Mill 1-18™ End Mills • Steep Taper CV40 • Inch

Indexable End Mills

Features and benefits

Fraisage de parois à 90°.

Angles de ramping dynamiques.

Etat de surface supérieur.

Vitesses de rotation élevées.

Uses and application

Surfaçage
Fraisage hélicoïdal
Ramping : Ébauche
Rainurage : Bout plat
Fraisage de côté/avec épaulement : Bout plat
Usinage de poches
Queue — SK CAT(CV) ANSI B5.50
Fraisage — Arrosage interne

Workpiece Materials

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

Displaying 1- 6 of 6 results

Select Columns

Metric

Inch

Show

Metric

Inch

SAP Material Number	ISO Catalog Number	ANSI Catalog Number	[CSMS] System Size Machine Side	[D1] Effective Cutting Diameter	[D1] Effective Cutting Diameter	[L1] Gage Length	[L1] Gage Length	[L3] Usable Length	[L3] Usable Length	[AP1MAX] 1st Maximum Cutting Depth	[AP1MAX] 1st Maximum Cutting Depth	Number of Inserts	Maximum Ramping Angle	Weight Pounds	Max RPM
2267549	25A2R051H40SED18-U	M1D100E1802CV40L250	CV40	25.4000	1.000	63.5000	2.500	41.2800	1.625	18.0000	.7100	2	16.700	1.98	37000
List price: $415.74 /each. Your price:: Qty Oops! we don't have that many in stock. Adjusted to meet the minimum package size.
2267551	32A3R065H40SED18-U	M1D125E1803CV40L288	CV40	31.8000	1.250	73.0300	2.875	50.8000	2.000	18.0000	.7100	3	10.900	2.20	32300
List price: $430.85 /each. Your price:: Qty Oops! we don't have that many in stock. Adjusted to meet the minimum package size.
2267548	40A4R065H40SED18-U	M1D150E1804CV40L288	CV40	38.1000	1.500	73.0300	2.875	50.8000	2.000	18.0000	.7100	4	8.200	2.36	29020
List price: $497.09 /each. Your price:: Qty Oops! we don't have that many in stock. Adjusted to meet the minimum package size.
2541967	M1D100E1802CV40L450	M1D100E1802CV40L450	CV40	25.4000	1.000	114.3000	4.500	66.6800	2.625	18.0000	.7100	2	16.700	2.72	37000
List price: $442.52 /each. Your price:: Qty Oops! we don't have that many in stock. Adjusted to meet the minimum package size.
2541970	M1D125E1803CV40L488	M1D125E1803CV40L488	CV40	31.8000	1.250	123.8300	4.875	76.2000	3.000	18.0000	.7100	3	10.900	3.03	32300
List price: $456.57 /each. Your price:: Qty Oops! we don't have that many in stock. Adjusted to meet the minimum package size.
2541972	M1D150E1804CV40L488	M1D150E1804CV40L488	CV40	38.1000	1.500	123.8300	4.875	76.2000	3.000	18.0000	.7100	4	8.200	3.41	29020
List price: $497.09 /each. Your price:: Qty Oops! we don't have that many in stock. Adjusted to meet the minimum package size.

Grades

Guide de sélection des plaquettes

Material Group	LightMachining		GeneralPurpose		HeavyMachining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance				toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.E..GD	KCPM40	.S..GD	KCPM40	.E..HD	KCPM40
P3–P4	.E..GD	KCPK30	.S..GD	KCPK30	.E..HD	KCPK30
P5–P6	.E..GD	KC725M	.S..GD	KC725M	.E..HD	KC725M
M1–M2	.E..GD	KCSM40	.S..GD	KCSM40	.E..HD	KCSM40
M3	.E..GD	KCPM40	.S..GD	KCPM40	.E..HD	KCPM40
K1–K2	.E..GD	KC520M	.E..GD	KC520M	.S..GD	KCK15
K3	.E..GD	KC520M	.S..GD	KCK15	.E..HD	KCPK30
N1–N2	.F..LDJ	KC410M	.E..LDJ	KC422M	.E..LDJ	KC422M
N3	.F..LDJ	KC410M	.F..LDJ	KC410M	.F..LDJ	KC410M
S1–S2	.E..GD	KC725M	.S..GD	KC725M	.E..HD	KC725M
S3	.E..GD	KCSM40	.S..GD	KCSM40	.E..HD	KCSM40
S4	.E..GD	KCSM40	.S..GD	KCSM40	.E..HD	KCSM40
H1	–	–	–	–	–	–

Avances de départ recommandées [mm]

