Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

KM4X100™

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (50)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (50)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (50)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (50)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (50)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (50)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (50)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (50)
  • M Stainless Steel (50)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (50)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (50)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (50)
  • K Cast Iron (50)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (50)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (50)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (50)
  • N Non-Ferrous Materials (43)
    • N1
      Wrought Aluminum
      (39)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (39)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (14)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (41)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (37)
    • N6
      Carbon, Graphite Composites, CFRP
      (34)
    • N7
      MMC's
      (35)
  • S High-Temp Alloys (50)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (50)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (50)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (50)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (50)
  • H Hardened Materials (33)
    • H1
      Hardened Materials 44-48 HRC
      (33)
    • H2
      Hardened Materials 48-55 HRC
      (29)
    • H3
      Hardened Materials 56-60 HRC
      (29)
    • H4
      Hardened Materials >60 HRC
      (24)
Applications
Applications
  • Chamfer Turning Chamfer Turning (13)
  • Deep Grooving Deep Grooving (8)
  • Facing Facing (43)
  • Grooving Grooving (8)
  • ID Facing ID Facing (25)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (44)
  • OD Thread Turning OD Thread Turning (8)
  • Plunge Turning Plunge Turning (11)
  • Profiling Profiling (30)
  • TRN Boring TRN Boring (33)
  • Turning Turning (44)
Type of Thread
Type of Thread
  • 60 (4)
  • ACME (6)
  • API (4)
  • API RD (4)
  • BSW (2)
  • BUTTRESS (4)
  • M (2)
  • NPT (2)
  • STUB ACME (2)
  • UN (4)
  • UNJ (2)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (48)
  • Interrupted (22)
  • Lightly Interrupted Cut (48)
  • Smooth Cut (48)
  • Varying Depth of Cut (48)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 75.0 (11)
  • 90.0 (17)
  • 93.0 (10)
  • 95.0 (12)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (19)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (23)
  • 2.0 (38)
  • 3.0 (2)
  • 4.0 (31)
  • 6.0 (2)
