Tooling Systems

Browse Tooling Systems Clearance Center Items

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (5)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (5)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (5)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (5)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (5)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (5)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (5)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (5)
  • M Stainless Steel (5)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (5)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (5)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (5)
  • K Cast Iron (5)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (5)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (5)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (5)
  • N Non-Ferrous Materials (5)
    • N1
      Wrought Aluminum
      (5)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (5)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (5)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (5)
    • N6
      Carbon, Graphite Composites, CFRP
      (5)
    • N7
      MMC's
      (4)
  • S High-Temp Alloys (5)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (5)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (5)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (5)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (5)
  • H Hardened Materials (4)
    • H1
      Hardened Materials 44-48 HRC
      (4)
    • H2
      Hardened Materials 48-55 HRC
      (4)
    • H3
      Hardened Materials 56-60 HRC
      (4)
    • H4
      Hardened Materials >60 HRC
      (4)
Applications
  • Grooving Grooving (1)
  • ID Grooving ID Grooving (1)
  • Multiple Direction Cutting Multiple Direction Cutting (3)
Type of Thread
  • 60 (1)
  • ACME (1)
  • API (1)
  • API RD (1)
  • BSW (1)
  • BUTTRESS (1)
  • M (1)
  • NPT (1)
  • STUB ACME (1)
  • UN (1)
  • UNJ (1)
Cutting Condition
  • Heavily Interrupted Cut (5)
  • Lightly Interrupted Cut (5)
  • Smooth Cut (5)
  • Varying Depth of Cut (5)
Tool Cutting Edge Angle
  • 45.0 (1)
  • 72.5 (1)
  • 90.0 (2)
  • 93.0 (1)
  • 107.5 (1)
to
Connection Style
  • KM (3)
  • PSC (1)
Cutting Edges Per Insert
  • 1.0 (5)
  • 2.0 (4)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.026 (1)
  • 0.03 (2)
  • 0.038 (2)
  • 0.051 (1)
  • 0.066 (1)
  • 0.076 (1)
  • 0.08 (1)
  • 0.089 (1)
  • 0.09 (1)
  • 0.094 (1)
  • 0.1 (4)
  • 0.102 (1)
  • 0.116 (1)
  • 0.127 (1)
  • 0.131 (1)
