Bildirimler

Tümünü okundu olarak işaretle
Mobile Menu

Diş Frezeleme

Filtreleri Seçin
Filters
Filtreler
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (389)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (389)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (389)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (389)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (389)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (370)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (389)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (354)
  • M Stainless Steel (389)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (389)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (389)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (354)
  • K Cast Iron (396)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (396)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (389)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (389)
  • N Non-Ferrous Materials (42)
    • N1
      Wrought Aluminum
      (35)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (42)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (42)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (42)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (42)
    • N6
      Carbon, Graphite Composites, CFRP
      (35)
  • S High-Temp Alloys (268)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (268)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (268)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (268)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (268)
  • H Hardened Materials (254)
    • H1
      Hardened Materials 44-48 HRC
      (254)
Applications
Applications
  • Countersinking Countersinking (23)
  • Drilling Drilling (7)
  • ID Thread Turning ID Thread Turning (209)
  • OD Thread Turning OD Thread Turning (58)
  • Pipe Thread Pipe Thread (45)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (33)
  • Shoulder Roughing Shoulder Roughing (33)
  • Shoulder Square End Shoulder Square End (33)
  • Thread Milling Thread Milling (181)
  • Threading Threading (181)
Cutting Diameter
Cutting Diameter
  • 0.095 in (1)
  • 0.124 in (2)
  • 0.157 in (1)
  • 0.159 in (1)
  • 0.185 in (1)
  • 0.189 in (3)
  • 0.232 in (1)
  • 0.237 in (2)
  • 0.242 in (1)
  • 0.256 in (2)
  • 0.264 in (1)
  • 0.301 in (1)
  • 0.315 in (2)
  • 0.323 in (2)
  • 0.354 in (5)
  • 0.39 in (3)
  • 0.394 in (4)
  • 0.399 in (1)
  • 0.409 in (1)
  • 0.41 in (1)
  • 0.449 in (1)
  • 0.45 in (2)
  • 0.453 in (3)
  • 0.457 in (2)
  • 0.465 in (1)
  • 0.473 in (2)
  • 0.477 in (1)
  • 0.516 in (1)
  • 0.531 in (1)
  • 0.535 in (3)
  • 0.551 in (3)
  • 0.579 in (1)
  • 0.58 in (1)
  • 0.581 in (1)
  • 0.591 in (2)