  • 8.0 (27)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (1)
  • 0.0023 in (1)
  • 0.0026 in (2)
  • 0.003 in (4)
  • 0.0031 in (2)
  • 0.0037 in (2)
  • 0.0038 in (1)
  • 0.004 in (10)
  • 0.0046 in (2)
  • 0.005 in (2)
  • 0.0052 in (2)
  • 0.0053 in (2)
  • 0.0059 in (2)
  • 0.006 in (2)
  • 0.0062 in (2)
  • 0.0065 in (4)
  • 0.0068 in (2)
  • 0.007 in (2)
  • 0.0075 in (4)
  • 0.0078 in (2)
  • 0.0079 in (1)
  • 0.008 in (6)
  • 0.0083 in (2)
  • 0.0088 in (2)
  • 0.0093 in (2)
  • 0.0096 in (1)
  • 0.0099 in (2)
  • 0.01 in (4)
  • 0.0106 in (2)
  • 0.0111 in (2)
  • 0.0112 in (2)
  • 0.0118 in (2)
  • 0.0124 in (2)
  • 0.0125 in (6)
  • 0.013 in (6)
  • 0.0135 in (4)
  • 0.014 in (2)
  • 0.0156 in (12)
  • 0.0159 in (2)
  • 0.016 in (12)
  • 0.017 in (2)
  • 0.0175 in (4)
  • 0.0186 in (1)
  • 0.0193 in (2)
  • 0.02 in (2)
  • 0.0225 in (6)
  • 0.031 in (24)
  • 0.0312 in (10)
  • 0.0313 in (26)
  • 0.0315 in (2)
  • 0.0325 in (4)
  • 0.0355 in (4)
  • 0.0394 in (2)
  • 0.0468 in (4)
  • 0.0469 in (26)
  • 0.047 in (26)
  • 0.0472 in (2)
  • 0.0492 in (2)
  • 0.0591 in (2)
  • 0.0623 in (4)
  • 0.0625 in (35)
  • 0.063 in (24)
  • 0.0689 in (2)
  • 0.078 in (2)
  • 0.0787 in (4)
  • 0.0886 in (4)
  • 0.0928 in (4)
  • 0.0938 in (25)
  • 0.094 in (27)
  • 0.0984 in (2)
  • 0.106 in (1)
  • 0.125 in (7)
  • 0.126 in (8)
  • 0.1563 in (2)
  • 0.1575 in (4)
  • 0.1969 in (3)
  • 0.236 in (3)
  • 0.2362 in (3)
  • 0.25 in (2)
  • 0.312 in (4)
  • 0.375 in (2)
  • 0.3935 in (1)
  • 0.3937 in (1)
  • 0.4922 in (1)
  • 0.5 in (2)
  • 0.6299 in (1)
  • 0.63 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.051 mm (1)
  • 0.057 mm (1)
  • 0.066 mm (2)
  • 0.076 mm (4)
  • 0.08 mm (2)
  • 0.094 mm (2)
  • 0.097 mm (1)
  • 0.1 mm (6)
  • 0.102 mm (8)
  • 0.116 mm (1)
  • 0.117 mm (1)
  • 0.127 mm (2)
  • 0.131 mm (2)
  • 0.132 mm (2)
  • 0.133 mm (2)
  • 0.15 mm (2)
  • 0.152 mm (2)
  • 0.157 mm (2)
  • 0.16 mm (2)
  • 0.165 mm (4)
  • 0.173 mm (2)
  • 0.178 mm (2)
  • 0.19 mm (4)
  • 0.191 mm (4)
  • 0.198 mm (2)
  • 0.2 mm (6)
  • 0.202 mm (2)
  • 0.203 mm (4)
  • 0.224 mm (2)
  • 0.235 mm (2)
  • 0.244 mm (1)
  • 0.25 mm (2)
  • 0.251 mm (2)
  • 0.254 mm (4)
  • 0.269 mm (2)
  • 0.282 mm (2)
  • 0.284 mm (2)
  • 0.3 mm (2)
  • 0.315 mm (3)
  • 0.318 mm (6)
  • 0.33 mm (2)
  • 0.34 mm (6)
  • 0.343 mm (2)
  • 0.356 mm (2)
  • 0.397 mm (8)
  • 0.4 mm (12)
  • 0.404 mm (2)
  • 0.406 mm (4)
  • 0.43 mm (2)
  • 0.445 mm (4)
  • 0.472 mm (1)
  • 0.49 mm (2)
  • 0.508 mm (2)
  • 0.565 mm (1)
  • 0.57 mm (1)
  • 0.572 mm (6)
  • 0.575 mm (3)
  • 0.787 mm (2)
  • 0.792 mm (6)
  • 0.794 mm (10)
  • 0.8 mm (26)
  • 0.826 mm (4)
  • 0.902 mm (4)
  • 1.0 mm (2)
  • 1.188 mm (4)
  • 1.19 mm (2)
  • 1.191 mm (18)
  • 1.194 mm (2)
  • 1.195 mm (1)
  • 1.2 mm (26)
  • 1.25 mm (2)
  • 1.5 mm (2)
  • 1.585 mm (2)
  • 1.587 mm (2)
  • 1.588 mm (24)
