali/obrót | 0.003–0.004 | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.009–0.012 | 0.009–0.013 | 0.011–0.015 | 0.012–0.016 | |
| Grupa materiałowa | | | |||||||||||
| Prędkość skrawania | Metryczne | ||||||||||||
| Zakres prędkości skrawania | Zalecana wartość prędkości posuwu w zależności od średnicy (f) | ||||||||||||
| Min. | Wartość początkowa | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 130 | 145 | 200 | mm/obr. | 0,07–0,09 | 0,08–0,13 | 0,09–0,13 | 0,11–0,16 | 0,11–0,19 | 0,13–0,23 | 0,15–0,28 | 0,19–0,31 |
| 1 | 120 | 145 | 175 | mm/obr. | 0,08–0,11 | 0,09–0,15 | 0,11–0,15 | 0,13–0,19 | 0,13–0,22 | 0,15–0,27 | 0,18–0,33 | 0,22–0,37 | |
| 2 | 80 | 100 | 120 | mm/obr. | 0,08–0,11 | 0,08–0,13 | 0,09–0,17 | 0,15–0,21 | 0,16–0,25 | 0,18–0,33 | 0,22–0,42 | 0,26–0,50 | |
| 3 | 80 | 90 | 120 | mm/obr. | 0,08–0,11 | 0,09–0,15 | 0,11–0,15 | 0,13–0,19 | 0,13–0,22 | 0,15–0,27 | 0,18–0,33 | 0,22–0,37 | |
| 4 | 60 | 70 | 80 | mm/obr. | 0,06–0,09 | 0,07–0,13 | 0,09–0,13 | 0,11–0,15 | 0,11–0,17 | 0,13–0,22 | 0,15–0,27 | 0,17–0,30 | |
| K | 1 | 120 | 150 | 200 | mm/obr. | 0,08–0,11 | 0,14–0,20 | 0,20–0,28 | 0,25–0,35 | 0,29–0,40 | 0,32–0,43 | 0,36–0,50 | 0,40–0,55 |
| 2 | 80 | 120 | 160 | mm/obr. | 0,08–0,11 | 0,13–0,17 | 0,19–0,26 | 0,23–0,30 | 0,25–0,36 | 0,30–0,40 | 0,34–0,46 | 0,37–0,50 | |
| 3 | 60 | 80 | 120 | mm/obr. | 0,07–0,10 | 0,10–0,14 | 0,15–0,21 | 0,19–0,26 | 0,22–0,30 | 0,24–0,33 | 0,28–0,38 | 0,30–0,41 | |
| | ||||||||||||
| Prędkość skrawania | Metryczne | ||||||||||||
| Zakres prędkości skrawania | Zalecana wartość prędkości posuwu w zależności od średnicy (f) | ||||||||||||
| Grupa materiałowa | Min. | Wartość początkowa | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 130 | 145 | 200 | mm/dev | 0,07–0,09 | 0,08–0,13 | 0,09–0,13 | 0,11–0,16 | 0,11–0,19 | 0,13–0,23 | 0,15–0,28 | 0,19–0,31 |
| 1 | 120 | 145 | 175 | mm/dev | 0,08–0,11 | 0,09–0,15 | 0,11–0,15 | 0,13–0,19 | 0,13–0,22 | 0,15–0,27 | 0,18–0,33 | 0,22–0,37 | |
| 2 | 80 | 100 | 120 | mm/dev | 0,08–0,11 | 0,08–0,13 | 0,09–0,17 | 0,15–0,21 | 0,16–0,25 | 0,18–0,33 | 0,22–0,42 | 0,26–0,50 | |
| 3 | 80 | 90 | 120 | mm/dev | 0,08–0,11 | 0,09–0,15 | 0,11–0,15 | 0,13–0,19 | 0,13–0,22 | 0,15–0,27 | 0,18–0,33 | 0,22–0,37 | |
| 4 | 60 | 70 | 80 | mm/dev | 0,06–0,09 | 0,07–0,13 | 0,09–0,13 | 0,11–0,15 | 0,11–0,17 | 0,13–0,22 | 0,15–0,27 | 0,17–0,30 | |
| Tolerancja • Metryczne | ||
| zakres rozmiarów nominalnych | D1 tolerancja m7 | D tolerancja h6 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 | |
| Tolerancja • Calowe | ||
| zakres rozmiarów nominalnych | D1 tolerancja m7 | D tolerancja h6 |
| .0002/.0006 | .0000/-.0003 | |
| .0002/.0008 | .0000/-.0004 | |
| .0003/.0010 | .0000/-.0004 | |
| .0003/.0011 | .0000/-.0005 | |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Oznaczenie katalogowe ISO
Oznaczenie katalogowe ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Oznaczenie katalogowe ISO | Gatunek |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?