successfully added to cart
View Cart

Notifications

Mark all as read

Tournage

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (11228)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11202)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11202)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (11202)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (11203)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (11203)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (11227)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (11227)
  • M Stainless Steel (9330)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (9330)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (9330)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (9330)
  • K Cast Iron (9593)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (9553)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (9510)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (9190)
  • N Non-Ferrous Materials (7013)
    • N1
      Wrought Aluminum
      (6684)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (6551)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2435)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (6994)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6618)
    • N6
      Carbon, Graphite Composites, CFRP
      (6123)
    • N7
      MMC's
      (3485)
  • S High-Temp Alloys (9633)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (9420)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (9615)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (9433)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8701)
  • H Hardened Materials (5674)
    • H1
      Hardened Materials 44-48 HRC
      (5674)
    • H2
      Hardened Materials 48-55 HRC
      (5365)
    • H3
      Hardened Materials 56-60 HRC
      (3700)
    • H4
      Hardened Materials >60 HRC
      (2832)
Select First Choice
  • BR (219)
  • CN (1357)
  • DE (1428)
  • GB (865)
  • IN (571)
  • SG (628)
  • US (1587)
Applications
Applications
  • Back Boring Back Boring (230)
  • Boring Boring (1467)
  • CRT Profiling CRT Profiling (81)
  • Chamfer Turning Chamfer Turning (175)
  • Cut-Off Cut-Off (1172)
  • Deep Grooving Deep Grooving (90)
  • Drilling Drilling (1)
  • Face Grooving Face Grooving (3193)
  • Facing Facing (1843)
  • Grooving Grooving (3493)
  • ID Facing ID Facing (499)
  • ID Grooving ID Grooving (2400)
  • ID Thread Turning ID Thread Turning (324)
  • Multiple Direction Cutting Multiple Direction Cutting (3078)
  • OD Thread Turning OD Thread Turning (129)
  • Plunge Turning Plunge Turning (2344)
  • Profiling Profiling (2419)
  • TRN Boring TRN Boring (1421)
  • Threading Threading (131)
  • Turning Turning (3615)
