Notifications

Mark all as read
Screw-On Inserts
Screw-On Inserts
Screw-On Inserts
Screw-On Inserts

Positive Inserts • CCMT-MP

Screw-On Inserts

Features and benefits

  • Beyond™ Drive™ grades included.

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • M Stainless Steel (6)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (6)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (6)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6)
  • S High-Temp Alloys (6)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (6)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (6)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (6)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (6)
Select First Choice
  • US (2)
Cutting Condition
Cutting Condition
  • Smooth Cut (6)
  • Varying Depth of Cut (6)
Corner configuration
Corner Radius
Corner Radius
  • 0.016 in (3)
  • 0.031 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (3)
  • 0.8 mm (3)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Smooth Cut (6)
  • Varying Depth of Cut (6)
Insert Geometry
Insert IC Size
Insert IC Size
  • 6.351 mm (2)
  • 9.525 mm (2)
  • 12.701 mm (2)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.25 in (2)
  • 0.375 in (2)
  • 0.5 in (2)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.45 mm (2)
  • 9.675 mm (2)
  • 12.9 mm (2)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.01 in (2)
  • 0.015 in (2)
  • 0.02 in (2)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MP (5)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
  • High Performance Inserts
Displaying 1- 6 of 6 results
Select Columns
Select Filters
Metric
Inch
Show
    • Applied Filters:
    • Clear all filters
  • X Grade: KCS10B
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
6686915 CCMT060204MP CCMT2151MP KCS10B 6.3500 .2500 6.4480 .2539 2.3810 .0938 0.4000 .0156 2.8000 .1100  
    List price:
    $22.42 /each.
    Your price::
    Qty
    6686916 CCMT060208MP CCMT2152MP KCS10B 6.3500 .2500 6.4480 .2539 2.3810 .0938 0.8000 .0312 2.8000 .1100  
      List price:
      $22.42 /each.
      Your price::
      Qty
      6686917 CCMT09T304MP CCMT3251MP KCS10B   9.5250 .3750 9.6720 .3808 3.9700 .1563 0.4000 .0156 4.4000 .1732
        List price:
        $21.66 /each.
        Your price::
        Qty
        6686918 CCMT09T308MP CCMT3252MP KCS10B 9.5250 .3750 9.6720 .3808 3.9690 .1563 0.8000 .0312 4.4000 .1732  
          List price:
          $21.66 /each.
          Your price::
          Qty
          6686919 CCMT120404MP CCMT431MP KCS10B 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.4000 .0156 5.5000 .2165  
            List price:
            $25.12 /each.
            Your price::
            Qty
            6686920 CCMT120408MP CCMT432MP KCS10B 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.8000 .0312 5.5000 .2165  
              List price:
              $25.12 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              Grades

              • KCK20

                A new PVD multilayer AlTiN + AlCrN coated carbide with an excellent combination of wear resistance and coating strength. The KCK20 grade is specifically engineered to maximize coating adhesion and edge strength, making this grade ideal in wet interrupted cutting of gray and ductile irons, and can also be used in dry conditions. It can be used in a wide range of applications, from finishing to roughing, to maximize productivity wherever strength and reliability are needed.

                P Steel
                K Cast Iron
              • KCK20B

                Composition: A multilayered coating with thick MTCVD TiCN-Al2O3-TiOCN layers applied over a carbide substrate specifically engineered for cast irons.
                Application: Delivers consistent performance in high-speed machining of grey and ductile irons. The substrate design permits the insert to stay in the cut for a long time at high speeds with minimum deformation. The thick CVD coating and post-coat treatment provide superior wear resistance ensuring long and consistent tool life. Can be applied both in straight and lightly interrupted cuts.

                P Steel
                K Cast Iron
              • KCM15

                Composition: Nanostructured PVD TiAlN coated fine-grain carbide with a golden TiN top layer for better wear identification and superior surface finish.
                Application: A state-of-the-art surface condition enhances low adhesion potential to stainless steel materials and offers superior chip evacuation even in low-pressure coolant applications. Applicable for stainless steel and high-temperature resistant materials.

                P Steel
                S High-Temp Alloys
                M Stainless Steel
              • KCM15B

                Composition: A multilayer MTCVD-TiCN-Al2O3 coated carbide grade.

                Application: An excellent finishing to medium machining grade for austenitic stainless steels at higher speeds and covers a broad range of steel applications in the P20-25 range. KCM15 grade in combination with unique geometries have been designed to resist depth-of-cut notching and minimize burr formation. The post-coat treatment reduces coating stresses, improves coating adhesion, minimizes microchipping and edge build-up, and improves workpiece finish.

                P Steel
                S High-Temp Alloys
                M Stainless Steel
              • KCM25

                Composition: A multilayer CVD coating comprised of TiN-MT-TiCN-Al2O3 layers over a tough, cobalt-enriched carbide substrate.
                Application: This CVD-coated grade is designed for general-purpose machining of austenitic stainless steels at moderate speeds and feeds. KCM25 inserts offer an extraordinary combination of toughness, built-up edge resistance, and wear resistance in stainless steel applications.

                P Steel
                S High-Temp Alloys
                M Stainless Steel
              • KCM25B

                Composition: A multilayer MTCVD-TiCN-Al2O3-TiOCN coated carbide grade.

                Application: An excellent finishing to medium machining grade for austenitic stainless steels at higher speeds and covers a broad range of steel applications in the P20-25 range. KCM15 grade in combination with unique geometries have been designed to resist depth-of-cut notching and minimize burr formation. The post-coat treatment reduces coating stresses, improves coating adhesion, minimizes microchipping and edge build-up, and improves workpiece finish.

                P Steel
                S High-Temp Alloys
                M Stainless Steel
              • KCP10

                Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3 coating for maximum wear resistance.
                Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

                P Steel
                K Cast Iron
              • KCP25

                Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3 coating with superior interlayer adhesion.
                Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

                P Steel
                K Cast Iron
              • KCS10

                Composition: An advanced PVD-AlTiN coated, fine-grained tungsten carbide grade.
                Application: The KCS10 grade specifically engineered for the productive machining of high-temperature alloys. The fine-grained tungsten carbide substrate has excellent toughness and deformation resistance while the advanced PVD coating allows metalcutting speeds double those of conventional PVD-coated cutting tools.

                S High-Temp Alloys
                M Stainless Steel
              • KCS10B

                Composition: PVD-AlTiN coating with a very smooth coating surface and extremely hard, wear-resistant ultra fine-grain carbide substrate.
                Application: The KCS10B™ grade is ideal for medium machining and finishing operations of Nickel-Based, Cobalt-Based, and Iron-Based High-Temperature Alloys. The extremely hard, wear-resistant carbide substrate allows for longer tool life while the ultra fine-grain carbide substrate and smoother coating reduces friction.

                S High-Temp Alloys
                M Stainless Steel
              • KCU10

                Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.

                Application: The KCU10™ grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

                P Steel
                S High-Temp Alloys
                M Stainless Steel
              product-image
              Please adjust the following properties from

              ISO Catalog Number

              ANSI Catalog Number

              to find similar products.
              You are about to create a duplicate . Do you want to proceed?
              You are about to delete Do you want to proceed?
              What would you like to rename your to?
              Please enter a valid name
              Please enter a name for the duplicate
              Please enter a valid name
              You are about to add to your My Solutions page. Do you want to proceed?
              Please enter a valid name
              Send a copy of

              Please enter a valid Email
              Please enter a valid name

              The following CAD files are available

              Please select a file to download

              You should be logged to see your dashboard information
              Session expired due to inactivity, please login again
              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
              item(s) successfully added to the cart
              View Cart