successfully added to cart
View Cart
Read More

切槽和切断

Beyond™ Evolution™

一款新型单刃切槽及切断刀具产品,还可用于多功能车削应用。Beyond™ Evolution™ 新型专利 V 型刀座设计,可减少振刀。可以确保稳定的加工性能,

V 型刀片安装刀座设计
在切槽、切断,以及多功能车削应用中具有极佳的负载稳定性。

顶部及底部 V 型设计
精确安全的刀片定位可以增提高加刚性,提高尺寸精度。

Part of FirstChoice Products

所有产品均为 First Choice 计划的组成部分。

易于选择,易于订购,易于应用,卓越性能。 进一步了解 First Choice。

断屑槽功能

断屑槽功能

在切槽、切断,以及多功能车削加工中提高切屑控制性能。

风扇效应

三 V 型设计

1 V 型后端定位设计 - 在切槽、切断,以及多功能车削应用中具有极佳的负载稳定性。

2 顶部及底部 V 型设计 - 精确安全的刀片定位可以增提高加刚性,提高尺寸精度。

风扇效应

风扇效应

冷却剂可经刀片顶部直接精确输送至切屑下的切削区域,防止出现高温。

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (352)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (352)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (352)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (352)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (352)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (352)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (352)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (352)
  • M Stainless Steel (304)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (304)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (304)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (304)
  • K Cast Iron (352)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (352)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (352)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (352)
  • N Non-Ferrous Materials (313)
    • N1
      Wrought Aluminum
      (313)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (304)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (313)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (304)
    • N6
      Carbon, Graphite Composites, CFRP
      (304)
  • S High-Temp Alloys (313)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (313)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (313)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (313)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (313)
  • H Hardened Materials (268)
    • H1
      Hardened Materials 44-48 HRC
      (268)
    • H2
      Hardened Materials 48-55 HRC
      (268)
Select First Choice
  • CN (69)
  • DE (69)
  • GB (39)
  • IN (3)
  • US (102)
Applications
Applications
  • Back Boring Back Boring (44)
  • CRT Profiling CRT Profiling (1)
  • Cut-Off Cut-Off (182)
  • Deep Grooving Deep Grooving (1)
  • Face Grooving Face Grooving (79)
  • Facing Facing (59)
  • Grooving Grooving (351)
  • ID Facing ID Facing (56)
  • ID Grooving ID Grooving (144)
  • Multiple Direction Cutting Multiple Direction Cutting (53)
  • Plunge Turning Plunge Turning (136)
  • Profiling Profiling (51)
  • Turning Turning (99)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (281)
  • Lightly Interrupted Cut (327)
  • Smooth Cut (361)
  • Varying Depth of Cut (328)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (234)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (52)
  • Toolholder (148)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (327)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.2 mm (144)
  • 0.203 mm (38)
  • 0.3 mm (64)
  • 0.4 mm (160)
  • 0.79 mm (40)
  • 0.794 mm (40)
  • 0.8 mm (123)
  • 1.0 mm (54)
  • 1.06 mm (59)
  • 1.18 mm (18)
  • 1.19 mm (83)
  • 1.2 mm (26)
  • 1.5 mm (41)
  • 1.56 mm (47)
  • 1.59 mm (44)
  • 1.65 mm (45)