Cutting Length
Cutting Length
  • 26.0 mm (1)
  • 32.0 mm (3)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 1.024 in (1)
  • 1.26 in (3)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (204)
  • ACME (139)
  • API (127)
  • API BUTTRESS (2)
  • API RD (99)
  • BSPT (4)
  • BSW (92)
  • BUTTRESS (192)
  • M (128)
  • NPT (90)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (92)
  • TR DIN 103 (6)
  • UN (196)
  • UNJ (90)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (7446)
  • Interrupted (1590)
  • Lightly Interrupted Cut (8670)
  • Smooth Cut (11165)
  • Stable (4)
  • Unstable (4)
  • Varying Depth of Cut (8938)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (240)
  • 48.0 (8)
  • 49.783 (2)
  • 50.0 (24)
  • 60.0 (34)
  • 62.5 (42)
  • 63.0 (19)
  • 72.5 (27)
  • 75.0 (362)
  • 85.0 (14)
  • 90.0 (2069)
  • 90.25 (10)
  • 91.0 (7)
  • 92.0 (4)
  • 92.25 (26)
  • 93.0 (802)
  • 95.0 (1129)
  • 97.0 (8)
  • 97.5 (1)
  • 100.0 (1)
  • 105.0 (1)
  • 107.5 (149)
  • 117.5 (22)
  • 140.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (214)
  • Boring Bar Shank (1078)
  • Cutoff Support Blade A1-A3 (80)
  • KM (496)
  • PSC (8)
  • Toolholder (2274)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (9170)
  • 1.0 (3115)
  • 2.0 (2468)
  • 3.0 (620)
  • 4.0 (1834)
  • 6.0 (391)
  • 8.0 (1085)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (110)
  • 0.002 in (16)
  • 0.003 in (5)
  • 0.004 in (233)
  • 0.005 in (17)
  • 0.006 in (25)
  • 0.007 in (85)
  • 0.008 in (1369)
  • 0.01 in (28)
  • 0.012 in (51)
  • 0.014 in (85)
  • 0.015 in (25)
  • 0.016 in (1732)
  • 0.02 in (70)
  • 0.023 in (200)
  • 0.024 in (1)
  • 0.03 in (158)
  • 0.031 in (2583)
  • 0.032 in (2)
  • 0.038 in (433)
  • 0.039 in (26)
  • 0.041 in (11)
  • 0.046 in (2)
  • 0.047 in (1165)
  • 0.048 in (2)
  • 0.049 in (1)
  • 0.05 in (102)
  • 0.051 in (129)
  • 0.057 in (43)
  • 0.06 in (27)
  • 0.061 in (9)
  • 0.062 in (14)
  • 0.063 in (467)
  • 0.065 in (7)
  • 0.066 in (86)
  • 0.069 in (1)
  • 0.07 in (4)
  • 0.076 in (201)
  • 0.078 in (15)
  • 0.079 in (15)
  • 0.08 in (165)
  • 0.081 in (13)
  • 0.089 in (68)
  • 0.09 in (68)
  • 0.094 in (250)
  • 0.096 in (8)
  • 0.097 in (47)
  • 0.098 in (15)
  • 0.099 in (8)
  • 0.1 in (1909)
  • 0.102 in (914)
  • 0.109 in (1)
  • 0.116 in (43)
  • 0.117 in (43)
  • 0.119 in (20)
  • 0.12 in (16)
  • 0.125 in (83)
  • 0.126 in (6)
  • 0.127 in (86)
  • 0.128 in (5)
  • 0.13 in (60)
  • 0.131 in (86)
  • 0.132 in (86)
  • 0.133 in (86)
  • 0.15 in (117)
  • 0.152 in (90)
  • 0.156 in (9)
  • 0.157 in (134)
  • 0.158 in (12)
  • 0.159 in (9)
  • 0.16 in (42)
  • 0.165 in (124)
  • 0.173 in (86)
  • 0.177 in (20)
  • 0.178 in (168)
