Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Limitli süre geçerli olan tekliflerimizle az ödeyip, daha çok frezeleyin. Şimdi Satın Alın.

PCD (Çoklu kristalli elmas) takımların uzun takım ömrü, karbür çözümlere kıyasla 10 kata kadar daha yüksek verimlilik sağlar.

 

Yüksek hızda alüminyum işleme için PCD (Çoklu kristalli elmas) takımlar işleme süresini büyük ölçüde kısaltır.

Çok sayıda uygulamayı kapsayan çeşitli tiplerde PCD (Çoklu kristalli elmas) Parmak frezeler, PCD (Çoklu kristalli elmas) Matkaplar ve PCD (Çoklu kristalli elmas) Raybalar, çevrim sürelerini önemli ölçüde kısaltmak ve üretkenliği artırmak için alüminyum işleme stratejileri.

Kaba talaş işleme ve ince talaş işleme işlemleri için ideal olan tüm takımlar en az miktarda yağlama yöntemine uyumlu ve kullanıma hazırdır.

Keskin kesme kenarları ve düşük sürtünmeli kesme sırtı yüzeyleri, yüksek kalitede hassas son işlemeli yüzeylerin elde edilmesini garanti eder.

Filtreleri Seçin
Filtreler
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • N Non-Ferrous Materials (138)
      • N1
        Wrought Aluminum (138)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(138)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(138)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (138)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (44)
      • N6
        Carbon, Graphite Composites, CFRP (44)
      • N7
        MMC's (44)
    Applications
    Applications
    • Blind Hole FinishingBlind Hole Finishing (37)
    • CornerStyle Chamfer DrillingCornerStyle Chamfer Drilling (49)
    • DrillingDrilling (67)
    • Face MillingFace Milling (44)
    • PocketPocket (18)
    • Pocket HelicalPocket Helical (18)
    • Pocket MillingPocket Milling (18)
    • Pocket Plunge MillingPocket Plunge Milling (18)
    • RampingRamping (18)
    • Shoulder MillingShoulder Milling (44)
    • Shoulder RoughingShoulder Roughing (44)
    • Shoulder Square EndShoulder Square End (44)
    • Slot MillingSlot Milling (44)
    • Slot Square EndSlot Square End (44)
    • Through Hole FinishingThrough Hole Finishing (32)
    • Trochoidal MillingTrochoidal Milling (44)
    Cutting Diameter
    Cutting Diameter
    • 0.234 in(1)
    • 0.237 in(5)
    • 0.25 in(5)
    • 0.256 in(1)
    • 0.276 in(1)
    • 0.281 in(1)
    • 0.295 in(1)
    • 0.313 in(5)
    • 0.315 in(5)
    • 0.328 in(1)
    • 0.335 in(1)
    • 0.345 in(1)
    • 0.354 in(1)
    • 0.374 in(1)
    • 0.375 in(5)
    • 0.391 in(1)
    • 0.394 in(5)
    • 0.408 in(1)
    • 0.414 in(1)
    • 0.422 in(1)
    • 0.433 in(1)
    • 0.438 in(3)
    • 0.453 in(2)
    • 0.473 in(6)
    • 0.484 in(1)
    • 0.492 in(1)
    • 0.5 in(6)
    • 0.512 in(1)
    • 0.531 in(2)
    • 0.551 in(3)
    • 0.564 in(1)
    • 0.572 in(1)
    • 0.578 in(1)
    • 0.591 in(1)
    • 0.61 in(1)
    • 0.625 in(6)
    • 0.63 in(6)
    • 0.65 in(1)
    • 0.669 in(1)
    • 0.672 in(1)
    • 0.69 in(1)
    • 0.709 in(3)
    • 0.728 in(1)
    • 0.748 in(1)
    • 0.75 in(6)
    • 0.768 in(1)
    • 0.787 in(6)
    • 0.866 in(1)
    • 0.876 in(1)
    • 0.984 in(3)
    • 1.0 in(3)
