successfully added to cart
View Cart

Notifications

Mark all as read

用于铝电机壳加工的3D打印主孔加工刀具

该款刀具采用全新设计的臂式结构,大尺寸中部管状结构由碳纤维制成,总重量为7.3kg。

该复合刀具可同时加工三档大直径孔,为汽车零部件制造商节省了调试时间和加工时间, 同时最高的尺寸精度和表面质量。

同时加工三档直径,该主孔精加工刀具保证了平行度和同心度, 并显著缩短了加工节拍

即使在小功率机床上,轻型的3D打印刀具,也可以实现更快的换刀和启动速度

  

  

设计升级

左侧是第一代设计(9.5kg),最新的刀具设计(小于8kg)位于右侧, 更轻松换刀

  

流程模拟

  

  

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (379)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (379)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (379)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (379)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (379)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (379)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (379)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (379)
  • M Stainless Steel (378)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (378)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (378)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (378)
  • K Cast Iron (350)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (350)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (350)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (350)
  • N Non-Ferrous Materials (203)
    • N1
      Wrought Aluminum
      (203)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (203)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (203)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (179)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (134)
    • N6
      Carbon, Graphite Composites, CFRP
      (134)
    • N7
      MMC's
      (134)
  • S High-Temp Alloys (377)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (377)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (377)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (377)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (377)
  • H Hardened Materials (132)
    • H1
      Hardened Materials 44-48 HRC
      (132)
    • H2
      Hardened Materials 48-55 HRC
      (132)
    • H3
      Hardened Materials 56-60 HRC
      (132)
    • H4
      Hardened Materials >60 HRC
      (132)
Applications
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (225)
  • Blind Hole Finishing Blind Hole Finishing (324)
  • Grooving Grooving (1)
  • ID Thread Turning ID Thread Turning (1)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • Slot Milling Slot Milling (5)
  • Slot Side Slot Side (5)
  • Slot Square End Slot Square End (5)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (154)
  • Through Hole Finishing Through Hole Finishing (248)
Cutting Diameter
Cutting Diameter
