Notifications

Mark all as read

Holemaking

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (60)
  • Blind Hole Finishing Blind Hole Finishing (64)
  • Convex Drilling Convex Drilling (1)
  • Counterboring Counterboring (1)
  • Countersinking Countersinking (1)
  • Cross Hole Drilling Cross Hole Drilling (6)
  • Drilling Drilling (34)
  • Inclined Exit Drilling Inclined Exit Drilling (5)
  • Multiple Direction Cutting Multiple Direction Cutting (15)
  • Pipe Thread Pipe Thread (1)
  • Stacked Plates Drilling Stacked Plates Drilling (6)
  • Tapping Blind Hole Tapping Blind Hole (8)
  • Tapping Through Hole Tapping Through Hole (3)
  • Threading Threading (12)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (60)
  • Through Hole Finishing Through Hole Finishing (65)
Workpiece Material
  • P Steel (113)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (113)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (113)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (113)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (113)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (106)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (106)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (106)
  • M Stainless Steel (109)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (109)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (102)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (109)
  • K Cast Iron (115)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (108)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (115)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (108)
  • N Non-Ferrous Materials (106)
    • N1
      Wrought Aluminum
      (106)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (106)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (89)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (106)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (102)
    • N6
      Carbon, Graphite Composites, CFRP
      (102)
    • N7
      MMC's
      (102)
  • S High-Temp Alloys (103)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (102)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (102)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (102)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (103)
  • H Hardened Materials (102)
    • H1
      Hardened Materials 44-48 HRC
      (102)
    • H2
      Hardened Materials 48-55 HRC
      (102)
    • H3
      Hardened Materials 56-60 HRC
