Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Limitli süre geçerli olan tekliflerimizle az ödeyip, daha çok frezeleyin. Şimdi Satın Alın.

TM40:

Filtreleri Seçin
Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (48)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (48)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (48)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (48)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (48)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (48)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (48)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (48)
  • M Stainless Steel (48)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (48)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (48)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (48)
  • K Cast Iron (48)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (48)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (48)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (48)
  • S High-Temp Alloys (36)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (36)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (36)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (36)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (36)
  • H Hardened Materials (26)
    • H1
      Hardened Materials 44-48 HRC (26)
Applications
Applications
  • ID Thread Turning ID Thread Turning (34)
  • OD Thread Turning OD Thread Turning (13)
  • Pipe Thread Pipe Thread (2)
  • Thread Milling Thread Milling (14)
  • Threading Threading (14)
Cutting Diameter
Cutting Diameter
  • 0.866 in (2)
  • 0.87 in (2)
  • 1.181 in (4)
  • 1.732 in (1)
  • 1.929 in (1)
  • 2.047 in (1)
  • 2.319 in (1)
Cutting Diameter Min - Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 22.0 mm (2)
  • 22.1 mm (2)
  • 30.0 mm (4)
  • 44.0 mm (1)
  • 49.0 mm (1)
  • 52.0 mm (1)
  • 58.901 mm (1)
Cutting Diameter Min - Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 45.0 mm (1)
  • 49.0 mm (1)
Maximum Cutting Diameter Min - Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 1.772 in (1)
  • 1.929 in (1)
Maximum Cutting Diameter Min - Maximum Cutting Diameter Max
Type of Thread
Type of Thread
  • BSPT (4)
  • BSW (17)
  • M (21)
  • NPT (5)
  • NPTF (5)
  • UN (24)
Reach
Reach
  • 1.693 in (2)
  • 1.891 in (2)
  • 1.969 in (3)
  • 2.0 in (1)
  • 2.15 in (1)
  • 2.165 in (1)
  • 2.559 in (2)
  • 3.15 in (2)
Reach Min - Reach Max
Reach
Reach
  • 43.0 mm (2)
  • 48.0 mm (2)
  • 50.0 mm (3)
  • 50.801 mm (1)
  • 54.6 mm (1)
  • 55.0 mm (1)
  • 65.0 mm (2)
  • 80.0 mm (2)
Reach Min - Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (12)
Tool Cutting Edge Angle Min - Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (6)
  • Weldon (8)
Number of Flutes
Number of Flutes
  • 3 (6)
  • 4 (2)
  • 6 (2)
  • 7 (2)
  • 8 (1)
  • 9 (1)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (10)
  • 2.0 (38)
Cutting Edges Per Insert Min - Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.891 in (2)
  • 1.969 in (3)
  • 2.0 in (1)
  • 4.0 in (1)
  • 4.016 in (1)
  • 4.551 in (1)
  • 4.606 in (1)
  • 4.87 in (1)
  • 4.882 in (1)
  • 5.351 in (1)
  • 5.591 in (1)
Over All Length [L] Min - Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 48.0 mm (2)
  • 50.0 mm (3)
  • 50.801 mm (1)
  • 101.601 mm (1)
  • 102.0 mm (1)
  • 115.601 mm (1)
  • 117.0 mm (1)
  • 123.7 mm (1)
  • 124.0 mm (1)
  • 135.9 mm (1)
  • 142.0 mm (1)
Over All Length [L] Min - Over All Length [L] Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC610M (36)
  • KC635M (26)
Hand Of Tool
Hand Of Tool
  • R (14)
Wiper Insert
Wiper Insert
  • N (34)
frontEnd
Cutting Width
Cutting Width
  • 1.476 in (1)
  • 1.478 in (2)
  • 1.496 in (2)
  • 1.5 in (10)
  • 1.536 in (6)
  • 1.545 in (4)
  • 1.55 in (2)
  • 1.555 in (2)
  • 1.563 in (3)
  • 1.571 in (2)
Cutting Width Min - Cutting Width Max
Cutting Width
Cutting Width
  • 37.5 mm (1)
  • 37.551 mm (2)
  • 38.0 mm (2)
  • 38.1 mm (10)
  • 39.0 mm (6)
  • 39.25 mm (4)
  • 39.375 mm (2)
  • 39.5 mm (2)
  • 39.7 mm (3)
  • 39.901 mm (2)
Cutting Width Min - Cutting Width Max
Thread TPI
Thread TPI
  • 8.0 (20)
  • 9.0 (13)
  • 10.0 (13)
  • 11.0 (18)
  • 11.5 (4)
  • 12.0 (15)
  • 14.0 (14)
  • 16.0 (15)
  • 18.0 (13)
  • 20.0 (14)
Thread TPI Min - Thread TPI Max
Thread Pitch
Thread Pitch
  • 1.0 mm (14)
  • 1.5 mm (14)
  • 2.0 mm (14)
  • 2.5 mm (13)
  • 3.0 mm (14)
Thread Pitch Min - Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.039 in (14)
  • 0.06 in (14)
  • 0.079 in (14)
  • 0.098 in (13)
  • 0.119 in (14)
Thread Pitch Min - Thread Pitch Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • TM-RECTANGLE THREAD MILL 90 (34)
Cutting Tool Material
Cutting Tool Material
  • H W (34)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (8)
  • SHELL MILL (6)
Back-End Diameter
Back-End Diameter
  • 19.0 mm (2)
  • 22.0 mm (2)
  • 25.0 mm (2)
  • 25.401 mm (3)
  • 27.0 mm (1)
  • 31.8 mm (2)
  • 32.0 mm (2)
Back-End Diameter Min - Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.748 in (2)
  • 0.866 in (2)
  • 0.984 in (2)
  • 1.0 in (3)
  • 1.063 in (1)
  • 1.252 in (2)
  • 1.26 in (2)
Back-End Diameter Min - Back-End Diameter Max
No filters matching ""

Kesici uçlar

(34) Kesici uçlar

Paralel Vida Dişi Frezeleri

(12) Paralel Vida Dişi Frezeleri

Konik Vida Dişi Frezeleri

(2) Konik Vida Dişi Frezeleri
öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
product-image
Please adjust the following properties from

ISO Katalog Numarası

ANSI Katalog Numarası

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Pano bilgilerinizi görmek için oturum açmalısınız
Session expired due to inactivity, please login again
Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Katalog Numarası Kalite    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Başarılı kaydınız için teşekkür ederiz. Artık hemen giriş yapabilir ve siteyi kullanabilirsiniz.

You are about to leave the Solution building process.

Are you sure you want to leave?