  • 0.132 (1)
  • 0.133 (1)
  • 0.15 (1)
  • 0.155 (1)
  • 0.157 (1)
  • 0.165 (1)
  • 0.173 (1)
  • 0.178 (1)
  • 0.19 (1)
  • 0.191 (1)
  • 0.198 (1)
  • 0.2 (5)
  • 0.202 (1)
  • 0.224 (1)
  • 0.235 (1)
  • 0.244 (1)
  • 0.25 (1)
  • 0.251 (1)
  • 0.254 (1)
  • 0.255 (1)
  • 0.269 (1)
  • 0.282 (1)
  • 0.284 (1)
  • 0.3 (2)
  • 0.315 (1)
  • 0.318 (1)
  • 0.33 (1)
  • 0.34 (1)
  • 0.343 (1)
  • 0.356 (1)
  • 0.397 (2)
  • 0.4 (3)
  • 0.404 (1)
  • 0.406 (1)
  • 0.43 (1)
  • 0.445 (1)
  • 0.472 (1)
  • 0.49 (1)
  • 0.508 (1)
  • 0.572 (1)
  • 0.575 (1)
  • 0.787 (1)
  • 0.794 (2)
  • 0.8 (2)
  • 0.902 (1)
  • 1.0 (1)
  • 1.194 (1)
  • 1.25 (1)
  • 1.5 (2)
  • 1.525 (1)
  • 1.585 (1)
  • 1.588 (2)
  • 1.59 (1)
  • 1.75 (1)
  • 1.981 (1)
  • 2.0 (1)
  • 2.25 (1)
  • 2.388 (1)
to
Corner Radius
  • 0.0011 (2)
  • 0.0015 (2)
  • 0.002 (1)
  • 0.0026 (1)
  • 0.003 (1)
  • 0.0031 (1)
  • 0.0035 (1)
  • 0.0037 (1)
  • 0.004 (4)
  • 0.0046 (1)
  • 0.005 (1)
  • 0.0052 (1)
  • 0.0053 (1)
  • 0.0059 (1)
  • 0.006 (1)
  • 0.0062 (1)
  • 0.0065 (1)
  • 0.0068 (1)
  • 0.007 (1)
  • 0.0075 (1)
  • 0.0078 (1)
  • 0.0079 (1)
  • 0.008 (5)
  • 0.0088 (1)
  • 0.0093 (1)
  • 0.0096 (1)
  • 0.0099 (1)
  • 0.01 (1)
  • 0.0106 (1)
  • 0.0111 (1)
  • 0.0112 (1)
  • 0.0118 (1)
  • 0.012 (1)
  • 0.0124 (1)
  • 0.0125 (1)
  • 0.013 (1)
  • 0.0135 (1)
  • 0.014 (1)
  • 0.0156 (2)
  • 0.0159 (1)
  • 0.016 (2)
  • 0.017 (1)
  • 0.0175 (1)
  • 0.0186 (1)
  • 0.0193 (1)
  • 0.02 (1)
  • 0.0225 (1)
  • 0.031 (1)
  • 0.0312 (2)
  • 0.0313 (2)
  • 0.0355 (1)
  • 0.0394 (1)
  • 0.047 (1)
  • 0.0492 (1)
  • 0.059 (1)
  • 0.0591 (2)
  • 0.06 (1)
  • 0.062 (1)
  • 0.0625 (2)
  • 0.063 (1)
  • 0.0689 (1)
  • 0.078 (1)
  • 0.0787 (1)
  • 0.0886 (1)
  • 0.094 (1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • HT2 (2)
  • HTX (2)
  • K10M (2)
  • K10P (2)
  • K10U (2)
  • K15U (2)
  • K20K (2)
  • K25M (2)
  • K25P (2)
  • K2885 (1)
  • K313 (4)
  • K420 (1)
  • K4H (1)
  • K68 (3)
  • KB1345 (1)
  • KB1630 (2)
  • KB5625 (2)
  • KBH10 (2)
  • KBH20 (2)
  • KC250 (1)
  • KC5010 (4)
  • KC5020P (2)
  • KC5025 (5)
  • KC5410 (3)
  • KC710 (1)
  • KC720 (3)
  • KC722 (1)
  • KC730 (3)
  • KC732 (3)
  • KC8050 (2)
  • KC810 (3)
  • KC850 (3)
  • KC9025 (2)
  • KC910 (3)
  • KC9105 (2)
  • KC9110 (4)
  • KC9120 (1)
  • KC9125 (3)
  • KC9225 (2)
  • KC9240 (2)
  • KC9240NEW (2)
  • KC9315 (2)
  • KC9320 (3)
  • KC935 (3)
  • KC950 (1)
  • KCD25 (2)
  • KCK05 (2)
  • KCK05B (2)
  • KCK20 (4)
  • KCK20B (3)
  • KCM15 (2)
  • KCM25 (2)
  • KCM25B (2)
  • KCP05 (2)
  • KCP10 (3)