    • 1.102 in(1)
    • 1.125 in(1)
    • 1.181 in(1)
    • 1.25 in(3)
    • 1.26 in(3)
    • 1.417 in(1)
    • 1.438 in(1)
    • 1.5 in(2)
    • 1.563 in(1)
    • 1.575 in(3)
    • 1.653 in(1)
    • 1.655 in(1)
    • 1.969 in(1)
    • 2.0 in(1)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 5.95 mm(1)
    • 6.0 mm(5)
    • 6.351 mm(5)
    • 6.5 mm(1)
    • 7.0 mm(1)
    • 7.15 mm(1)
    • 7.5 mm(1)
    • 7.95 mm(5)
    • 8.0 mm(5)
    • 8.326 mm(1)
    • 8.5 mm(1)
    • 8.725 mm(1)
    • 9.0 mm(1)
    • 9.5 mm(1)
    • 9.525 mm(5)
    • 9.925 mm(1)
    • 10.0 mm(5)
    • 10.326 mm(1)
    • 10.5 mm(1)
    • 10.726 mm(1)
    • 11.0 mm(1)
    • 11.125 mm(3)
    • 11.5 mm(2)
    • 12.0 mm(6)
    • 12.3 mm(1)
    • 12.5 mm(1)
    • 12.701 mm(6)
    • 13.0 mm(1)
    • 13.5 mm(2)
    • 14.0 mm(3)
    • 14.3 mm(1)
    • 14.5 mm(1)
    • 14.675 mm(1)
    • 15.0 mm(1)
    • 15.5 mm(1)
    • 15.875 mm(6)
    • 16.0 mm(6)
    • 16.5 mm(1)
    • 17.0 mm(1)
    • 17.075 mm(1)
    • 17.5 mm(1)
    • 18.0 mm(3)
    • 18.5 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(6)
    • 19.5 mm(1)
    • 20.0 mm(6)
    • 22.0 mm(1)
    • 22.25 mm(1)
    • 25.0 mm(3)
    • 25.401 mm(3)
    • 28.0 mm(1)
    • 28.576 mm(1)
    • 30.0 mm(1)
    • 31.75 mm(3)
    • 32.0 mm(3)
    • 36.0 mm(1)
    • 36.525 mm(1)
    • 38.1 mm(2)
    • 39.7 mm(1)
    • 40.0 mm(3)
    • 41.95 mm(1)
    • 42.0 mm(1)
    • 50.0 mm(1)
    • 50.801 mm(1)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 6.0 mm(1)
    • 6.351 mm(1)
    • 7.95 mm(1)
    • 8.0 mm(1)
    • 9.525 mm(2)
    • 10.0 mm(2)
    • 12.0 mm(1)
    • 12.701 mm(1)
    • 15.0 mm(6)
    • 15.875 mm(7)
    • 16.0 mm(1)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 24.0 mm(1)
    • 25.0 mm(1)
    • 25.401 mm(3)
    • 28.0 mm(1)
    • 31.75 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(3)
    • 50.801 mm(1)
    Cutting Length Min-Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.237 in(1)
    • 0.25 in(1)
    • 0.313 in(1)
    • 0.315 in(1)
    • 0.375 in(2)
    • 0.394 in(2)
    • 0.473 in(1)
    • 0.5 in(1)
    • 0.591 in(6)
    • 0.625 in(7)
    • 0.63 in(1)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.946 in(1)
    • 0.984 in(1)
    • 1.0 in(3)
    • 1.102 in(1)
    • 1.25 in(2)
    • 1.26 in(2)
    • 1.5 in(2)
    • 1.575 in(3)
    • 2.0 in(1)
    Cutting Length Min-Cutting Length Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 34.9 mm(2)
    • 35.0 mm(1)
    • 40.301 mm(2)
    • 43.0 mm(4)
    • 48.7 mm(3)
    • 49.0 mm(4)
    • 53.1 mm(4)
    • 55.6 mm(3)
    • 56.0 mm(4)
    • 60.0 mm(6)
    • 63.0 mm(4)
    • 64.5 mm(2)
    • 71.0 mm(4)
    • 73.0 mm(1)
    • 74.5 mm(1)
    • 77.0 mm(4)
    Maximum Hole Depth [L4] Min-Maximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 1.374 in(2)
    • 1.379 in(1)
    • 1.587 in(2)
    • 1.693 in(4)
    • 1.917 in(3)
    • 1.929 in(4)
    • 2.091 in(4)
    • 2.189 in(3)
    • 2.205 in(4)
    • 2.362 in(6)
    • 2.48 in(4)
    • 2.539 in(2)
    • 2.795 in(4)
    • 2.874 in(1)
    • 2.934 in(1)
    • 3.031 in(4)
