欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车

KTMD

选择筛选器
筛选器
筛选器
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (60)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (60)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (60)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS (60)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS (60)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS (60)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS (60)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS (60)
  • M 不锈钢 (60)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS (60)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS (60)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS (60)
  • K 铸铁 (60)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS (60)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS (60)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS (60)
  • S 高温合金 (47)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS (47)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS (47)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS (47)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS (47)
  • H 淬火材料 (46)
    • H1
      淬火材料 44-48 HRC (46)
应用
应用
  • ID Thread Turning ID Thread Turning (27)
  • Pipe Thread Pipe Thread (33)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (33)
  • Shoulder Roughing Shoulder Roughing (33)
  • Shoulder Square End Shoulder Square End (33)
  • Thread Milling Thread Milling (33)
  • Threading Threading (33)
切削直径
切削直径
  • 0.579 in (1)
  • 0.58 in (1)
  • 0.581 in (1)
  • 0.591 in (1)
  • 0.677 in (1)
  • 0.681 in (1)
  • 0.787 in (2)
  • 0.811 in (2)
  • 0.906 in (1)
  • 0.909 in (2)
  • 0.917 in (1)
  • 1.02 in (2)
  • 1.024 in (2)
  • 1.22 in (4)
  • 1.417 in (1)
  • 1.437 in (1)
  • 1.441 in (2)
  • 1.651 in (1)
  • 1.655 in (2)
  • 1.69 in (1)
  • 1.891 in (1)
  • 2.09 in (1)
  • 2.205 in (1)
切削直径 Min 到 切削直径 Max
切削直径
切削直径
  • 14.701 mm (1)
  • 14.726 mm (1)
  • 14.75 mm (1)
  • 15.0 mm (1)
  • 17.2 mm (1)
  • 17.3 mm (1)
  • 20.0 mm (2)
  • 20.6 mm (2)
  • 23.0 mm (1)
  • 23.1 mm (2)
  • 23.3 mm (1)
  • 25.901 mm (2)
  • 26.0 mm (2)
  • 31.0 mm (4)
  • 36.0 mm (1)
  • 36.5 mm (1)
  • 36.6 mm (2)
  • 41.901 mm (1)
  • 42.0 mm (2)
  • 42.926 mm (1)
  • 48.0 mm (1)
  • 53.075 mm (1)
  • 56.0 mm (1)
切削直径 Min 到 切削直径 Max
范围
范围
  • 1.567 in (1)
  • 1.575 in (2)
  • 1.579 in (2)
  • 1.78 in (1)
  • 1.788 in (1)
  • 2.559 in (1)
  • 2.561 in (1)
  • 2.567 in (1)
  • 2.575 in (2)
  • 2.693 in (1)
  • 2.961 in (1)
  • 2.969 in (1)
  • 3.209 in (1)
  • 3.358 in (2)
  • 3.362 in (2)
  • 3.598 in (1)
  • 3.95 in (1)
  • 3.954 in (1)
  • 4.055 in (1)
  • 4.059 in (1)
  • 4.346 in (1)
  • 4.358 in (1)
  • 4.728 in (1)
  • 4.74 in (1)
  • 5.039 in (2)
  • 5.428 in (1)
  • 5.984 in (1)
范围 Min 到 范围 Max
范围
范围
  • 39.801 mm (1)
  • 40.0 mm (2)
  • 40.1 mm (2)
  • 45.2 mm (1)
  • 45.401 mm (1)
  • 65.0 mm (1)
  • 65.05 mm (1)
  • 65.2 mm (1)
  • 65.4 mm (2)
  • 68.4 mm (1)
  • 75.2 mm (1)
  • 75.4 mm (1)
  • 81.5 mm (1)
  • 85.301 mm (2)
  • 85.4 mm (2)
  • 91.4 mm (1)
  • 100.301 mm (1)
  • 100.4 mm (1)
  • 103.0 mm (1)
  • 103.101 mm (1)
  • 110.4 mm (1)
  • 110.7 mm (1)
  • 120.101 mm (1)
  • 120.4 mm (1)
  • 128.0 mm (2)
  • 137.875 mm (1)
  • 152.0 mm (1)
范围 Min 到 范围 Max
刀具切削刃角度
刀具切削刃角度
  • 90.0 (33)
刀具切削刃角度 Min 到 刀具切削刃角度 Max
连接类型
连接类型
  • A-Socket Head Cap Screw (5)
  • Straight-Cylindrical (14)
  • Weldon (14)
排屑槽数量
排屑槽数量
  • 1 (4)
  • 2 (10)
  • 3 (8)
  • 4 (8)
  • 5 (2)
  • 6 (1)
内部冷却液性能
内部冷却液性能
总长 [L]
总长 [L]
  • 1.567 in (1)
  • 1.575 in (2)