  • 1.59 mm (1)
  • 1.6 mm (31)
  • 1.75 mm (2)
  • 1.98 mm (1)
  • 1.981 mm (2)
  • 2.0 mm (4)
  • 2.25 mm (4)
  • 2.38 mm (4)
  • 2.381 mm (7)
  • 2.388 mm (4)
  • 2.39 mm (1)
  • 2.4 mm (25)
  • 2.5 mm (2)
  • 3.175 mm (2)
  • 3.18 mm (1)
  • 3.2 mm (13)
  • 4.0 mm (4)
  • 5.0 mm (3)
  • 6.0 mm (3)
  • 6.35 mm (2)
  • 9.525 mm (2)
  • 10.0 mm (1)
  • 12.5 mm (1)
  • 12.7 mm (2)
  • 16.0 mm (1)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CPX (23)
  • K090 (30)
  • K10M (24)
  • K10P (22)
  • K20K (26)
  • K25P (22)
  • K313 (33)
  • K420 (35)
  • K68 (41)
  • KC250 (22)
  • KC5010 (44)
  • KC5025 (34)
  • KC5410 (30)
  • KC5510 (26)
  • KC730 (29)
  • KC7310 (24)
  • KC8050 (40)
  • KC810 (37)
  • KC850 (48)
  • KC9010 (25)
  • KC9025 (37)
  • KC910 (32)
  • KC9110 (45)
  • KC9120 (39)
  • KC9125 (41)
  • KC9140 (39)
  • KC9145 (37)
  • KC9215 (24)
  • KC9225 (26)
  • KC9240 (35)
  • KC9240NEW (31)
  • KC9245 (26)
  • KC9315 (33)
  • KC9320 (30)
  • KC9325 (32)
  • KC935 (38)
  • KC950 (37)
  • KC990 (33)
  • KCK05 (26)
  • KCK05B (24)
  • KCK15 (28)
  • KCK15B (29)
  • KCK20 (33)
  • KCK20B (37)
  • KCM15 (26)
  • KCM15B (22)
  • KCM25 (30)
  • KCM25B (29)
  • KCM35 (26)
  • KCM35B (22)
  • KCP10 (41)
  • KCP10B (36)
  • KCP25 (41)
  • KCP25B (43)
  • KCP30 (40)
  • KCP30B (31)
  • KCP40 (35)
  • KCP40B (35)
  • KCPK05 (25)
  • KCS10B (26)
  • KCU10 (44)
  • KCU25 (34)
  • KU30T (32)
  • KY1615 (25)
  • KY3000 (30)
  • KY3500 (24)
  • KY4400 (22)
  • KYHK15B (22)
  • KYK35 (24)
  • NL250 (26)
  • NL300 (32)
  • SP0819 (22)
  • SP3019 (22)
  • TN10P (27)
  • TN15M (24)
  • TN20K (28)
  • TN20P (30)
  • TN30M (24)
  • TN30P (28)
  • TN5015 (22)
  • TN5020 (22)
  • TN5120 (22)
  • TN7015 (31)
  • TN7025 (31)
  • TN7035 (24)
  • TN7115 (29)
  • TN7125 (31)
  • TN7135 (24)
  • TN8025 (29)
  • WK05CT (26)
  • WK20CT (30)
  • WM15CT (26)
  • WM25CT (29)
  • WM35CT (26)
  • WP15CT (37)
  • WP25CT (37)
  • WP35CT (37)
  • WS10PT (24)
  • WS25PT (26)
  • WU10HT (23)
Hand Of Tool
Hand Of Tool
  • L (7)
  • N (5)
  • R (7)
Wiper Insert
Wiper Insert
  • N (50)
  • Y (18)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 120.0 mm (33)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 4.724 in (33)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (3)
  • S (16)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (14)
  • NEGATIVE-ZERO (2)
Maximum Bore Depth
Maximum Bore Depth
  • 3.937 in (33)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 100.0 mm (33)
Maximum Bore Depth Min to Maximum Bore Depth Max
frontEnd
Adapter Front-End
Adapter Front-End
  • BOEING TAPER FLANGE (1)
  • CARTRIDGE MOUNT (4)
  • END MILL ADAPTER (22)
  • ER COLLET CHUCK (7)
  • FM ADAPTER (1)
  • HTS MODULAR ADAPTER (2)
  • HYDRAULIC CHUCK (27)
  • HYDRAULIC CHUCK-HIGH TORQUE (5)
  • HYDRAULIC CHUCK-SLIM LINE (8)
