successfully added to cart
View Cart


Mark all as read
Mobile Menu

Tech Tip #76 - Coolant Considerations in Machining

Coolant can dramatically affect the performance of cutting tools, which can impact the cost of your operation. Consider these guidelines for using coolant:

Cutting fluids perform two basic functions in drilling, milling, and threading:
1) To reduce heat generated in cut
2) To lubricate the tool

Water-based coolant helps to cool the chip when it is sheared from the workpiece material.
Coolant acts as a lubricant to reduce friction between the chip and the tool. This improves the surface finish and helps force chips out of the flutes. Coolant can improve tool life because excessive heat and friction can dull the tool.

Sometimes users will reduce the coolant/water ratio significantly because they assume this will help cut costs. However, tool life can decrease rapidly if the proper amount of coolant is not used when operating the tool.

If the recommended soluble oil concentration of 8%-10% is reduced to 5%, tool life will be sacrificed. A drill that typically makes thousands of holes may now get only hundreds of holes at the reduced coolant level. Once coolant levels are returned to the recommended amount, drill tool life should return.

For high-speed machining with carbide tools, it is very important to provide adequate water-based fluids to cool the tool. However, if you are high-speed steel tapping, heavier oil-based coolant is recommended.

Always follow the tool manufacturer’s mixing recommendations for coolant.

Please adjust the following properties from

catalogue ISO

catalogue ANSI

to find similar products.
You are about to create a duplicate . Do you want to proceed?
You are about to delete Do you want to proceed?
What would you like to rename your to?
Please enter a valid name
Please enter a name for the duplicate
Please enter a valid name
You are about to add to your My Solutions page. Do you want to proceed?
Please enter a valid name
Send a copy of

Please enter a valid Email
Please enter a valid name

The following CAD files are available

Please select a file to download

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service.
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Name SAP Material Number ISO Catalog Number    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.