  • 0.18 in (102)
  • 0.185 in (36)
  • 0.188 in (70)
  • 0.19 in (192)
  • 0.191 in (197)
  • 0.197 in (25)
  • 0.198 in (90)
  • 0.2 in (2941)
  • 0.202 in (122)
  • 0.203 in (1472)
  • 0.21 in (4)
  • 0.224 in (86)
  • 0.235 in (86)
  • 0.237 in (35)
  • 0.244 in (43)
  • 0.25 in (241)
  • 0.251 in (86)
  • 0.254 in (160)
  • 0.269 in (86)
  • 0.282 in (86)
  • 0.284 in (86)
  • 0.3 in (442)
  • 0.305 in (2)
  • 0.311 in (2)
  • 0.313 in (8)
  • 0.315 in (123)
  • 0.318 in (127)
  • 0.33 in (86)
  • 0.34 in (247)
  • 0.343 in (38)
  • 0.356 in (86)
  • 0.375 in (23)
  • 0.38 in (102)
  • 0.381 in (82)
  • 0.394 in (50)
  • 0.396 in (3)
  • 0.397 in (2220)
  • 0.4 in (3763)
  • 0.404 in (86)
  • 0.406 in (206)
  • 0.43 in (86)
  • 0.432 in (2)
  • 0.445 in (124)
  • 0.472 in (43)
  • 0.49 in (86)
  • 0.492 in (12)
  • 0.5 in (172)
  • 0.508 in (86)
  • 0.52 in (1)
  • 0.565 in (20)
  • 0.57 in (43)
  • 0.572 in (127)
  • 0.575 in (81)
  • 0.6 in (121)
  • 0.63 in (8)
  • 0.65 in (1)
  • 0.7 in (4)
  • 0.703 in (24)
  • 0.75 in (68)
  • 0.787 in (174)
  • 0.79 in (337)
  • 0.791 in (70)
  • 0.792 in (522)
  • 0.794 in (2321)
  • 0.795 in (28)
  • 0.8 in (3733)
  • 0.826 in (12)
  • 0.84 in (52)
  • 0.902 in (124)
  • 0.93 in (2)
  • 0.99 in (1)
  • 1.0 in (405)
  • 1.06 in (161)
  • 1.18 in (28)
  • 1.188 in (179)
  • 1.19 in (537)
  • 1.191 in (1793)
  • 1.194 in (161)
  • 1.195 in (43)
  • 1.2 in (2610)
  • 1.21 in (12)
  • 1.22 in (16)
  • 1.25 in (154)
  • 1.5 in (457)
  • 1.525 in (67)
  • 1.56 in (225)
  • 1.585 in (86)
  • 1.587 in (361)
  • 1.588 in (1490)
  • 1.59 in (312)
  • 1.6 in (1896)
  • 1.65 in (225)
  • 1.75 in (154)
  • 1.98 in (43)
  • 1.981 in (86)
  • 1.984 in (7)
  • 2.0 in (365)
  • 2.025 in (52)
  • 2.06 in (180)
  • 2.25 in (124)
  • 2.37 in (180)
  • 2.375 in (13)
  • 2.38 in (372)
  • 2.381 in (220)
  • 2.388 in (124)
  • 2.39 in (18)
  • 2.4 in (794)
  • 2.44 in (180)
  • 2.5 in (249)
  • 2.525 in (41)
  • 2.56 in (169)
  • 3.0 in (181)
  • 3.025 in (38)
  • 3.06 in (129)
  • 3.17 in (129)
  • 3.175 in (140)
  • 3.18 in (140)
  • 3.2 in (333)
  • 3.24 in (129)
  • 3.96 in (28)
  • 3.969 in (16)
  • 3.97 in (16)
  • 4.0 in (129)
  • 4.025 in (16)
  • 4.03 in (28)
  • 4.06 in (28)
  • 4.76 in (25)
  • 4.7625 in (61)
  • 4.763 in (13)
  • 4.8 in (3)
  • 5.0 in (96)
  • 5.025 in (12)
  • 6.0 in (82)
  • 6.35 in (101)
  • 7.9375 in (13)
  • 7.94 in (3)
  • 8.0 in (5)
  • 9.525 in (20)
  • 10.0 in (4)
  • 12.5 in (6)
  • 12.7 in (15)
  • 16.0 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (110)
  • 0.03 mm (156)
  • 0.038 mm (433)
  • 0.05 mm (118)
  • 0.051 mm (129)
  • 0.057 mm (43)
  • 0.066 mm (86)
  • 0.07 mm (4)
  • 0.076 mm (206)
  • 0.08 mm (158)