  • 0.197 in (4)
  • 0.217 in (4)
  • 0.237 in (6)
  • 0.25 in (2)
  • 0.256 in (4)
  • 0.276 in (4)
  • 0.313 in (2)
  • 0.315 in (6)
  • 0.354 in (4)
  • 0.375 in (2)
  • 0.394 in (6)
  • 0.433 in (4)
  • 0.438 in (2)
  • 0.473 in (6)
  • 0.5 in (2)
  • 0.512 in (4)
  • 0.551 in (14)
  • 0.564 in (4)
  • 0.591 in (8)
  • 0.625 in (3)
  • 0.63 in (10)
  • 0.669 in (8)
  • 0.689 in (4)
  • 0.709 in (10)
  • 0.743 in (4)
  • 0.748 in (9)
  • 0.75 in (6)
  • 0.787 in (10)
  • 0.828 in (6)
  • 0.866 in (7)
  • 0.875 in (4)
  • 0.876 in (1)
  • 0.906 in (6)
  • 0.939 in (4)
  • 0.946 in (6)
  • 0.984 in (7)
  • 1.0 in (5)
  • 1.024 in (6)
  • 1.063 in (6)
  • 1.102 in (7)
  • 1.125 in (1)
  • 1.143 in (2)
  • 1.181 in (7)
  • 1.22 in (2)
  • 1.25 in (5)
  • 1.26 in (7)
  • 1.299 in (2)
  • 1.339 in (6)
  • 1.379 in (2)
  • 1.417 in (7)
  • 1.438 in (1)
  • 1.457 in (2)
  • 1.496 in (6)
  • 1.536 in (2)
  • 1.563 in (1)
  • 1.575 in (7)
  • 1.614 in (2)
  • 1.653 in (1)
  • 1.655 in (7)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.0 mm (4)
  • 5.5 mm (4)
  • 6.0 mm (6)
  • 6.351 mm (2)
  • 6.5 mm (4)
  • 7.0 mm (4)
  • 7.95 mm (2)
  • 8.0 mm (6)
  • 9.0 mm (4)
  • 9.525 mm (2)
  • 10.0 mm (6)
  • 11.0 mm (4)
  • 11.125 mm (2)
  • 12.0 mm (6)
  • 12.701 mm (2)
  • 13.0 mm (4)
  • 14.0 mm (14)
  • 14.3 mm (4)
  • 15.0 mm (8)
  • 15.875 mm (3)
  • 16.0 mm (10)
  • 17.0 mm (8)
  • 17.475 mm (4)
  • 18.0 mm (10)
  • 18.875 mm (4)
  • 19.0 mm (9)
  • 19.05 mm (6)
  • 20.0 mm (10)
  • 21.0 mm (6)
  • 22.0 mm (7)
  • 22.225 mm (4)
  • 22.25 mm (1)
  • 23.0 mm (6)
  • 23.826 mm (4)
  • 24.0 mm (6)
  • 25.0 mm (7)
  • 25.401 mm (5)
  • 26.0 mm (6)
  • 27.0 mm (6)
  • 28.0 mm (7)
  • 28.576 mm (1)
  • 29.0 mm (2)
  • 30.0 mm (7)
  • 31.0 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (7)
  • 33.0 mm (2)
  • 34.0 mm (6)
  • 35.0 mm (2)
  • 36.0 mm (7)
  • 36.525 mm (1)
  • 37.0 mm (2)
  • 38.0 mm (6)
  • 39.0 mm (2)
  • 39.7 mm (1)
  • 40.0 mm (7)
  • 41.0 mm (2)
  • 41.95 mm (1)
  • 42.0 mm (7)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (90)
  • Lightly Interrupted Cut (97)
  • Smooth Cut (97)
  • Varying Depth of Cut (97)
Reach
Reach
  • 0.968 in (1)
  • 1.01 in (1)
  • 1.045 in (1)
  • 1.969 in (1)
  • 2.045 in (1)
Reach Min to Reach Max
Reach
Reach
  • 24.576 mm (1)
  • 25.625 mm (1)
  • 26.55 mm (1)
  • 50.0 mm (1)
  • 51.95 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (66)
  • 91.0 (8)
  • 92.0 (23)
  • 93.0 (1)
  • 95.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • E-BORE Boring Bar (21)
  • Short Taper Reamer Shank (192)