      (102)
    • H4
      Hardened Materials >60 HRC
      (96)
Cutting Diameter
  • 2.947 (1)
  • 3.455 (1)
  • 3.734 (1)
  • 3.97 (1)
  • 4.0 (1)
  • 4.09 (1)
  • 4.7 (1)
  • 4.76 (1)
  • 4.9 (1)
  • 5.6 (1)
  • 5.8 (1)
  • 6.35 (2)
  • 6.5 (2)
  • 7.54 (1)
  • 7.541 (1)
  • 8.0 (1)
  • 8.7 (1)
  • 9.703 (1)
  • 10.0 (1)
  • 10.1 (1)
  • 10.7 (1)
  • 10.716 (1)
  • 11.0 (1)
  • 11.5 (1)
  • 12.0 (1)
  • 12.304 (1)
  • 12.4 (1)
  • 12.5 (1)
  • 12.7 (1)
  • 13.3 (1)
  • 13.5 (1)
  • 14.0 (1)
  • 14.2 (1)
  • 14.666 (1)
  • 14.684 (1)
  • 14.7 (1)
  • 14.854 (1)
  • 15.0 (1)
  • 15.083 (1)
  • 17.7 (1)
  • 19.05 (1)
  • 19.5 (1)
  • 20.0 (1)
  • 25.07 (1)
  • 26.59 (1)
to
Cutting Diameter
  • 0.116 (1)
  • 0.136 (1)
  • 0.147 (1)
  • 0.1563 (1)
  • 0.1575 (1)
  • 0.161 (1)
  • 0.185 (1)
  • 0.1874 (1)
  • 0.1929 (1)
  • 0.2205 (1)
  • 0.2283 (1)
  • 0.25 (2)
  • 0.2559 (2)
  • 0.2969 (2)
  • 0.315 (1)
  • 0.3425 (1)
  • 0.382 (1)
  • 0.3937 (1)
  • 0.3976 (1)
  • 0.4213 (1)
  • 0.4219 (1)
  • 0.4331 (1)
  • 0.4528 (1)
  • 0.4724 (1)
  • 0.4844 (1)
  • 0.4882 (1)
  • 0.4921 (1)
  • 0.5 (1)
  • 0.5236 (1)
  • 0.5315 (1)
  • 0.551 (1)
  • 0.5591 (1)
  • 0.5774 (1)
  • 0.5781 (1)
  • 0.5787 (1)
  • 0.5848 (1)
  • 0.5906 (1)
  • 0.5938 (1)
  • 0.6969 (1)
  • 0.75 (1)
  • 0.7677 (1)
  • 0.7874 (1)
  • 0.987 (1)
  • 1.047 (1)
to
Cutting Length
  • 0.49 (1)
  • 0.51 (2)
  • 0.61 (1)
  • 0.62 (1)
  • 0.83 (1)
  • 0.88 (2)
  • 1.0 (1)
  • 1.12 (1)
  • 1.22 (1)
  • 1.375 (1)
to
Cutting Length
  • 12.5 (1)
  • 12.9 (1)
  • 13.0 (1)
  • 15.4 (1)
  • 15.8 (1)
  • 21.0 (1)
  • 22.4 (2)
  • 25.4 (1)
  • 28.6 (1)
  • 31.0 (1)
  • 34.925 (1)
to
Cutting Condition
  • Heavily Interrupted Cut (64)
  • Interrupted (9)
  • Lightly Interrupted Cut (64)
  • Smooth Cut (64)
  • Varying Depth of Cut (64)
Maximum Hole Depth [L4]
  • 0.5512 (1)
  • 0.669 (1)
  • 0.6772 (1)
  • 0.945 (2)
  • 1.0197 (1)
  • 1.1417 (1)
  • 1.142 (2)
  • 1.2992 (1)
  • 1.378 (4)
  • 1.5748 (1)
  • 1.575 (3)
  • 1.5866 (1)
  • 1.6142 (1)
  • 1.6929 (1)
  • 1.693 (1)
  • 1.7717 (1)
  • 1.929 (1)
  • 2.0906 (1)
  • 2.1654 (1)
  • 2.205 (1)
  • 2.3622 (1)
  • 2.4803 (2)
  • 2.5394 (1)
  • 3.54 (1)
  • 3.5827 (1)
  • 6.1811 (1)
  • 6.2992 (1)
to
Maximum Hole Depth [L4]
  • 14.0 (1)
  • 17.0 (1)
  • 17.2 (1)
  • 24.0 (2)
  • 25.9 (1)
  • 29.0 (3)
  • 33.0 (1)
  • 35.0 (4)
  • 40.0 (4)
  • 40.3 (1)
  • 41.0 (1)
  • 43.0 (2)
  • 45.0 (1)
  • 49.0 (1)
  • 53.1 (1)
  • 55.0 (1)
  • 56.0 (1)