  • KCP10B (3)
  • KCP25 (3)
  • KCP25B (3)
  • KCP30 (2)
  • KCS10 (2)
  • KCS10B (2)
  • KCU10 (4)
  • KCU25 (5)
  • KD050 (1)
  • KD081 (1)
  • KD100 (1)
  • KD120 (1)
  • KD1400 (2)
  • KD1405 (1)
  • KD1425 (3)
  • KMF (1)
  • KMS (1)
  • KT175 (3)
  • KT315 (5)
  • KT325 (2)
  • KTP10 (3)
  • KU10 (3)
  • KU10T (3)
  • KU25T (2)
  • KU30T (4)
  • KY3000 (1)
  • KY3500 (1)
  • TN10P (2)
  • TN10U (2)
  • TN15M (2)
  • TN15U (2)
  • TN20K (2)
  • TN20P (2)
  • TN30M (2)
  • WDN25U (2)
  • WM15CT (2)
  • WM25CT (2)
  • WP15CT (2)
  • WP25CT (2)
Hand Of Tool
  • L (1)
  • N (1)
  • R (2)
Wiper Insert
  • N (5)
Bore Diameter [D1]
  • 0.0625 (1)
  • 0.079 (1)
  • 0.125 (3)
  • 0.1378 (2)
  • 0.1406 (1)
  • 0.141 (1)
  • 0.1563 (1)
  • 0.157 (1)
  • 0.1575 (1)
  • 0.1719 (1)
  • 0.1875 (2)
  • 0.2031 (1)
  • 0.2165 (1)
  • 0.2188 (1)
  • 0.219 (1)
  • 0.236 (2)
  • 0.2362 (2)
  • 0.248 (1)
  • 0.25 (3)
  • 0.2656 (1)
  • 0.266 (1)
  • 0.281 (1)
  • 0.297 (1)
  • 0.3125 (2)
  • 0.315 (3)
  • 0.323 (1)
  • 0.3438 (1)
  • 0.375 (4)
  • 0.3906 (1)
  • 0.3937 (4)
  • 0.394 (1)
  • 0.406 (1)
  • 0.4063 (1)
  • 0.422 (1)
  • 0.4375 (1)
  • 0.453 (1)
  • 0.472 (1)
  • 0.5 (5)
  • 0.516 (1)
  • 0.531 (1)
  • 0.551 (1)
  • 0.5512 (1)
  • 0.562 (1)
  • 0.5625 (3)
  • 0.63 (1)
  • 0.6875 (1)
  • 0.689 (1)
  • 0.709 (1)
  • 0.7283 (1)
  • 0.75 (3)
  • 0.7656 (1)
  • 0.7677 (1)
  • 0.787 (1)
  • 0.7874 (1)
  • 0.8 (1)
  • 0.875 (1)
  • 1.0 (3)
  • 1.2598 (1)
  • 1.4688 (1)
to
Bore Diameter [D1]
  • 1.588 (1)
  • 2.0 (1)
  • 3.175 (3)
  • 3.5 (2)
  • 3.571 (1)
  • 3.581 (1)
  • 3.97 (1)
  • 4.0 (2)
  • 4.366 (1)
  • 4.763 (2)
  • 5.159 (1)
  • 5.5 (1)
  • 5.558 (1)
  • 5.563 (1)
  • 6.0 (4)
  • 6.3 (1)
  • 6.35 (3)
  • 6.746 (1)
  • 6.756 (1)
  • 7.137 (1)
  • 7.544 (1)
  • 7.938 (2)
  • 8.0 (3)
  • 8.204 (1)
  • 8.733 (1)
  • 9.525 (4)
  • 9.921 (1)
  • 10.0 (5)
  • 10.312 (1)
  • 10.32 (1)
  • 10.719 (1)
  • 11.113 (1)
  • 11.506 (1)
  • 12.0 (1)
  • 12.7 (5)
  • 13.106 (1)
  • 13.487 (1)
  • 14.0 (2)
  • 14.275 (1)
  • 14.288 (3)
  • 16.0 (1)
  • 17.463 (1)
  • 17.5 (1)
  • 18.0 (1)
  • 18.5 (1)
  • 19.05 (3)
  • 19.446 (1)
  • 19.5 (1)
  • 20.0 (2)
  • 20.32 (1)
  • 22.225 (1)
  • 25.4 (3)
  • 32.0 (1)
  • 37.306 (1)
to
Minimum Axial Groove Diameter
  • 1.2598 (1)
  • 1.5748 (1)
  • 2.7559 (1)
  • 3.937 (1)
to
Minimum Axial Groove Diameter
  • 32.0 (1)
  • 40.0 (1)
  • 70.0 (1)
  • 100.0 (1)
to
Maximum Axial Groove Diameter
  • 9999.0 (1)
to
Maximum Axial Groove Diameter
  • 393.661 (1)
to
Cutting Direction
  • E (3)
  • S (1)
Rake Angle Style