  • Straight-Cylindrical (92)
  • Whistle Notch 2 (3)
  • Whistle Notch 2 Front (12)
Number of Flutes
Number of Flutes
  • 2 (4)
  • 3 (1)
  • 4 (54)
  • 6 (148)
  • 8 (80)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (72)
  • 1.0 (33)
  • 2.0 (28)
  • 3.0 (4)
  • 4.0 (26)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (1)
  • 0.008 in (1)
  • 0.016 in (3)
  • 0.02 in (2)
  • 0.038 in (38)
  • 0.05 in (2)
  • 0.051 in (2)
  • 0.1 in (136)
  • 0.102 in (10)
  • 0.178 in (2)
  • 0.18 in (2)
  • 0.2 in (132)
  • 0.203 in (124)
  • 0.38 in (2)
  • 0.381 in (2)
  • 0.397 in (125)
  • 0.4 in (132)
  • 0.794 in (21)
  • 0.8 in (132)
  • 1.2 in (10)
  • 1.6 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.038 mm (38)
  • 0.05 mm (2)
  • 0.051 mm (2)
  • 0.1 mm (137)
  • 0.102 mm (10)
  • 0.178 mm (2)
  • 0.18 mm (2)
  • 0.2 mm (133)
  • 0.203 mm (124)
  • 0.38 mm (2)
  • 0.381 mm (2)
  • 0.397 mm (125)
  • 0.4 mm (135)
  • 0.5 mm (2)
  • 0.794 mm (21)
  • 0.8 mm (132)
  • 1.2 mm (10)
  • 1.6 mm (3)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (141)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (141)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Lightly Interrupted Cut (1)
  • Smooth Cut (1)
  • Varying Depth of Cut (1)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK10 (39)
  • HK1500 (32)
  • HK35 (36)
  • HT2 (45)
  • HTX (44)
  • HWK15 (39)
  • K00379 (2)
  • K10M (42)
  • K10P (42)
  • K10U (38)
  • K110M (22)
  • K15U (38)
  • K20K (42)
  • K25M (35)
  • K313 (134)
  • K420 (2)
  • K605 (24)
  • K68 (132)
  • KB1345 (20)
  • KB1610 (127)
  • KB1630 (54)
  • KB5610 (125)
  • KB5625 (48)
  • KB5630 (47)
  • KB9610 (48)
  • KBH10 (38)
  • KBH20 (55)
  • KBHK10 (5)
  • KBHK15 (5)
  • KC250 (87)
  • KC5010 (134)
  • KC5025 (134)
  • KC525M (42)
  • KC5410 (132)
  • KC6005 (76)
  • KC6105 (17)
  • KC6305 (97)
  • KC710 (88)
  • KC720 (132)
  • KC725M (43)
  • KC730 (134)
  • KC7310 (86)
  • KC732 (132)
  • KC8050 (132)
  • KC810 (132)
  • KC850 (132)
  • KC9010 (125)
  • KC9025 (132)
  • KC910 (132)
  • KC9105 (132)
  • KC9110 (132)
  • KC9120 (125)
  • KC9125 (132)
  • KC9225 (132)
  • KC9240 (132)
  • KC9240NEW (132)
  • KC925M (42)
  • KC9315 (132)
  • KC9320 (132)
  • KC9325 (132)
  • KC935 (134)
  • KC950 (125)
  • KC990 (125)
  • KCD25 (132)
  • KCK05 (132)
  • KCK05B (38)
  • KCK15 (132)
  • KCK15B (132)
  • KCK20 (132)
  • KCK20B (132)
  • KCM15 (132)
  • KCM15B (131)
  • KCM25 (132)
  • KCM25B (132)
  • KCM35 (45)
  • KCM35B (4)
  • KCP05 (132)
  • KCP05B (3)
  • KCP10 (132)
  • KCP10B (132)
  • KCP25 (132)
  • KCP25B (132)
  • KCP30 (131)