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.F..LDJ	0,12	0,46	0,82	0,08	0,33	0,59	0,06	0,25	0,44	0,06	0,22	0,38	0,05	0,20	0,35	.F..LDJ
.E..LDJ	0,12	0,45	0,80	0,08	0,33	0,58	0,06	0,24	0,43	0,06	0,21	0,38	0,05	0,20	0,35	.E..LDJ
.E..LD	0,17	0,47	0,82	0,12	0,34	0,59	0,09	0,26	0,44	0,08	0,22	0,38	0,07	0,20	0,35	.E..LD
.E..GD	0,23	0,52	0,89	0,17	0,37	0,64	0,13	0,28	0,48	0,11	0,24	0,42	0,10	0,22	0,38	.E..GD
.S..GE	0,23	0,51	0,89	0,17	0,37	0,64	0,13	0,27	0,48	0,11	0,24	0,42	0,10	0,22	0,38	.S..GE
.S..GD	0,23	0,51	0,89	0,17	0,37	0,64	0,13	0,28	0,48	0,11	0,24	0,41	0,10	0,22	0,38	.S..GD
.E..HD	0,23	0,59	0,95	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,25	0,41	.E..HD

LightMachining

GeneralPurpose

HeavyMachining

Recommended Starting Feeds [IPT]

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.F..LDJ	.005	.019	.033	.003	.013	.023	.003	.010	.018	.002	.009	.015	.002	.008	.014	.F..LDJ
.E..LDJ	.005	.018	.032	.003	.013	.023	.003	.010	.017	.002	.009	.015	.002	.008	.014	.E..LDJ
.E..LD	.007	.019	.032	.005	.013	.023	.004	.010	.017	.003	.009	.015	.003	.008	.014	.E..LD
.E..GD	.009	.020	.035	.007	.015	.025	.005	.011	.019	.004	.010	.016	.004	.009	.015	.E..GD
.S..GE	.009	.020	.035	.007	.014	.025	.005	.011	.019	.004	.009	.017	.004	.009	.015	.S..GE
.S..GD	.009	.020	.035	.007	.015	.025	.005	.011	.019	.004	.009	.016	.004	.009	.015	.S..GD
.E..HD	.009	.023	.037	.007	.017	.027	.005	.013	.020	.004	.011	.017	.004	.010	.016	.E..HD

LightMachining

GeneralPurpose

HeavyMachining

Vitesses de départ recommandées [m/mn]

Material Group		KC410M			KC422M			KC520M			KC522M			KC525M			KC725M			KCK15			KCPM20			KCPK30
P	1	–	–	–	–	–	–	–	–	–	330	285	270	220	200	180	260	230	215	–	–	–	550	485	450	455	395	370
	2	–	–	–	–	–	–	–	–	–	275	240	200	180	160	150	220	190	160	–	–	–	340	310	275	280	255	230
	3	–	–	–	–	–	–	–	–	–	255	215	175	160	150	140	200	170	140	–	–	–	310	275	255	255	230	205
	4	–	–	–	–	–	–	–	–	–	225	185	150	140	130	120	180	150	120	–	–	–	230	215	190	190	175	160
	5	–	–	–	–	–	–	–	–	–	185	170	150	150	140	130	150	135	120	–	–	–	275	250	230	260	230	210
	6	–	–	–	–	–	–	–	–	–	165	125	100	130	120	110	130	100	80	–	–	–	190	170	145	160	135	–
M	1	–	–	–	–	–	–	–	–	–	205	180	165	150	140	130	170	150	135	–	–	–	225	200	175	205	185	155
	2	–	–	–	–	–	–	–	–	–	185	160	130	130	120	110	155	130	110	–	–	–	205	175	160	185	160	140
	3	–	–	–	–	–	–	–	–	–	140	120	95	90	80	70	115	100	80	–	–	–	160	145	125	145	130	115
K	1	–	–	–	–	–	–	270	245	215	230	205	185	–	–	–	–	–	–	420	385	340	360	325	295	295	265	240
	2	–	–	–	–	–	–	210	190	175	180	160	150	–	–	–	–	–	–	335	295	275	285	255	235	235	210	190
	3	–	–	–	–	–	–	175	160	145	150	135	120	–	–	–	–	–	–	280	250	230	240	215	200	195	175	160
N	1–2	1215	1080	995	1075	945	875	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	1080	995	915	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	40	35	25	60	55	50	35	30	25	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	40	35	25	60	55	50	35	30	25	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	50	40	25	50	45	40	45	35	25	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	–	–	–	70	50	35	60	50	40	60	45	30	–	–	–	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	120	90	70	–	–	–	–	–	–	–	–	–	140	115	95	–	–	–

Recommended Starting Speeds [SFM]