  • 0.081 mm (4)
  • 0.089 mm (68)
  • 0.09 mm (68)
  • 0.094 mm (86)
  • 0.097 mm (47)
  • 0.1 mm (2133)
  • 0.102 mm (914)
  • 0.116 mm (43)
  • 0.117 mm (43)
  • 0.125 mm (17)
  • 0.127 mm (86)
  • 0.13 mm (60)
  • 0.131 mm (86)
  • 0.132 mm (86)
  • 0.133 mm (86)
  • 0.15 mm (117)
  • 0.151 mm (25)
  • 0.152 mm (90)
  • 0.157 mm (86)
  • 0.16 mm (42)
  • 0.165 mm (124)
  • 0.173 mm (86)
  • 0.176 mm (85)
  • 0.177 mm (20)
  • 0.178 mm (168)
  • 0.18 mm (102)
  • 0.185 mm (36)
  • 0.19 mm (192)
  • 0.191 mm (197)
  • 0.198 mm (86)
  • 0.2 mm (4310)
  • 0.202 mm (122)
  • 0.203 mm (1472)
  • 0.21 mm (4)
  • 0.224 mm (86)
  • 0.235 mm (86)
  • 0.244 mm (43)
  • 0.25 mm (150)
  • 0.251 mm (86)
  • 0.254 mm (160)
  • 0.269 mm (86)
  • 0.282 mm (86)
  • 0.284 mm (86)
  • 0.3 mm (442)
  • 0.301 mm (51)
  • 0.305 mm (2)
  • 0.315 mm (106)
  • 0.318 mm (127)
  • 0.325 mm (84)
  • 0.33 mm (86)
  • 0.34 mm (247)
  • 0.343 mm (38)
  • 0.351 mm (1)
  • 0.356 mm (86)
  • 0.375 mm (25)
  • 0.38 mm (102)
  • 0.381 mm (82)
  • 0.394 mm (32)
  • 0.396 mm (3)
  • 0.397 mm (2220)
  • 0.4 mm (5495)
  • 0.404 mm (86)
  • 0.406 mm (206)
  • 0.43 mm (86)
  • 0.432 mm (2)
  • 0.445 mm (124)
  • 0.472 mm (43)
  • 0.49 mm (86)
  • 0.5 mm (230)
  • 0.508 mm (86)
  • 0.52 mm (1)
  • 0.565 mm (20)
  • 0.57 mm (43)
  • 0.572 mm (127)
  • 0.575 mm (81)
  • 0.576 mm (200)
  • 0.6 mm (121)
  • 0.601 mm (1)
  • 0.65 mm (1)
  • 0.7 mm (4)
  • 0.703 mm (24)
  • 0.75 mm (70)
  • 0.775 mm (65)
  • 0.787 mm (174)
  • 0.79 mm (337)
  • 0.791 mm (70)
  • 0.792 mm (522)
  • 0.794 mm (2321)
  • 0.795 mm (28)
  • 0.8 mm (6251)
  • 0.826 mm (14)
  • 0.84 mm (52)
  • 0.902 mm (124)
  • 0.93 mm (2)
  • 0.99 mm (1)
  • 1.0 mm (431)
  • 1.05 mm (11)
  • 1.06 mm (161)
  • 1.175 mm (2)
  • 1.18 mm (28)
  • 1.188 mm (179)
  • 1.19 mm (537)
  • 1.191 mm (1793)
  • 1.194 mm (161)
  • 1.195 mm (43)
  • 1.2 mm (2610)
  • 1.201 mm (1165)
  • 1.21 mm (12)
  • 1.22 mm (16)
  • 1.225 mm (2)
  • 1.25 mm (155)
  • 1.5 mm (476)
  • 1.525 mm (67)
  • 1.526 mm (8)
  • 1.55 mm (9)
  • 1.56 mm (225)
  • 1.576 mm (14)
  • 1.585 mm (86)
  • 1.587 mm (361)
  • 1.588 mm (1490)
  • 1.59 mm (312)
  • 1.6 mm (2363)
  • 1.65 mm (225)
  • 1.651 mm (7)
  • 1.75 mm (155)
  • 1.975 mm (15)
  • 1.98 mm (43)
  • 1.981 mm (86)
  • 1.984 mm (7)
  • 2.0 mm (380)
  • 2.025 mm (59)
  • 2.051 mm (9)
  • 2.06 mm (180)
  • 2.25 mm (124)
  • 2.37 mm (180)
  • 2.375 mm (41)
  • 2.38 mm (372)
  • 2.381 mm (220)
  • 2.388 mm (124)
  • 2.39 mm (18)
  • 2.4 mm (794)
  • 2.401 mm (136)
  • 2.44 mm (180)
  • 2.45 mm (8)
  • 2.5 mm (264)
  • 2.525 mm (41)
  • 2.526 mm (8)
  • 2.551 mm (9)
  • 2.56 mm (169)
  • 2.776 mm (1)
  • 3.0 mm (201)
  • 3.025 mm (38)
  • 3.026 mm (7)