  • 0.595 in (1)
  • 0.608 in (2)
  • 0.61 in (3)
  • 0.63 in (4)
  • 0.669 in (5)
  • 0.67 in (2)
  • 0.677 in (1)
  • 0.681 in (1)
  • 0.748 in (1)
  • 0.75 in (1)
  • 0.787 in (3)
  • 0.79 in (1)
  • 0.799 in (1)
  • 0.802 in (1)
  • 0.807 in (2)
  • 0.811 in (4)
  • 0.835 in (2)
  • 0.866 in (5)
  • 0.87 in (5)
  • 0.906 in (1)
  • 0.909 in (2)
  • 0.917 in (1)
  • 0.965 in (1)
  • 0.969 in (1)
  • 0.984 in (1)
  • 1.02 in (2)
  • 1.024 in (4)
  • 1.039 in (2)
  • 1.18 in (3)
  • 1.181 in (13)
  • 1.22 in (4)
  • 1.358 in (1)
  • 1.379 in (1)
  • 1.417 in (4)
  • 1.421 in (2)
  • 1.437 in (1)
  • 1.441 in (2)
  • 1.457 in (2)
  • 1.46 in (1)
  • 1.478 in (1)
  • 1.539 in (1)
  • 1.651 in (1)
  • 1.655 in (4)
  • 1.69 in (1)
  • 1.732 in (2)
  • 1.811 in (1)
  • 1.891 in (2)
  • 1.929 in (2)
  • 2.047 in (2)
  • 2.09 in (1)
  • 2.091 in (1)
  • 2.205 in (1)
  • 2.283 in (1)
  • 2.319 in (2)
  • 2.48 in (1)
Cutting Diameter Min - Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 2.401 mm (1)
  • 3.151 mm (2)
  • 4.0 mm (1)
  • 4.05 mm (1)
  • 4.7 mm (1)
  • 4.801 mm (3)
  • 5.9 mm (1)
  • 6.0 mm (2)
  • 6.15 mm (1)
  • 6.5 mm (2)
  • 6.7 mm (1)
  • 7.65 mm (1)
  • 8.0 mm (2)
  • 8.201 mm (2)
  • 9.0 mm (5)
  • 9.9 mm (3)
  • 10.0 mm (4)
  • 10.125 mm (1)
  • 10.351 mm (1)
  • 10.4 mm (1)
  • 11.4 mm (1)
  • 11.425 mm (2)
  • 11.5 mm (3)
  • 11.601 mm (2)
  • 11.8 mm (1)
  • 12.0 mm (2)
  • 12.101 mm (1)
  • 13.101 mm (1)
  • 13.5 mm (1)
  • 13.601 mm (3)
  • 14.0 mm (3)
  • 14.701 mm (1)
  • 14.726 mm (1)
  • 14.75 mm (1)
  • 15.0 mm (2)
  • 15.101 mm (1)
  • 15.451 mm (2)
  • 15.5 mm (3)
  • 16.0 mm (4)
  • 17.0 mm (5)
  • 17.026 mm (2)
  • 17.2 mm (1)
  • 17.3 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (3)
  • 20.076 mm (1)
  • 20.3 mm (1)
  • 20.375 mm (1)
  • 20.5 mm (2)
  • 20.6 mm (4)
  • 21.201 mm (2)
  • 22.0 mm (5)
  • 22.1 mm (5)
  • 23.0 mm (1)
  • 23.1 mm (2)
  • 23.3 mm (1)
  • 24.5 mm (1)
  • 24.6 mm (1)
  • 25.0 mm (1)
  • 25.901 mm (2)
  • 26.0 mm (4)
  • 26.401 mm (2)
  • 29.975 mm (3)
  • 30.0 mm (13)
  • 31.0 mm (4)
  • 34.5 mm (1)
  • 35.0 mm (1)
  • 36.0 mm (4)
  • 36.1 mm (2)
  • 36.5 mm (1)
  • 36.6 mm (2)
  • 37.0 mm (2)
  • 37.075 mm (1)
  • 37.551 mm (1)
  • 39.1 mm (1)
  • 41.901 mm (1)
  • 42.0 mm (4)
  • 42.926 mm (1)
  • 44.0 mm (2)
  • 46.0 mm (1)
  • 48.0 mm (2)
  • 49.0 mm (2)
  • 52.0 mm (2)
  • 53.075 mm (1)
  • 53.1 mm (1)
  • 56.0 mm (1)
  • 58.0 mm (1)
  • 58.901 mm (2)
  • 63.0 mm (1)
Cutting Diameter Min - Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 13.9 mm (1)
  • 14.0 mm (1)
  • 17.0 mm (1)
  • 17.026 mm (1)
  • 22.0 mm (1)
  • 22.1 mm (1)
  • 27.951 mm (1)
  • 28.0 mm (1)
  • 36.1 mm (1)
  • 39.075 mm (1)
  • 45.0 mm (1)
  • 49.0 mm (1)