  • KM MODULAR ADAPTER (15)
  • SHELL MILL ADAPTER (76)
  • SHRINK FIT ADAPTER (38)
  • SQUARE SHANK ADAPTER (9)
  • TUNABLE SHELL MILL ADAPTER (6)
  • WHISTLE NOTCH ADAPTER (15)
Clamp Style
Clamp Style
  • D (8)
  • M (29)
  • N (8)
  • P (4)
  • X (3)
Cutting Width
Cutting Width
  • 0.0394 in (2)
  • 0.047 in (2)
  • 0.0472 in (2)
  • 0.0591 in (2)
  • 0.062 in (2)
  • 0.0689 in (2)
  • 0.072 in (2)
  • 0.078 in (2)
  • 0.0787 in (2)
  • 0.079 in (1)
  • 0.0866 in (2)
  • 0.088 in (2)
  • 0.0886 in (1)
  • 0.094 in (2)
  • 0.097 in (2)
  • 0.0984 in (2)
  • 0.105 in (2)
  • 0.108 in (2)
  • 0.1083 in (2)
  • 0.11 in (2)
  • 0.118 in (2)
  • 0.1181 in (4)
  • 0.122 in (2)
  • 0.125 in (4)
  • 0.126 in (4)
  • 0.128 in (2)
  • 0.131 in (1)
  • 0.1378 in (4)
  • 0.142 in (2)
  • 0.156 in (2)
  • 0.157 in (2)
  • 0.1574 in (4)
  • 0.1575 in (4)
  • 0.167 in (4)
  • 0.1673 in (2)
  • 0.169 in (2)
  • 0.1771 in (4)
  • 0.1772 in (4)
  • 0.178 in (2)
  • 0.185 in (3)
  • 0.188 in (4)
  • 0.189 in (4)
  • 0.192 in (1)
  • 0.193 in (1)
  • 0.195 in (2)
  • 0.1969 in (2)
  • 0.197 in (4)
  • 0.202 in (2)
  • 0.213 in (2)
  • 0.2165 in (2)
  • 0.2166 in (1)
  • 0.218 in (2)
  • 0.219 in (2)
  • 0.2362 in (4)
  • 0.25 in (6)
  • 0.255 in (2)
  • 0.276 in (2)
  • 0.281 in (4)
  • 0.312 in (4)
  • 0.315 in (1)
  • 0.344 in (2)
  • 0.354 in (2)
  • 0.375 in (4)
  • 0.38 in (2)
  • 0.383 in (2)
  • 1.93 in (1)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (2)
  • 1.19 mm (1)
  • 1.194 mm (2)
  • 1.2 mm (2)
  • 1.5 mm (2)
  • 1.57 mm (2)
  • 1.575 mm (2)
  • 1.75 mm (2)
  • 1.829 mm (2)
  • 1.981 mm (2)
  • 2.0 mm (2)
  • 2.2 mm (2)
  • 2.235 mm (2)
  • 2.24 mm (1)
  • 2.25 mm (1)
  • 2.388 mm (2)
  • 2.39 mm (1)
  • 2.464 mm (2)
  • 2.5 mm (2)
  • 2.667 mm (2)
  • 2.743 mm (2)
  • 2.75 mm (2)
  • 2.794 mm (2)
  • 2.997 mm (2)
  • 3.0 mm (4)
  • 3.099 mm (2)
  • 3.17 mm (2)
  • 3.175 mm (4)
  • 3.18 mm (1)
  • 3.2 mm (4)
  • 3.25 mm (2)
  • 3.251 mm (2)
  • 3.32 mm (1)
  • 3.329 mm (1)
  • 3.5 mm (4)
  • 3.607 mm (2)
  • 3.96 mm (2)
  • 3.962 mm (2)
  • 3.974 mm (1)
  • 3.988 mm (2)
  • 4.0 mm (4)
  • 4.242 mm (4)
  • 4.25 mm (2)
  • 4.3 mm (2)
  • 4.5 mm (4)
  • 4.521 mm (2)
  • 4.6 mm (1)
  • 4.699 mm (3)
  • 4.775 mm (4)
  • 4.78 mm (1)
  • 4.785 mm (1)
  • 4.788 mm (1)
  • 4.8 mm (2)
  • 4.801 mm (4)
  • 4.81 mm (2)
  • 4.88 mm (1)
  • 4.9 mm (1)
  • 4.95 mm (2)
  • 5.0 mm (2)
  • 5.004 mm (4)
  • 5.131 mm (2)
  • 5.41 mm (2)
  • 5.5 mm (2)
  • 5.537 mm (2)
  • 5.563 mm (2)
  • 6.0 mm (4)
  • 6.35 mm (6)
  • 6.36 mm (1)
  • 6.48 mm (2)
  • 7.01 mm (2)
  • 7.137 mm (4)
  • 7.925 mm (4)
  • 8.001 mm (1)
  • 8.738 mm (2)
  • 8.992 mm (2)
  • 9.525 mm (4)
  • 9.65 mm (2)
  • 9.73 mm (2)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • BTF - BTF (1)
  • FDA - Milling Cutter Arbor (75)
  • FLK - Flange Adapter Kenna (1)