  • 60.0 (1)
  • 63.0 (2)
  • 64.5 (1)
  • 90.0 (1)
  • 91.0 (1)
  • 157.0 (1)
  • 160.0 (1)
to
Cutting Condition Material
  • H-All (64)
  • K-All (64)
  • K1 (3)
  • M-All (64)
  • N-All (64)
  • P-All (64)
  • S-All (64)
  • S2 (9)
  • S4 (3)
Thread Tolerance Class ISO
  • 6H-I (1)
Reach
  • 20.0 (1)
  • 24.0 (1)
  • 27.2 (1)
  • 34.0 (2)
  • 34.011 (1)
  • 36.0 (2)
  • 40.0 (1)
  • 41.0 (1)
  • 44.0 (3)
  • 47.0 (1)
  • 49.0 (1)
  • 50.0 (1)
  • 53.0 (1)
  • 55.0 (4)
  • 60.0 (1)
  • 61.0 (1)
  • 65.0 (1)
  • 66.0 (1)
  • 71.0 (1)
  • 77.0 (1)
  • 79.0 (1)
  • 82.0 (1)
  • 83.0 (2)
  • 97.0 (1)
  • 108.0 (1)
  • 174.0 (1)
  • 181.0 (1)
to
Reach
  • 0.7874 (1)
  • 0.945 (1)
  • 1.0709 (1)
  • 1.339 (3)
  • 1.417 (1)
  • 1.4173 (1)
  • 1.5748 (1)
  • 1.614 (1)
  • 1.732 (3)
  • 1.85 (1)
  • 1.9291 (1)
  • 1.9685 (1)
  • 2.0866 (1)
  • 2.165 (3)
  • 2.1654 (1)
  • 2.362 (1)
  • 2.402 (1)
  • 2.5591 (1)
  • 2.5984 (1)
  • 2.795 (1)
  • 3.0315 (1)
  • 3.1102 (1)
  • 3.2283 (1)
  • 3.2677 (2)
  • 3.82 (1)
  • 4.252 (1)
  • 6.8504 (1)
  • 7.126 (1)
to
Tap PD Class
  • D7 (2)
  • H2 (2)
  • H3 (3)
  • H5 (3)
Tap Tolerance Class
  • ISO 2 (1)
Tool Cutting Edge Angle
  • 70.0 (11)
  • 90.0 (48)
  • 95.0 (5)
to
Connection Style
  • BF Drill Shank (1)
  • Boring Bar Shank (1)
  • Cylindrical with Drive Square (12)
  • MODBORE Boring Bar (11)
  • MODBORE Screw-On Head (4)
  • MQL Drill Shank (2)
  • Short Taper Reamer Shank (1)
  • Straight-Cylindrical (31)
  • Whistle Notch 2 (1)
Number of Flutes
  • 2 (36)
  • 3 (9)
  • 4 (1)
  • 5 (1)
  • 6 (1)
Cutting Edges Per Insert
  • 0.0 (11)
  • 1.0 (15)
  • 2.0 (15)
  • 3.0 (1)
  • 4.0 (16)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.038 (79)
  • 0.1 (96)
  • 0.102 (6)
  • 0.2 (96)
  • 0.203 (85)
  • 0.397 (85)
  • 0.4 (104)
  • 0.791 (10)
  • 0.792 (6)
  • 0.794 (49)
  • 0.8 (102)
  • 1.188 (8)
  • 1.19 (6)
  • 1.191 (14)
  • 1.2 (55)
  • 1.587 (6)
  • 1.588 (14)
  • 1.6 (46)
  • 2.38 (8)
  • 2.4 (8)
  • 3.2 (8)
to
Corner Radius
  • 0.0015 (79)
  • 0.004 (96)
  • 0.008 (96)
  • 0.0083 (6)
  • 0.0156 (104)
  • 0.016 (17)
  • 0.031 (6)
  • 0.0311 (10)
  • 0.0312 (49)
  • 0.0313 (102)
  • 0.0315 (46)
  • 0.0468 (8)
  • 0.0469 (55)
  • 0.047 (23)
  • 0.0625 (46)
  • 0.063 (14)
  • 0.0938 (8)
  • 0.094 (8)
  • 0.126 (8)
  • 0.1563 (6)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Coating
  • Diamond (1)
  • TiAlN (18)
  • TiN (9)
  • TiSiN (1)
  • Uncoated (10)
Grade Of Cutting Tool