    Maximum Hole Depth [L4] Min-Maximum Hole Depth [L4] Max
    Reach
    Reach
    • 0.748 in(4)
    • 0.906 in(2)
    • 0.984 in(2)
    • 1.339 in(4)
    • 1.379 in(3)
    • 1.417 in(3)
    • 1.496 in(3)
    • 1.614 in(3)
    • 1.655 in(1)
    • 1.693 in(4)
    • 1.713 in(2)
    • 1.732 in(2)
    • 1.772 in(6)
    • 1.988 in(1)
    • 2.0 in(1)
    • 2.087 in(4)
    • 2.165 in(4)
    • 2.205 in(3)
    • 2.244 in(1)
    • 2.382 in(3)
    • 2.402 in(4)
    • 2.48 in(1)
    • 2.618 in(4)
    • 2.677 in(1)
    • 2.777 in(3)
    • 2.795 in(1)
    • 2.874 in(1)
    • 3.012 in(2)
    • 3.031 in(3)
    • 3.189 in(1)
    • 3.248 in(2)
    • 3.269 in(4)
    • 3.642 in(1)
    • 3.661 in(4)
    • 3.761 in(1)
    • 3.976 in(4)
    Reach Min-Reach Max
    Reach
    Reach
    • 19.0 mm(4)
    • 23.0 mm(2)
    • 25.0 mm(2)
    • 34.0 mm(4)
    • 35.0 mm(3)
    • 36.0 mm(3)
    • 38.0 mm(3)
    • 41.0 mm(3)
    • 42.0 mm(1)
    • 43.0 mm(4)
    • 43.5 mm(2)
    • 44.0 mm(2)
    • 45.0 mm(6)
    • 50.5 mm(1)
    • 50.801 mm(1)
    • 53.0 mm(4)
    • 55.0 mm(4)
    • 56.0 mm(3)
    • 57.0 mm(1)
    • 60.5 mm(3)
    • 61.0 mm(4)
    • 63.0 mm(1)
    • 66.5 mm(4)
    • 68.0 mm(1)
    • 70.5 mm(3)
    • 71.0 mm(1)
    • 73.0 mm(1)
    • 76.5 mm(2)
    • 77.0 mm(3)
    • 81.0 mm(1)
    • 82.5 mm(2)
    • 83.0 mm(4)
    • 92.5 mm(1)
    • 93.0 mm(4)
    • 95.5 mm(1)
    • 101.0 mm(4)
    Reach Min-Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (44)
    Tool Cutting Edge Angle Min-Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Short Taper Reamer Shank (17)
    • Straight-Cylindrical (121)
    Number of Flutes
    Number of Flutes
    • 2 (87)
    • 3 (2)
    • 4 (36)
    • 5 (2)
    • 6 (11)
    Over All Length [L]
    Over All Length [L]
    • 2.244 in(2)
    • 2.25 in(2)
    • 2.48 in(2)
    • 2.5 in(2)
    • 2.992 in(2)
    • 3.0 in(2)
    • 3.248 in(3)
    • 3.25 in(3)
    • 3.269 in(3)
    • 3.602 in(6)
    • 3.74 in(3)
    • 3.75 in(3)
    • 3.938 in(4)
    • 4.0 in(4)
    • 4.075 in(7)
    • 4.25 in(4)
    • 4.252 in(3)
    • 4.39 in(4)
    • 4.529 in(1)
    • 4.665 in(7)
    • 4.902 in(6)
    • 4.921 in(2)
    • 5.0 in(1)
    • 5.256 in(6)
    • 5.5 in(1)
    • 5.65 in(5)
    • 5.846 in(1)
    • 6.043 in(4)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 57.0 mm(2)
    • 57.151 mm(2)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.0 mm(2)
    • 76.2 mm(2)
    • 82.5 mm(3)
    • 82.551 mm(3)
    • 83.0 mm(3)
    • 91.5 mm(6)
    • 95.0 mm(3)
    • 95.25 mm(3)
    • 100.0 mm(4)
    • 101.601 mm(4)
    • 103.5 mm(7)
    • 107.95 mm(4)
    • 108.0 mm(3)
    • 111.5 mm(4)
    • 115.0 mm(1)
    • 118.5 mm(7)
    • 124.5 mm(6)
    • 125.0 mm(2)
    • 127.0 mm(1)
    • 133.5 mm(6)
    • 139.701 mm(1)
    • 143.5 mm(5)
    • 148.5 mm(1)
    • 153.5 mm(4)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • RADIUS (44)
    Corner Radius
    Corner Radius
    • 0.008 in(6)
    • 0.01 in(6)
    • 0.012 in(9)
    • 0.015 in(16)
    • 0.016 in(7)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(6)
    • 0.25 mm(6)
    • 0.301 mm(9)
    • 0.375 mm(16)