  • 1.579 in (2)
  • 3.74 in (1)
  • 3.761 in (1)
  • 4.72 in (1)
  • 4.724 in (1)
  • 4.843 in (1)
  • 4.921 in (1)
  • 5.197 in (1)
  • 5.299 in (1)
  • 5.315 in (2)
  • 5.351 in (1)
  • 5.382 in (1)
  • 5.598 in (1)
  • 5.787 in (1)
  • 5.791 in (1)
  • 6.37 in (1)
  • 6.449 in (1)
  • 6.457 in (1)
  • 6.535 in (2)
  • 7.202 in (1)
  • 7.323 in (1)
  • 7.702 in (1)
  • 7.718 in (1)
  • 7.819 in (1)
  • 7.913 in (1)
  • 8.35 in (1)
  • 8.74 in (1)
总长 [L] Min 到 总长 [L] Max
总长 [L]
总长 [L]
  • 39.801 mm (1)
  • 40.0 mm (2)
  • 40.1 mm (2)
  • 95.0 mm (1)
  • 95.5 mm (1)
  • 119.9 mm (1)
  • 120.0 mm (1)
  • 123.0 mm (1)
  • 125.0 mm (1)
  • 132.0 mm (1)
  • 134.6 mm (1)
  • 135.0 mm (2)
  • 135.9 mm (1)
  • 136.701 mm (1)
  • 142.201 mm (1)
  • 147.0 mm (1)
  • 147.1 mm (1)
  • 161.8 mm (1)
  • 163.8 mm (1)
  • 164.0 mm (1)
  • 166.0 mm (2)
  • 182.9 mm (1)
  • 186.0 mm (1)
  • 195.601 mm (1)
  • 196.0 mm (1)
  • 198.601 mm (1)
  • 201.0 mm (1)
  • 212.101 mm (1)
  • 222.0 mm (1)
总长 [L] Min 到 总长 [L] Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.002 in (37)
  • 0.003 in (34)
  • 0.004 in (28)
  • 0.006 in (35)
  • 0.01 in (37)
  • 0.011 in (13)
刀尖半径 Min 到 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.05 mm (37)
  • 0.076 mm (34)
  • 0.1 mm (28)
  • 0.151 mm (35)
  • 0.25 mm (37)
  • 0.275 mm (13)
刀尖半径 Min 到 刀尖半径 Max
application
切削刀具材质
切削刀具材质
  • KC610M (47)
  • KC635M (46)
刀具手式
刀具手式
  • R (33)
锪沉孔角度
锪沉孔角度
  • 27.5 (11)
  • 30.0 (16)
锪沉孔角度 Min 到 锪沉孔角度 Max
frontEnd
Thread TPI
Thread TPI
  • 6.0 (15)
  • 10.0 (39)
  • 11.0 (35)
  • 12.0 (4)
  • 16.0 (38)
  • 48.0 (24)
Thread TPI Min 到 Thread TPI Max
螺纹螺距
螺纹螺距
  • 1.5 mm (22)
  • 2.0 mm (35)
  • 2.5 mm (6)
  • 3.5 mm (13)
  • 4.0 mm (22)
  • 6.0 mm (13)
螺纹螺距 Min 到 螺纹螺距 Max
螺纹螺距
螺纹螺距
  • 0.06 in (22)
  • 0.079 in (35)
  • 0.098 in (6)
  • 0.138 in (13)
  • 0.157 in (22)
  • 0.237 in (13)
螺纹螺距 Min 到 螺纹螺距 Max
中心切削
中心切削
insertGeometry
形状
形状
  • LT-TRIANGLE LAY DOWN THREAD 60 (27)
刀片 IC 尺寸
刀片 IC 尺寸
  • 6.351 mm (16)
  • 9.525 mm (11)
刀片 IC 尺寸 Min 到 刀片 IC 尺寸 Max
刀片 IC 尺寸
刀片 IC 尺寸
  • 0.25 in (16)
  • 0.375 in (11)
刀片 IC 尺寸 Min 到 刀片 IC 尺寸 Max
刀座规格
刀座规格
  • 11 (16)
  • 16 (11)
切削刃长度
切削刃长度
  • 11.0 mm (16)
  • 16.0 mm (11)
切削刃长度 Min 到 切削刃长度 Max
切削刃长度
切削刃长度
  • 0.433 in (16)
  • 0.63 in (11)
切削刃长度 Min 到 切削刃长度 Max
切削刀具材料
切削刀具材料
  • H W (27)
backEnd
连接类型
连接类型
  • CYLINDRICAL (28)
  • SHELL MILL (5)
后端直径
后端直径
  • 10.701 mm (1)
  • 11.101 mm (1)
  • 12.701 mm (1)
  • 14.0 mm (1)
  • 14.3 mm (1)
  • 15.9 mm (3)
  • 16.0 mm (3)
  • 18.0 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (1)
  • 22.0 mm (2)
  • 25.0 mm (4)
  • 25.401 mm (5)
  • 28.0 mm (1)
  • 31.8 mm (2)
  • 32.0 mm (2)
  • 38.1 mm (1)
  • 40.0 mm (1)
后端直径 Min 到 后端直径 Max
后端直径
后端直径
  • 0.421 in (1)
  • 0.437 in (1)
  • 0.5 in (1)
  • 0.551 in (1)
  • 0.564 in (1)
  • 0.626 in (3)
  • 0.63 in (3)
  • 0.709 in (1)
  • 0.748 in (1)
  • 0.75 in (1)
  • 0.787 in (1)
  • 0.866 in (2)
  • 0.984 in (4)
  • 1.0 in (5)
  • 1.102 in (1)
  • 1.252 in (2)
  • 1.26 in (2)
  • 1.5 in (1)
  • 1.575 in (1)
后端直径 Min 到 后端直径 Max
No filters matching ""

1/4 iC

(43) 1/4 iC

3/8 iC

(17) 3/8 iC
您即将把 添加至“我的解决方案”页面. 是否要继续？
product-image
Please adjust the following properties from

ISO Catalog

ANSI Catalog

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

应记录以查看仪表盘信息
Session expired due to inactivity, please login again
您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
件物品已成功添加到购物车
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

您已注册成功，现在就可以登录并使用网站了。

You are about to leave the Solution building process.

Are you sure you want to leave?