Maximum Cutting Diameter Min - Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.547 in (1)
  • 0.551 in (1)
  • 0.669 in (1)
  • 0.67 in (1)
  • 0.866 in (1)
  • 0.87 in (1)
  • 1.1 in (1)
  • 1.102 in (1)
  • 1.421 in (1)
  • 1.538 in (1)
  • 1.772 in (1)
  • 1.929 in (1)
Maximum Cutting Diameter Min - Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.25 mm (1)
  • 8.725 mm (1)
  • 10.4 mm (4)
  • 10.775 mm (1)
  • 10.925 mm (4)
  • 11.0 mm (3)
  • 12.351 mm (1)
  • 16.0 mm (13)
  • 16.45 mm (1)
  • 16.825 mm (2)
  • 20.25 mm (1)
  • 20.451 mm (1)
  • 24.475 mm (1)
  • 24.701 mm (1)
  • 25.35 mm (1)
  • 26.925 mm (5)
  • 27.0 mm (6)
  • 28.0 mm (1)
  • 29.151 mm (1)
  • 32.15 mm (1)
  • 32.926 mm (1)
  • 36.7 mm (1)
  • 38.5 mm (2)
  • 41.151 mm (2)
Cutting Length Min - Cutting Length Max
Cutting Length
Cutting Length
  • 0.246 in (1)
  • 0.345 in (1)
  • 0.41 in (4)
  • 0.424 in (1)
  • 0.43 in (4)
  • 0.433 in (3)
  • 0.486 in (1)
  • 0.63 in (13)
  • 0.648 in (1)
  • 0.662 in (2)
  • 0.797 in (1)
  • 0.805 in (1)
  • 0.964 in (1)
  • 0.972 in (1)
  • 0.998 in (1)
  • 1.06 in (5)
  • 1.063 in (6)
  • 1.102 in (1)
  • 1.149 in (1)
  • 1.266 in (1)
  • 1.296 in (1)
  • 1.445 in (1)
  • 1.516 in (2)
  • 1.62 in (2)
Cutting Length Min - Cutting Length Max
Type of Thread
Type of Thread
  • BSPT (18)
  • BSW (99)
  • M (182)
  • MF (12)
  • NC/UNC (7)
  • NPS (15)
  • NPT (46)
  • NPTF (32)
  • UN (156)
Thread Size
Thread Size
  • 1/2-13 (1)
  • 1/4-20 (1)
  • 3/8-16 (1)
  • 5/16-18 (1)
  • 5/8-11 (1)
  • 7/16-14 (1)
  • 9/16-12 (1)
  • M10 X 1.0 (1)
  • M10 X 1.5 (1)
  • M10X1.5 (2)
  • M12 X 1.0 (1)
  • M12 X 1.5 (1)
  • M12 X 1.75 (1)
  • M12X1.25 (1)
  • M12X1.75 (2)
  • M14 X 1.5 (1)
  • M14 X 2.0 (1)
  • M14X1.5 (1)
  • M14X2 (1)
  • M16 X 1.5 (1)
  • M16 X 2.0 (1)
  • M16X2 (2)
  • M18 X 1.5 (1)
  • M20 X 1.5 (1)
  • M20 X 2.5 (1)
  • M3 X 0.5 (1)
  • M4 X 0.7 (1)
  • M4X0.7 (1)
  • M5 X 0.8 (1)
  • M5X0.8 (1)
  • M6 X 1 (1)
  • M6X1 (2)
  • M8 X 0.75 (1)
  • M8 X 1.0 (1)
  • M8 X 1.25 (1)
  • M8X1 (1)
  • M8X1.25 (2)
Reach
Reach
  • 0.378 in (1)
  • 0.466 in (1)
  • 0.472 in (1)
  • 0.473 in (3)
  • 0.52 in (1)
  • 0.579 in (1)
  • 0.61 in (2)
  • 0.648 in (1)
  • 0.662 in (1)
  • 0.669 in (2)
  • 0.678 in (1)
  • 0.698 in (1)
  • 0.725 in (1)
  • 0.787 in (1)
  • 0.79 in (1)
  • 0.797 in (1)
  • 0.805 in (1)
  • 0.807 in (1)
  • 0.836 in (1)
  • 0.866 in (2)
  • 0.87 in (2)
  • 0.906 in (1)
  • 0.909 in (1)
  • 0.931 in (1)
  • 0.964 in (1)
  • 0.972 in (1)
  • 0.984 in (1)
  • 0.994 in (1)
  • 0.998 in (1)
  • 1.0 in (1)
  • 1.02 in (2)
  • 1.024 in (4)
  • 1.042 in (1)
  • 1.088 in (1)
  • 1.098 in (1)
  • 1.102 in (3)
  • 1.149 in (1)
  • 1.181 in (2)
  • 1.191 in (2)
  • 1.26 in (2)