    • 0.4 mm(7)
    Corner Radius Min-Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(44)
    Corner Chamfer Min-Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(44)
    Corner Chamfer Min-Corner Chamfer Max
    application
    Coating
    Coating
    • Uncoated (49)
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KD1410 (44)
    • KD1415 (94)
    Drill Type
    Drill Type
    • 81-01 (49)
    Helix Hand
    Helix Hand
    • N (45)
    Lead in Length
    Lead in Length
    • 0.2 mm(45)
    Lead in Length Min-Lead in Length Max
    Lead In Length
    Lead In Length
    • 0.0 in(45)
    Lead In Length Min-Lead In Length Max
    frontEnd
    Point Angle
    Point Angle
    • 140.0 (49)
    Point Angle Min-Point Angle Max
    Neck Diameter
    Neck Diameter
    • 0.209 in(2)
    • 0.228 in(2)
    • 0.288 in(4)
    • 0.339 in(2)
    • 0.358 in(2)
    • 0.433 in(3)
    • 0.461 in(3)
    • 0.579 in(3)
    • 0.583 in(3)
    • 0.717 in(3)
    • 0.752 in(3)
    • 0.954 in(2)
    • 0.969 in(2)
    • 1.217 in(2)
    • 1.224 in(2)
    • 1.248 in(3)
    • 1.258 in(3)
    Neck Diameter Min-Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 5.301 mm(2)
    • 5.801 mm(2)
    • 7.301 mm(4)
    • 8.6 mm(2)
    • 9.1 mm(2)
    • 11.0 mm(3)
    • 11.701 mm(3)
    • 14.701 mm(3)
    • 14.8 mm(3)
    • 18.2 mm(3)
    • 19.1 mm(3)
    • 24.201 mm(2)
    • 24.6 mm(2)
    • 30.901 mm(2)
    • 31.1 mm(2)
    • 31.701 mm(3)
    • 31.951 mm(3)
    Neck Diameter Min-Neck Diameter Max
    Center Cutting
    Center Cutting
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (121)
    • SHORT TAPER (17)
    Back-End Diameter
    Back-End Diameter
    • 6.0 mm(5)
    • 6.351 mm(6)
    • 7.95 mm(6)
    • 8.0 mm(8)
    • 9.525 mm(7)
    • 10.0 mm(8)
    • 11.101 mm(2)
    • 11.125 mm(4)
    • 12.0 mm(9)
    • 12.701 mm(8)
    • 14.0 mm(6)
    • 14.3 mm(2)
    • 15.875 mm(7)
    • 16.0 mm(9)
    • 17.45 mm(1)
    • 17.5 mm(4)
    • 18.0 mm(6)
    • 19.05 mm(5)
    • 20.0 mm(10)
    • 25.0 mm(7)
    • 25.401 mm(2)
    • 30.0 mm(2)
    • 31.75 mm(5)
    • 32.0 mm(5)
    • 35.0 mm(4)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.237 in(5)
    • 0.25 in(6)
    • 0.313 in(6)
    • 0.315 in(8)
    • 0.375 in(7)
    • 0.394 in(8)
    • 0.437 in(2)
    • 0.438 in(4)
    • 0.473 in(9)
    • 0.5 in(8)
    • 0.551 in(6)
    • 0.564 in(2)
    • 0.625 in(7)
    • 0.63 in(9)
    • 0.687 in(1)
    • 0.69 in(4)
    • 0.709 in(6)
    • 0.75 in(5)
    • 0.787 in(10)
    • 0.984 in(7)
    • 1.0 in(2)
    • 1.181 in(2)
    • 1.25 in(5)
    • 1.26 in(5)
    • 1.379 in(4)
    Back-End Diameter Min-Back-End Diameter Max
    No filters matching ""

    Delik işleme

    (94)Delik işleme

    Frezeleme

    (44)Frezeleme

    Bize Sormak İstediğiniz Bir Şey Var Mı?

    Yetenekli elemanlarımız yardıma hazırdır.

    Daha fazla bilgi almak için
    Scroll Top
    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi
    Sepeti Görüntüle

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Katalog NumarasıKalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?