  • 13E (14)
  • 241 (6)
  • CL4 (6)
  • CM2 (14)
  • CM3 (6)
  • CM4 (14)
  • CPX (14)
  • CW2 (6)
  • GX (6)
  • HCT600 (15)
  • HT2 (96)
  • HTX (96)
  • K060 (6)
  • K090 (14)
  • K1 (6)
  • K10 (1)
  • K10M (79)
  • K10P (79)
  • K10U (85)
  • K15U (85)
  • K20K (79)
  • K21 (6)
  • K25M (70)
  • K25P (6)
  • K313 (102)
  • K35P (8)
  • K420 (14)
  • K45 (6)
  • K68 (102)
  • K715 (1)
  • KB1340 (6)
  • KB1345 (49)
  • KB1610 (85)
  • KB1625 (6)
  • KB1630 (96)
  • KB5610 (85)
  • KB5625 (85)
  • KB5630 (85)
  • KB9610 (85)
  • KB9640 (6)
  • KBH10 (85)
  • KBH10B (6)
  • KBH20 (96)
  • KBH20B (6)
  • KBK35 (6)
  • KC210 (6)
  • KC250 (14)
  • KC5010 (102)
  • KC5025 (102)
  • KC5410 (102)
  • KC5510 (14)
  • KC5525 (6)
  • KC710 (6)
  • KC720 (102)
  • KC7210 (1)
  • KC7215 (1)
  • KC722 (6)
  • KC730 (102)
  • KC7310 (14)
  • KC7315 (1)
  • KC732 (102)
  • KC7320 (1)
  • KC7410 (10)
  • KC7425 (1)
  • KC7815 (2)
  • KC8050 (102)
  • KC810 (102)
  • KC850 (102)
  • KC9010 (93)
  • KC9025 (102)
  • KC910 (102)
  • KC9105 (102)
  • KC9110 (102)
  • KC9120 (93)
  • KC9125 (102)
  • KC9140 (14)
  • KC9145 (14)
  • KC9215 (14)
  • KC9225 (102)
  • KC9240 (102)
  • KC9240NEW (102)
  • KC9245 (14)
  • KC9315 (102)
  • KC9320 (102)
  • KC9325 (102)
  • KC935 (102)
  • KC950 (93)
  • KC990 (93)
  • KCD25 (93)
  • KCK05 (102)
  • KCK05B (93)
  • KCK15 (102)
  • KCK15B (102)
  • KCK20 (102)
  • KCK20B (102)
  • KCM15 (110)
  • KCM15B (102)
  • KCM25 (102)
  • KCM25B (102)
  • KCM35 (102)
  • KCM35B (46)
  • KCP05 (102)
  • KCP05B (38)
  • KCP10 (102)
  • KCP10B (102)
  • KCP25 (102)
  • KCP25B (102)
  • KCP30 (102)
  • KCP30B (55)
  • KCP40 (14)
  • KCP40B (14)
  • KCPK05 (14)
  • KCPK15 (1)
  • KCS10 (96)
  • KCS10B (102)
  • KCU10 (102)
  • KCU25 (102)
  • KD050 (85)
  • KD081 (85)
  • KD100 (6)
  • KD120 (6)
  • KD1400 (85)
  • KD1405 (6)
  • KD1425 (85)
  • KDF400 (1)
  • KM1 (6)
  • KMF (6)
  • KN15 (3)
  • KN25 (1)
  • KSP39 (8)
  • KSU50 (3)
  • KT125 (6)
  • KT150 (6)
  • KT175 (85)
  • KT315 (96)
  • KT325 (97)
  • KTP10 (79)
  • KU10 (79)
  • KU10T (96)
  • KU30T (102)
  • KY1310 (14)
  • KY1320 (14)
  • KY1540 (6)
  • KY1615 (14)
  • KY2000 (14)
  • KY2100 (6)
  • KY3000 (14)
  • KY3400 (14)
  • KY3500 (14)
  • KY4000 (14)
  • KY4300 (14)
  • KY4400 (14)
  • KYHK15B (14)
  • KYK10 (6)
  • KYK25 (14)
  • KYK35 (14)
  • KYS25 (6)
  • KYS30 (6)
  • NL200 (6)
  • NL250 (14)
  • NL300 (23)
  • NL400 (14)
  • NL920 (17)
  • P25 (6)