  • 1.266 in (1)
  • 1.296 in (1)
  • 1.319 in (2)
  • 1.341 in (1)
  • 1.348 in (1)
  • 1.379 in (1)
  • 1.417 in (2)
  • 1.421 in (1)
  • 1.445 in (1)
  • 1.449 in (1)
  • 1.457 in (1)
  • 1.496 in (2)
  • 1.5 in (1)
  • 1.567 in (1)
  • 1.575 in (4)
  • 1.579 in (3)
  • 1.62 in (2)
  • 1.68 in (1)
  • 1.689 in (2)
  • 1.69 in (1)
  • 1.693 in (10)
  • 1.701 in (3)
  • 1.732 in (1)
  • 1.752 in (1)
  • 1.77 in (1)
  • 1.772 in (3)
  • 1.78 in (1)
  • 1.788 in (1)
  • 1.891 in (2)
  • 1.969 in (5)
  • 2.0 in (3)
  • 2.031 in (2)
  • 2.047 in (1)
  • 2.15 in (1)
  • 2.165 in (4)
  • 2.201 in (2)
  • 2.283 in (1)
  • 2.559 in (7)
  • 2.561 in (1)
  • 2.567 in (1)
  • 2.575 in (2)
  • 2.693 in (1)
  • 2.961 in (1)
  • 2.969 in (1)
  • 3.15 in (4)
  • 3.209 in (1)
  • 3.358 in (2)
  • 3.362 in (2)
  • 3.531 in (1)
  • 3.598 in (1)
  • 3.622 in (1)
  • 3.858 in (1)
  • 3.938 in (1)
  • 3.95 in (1)
  • 3.954 in (1)
  • 4.0 in (1)
  • 4.055 in (1)
  • 4.059 in (1)
  • 4.346 in (1)
  • 5.039 in (2)
Reach Min - Reach Max
Reach
Reach
  • 9.601 mm (1)
  • 11.826 mm (1)
  • 11.951 mm (1)
  • 12.0 mm (3)
  • 13.201 mm (1)
  • 14.701 mm (1)
  • 15.5 mm (2)
  • 16.45 mm (1)
  • 16.825 mm (1)
  • 17.0 mm (2)
  • 17.225 mm (1)
  • 17.7 mm (1)
  • 18.425 mm (1)
  • 20.0 mm (1)
  • 20.076 mm (1)
  • 20.25 mm (1)
  • 20.451 mm (1)
  • 20.5 mm (1)
  • 21.225 mm (1)
  • 22.0 mm (2)
  • 22.1 mm (2)
  • 23.0 mm (1)
  • 23.1 mm (1)
  • 23.651 mm (1)
  • 24.475 mm (1)
  • 24.701 mm (1)
  • 25.0 mm (1)
  • 25.25 mm (1)
  • 25.35 mm (1)
  • 25.401 mm (1)
  • 25.901 mm (2)
  • 26.0 mm (4)
  • 26.475 mm (1)
  • 27.625 mm (1)
  • 27.901 mm (1)
  • 28.0 mm (3)
  • 29.151 mm (1)
  • 30.0 mm (2)
  • 30.25 mm (2)
  • 32.0 mm (2)
  • 32.15 mm (1)
  • 32.926 mm (1)
  • 33.5 mm (2)
  • 34.051 mm (1)
  • 34.25 mm (1)
  • 35.0 mm (1)
  • 36.0 mm (2)
  • 36.1 mm (1)
  • 36.7 mm (1)
  • 36.801 mm (1)
  • 37.0 mm (1)
  • 38.0 mm (2)
  • 38.1 mm (1)
  • 39.801 mm (1)
  • 40.0 mm (4)
  • 40.1 mm (3)
  • 41.151 mm (2)
  • 42.676 mm (1)
  • 42.901 mm (2)
  • 42.926 mm (1)
  • 43.0 mm (10)
  • 43.2 mm (3)
  • 44.0 mm (1)
  • 44.5 mm (1)
  • 44.95 mm (1)
  • 45.0 mm (3)
  • 45.2 mm (1)
  • 45.401 mm (1)
  • 48.0 mm (2)
  • 50.0 mm (5)
  • 50.801 mm (3)
  • 51.551 mm (2)
  • 52.0 mm (1)
  • 54.6 mm (1)
  • 55.0 mm (4)
  • 55.901 mm (2)
  • 58.0 mm (1)
  • 65.0 mm (7)
  • 65.05 mm (1)
  • 65.2 mm (1)
  • 65.4 mm (2)
  • 68.4 mm (1)
  • 75.2 mm (1)
  • 75.4 mm (1)
  • 80.0 mm (4)
  • 81.5 mm (1)
  • 85.301 mm (2)
  • 85.4 mm (2)
  • 89.65 mm (1)
  • 91.4 mm (1)
  • 92.0 mm (1)
  • 98.0 mm (1)
  • 100.0 mm (1)
  • 100.301 mm (1)
  • 100.4 mm (1)
  • 101.601 mm (1)
  • 103.0 mm (1)
  • 103.101 mm (1)
  • 110.4 mm (1)
  • 128.0 mm (2)
Reach Min - Reach Max