Material Group		KC410M			KC422M			KC520M			KC522M			KC525M			KC725M			KCK15			KCPM20			KCPK30
P	1	–	–	–	–	–	–	–	–	–	1080	940	880	720	660	590	860	750	700	–	–	–	1810	1590	1470	1485	1300	1210
	2	–	–	–	–	–	–	–	–	–	900	790	660	590	520	490	720	630	530	–	–	–	1120	1010	910	920	830	750
	3	–	–	–	–	–	–	–	–	–	830	700	580	520	490	460	660	560	460	–	–	–	1010	910	830	830	750	680
	4	–	–	–	–	–	–	–	–	–	740	610	490	460	430	390	590	490	390	–	–	–	760	700	630	620	575	520
	5	–	–	–	–	–	–	–	–	–	610	550	490	490	460	430	490	440	390	–	–	–	910	820	750	850	760	690
	6	–	–	–	–	–	–	–	–	–	540	410	330	430	390	360	430	330	260	–	–	–	630	550	475	520	450	–
M	1	–	–	–	–	–	–	–	–	–	670	590	540	490	460	430	560	490	450	–	–	–	730	655	570	680	600	515
	2	–	–	–	–	–	–	–	–	–	610	520	430	430	390	360	510	430	360	–	–	–	670	580	520	610	530	460
	3	–	–	–	–	–	–	–	–	–	460	400	310	300	260	230	380	330	260	–	–	–	530	475	410	475	430	380
K	1	–	–	–	–	–	–	880	800	710	750	680	600	–	–	–	–	–	–	1380	1255	1115	1180	1070	960	965	875	780
	2	–	–	–	–	–	–	690	620	580	590	530	490	–	–	–	–	–	–	1095	975	910	940	840	770	770	690	630
	3	–	–	–	–	–	–	580	520	470	490	440	400	–	–	–	–	–	–	920	815	750	790	700	650	645	575	530
N	1–2	3990	3550	3270	3520	3100	2870	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	3550	3270	3000	3100	2870	2500	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	130	120	90	200	180	160	115	100	80	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	130	120	90	200	180	160	115	100	80	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	170	130	90	160	150	130	150	115	80	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	–	–	–	230	170	120	200	160	130	200	150	100	–	–	–	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	390	300	230	–	–	–	–	–	–	–	–	–	460	380	310	–	–	–

Exemples d'application

insert style	cutting diameter	max ramp angle	DH min (min hole diameter)	DHI min (min flat-bottomed hole diameter)	max diameter (no flat bottom)
Mill-1, 18mm	25	17˚	29,24	45,84	50
Mill-1, 18mm	32	11˚	42,98	59,84	64
Mill-1, 18mm	40	8˚	58,92	75,84	80
Mill-1, 18mm	50	5˚	78,88	95,84	100
Mill-1, 18mm	63	4˚	104,86	121,84	126
Mill-1, 18mm	80	3˚	139,02	156,5	160
Mill-1, 18mm	100	2˚	179,00	196,5	200
Mill-1, 18mm	125	2˚	228,98	246,5	250
Mill-1, 18mm	160	1˚	298,98	316,5	320

Application Examples

insert style	cutting diameter	max ramp angle	DH min (min hole diameter)	DHI min (min flat-bottomed hole diameter)	max diameter (no flat bottom)
Mill 1–18	.970	18˚	1.124	1.776	1.94
Mill 1–18	1.000	17˚	1.182	1.836	2.00
Mill 1–18	1.250	11˚	1.686	2.336	2.50
Mill 1–18	1.500	8˚	2.182	2.836	3.00
Mill 1–18	2.000	5˚	3.180	3.836	4.00
Mill 1–18	1.500	8˚	2.180	2.836	3.00
Mill 1–18	2.000	5˚	3.176	3.862	4.00
Mill 1–18	2.500	4˚	4.174	4.862	5.00
Mill 1–18	3.000	3˚	5.174	5.862	6.00
Mill 1–18	4.000	2˚	7.174	7.862	8.00
Mill 1–18	5.000	2˚	9.172	9.862	10.00
Mill 1–18	6.000	1˚	11.172	11.862	12.00
Mill 1–18	8.000	1˚	15.172	15.862	16.00

Suggestions

Product Suggestions

Product Categories

Resources

Notifications

Mill 1-18™ End Mills • Steep Taper CV40 • Inch

Indexable End Mills

Features and benefits

Uses and application

Workpiece Materials

Grades

Guide de sélection des plaquettes

Avances de départ recommandées [mm]

Recommended Starting Feeds [IPT]

Vitesses de départ recommandées [m/mn]

Recommended Starting Speeds [SFM]

Exemples d'application

Application Examples

Assistance

Boutique

Carrières

✉ Gardons le contact

⤓ NOVO App

Suggestions

Product Suggestions

Product Categories

Resources

Notifications

Mill 1-18™ End Mills • Steep Taper CV40 • Inch

Indexable End Mills

Features and benefits

Uses and application

Workpiece Materials

Grades

Guide de sélection des plaquettes

Avances de départ recommandées [mm]

Recommended Starting Feeds [IPT]

Vitesses de départ recommandées [m/mn]

Recommended Starting Speeds [SFM]

Exemples d'application

Application Examples

Assistance

Boutique

Carrières

✉ Gardons le contact

⤓ NOVO App

The following CAD files are available