Kennametal EDM Blocks

Our globally renowned portfolio of grades for metalforming and stamping is based on over 80 years of research and development of tungsten carbide-based materials. 

We have a large selection of conventional and low-corrosion rectangular blanks in stock. Each is sinter-HIP processed and stress-relieved for optimum performance in EDM machining. Blocks are available in standard sizes, which are individually packaged for easy delivery and handling. 

EDM Blocks Portfolio:

  • All grades are proven in their application.
  • Products stocked globally for quick delivery
  • Standard and corrosion-resistant grades
  • 200 standard sizes with custom sizes available upon request
  • Application, metallurgical, and process optimization services
Blanks in Boxes

         

Withstand Extensive EDM

Our latest grades were developed with a proprietary binder system and maintain the hardness and mechanical properties of our conventional grades. They resist the corrosion, pitting, and cracking commonly experienced during electrical discharge machining, especially in thick punches and large die segments. 

Cemented Tungsten Carbide Grades

We offer a wide variety of carbide grades, including submicron, fine, medium, and coarse-grained tungsten carbides with a mixture of binders and additives to create the right balance of hardness, toughness, abrasion, and corrosion resistance for the application.

Hardness: Hardness is determined by the percentage of binder and the grain size of the tungsten carbide particles. Generally, the more binder, the lower the hardness, and the larger the grains, the lower the hardness.

Wear Resistance: Generally, grades with more binder or coarser grains (lower hardness) will have less wear or abrasion resistance. However, there will be an increase in strength. It is always necessary to balance high hardness/high wear resistance with lower hardness/high strength. To test the abrasion or wear resistance of our carbide grades, we typically conduct a dry sand (G65) or slurry tests (B611).

Strength: The amount of binder and the variation in grain size will also affect the impact strength (a shock load) and the fracture toughness (a measure of crack initiation and crack propagation). More binder and/or coarser grains will generally increase the impact strength and the fracture toughness. With submicron grained grades, impact strength and the fracture toughness decrease when compared to coarser grained grades of equal cobalt content; however hardness increases. 

cemented carbide with medium-coarse grains

EDM Blocks Grade Descriptions

Unlike other carbide manufacturers, we produce our powders from the raw materials. This guarantees the highest quality tungsten carbide throughout the process and maximizes performance for the end user. 

Corrosion Resistant Binder Grades Optimized for the Wire EDM Process

KR855 Grade

KR855

Composition: 10% corrosion-resistant binder with submicron grain structure. Very good wear resistance with high edge sharpness but less shock resistance than higher binder grades. Excellent for EDM operations and good in non-ferrous applications. 

Application: An upgrade to standard 10% submicron grades, KR855 presents ideal wear resistance in high-speed stamping, medium, thin sheets — coining brass (~.010" / 0.25mm thick), can die ironing rings, non-gummy steels, compacting dies, stamping dies for razor blades, lead frames (thin copper ~.030"/0.76mm), annealed copper, and draw dies (300 series stainless steel). 

KR466 Grade

KR466

Composition: 12% corrosion-resistant binder with medium/fine-grain structure. Very high strength for medium impact with low wear properties. 

Application: Light blanking dies - Silicon Steel up to ~.020" / 0.5mm, Medium Blanking - Mild Steel to ~.030" / 0.8mm Lamination dies - silicon steel, Scroll dies, burnishing rolls, backward and forward extrusion dies (light impact). 

KR887 Grade

KR887

Composition: 15% corrosion-resistant mixed binder with submicron grain structure for lead frame and connector stamping. Very high strength and excellent wear resistance for medium-impact applications. 

Application: Stamping dies for razor blades, electronic stamping, lead frame dies, laminations, spring steel stampings, and coining dies (hard metal). Not recommended for stamping thick stainless steel. Use in place of CD650 for difficult to EDM parts, or if corrosive die lubricants are used. 

Cobalt Binder Grades Optimized for the Wire EDM Process

CD650 Grade

CD650

Composition: Conventional 15% cobalt binder with submicron grain structure for lead frame and connector stamping. Very high strength and excellent wear resistance for medium-impact applications. Our most popluar grade for general purpose stamping. 

Application: Stamping dies for razor blades, electronic stamping, lead frame dies, laminations, spring steel stampings, coining dies (hard metal). Not recommended for stamping thick stainless steel. 

CD750 Grade

CD750

Composition: 15.5% cobalt binder with ultrafine submicron grain structure for lead frame and connector stamping. Very high strength and excellent wear resistance for low-impact applications. 

Application: Extremely thin punches or tools with very fine features will benefit from the ultrafine submicron grain structure, which helps to prevent premature corner washout and maintain edge strength. Also, may be used as an upgrade to CD650, due to increased hardness. 

K3109 Grade

K3109

Composition: This 12% Cobalt grade is well suited for high impact stamping and bending applications due to its coarse grain structure and high fracture toughness. 

Application: Impacting punches, Coining dies, Forming dies, Can die punches, Swaging dies, Cold forming, Back extrusion punches & dies, high-impact extrusion dies, Nail grip dies, Very severe draw dies for .075" thick cold rolled steel, Piercing punches-305 stainless, Works well on gummy steel. 


EDM Blocks Brochure

Check out our brochure for additional information on EDM Blocks.