  • PS5 (6)
  • SP0819 (14)
  • SP3019 (14)
  • SP4019 (23)
  • X00511 (6)
Hand Of Tool
  • R (64)
Drill Type
  • 81-01 (35)
Tap Type
  • 10 (1)
  • 11 (3)
  • 8 (8)
Tap Standard
  • ANSI (7)
  • DIN 374 (1)
Lead In Length
  • 0.043 (1)
to
Lead in Length
  • 1.1 (1)
to
Minimum Axial Groove Diameter
  • 0.2283 (1)
  • 0.3839 (1)
  • 0.4232 (1)
  • 0.502 (1)
  • 0.5413 (1)
  • 0.6594 (1)
  • 0.6988 (1)
  • 0.8563 (2)
  • 0.9252 (5)
  • 0.9409 (2)
  • 0.9744 (1)
  • 1.0925 (1)
  • 1.1614 (4)
  • 1.1713 (1)
  • 1.2165 (2)
  • 1.25 (1)
  • 1.3681 (1)
  • 1.5256 (1)
  • 1.5551 (4)
  • 1.5709 (2)
  • 1.6831 (1)
  • 1.8799 (1)
  • 1.9488 (3)
  • 2.0039 (2)
  • 2.5787 (7)
  • 2.6339 (3)
  • 3.3425 (2)
  • 3.4055 (7)
  • 4.5079 (4)
  • 4.9173 (1)
to
Minimum Axial Groove Diameter
  • 5.8 (1)
  • 9.75 (1)
  • 10.75 (1)
  • 12.75 (1)
  • 13.75 (1)
  • 16.75 (1)
  • 17.75 (1)
  • 21.75 (2)
  • 23.5 (5)
  • 23.9 (2)
  • 24.75 (1)
  • 27.75 (1)
  • 29.5 (4)
  • 29.75 (1)
  • 30.9 (2)
  • 31.75 (1)
  • 34.75 (1)
  • 38.75 (1)
  • 39.5 (4)
  • 39.9 (2)
  • 42.75 (1)
  • 47.75 (1)
  • 49.5 (3)
  • 50.9 (2)
  • 65.5 (7)
  • 66.9 (3)
  • 84.9 (2)
  • 86.5 (7)
  • 114.5 (4)
  • 124.9 (1)
to
Maximum Axial Groove Diameter
  • 11.2 (1)
  • 14.75 (1)
  • 16.1 (1)
  • 18.1 (1)
  • 18.75 (1)
  • 22.1 (1)
  • 22.75 (1)
  • 26.75 (1)
  • 27.1 (1)
  • 29.75 (1)
  • 30.5 (5)
  • 31.1 (2)
  • 32.75 (1)
  • 36.75 (1)
  • 39.75 (1)
  • 40.0 (1)
  • 40.1 (5)
  • 44.1 (1)
  • 48.1 (2)
  • 50.5 (4)
  • 51.1 (2)
  • 53.1 (1)
  • 66.5 (3)
  • 67.1 (2)
  • 87.5 (7)
  • 115.5 (7)
  • 153.0 (4)
  • 153.1 (3)
  • 171.1 (2)
  • 191.1 (1)
to
Maximum Axial Groove Diameter
  • 0.4409 (1)
  • 0.5807 (1)
  • 0.6339 (1)
  • 0.7126 (1)
  • 0.7382 (1)
  • 0.8701 (1)
  • 0.8957 (1)
  • 1.0531 (1)
  • 1.0669 (1)
  • 1.1713 (1)
  • 1.2008 (5)
  • 1.224 (1)
  • 1.2244 (1)
  • 1.2894 (1)
  • 1.4469 (1)
  • 1.565 (1)
  • 1.5748 (1)
  • 1.5787 (5)
  • 1.7362 (1)
  • 1.8937 (2)
  • 1.9882 (4)
  • 2.0118 (2)
  • 2.0906 (1)
  • 2.6181 (3)
  • 2.6417 (2)
  • 3.4449 (7)
  • 4.5472 (7)
  • 6.0236 (4)
  • 6.0276 (3)
  • 6.7362 (2)
  • 7.5236 (1)
to
Cutting Direction
  • E (16)
Rake Angle Style
  • NEGATIVE-ZERO (16)
Maximum Bore Depth
  • 30.0 (1)
  • 40.0 (2)
  • 45.0 (1)
  • 48.0 (1)
  • 55.0 (1)
  • 60.0 (1)
  • 64.0 (2)
  • 65.0 (1)
  • 70.0 (3)
  • 85.0 (3)
to
Maximum Bore Depth
  • 1.1811 (1)
  • 1.5748 (2)
  • 1.7717 (1)
  • 1.8896 (1)
  • 2.1654 (1)
  • 2.3622 (1)
  • 2.5196 (2)
  • 2.559 (1)