  • DOUBLE NEGATIVE (1)
  • NEGATIVE-ZERO (1)
  • NEUTRAL (ZERO) (2)
Maximum Bore Depth
  • 98.18 (1)
to
Maximum Bore Depth
  • 3.865 (1)
to
Boring Bar Material
  • S (2)
Front-End
Clamp Style
  • M (1)
  • N (1)
  • S (2)
  • Y (2)
Adapter Front-End
  • BORING BAR ADAPTER (4)
  • DA COLLET CHUCK (8)
  • END MILL ADAPTER (10)
  • ER COLLET CHUCK (11)
  • EXTENSION (1)
  • HSK MODULAR ADAPTER (1)
  • HYDRAULIC CHUCK (21)
  • JACOBS/DIN ADAPTER (1)
  • KM MODULAR ADAPTER (5)
  • MORSE TAPER ADAPTER (1)
  • REDUCER (1)
  • SCREW-ON ADAPTER (4)
  • SHELL MILL ADAPTER (4)
  • SHRINK FIT ADAPTER (55)
  • SHRINK FIT SAFE-LOCK ADAPTER (1)
  • SQUARE SHANK ADAPTER (4)
  • TG COLLET CHUCK (9)
  • WHISTLE NOTCH ADAPTER (1)
Insert Shape
  • D-DIAMOND/RHOMBIC 55 (1)
  • PRISMATIC (2)
  • TN-TOP NOTCH (1)
  • V-DIAMOND/RHOMBIC 35 (2)
Front End Type
  • BFA - Drill Chuck Adapter (1)
  • DLK - DUO-LOCK Modular Connect (5)
  • FDA - Milling Cutter Arbor (5)
  • HSK - Hollow Taper Shank (1)
  • KMS - KM TBD System (2)
  • KMT - KM Adapter (5)
  • MKG - Morse Taper (1)
  • SZK - Collet Taper (28)
  • VKT - Square Shank (4)
  • ZYL - Cylindrical Adapter (96)
Cutting Width
  • 1.0 (1)
  • 1.194 (1)
  • 1.2 (1)
  • 1.5 (1)
  • 1.57 (1)
  • 1.575 (1)
  • 1.75 (1)
  • 1.829 (1)
  • 1.981 (1)
  • 2.0 (1)
  • 2.2 (1)
  • 2.235 (1)
  • 2.24 (1)
  • 2.388 (1)
  • 2.464 (1)
  • 2.5 (1)
  • 2.667 (1)
  • 2.743 (1)
  • 2.75 (1)
  • 2.794 (1)
  • 2.997 (1)
  • 3.0 (3)
  • 3.05 (2)
  • 3.099 (1)
  • 3.1 (1)
  • 3.12 (1)
  • 3.17 (1)
  • 3.175 (2)
  • 3.18 (1)
  • 3.2 (1)
  • 3.25 (1)
  • 3.251 (2)
  • 3.32 (1)
  • 3.329 (1)
  • 3.5 (1)
  • 3.607 (1)
  • 3.96 (1)
  • 3.962 (1)
  • 3.974 (1)
  • 3.988 (1)
  • 4.0 (1)
  • 4.242 (1)
  • 4.25 (1)
  • 4.3 (1)
  • 4.5 (1)
  • 4.521 (1)
  • 4.699 (1)
  • 4.775 (1)
  • 4.8 (1)
  • 4.801 (1)
  • 4.81 (1)
  • 4.88 (1)
  • 4.95 (1)
to
Cutting Width
  • 0.0394 (1)
  • 0.047 (1)
  • 0.0472 (1)
  • 0.0591 (1)
  • 0.062 (1)
  • 0.0689 (1)
  • 0.072 (1)
  • 0.078 (1)
  • 0.0787 (1)
  • 0.079 (1)
  • 0.0866 (1)
  • 0.088 (1)
  • 0.094 (1)
  • 0.097 (1)
  • 0.0984 (1)
  • 0.105 (1)
  • 0.108 (1)
  • 0.1083 (1)
  • 0.11 (1)
  • 0.118 (3)
  • 0.1181 (1)
  • 0.119 (1)
  • 0.12 (1)
  • 0.1201 (1)
  • 0.122 (2)
  • 0.123 (1)
  • 0.125 (2)
  • 0.126 (1)
  • 0.128 (2)
  • 0.131 (1)
  • 0.1378 (1)
  • 0.142 (1)
  • 0.156 (1)
  • 0.157 (1)
  • 0.1574 (1)
  • 0.1575 (1)
  • 0.167 (1)
  • 0.1673 (1)
  • 0.169 (1)
  • 0.1771 (1)
  • 0.1772 (1)
  • 0.178 (1)
  • 0.185 (1)
  • 0.188 (1)
  • 0.189 (1)
  • 0.192 (1)
  • 0.195 (1)
to
Maximum Cutting Depth
  • 8.0 (1)