  • 3.051 mm (9)
  • 3.06 mm (129)
  • 3.17 mm (129)
  • 3.175 mm (140)
  • 3.176 mm (83)
  • 3.18 mm (140)
  • 3.2 mm (339)
  • 3.24 mm (129)
  • 3.25 mm (5)
  • 3.95 mm (7)
  • 3.96 mm (28)
  • 3.969 mm (16)
  • 3.97 mm (16)
  • 3.975 mm (2)
  • 4.0 mm (177)
  • 4.025 mm (28)
  • 4.03 mm (28)
  • 4.05 mm (9)
  • 4.06 mm (28)
  • 4.76 mm (25)
  • 4.7625 mm (61)
  • 4.763 mm (13)
  • 4.775 mm (70)
  • 4.8 mm (3)
  • 5.0 mm (121)
  • 5.025 mm (16)
  • 6.0 mm (117)
  • 6.35 mm (101)
  • 6.351 mm (119)
  • 7.9 mm (2)
  • 7.9375 mm (13)
  • 7.94 mm (3)
  • 7.95 mm (8)
  • 8.0 mm (22)
  • 9.525 mm (43)
  • 10.0 mm (22)
  • 12.5 mm (18)
  • 12.7 mm (15)
  • 12.701 mm (12)
  • 16.0 mm (10)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (9668)
  • 0.66 mm (1)
  • 0.69 mm (1)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (9668)
  • 0.66 in (1)
  • 0.69 in (1)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (2845)
  • Interrupted (8)
  • Lightly Interrupted Cut (3878)
  • Smooth Cut (6342)
  • Varying Depth of Cut (4163)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (1487)
  • 241 (361)
  • AC5 (96)
  • CG4 (58)
  • CG5 (23)
  • CG6 (3)
  • CL4 (951)
  • CM1 (23)
  • CM2 (1427)
  • CM3 (1176)
  • CM4 (794)
  • CM5 (101)
  • CPX (1362)
  • CW2 (633)
  • CW2015 (431)
  • CW3020 (15)
  • CW5025 (489)
  • GH1 (93)
  • GH2 (8)
  • GX (858)
  • HCK10 (27)
  • HK1500 (353)
  • HK35 (32)
  • HT2 (1070)
  • HTX (920)
  • HWK10 (9)
  • HWK15 (29)
  • K00326 (29)
  • K00331 (4)
  • K00379 (103)
  • K060 (898)
  • K090 (1807)
  • K1 (707)
  • K1010P (93)
  • K1025 (106)
  • K10M (2042)
  • K10P (1823)
  • K10U (1790)
  • K11 (49)
  • K110M (52)
  • K15U (1756)
  • K20K (2013)
  • K21 (981)
  • K25M (1770)
  • K25P (1740)
  • K2884 (12)
  • K2885 (232)
  • K313 (4679)
  • K35P (1009)
  • K40 (11)
  • K420 (1863)
  • K45 (1118)
  • K4H (118)
  • K6 (113)
  • K68 (3180)
  • K8 (6)
  • K8735 (97)
  • KB1340 (655)
  • KB1345 (1087)
  • KB1610 (1663)
  • KB1625 (1161)
  • KB1630 (1498)
  • KB5610 (1399)
  • KB5625 (1762)
  • KB5630 (1129)
  • KB9610 (1858)
  • KB9640 (793)
  • KBH10 (1685)
  • KBH10B (969)
  • KBH20 (2063)
  • KBH20B (970)
  • KBK35 (393)
  • KBK45 (57)
  • KC210 (1199)
  • KC250 (1566)
  • KC5010 (4484)
  • KC5020P (256)
  • KC5025 (4021)
  • KC5115RR (2)
  • KC5125RR (2)
  • KC514M (8)
  • KC525M (174)
  • KC5410 (2887)
  • KC5510 (1807)
  • KC5525 (1058)
  • KC710 (897)
  • KC7140 (4)
  • KC715M (17)
  • KC720 (2556)
  • KC7210 (4)
  • KC7215 (4)
  • KC722 (557)
  • KC725M (1215)
  • KC730 (3685)
  • KC7310 (2168)
  • KC732 (2485)
  • KC735M (101)
  • KC740 (42)
  • KC7815 (4)
  • KC792M (27)
  • KC8050 (3114)
  • KC810 (3140)
  • KC850 (3660)
  • KC9010 (2435)
  • KC9025 (3017)