(833) 893-0249

Country

Langue

Unité de mesure

Liste des prix:

Réduction: %

Liste des prix:

$1,362.60 /each

Your price::

Qty

Shoulder milling cutter for high-speed aluminum machining.

SDS

5720 Series • End Mill • Monobloc HSK63A • Metric

Name: 5720 Series • End Mill • Monobloc HSK63A • Metric
SKU: 6160117
Rating: 0 (0 reviews)

Shoulder milling cutter for high-speed aluminum machining.

Metric

Inch

Numéro de matériaux SAP	6160117
Réf. catalogue ISO	5720VZ16HA050Z4R75
Réf. catalogue ANSI	5720VZ16HA050Z4R75
[D1] Diamètre effectif de coupe	50 mm
[D1] Diamètre effectif de coupe	1.968 in
[D] Adaptateur / Queue / Diamètre d’alésage	63 mm
[D] Adaptateur / Queue / Diamètre d’alésage	2.48 in
[L] Longueur totale	132.9 mm
[L] Longueur totale	5.232 in
[L1] Longueur de référence	101 mm
[L1] Longueur de référence	3.976 in
[L2] Longueur de tête	75 mm
[L2] Longueur de tête	2.952 in
[AP1MAX] 1re profondeur de coupe maximale	16 mm
[AP1MAX] 1re profondeur de coupe maximale	.63 in
Nombre de plaquettes	4
Angle de ramping maximum	7.9
Poids en kilogrammes	1.41
T/Min max	30000

Voir toutes les variantes de produits

Uses and application

Spiral Circular
Surfaçage
Fraisage hélicoïdal
Ramping : Ébauche
Fraisage de côté/avec épaulement : Bout plat
Fraisage — Arrosage interne
Usinage de poches
Lamage
Inclined Square End Mill

Matériaux de pièce à usiner

K Fonte

N Non ferreux

Features and benefits

For pocketing and profiling in aluminum and aluminum alloys.

Maximum stability in high-speed applications.

Excellent choice for components with thin walls due to low cutting pressure.

Internal coolant supply.

Reinforced pockets for high feed applications and ramping, increasing tool and productivity.

Côté de la machine

Côté pièce à usiner

Guide de sélection des plaquettes

5720 Series • Insert Selection Guide
Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	–	–	–	–	–	–
P3–P4	–	–	–	–	–	–
P5–P6	–	–	–	–	–	–
M1–M2	–	–	–	–	–	–
M3	–	–	–	–	–	–
K1–K2	–	–	–	–	–	–
K3	–	–	–	–	–	–
N1–N2	.F..721	GH1	.F..721	GH1	.F..721	GH1
N3	.F..721	GH1	.F..721	GH1	.F..721	GH1
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

Avances de départ recommandées [mm]

5720 Series • Recommended Starting Feeds [mm/th]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
...FR721	0,12	0.45	0.81	0,08	0.33	0.58	0,06	0.25	0.43	0,06	0.21	0.38	0,05	0.2	0.35
...ER721	0.15	0.50	0.92	0.11	0.36	0.66	0.08	0.27	0.5	0.07	0,24	0.43	0.07	0,22	0,40
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

5720 Series • Recommended Starting Feeds [IPT]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
...FR721	0,12	0.45	0.81	0,08	0.33	0.58	0,06	0.25	0.43	0,06	0.21	0.38	0,05	0.2	0.35
...ER721	0.15	0.50	0.92	0.11	0.36	0.66	0.08	0.27	0.5	0.07	0,24	0.43	0.07	0,22	0,40
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

Vitesses de départ recommandées [m/mn]

5720 Series • Recommended Starting Speed [m/min]
Grade		GH1
Chip Thickness hex mm		Min		Max
Material Group		Max	Start	Min
P	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
	5	–	–	–
	6	–	–	–
M	1	–	–	–
	2	–	–	–
	3	–	–	–
K	1	215	140	120
	2	195	120	100
	3	180	105	80
N	1	795	695	600
	2	615	520	425
	3	615	520	425
S	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
H	1	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

5720 Series • Recommended Starting Speed [SFM]
Grade		GH1
Chip Thickness hex Inch		Min		Max
Material Group		Max	Start	Min
P	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
	5	–	–	–
	6	–	–	–
M	1	–	–	–
	2	–	–	–
	3	–	–	–
K	1	705	460	395
	2	640	395	330
	3	590	345	260
N	1	2610	2280	1970
	2	2020	1705	1395
	3	2020	1705	1395
S	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
H	1	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	catalogue ISO	Grade

Bienvenue

Veuillez confirmer vos préférences

Mettre à jour les préférences

Suggestions de produit

Product Family suggestions

Call (833) 893-0249

Contacter l'équipe commerciale

Call (833) 893-0249

Contacter l'équipe commerciale

Édition de la Solution

Ajout de Solution

5720 Series • End Mill • Monobloc HSK63A • Metric