  • HTS - Deep Hole Index Drill (2)
  • KMT - KM Adapter (15)
  • MCS - Modular Cartridge System (4)
  • SPK-Holding Arbor-Spindle Head (7)
  • SZK - Collet Taper (7)
  • VKT - Square Shank (9)
  • ZYL - Cylindrical Adapter (115)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (18)
  • D-DIAMOND/RHOMBIC 55 (4)
  • R-ROUND (9)
  • S-SQUARE 90 (7)
  • T-TRIANGLE 60 (4)
  • TN-TOP NOTCH (8)
  • V-DIAMOND/RHOMBIC 35 (2)
Front End Style
Front End Style
  • BTF01 Standard BTF (1)
  • FDA12 Transv Drive&CutRetScr (3)
  • FDA22 Transv Drive & SHCS (69)
  • FDA42TranDrvw/CtrScrwORBoltCir (3)
  • FLK32FlngMt 3&6Bolt 67&97DBC (1)
  • HTS01 Standard HTS Shank (2)
  • KMT00 All KM, except 02,05,09 (13)
  • KMT09 KM4X 4 ball connection (2)
  • MCS01 Modular Deep Grooving (4)
  • SPK02 Bolt Circ Dia 101.6 mm (7)
  • SZK02 Collets 8 Degree Taper (7)
  • VKT01 Std Design (9)
  • ZYL01 Straight Shank (78)
  • ZYL10 Weldon Shank (22)
  • ZYL13 2Deg-Whistle Notch (10)
  • ZYL64 5° WN w/cyl end (5)
Insert Size
Insert Size
  • 3 (2)
  • 4 (2)
  • 5 (2)
  • 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.581 in (1)
  • 1.975 in (1)
  • 2.368 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 40.15 mm (1)
  • 50.15 mm (1)
  • 60.15 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 1.0690 in (1)
  • 1.9690 in (4)
  • 2.0000 in (2)
  • 2.0710 in (3)
  • 2.1650 in (4)
  • 2.2500 in (2)
  • 2.3620 in (5)
  • 2.6470 in (1)
  • 2.7560 in (2)
  • 2.9530 in (2)
  • 3.0000 in (2)
  • 3.0020 in (2)
  • 3.1496 in (5)
  • 3.1500 in (1)
  • 3.2500 in (1)
  • 3.3370 in (1)
  • 3.3460 in (4)
  • 3.3465 in (4)
  • 3.3800 in (1)
  • 3.4250 in (2)
  • 3.4840 in (2)
  • 3.5000 in (1)
  • 3.5430 in (6)
  • 3.7400 in (6)
  • 3.7500 in (4)
  • 3.8940 in (1)
  • 3.9370 in (28)
  • 4.0000 in (9)
  • 4.1340 in (4)
  • 4.1690 in (1)
  • 4.2500 in (3)
  • 4.2580 in (1)
  • 4.2900 in (1)
  • 4.3310 in (1)
  • 4.3370 in (1)
  • 4.5000 in (1)
  • 4.5275 in (2)
  • 4.5280 in (1)
  • 4.5400 in (2)
  • 4.6040 in (1)
  • 4.7240 in (6)
  • 4.7244 in (1)
  • 4.7500 in (1)
  • 4.9680 in (1)
  • 5.0000 in (1)
  • 5.0370 in (1)
  • 5.1181 in (1)
  • 5.2580 in (1)
  • 5.2900 in (2)
  • 5.3150 in (3)
  • 5.3370 in (1)
  • 5.5000 in (1)
  • 5.6040 in (1)
  • 5.7500 in (1)
  • 5.9055 in (7)
  • 5.9060 in (8)
  • 5.9680 in (1)
  • 6.0000 in (8)
  • 6.0370 in (1)
  • 6.2580 in (1)
  • 6.2990 in (25)
  • 6.2992 in (1)
  • 6.3370 in (1)
  • 6.6040 in (1)
  • 6.9680 in (1)
  • 7.0370 in (1)
  • 7.2580 in (1)
  • 7.3370 in (1)
  • 7.6040 in (1)
  • 7.8740 in (16)
  • 7.9680 in (1)
  • 8.0370 in (1)
  • 8.2580 in (1)
  • 8.6040 in (1)
  • 8.9680 in (1)
  • 9.0370 in (1)
  • 10.2360 in (1)
  • 10.4680 in (1)
  • 10.5000 in (1)
  • 11.4680 in (1)
  • 12.5000 in (1)
  • 12.5980 in (1)
  • 12.9920 in (1)
  • 13.0000 in (1)
Gage Length
Gage Length