View Now
Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Over All Length [L]
Over All Length [L]
  • 4.134 in (196)
  • 4.724 in (28)
  • 5.906 in (8)
  • 5.969 in (14)
  • 7.941 in (2)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 105.0 mm (196)
  • 120.0 mm (28)
  • 150.0 mm (8)
  • 151.6 mm (14)
  • 201.701 mm (2)
Over All Length [L] Min to Over All Length [L] Max
Overall Width
Overall Width
  • 2.205 in (28)
  • 2.803 in (2)
  • 3.988 in (14)
  • 4.134 in (196)
  • 5.906 in (8)
Overall Width Min to Overall Width Max
Overall Width
Overall Width
  • 56.0 mm (28)
  • 71.2 mm (2)
  • 101.301 mm (14)
  • 105.0 mm (196)
  • 150.0 mm (8)
Overall Width Min to Overall Width Max
Thickness
Thickness
  • 1.0 mm (4)
  • 1.5 mm (6)
  • 2.0 mm (5)
  • 2.5 mm (6)
  • 3.0 mm (5)
  • 3.5 mm (5)
  • 4.0 mm (5)
  • 4.5 mm (5)
  • 5.0 mm (6)
  • 5.5 mm (5)
  • 6.0 mm (4)
  • 6.5 mm (7)
  • 7.0 mm (5)
  • 7.5 mm (5)
  • 8.0 mm (6)
  • 8.5 mm (8)
  • 9.0 mm (4)
  • 9.5 mm (5)
  • 10.0 mm (6)
  • 10.5 mm (6)
  • 11.0 mm (3)
  • 11.5 mm (2)
  • 12.0 mm (8)
  • 12.5 mm (5)
  • 13.0 mm (1)
  • 13.5 mm (2)
  • 14.0 mm (2)
  • 14.5 mm (3)
  • 15.0 mm (6)
  • 15.5 mm (2)
  • 16.0 mm (4)
  • 16.5 mm (2)
  • 17.0 mm (1)
  • 17.5 mm (1)
  • 18.0 mm (3)
  • 18.5 mm (1)
  • 19.0 mm (3)
  • 19.5 mm (1)
  • 20.0 mm (6)
  • 20.5 mm (4)
  • 21.0 mm (3)
  • 22.0 mm (2)
  • 23.0 mm (4)
  • 24.0 mm (1)
  • 25.0 mm (6)
  • 25.5 mm (2)
  • 26.0 mm (2)
  • 28.5 mm (2)
  • 30.0 mm (5)
  • 30.6 mm (2)
  • 32.0 mm (2)
  • 35.0 mm (4)
  • 38.0 mm (1)
  • 40.0 mm (2)
  • 41.5 mm (1)
  • 44.5 mm (1)
  • 45.0 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (2)
  • 51.0 mm (3)
  • 52.0 mm (1)
  • 53.0 mm (1)
  • 53.5 mm (1)
  • 54.0 mm (1)
  • 55.0 mm (3)
  • 55.5 mm (2)
  • 57.0 mm (2)
  • 58.0 mm (1)
  • 60.0 mm (4)
  • 60.5 mm (2)
  • 63.2 mm (2)
  • 63.5 mm (2)
  • 65.0 mm (1)
  • 70.0 mm (2)
  • 76.5 mm (2)
  • 85.5 mm (2)
  • 89.0 mm (2)
Thickness Min to Thickness Max
Thickness
Thickness
  • 0.039 in (4)
  • 0.06 in (6)
  • 0.079 in (5)
  • 0.098 in (6)
  • 0.119 in (5)
  • 0.138 in (5)
  • 0.157 in (5)
  • 0.177 in (5)
  • 0.197 in (6)
  • 0.217 in (5)
  • 0.237 in (4)
  • 0.256 in (7)
  • 0.276 in (5)
  • 0.295 in (5)
  • 0.315 in (6)
  • 0.335 in (8)
  • 0.354 in (4)
  • 0.374 in (5)
  • 0.394 in (6)
  • 0.414 in (6)
  • 0.433 in (3)
  • 0.453 in (2)
  • 0.473 in (8)
  • 0.492 in (5)
  • 0.512 in (1)
  • 0.531 in (2)
  • 0.551 in (2)
  • 0.572 in (3)
  • 0.591 in (6)
  • 0.61 in (2)
  • 0.63 in (4)
  • 0.65 in (2)
  • 0.669 in (1)
  • 0.69 in (1)
  • 0.709 in (3)
  • 0.728 in (1)
  • 0.748 in (3)
  • 0.768 in (1)
  • 0.787 in (6)
  • 0.807 in (4)
  • 0.828 in (3)
  • 0.866 in (2)
  • 0.906 in (4)
  • 0.946 in (1)
  • 0.984 in (6)
  • 1.004 in (2)
  • 1.024 in (2)
  • 1.122 in (2)
  • 1.181 in (5)
  • 1.205 in (2)
  • 1.26 in (2)
  • 1.379 in (4)
  • 1.496 in (1)
  • 1.575 in (2)
  • 1.635 in (1)
  • 1.752 in (1)
  • 1.772 in (1)
  • 1.969 in (3)
  • 2.0 in (2)
  • 2.008 in (3)
  • 2.047 in (1)
  • 2.087 in (1)
  • 2.106 in (1)
  • 2.126 in (1)
  • 2.165 in (3)
  • 2.185 in (2)
  • 2.244 in (2)
  • 2.283 in (1)
  • 2.362 in (4)
  • 2.382 in (2)
  • 2.488 in (2)
  • 2.5 in (2)
  • 2.559 in (1)
  • 2.757 in (2)
  • 3.012 in (2)
  • 3.366 in (2)
  • 3.504 in (2)
Thickness Min to Thickness Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?