  • KCP30B (10)
  • KCPK05 (86)
  • KCPK30 (42)
  • KCS10 (132)
  • KCS10B (132)
  • KCU05 (72)
  • KCU10 (139)
  • KCU25 (134)
  • KCU45 (7)
  • KD050 (124)
  • KD081 (40)
  • KD100 (88)
  • KD105 (86)
  • KD120 (86)
  • KD1400 (127)
  • KD1405 (86)
  • KD1415 (49)
  • KD1425 (127)
  • KT125 (87)
  • KT150 (87)
  • KT175 (124)
  • KT315 (134)
  • KT325 (45)
  • KT6215 (1)
  • KT6225 (1)
  • KT6315 (2)
  • KTP10 (125)
  • KU10 (125)
  • KU10T (132)
  • KU30T (132)
  • NL300 (7)
  • NL920 (7)
  • PB100 (29)
  • PB170 (36)
  • PB250 (36)
  • PB300 (29)
  • PD100 (39)
  • PD50 (36)
  • SP0PW3 (7)
  • SP4019 (49)
  • SPM5F2 (2)
  • SPMQMA (10)
  • SPN3W1 (3)
  • THM (39)
  • THM-X (32)
  • TN1000 (29)
  • TN10P (39)
  • TN10U (39)
  • TN15M (39)
  • TN15U (32)
  • TN2000 (39)
  • TN20K (39)
  • TN20P (39)
  • TN30M (39)
  • TN4000 (32)
  • TN5015 (39)
  • TN5020 (39)
  • TN5105 (39)
  • TN5120 (39)
  • TN6010 (10)
  • TN6025 (3)
  • TN7005 (3)
  • TN7010 (39)
  • TN7015 (39)
  • TN7025 (39)
  • TN7035 (39)
  • TN7105 (39)
  • TN7110 (39)
  • TN7115 (39)
  • TN7125 (39)
  • TN7135 (39)
  • TN8025 (39)
  • TTI15 (32)
  • TTM (3)
  • TTR (39)
  • TTS (32)
  • TTX (3)
  • W00342 (7)
  • WBH10C (32)
  • WBH10P (32)
  • WBH10U (32)
  • WBH20P (10)
  • WBH25P (32)
  • WBH30P (3)
  • WBK45U (10)
  • WDN00U (32)
  • WDN25U (32)
  • WK05CT (39)
  • WK15CT (39)
  • WK20CT (39)
  • WM15CT (39)
  • WM25CT (39)
  • WP15CT (39)
  • WP20TT (29)
  • WP25CT (39)
  • WP35CT (10)
  • WS10PT (39)
  • WS25PT (32)
  • WU05PT (39)
  • WU10HT (39)
  • WU10PR (4)
  • WU10PT (32)
  • WU20HT (29)
  • WU25PT (32)
  • YY3A00 (1)
Hand Of Tool
Hand Of Tool
  • R (320)
Wiper Insert
Wiper Insert
  • N (104)
  • Y (26)
Helix Hand
Helix Hand
  • L (118)
  • N (163)
  • R (1)
Lead in Length
Lead in Length
  • 0.2 mm (45)
  • 0.301 mm (6)
  • 0.4 mm (10)
  • 0.5 mm (102)
  • 0.75 mm (6)
  • 0.951 mm (10)
  • 1.1 mm (95)
  • 1.151 mm (8)
Lead in Length Min to Lead in Length Max
Lead In Length
Lead In Length
  • 0.0 in (51)
  • 0.001 in (118)
  • 0.002 in (113)
Lead In Length Min to Lead In Length Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 2.0 mm (1)
  • 4.0 mm (1)
  • 6.0 mm (4)
  • 8.0 mm (2)
  • 8.5 mm (2)
  • 10.0 mm (4)
  • 11.0 mm (2)
  • 12.0 mm (3)
  • 13.5 mm (2)
  • 14.0 mm (4)
  • 15.0 mm (1)
  • 16.0 mm (4)
  • 19.0 mm (1)
  • 19.5 mm (1)
  • 20.0 mm (1)
  • 22.0 mm (1)
  • 22.5 mm (1)
  • 24.5 mm (1)
  • 25.0 mm (3)
  • 25.5 mm (2)
  • 29.0 mm (2)
  • 29.5 mm (2)
  • 33.5 mm (1)
  • 34.0 mm (2)
  • 36.0 mm (2)
  • 40.0 mm (1)
  • 40.5 mm (1)
  • 42.0 mm (1)
  • 43.0 mm (2)
  • 45.5 mm (1)