  • 16.0 (1)
to
Maximum Cutting Depth
  • 0.315 (1)
  • 0.6299 (1)
to
Insert Size
  • 3 (2)
Front End Style
  • BFA02 Jacobs Chuck Taper (1)
  • DLK01 DUO-LOCK (5)
  • FDA02 Transversal Drive (3)
  • FDA12 Transv Drive&CutRetScr (1)
  • FDA22 Transv Drive & SHCS (1)
  • HSK01 Sm Contact Surf A/C (1)
  • KMS-01 Std KM-TBD NotOnCntr (1)
  • KMS-02 Englarged Flange OnCntr (1)
  • KMT00 All KM, except 02,05,09 (5)
  • MKG20Expel Key w/o Coolant (1)
  • SZK02 Collets 8 Degree Taper (3)
  • SZK03 TG Collets (9)
  • SZK04 DA Collets (8)
  • SZK08 Collets 8°Tpr w/xLen BE (8)
  • VKT01 Std Design (4)
  • ZYL01 Straight Shank (76)
  • ZYL03 Attachment Thread (4)
  • ZYL10 Weldon Shank (10)
  • ZYL13 2Deg-Whistle Notch (1)
  • ZYL22 Boring Bar Shank (4)
  • ZYL28 SAFE-LOCK (1)
Gage Length
  • 16.0000 (1)
  • 17.0000 (1)
  • 19.3000 (1)
  • 22.2200 (1)
  • 25.0000 (2)
  • 25.4000 (1)
  • 25.5270 (1)
  • 28.0000 (1)
  • 35.0000 (1)
  • 35.0520 (1)
  • 37.0840 (1)
  • 41.0000 (1)
  • 42.0000 (1)
  • 44.4500 (2)
  • 44.9580 (1)
  • 47.6250 (1)
  • 50.0000 (1)
  • 53.0000 (1)
  • 55.0000 (2)
  • 56.0000 (1)
  • 58.6750 (2)
  • 60.0000 (3)
  • 63.0000 (2)
  • 63.5000 (1)
  • 65.0000 (2)
  • 68.0000 (2)
  • 70.0000 (7)
  • 74.6800 (1)
  • 75.0000 (5)
  • 78.0400 (1)
  • 80.0000 (13)
  • 82.5500 (1)
  • 84.0000 (1)
  • 85.0000 (4)
  • 88.9000 (1)
  • 90.0000 (11)
  • 95.0000 (7)
  • 95.2500 (5)
  • 100.0000 (16)
  • 101.6000 (10)
  • 109.0000 (1)
  • 112.0000 (1)
  • 115.0000 (2)
  • 116.0200 (1)
  • 120.0000 (2)
  • 140.0000 (1)
  • 150.0000 (4)
  • 152.4000 (9)
  • 160.0000 (5)
  • 160.0200 (1)
  • 200.0000 (1)
  • 203.2000 (3)
  • 279.4000 (2)
  • 381.0000 (2)
  • 410.0000 (1)
  • 492.3000 (1)
  • 1001.9000 (1)
Gage Length
  • 0.6299 (1)
  • 0.6693 (1)
  • 0.7600 (1)
  • 0.8750 (1)
  • 0.9840 (2)
  • 1.0000 (1)
  • 1.0050 (1)
  • 1.1020 (1)
  • 1.3780 (1)
  • 1.3800 (1)
  • 1.4600 (1)
  • 1.6140 (1)
  • 1.6540 (1)
  • 1.7500 (2)
  • 1.7700 (1)
  • 1.8750 (1)
  • 1.9685 (1)
  • 2.0870 (1)
  • 2.1654 (2)
  • 2.2050 (1)
  • 2.3100 (2)
  • 2.3620 (1)
  • 2.3622 (2)
  • 2.4800 (2)
  • 2.5000 (1)
  • 2.5590 (2)
  • 2.6770 (1)
  • 2.6772 (1)
  • 2.7559 (1)
  • 2.7560 (4)
  • 2.7600 (2)
  • 2.9402 (1)
  • 2.9500 (4)
  • 2.9530 (1)
  • 3.0720 (1)
  • 3.1496 (4)
  • 3.1500 (9)
  • 3.2500 (1)
  • 3.3070 (1)
  • 3.3460 (1)
  • 3.3465 (3)
  • 3.5000 (1)
  • 3.5400 (1)
  • 3.5430 (5)
  • 3.5433 (5)
  • 3.7400 (4)
  • 3.7402 (3)
  • 3.7500 (5)
  • 3.9370 (13)
  • 3.9400 (3)
  • 4.0000 (10)
  • 4.2910 (1)
  • 4.4094 (1)
  • 4.5300 (2)
  • 4.5677 (1)
  • 4.7200 (1)