  • 47.0 mm (1)
  • 49.0 mm (1)
  • 50.0 mm (1)
  • 52.0 mm (2)
  • 53.0 mm (1)
  • 56.5 mm (1)
  • 60.0 mm (2)
  • 61.0 mm (1)
  • 65.0 mm (3)
  • 68.0 mm (1)
  • 76.0 mm (1)
  • 82.0 mm (1)
  • 97.0 mm (1)
  • 100.0 mm (2)
  • 103.5 mm (1)
  • 110.0 mm (1)
  • 125.0 mm (1)
  • 138.0 mm (3)
  • 200.0 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.079 in (1)
  • 0.157 in (1)
  • 0.237 in (4)
  • 0.315 in (2)
  • 0.335 in (2)
  • 0.394 in (4)
  • 0.433 in (2)
  • 0.473 in (3)
  • 0.531 in (2)
  • 0.551 in (4)
  • 0.591 in (1)
  • 0.63 in (4)
  • 0.748 in (1)
  • 0.768 in (1)
  • 0.787 in (1)
  • 0.866 in (1)
  • 0.886 in (1)
  • 0.965 in (1)
  • 0.984 in (3)
  • 1.004 in (2)
  • 1.143 in (2)
  • 1.161 in (2)
  • 1.319 in (1)
  • 1.339 in (2)
  • 1.417 in (2)
  • 1.575 in (1)
  • 1.594 in (1)
  • 1.655 in (1)
  • 1.693 in (2)
  • 1.792 in (1)
  • 1.85 in (1)
  • 1.929 in (1)
  • 1.969 in (1)
  • 2.047 in (2)
  • 2.087 in (1)
  • 2.224 in (1)
  • 2.362 in (2)
  • 2.402 in (1)
  • 2.559 in (3)
  • 2.677 in (1)
  • 2.992 in (1)
  • 3.228 in (1)
  • 3.819 in (1)
  • 3.938 in (2)
  • 4.075 in (1)
  • 4.331 in (1)
  • 4.921 in (1)
  • 5.433 in (3)
  • 7.875 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.276 in (1)
  • 0.315 in (2)
  • 0.354 in (1)
  • 0.374 in (1)
  • 0.394 in (2)
  • 0.453 in (1)
  • 0.473 in (5)
  • 0.551 in (4)
  • 0.572 in (1)
  • 0.63 in (4)
  • 0.65 in (1)
  • 0.669 in (1)
  • 0.768 in (1)
  • 0.787 in (4)
  • 0.886 in (1)
  • 0.906 in (1)
  • 0.984 in (1)
  • 1.004 in (1)
  • 1.024 in (1)
  • 1.181 in (2)
  • 1.319 in (1)
  • 1.457 in (2)
  • 1.614 in (1)
  • 1.713 in (1)
  • 1.732 in (1)
  • 2.087 in (1)
  • 2.126 in (1)
  • 2.283 in (1)
  • 2.559 in (1)
  • 2.598 in (2)
  • 3.031 in (1)
  • 3.269 in (1)
  • 3.938 in (1)
  • 4.016 in (1)
  • 4.055 in (1)
  • 5.118 in (1)
  • 5.984 in (1)
  • 8.071 in (2)
  • 40.158 in (2)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 7.0 mm (1)
  • 8.0 mm (2)
  • 9.0 mm (1)
  • 9.5 mm (1)
  • 10.0 mm (2)
  • 11.5 mm (1)
  • 12.0 mm (5)
  • 14.0 mm (4)
  • 14.5 mm (1)
  • 16.0 mm (4)
  • 16.5 mm (1)
  • 17.0 mm (1)
  • 19.5 mm (1)
  • 20.0 mm (4)
  • 22.5 mm (1)
  • 23.0 mm (1)
  • 25.0 mm (1)
  • 25.5 mm (1)
  • 26.0 mm (1)
  • 30.0 mm (2)
  • 33.5 mm (1)
  • 37.0 mm (2)
  • 41.0 mm (1)
  • 43.5 mm (1)
  • 44.0 mm (1)
  • 53.0 mm (1)
  • 54.0 mm (1)
  • 58.0 mm (1)
  • 65.0 mm (1)
  • 66.0 mm (2)
  • 77.0 mm (1)
  • 83.0 mm (1)
  • 100.0 mm (1)
  • 102.0 mm (1)
  • 103.0 mm (1)
  • 130.0 mm (1)
  • 152.0 mm (1)
  • 205.0 mm (2)
  • 1020.0 mm (2)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max