  • 2.0 mm (43)
  • 2.06 mm (49)
  • 2.37 mm (43)
  • 2.38 mm (43)
  • 2.44 mm (48)
  • 2.5 mm (35)
  • 2.56 mm (41)
  • 3.0 mm (35)
  • 3.06 mm (41)
  • 3.17 mm (40)
  • 3.24 mm (37)
  • 3.96 mm (25)
  • 4.0 mm (21)
  • 4.03 mm (23)
  • 4.06 mm (27)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.005 in (52)
  • 0.0076 in (38)
  • 0.0079 in (38)
  • 0.008 in (144)
  • 0.012 in (64)
  • 0.0156 in (78)
  • 0.0157 in (102)
  • 0.0158 in (40)
  • 0.016 in (160)
  • 0.03 in (33)
  • 0.031 in (122)
  • 0.0313 in (40)
  • 0.0315 in (72)
  • 0.032 in (104)
  • 0.039 in (54)
  • 0.042 in (59)
  • 0.046 in (18)
  • 0.047 in (83)
  • 0.059 in (41)
  • 0.062 in (50)
  • 0.063 in (41)
  • 0.065 in (45)
  • 0.079 in (43)
  • 0.081 in (49)
  • 0.093 in (43)
  • 0.094 in (43)
  • 0.096 in (48)
  • 0.098 in (35)
  • 0.101 in (41)
  • 0.118 in (35)
  • 0.121 in (41)
  • 0.125 in (40)
  • 0.127 in (34)
  • 0.128 in (35)
  • 0.156 in (25)
  • 0.157 in (21)
  • 0.158 in (21)
  • 0.159 in (20)
  • 0.16 in (27)
  • 0.787 in (52)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (161)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (161)
Corner Chamfer Min to Corner Chamfer Max
application
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (47)
  • Lightly Interrupted Cut (93)
  • Smooth Cut (127)
  • Varying Depth of Cut (94)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (243)
  • KCK20B (243)
  • KCM35B (162)
  • KCP10B (251)
  • KCP25B (256)
  • KCU10 (268)
  • KCU25 (270)
Hand Of Tool
Hand Of Tool
  • L (100)
  • R (100)
Wiper Insert
Wiper Insert
  • N (327)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.625 in (4)
  • 0.63 in (4)
  • 0.787 in (12)
  • 0.984 in (10)
  • 1.0 in (2)
  • 1.25 in (6)
  • 1.26 in (6)
  • 1.5 in (4)
  • 1.575 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 15.88 mm (4)
  • 16.0 mm (4)
  • 20.0 mm (12)
  • 25.0 mm (10)
  • 25.4 mm (2)
  • 31.75 mm (6)
  • 32.0 mm (6)
  • 38.1 mm (4)
  • 40.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Countersunk Angle
Countersunk Angle
  • 17.5 (1)
Countersunk Angle Min to Countersunk Angle Max
Cutting Direction
Cutting Direction
  • E (169)
  • S (31)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (34)
  • NEUTRAL (ZERO) (18)
  • POSITIVE-ZERO (40)
Maximum Bore Depth
Maximum Bore Depth
  • 24.0 mm (4)
  • 25.4 mm (4)
  • 31.75 mm (6)
  • 32.0 mm (4)
  • 38.1 mm (6)
  • 40.0 mm (4)
  • 40.28 mm (2)
  • 40.3 mm (2)
  • 50.0 mm (2)
  • 50.3 mm (4)
  • 50.8 mm (7)
  • 63.4 mm (2)
  • 63.5 mm (1)
  • 64.0 mm (3)
  • 64.01 mm (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 0.945 in (4)
  • 1.0 in (4)
  • 1.25 in (6)
  • 1.259 in (2)
  • 1.26 in (2)
  • 1.5 in (6)
  • 1.575 in (4)
  • 1.586 in (2)
  • 1.59 in (2)
  • 1.969 in (2)
  • 1.98 in (4)
  • 2.0 in (7)
  • 2.496 in (2)
  • 2.5 in (1)
  • 2.519 in (1)
  • 2.52 in (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (28)
frontEnd
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (76)
Clamp Style
Clamp Style
  • Y (214)
Cutting Width
Cutting Width
  • 1.6 mm (14)
  • 2.0 mm (54)
  • 2.12 mm (59)
  • 2.125 mm (52)
  • 2.387 mm (57)
  • 2.388 mm (52)
  • 2.51 mm (52)
  • 2.511 mm (52)
  • 3.0 mm (41)
  • 3.125 mm (47)
  • 3.175 mm (41)
  • 3.177 mm (41)
  • 3.3 mm (41)
  • 3.301 mm (38)
  • 3.302 mm (42)
  • 4.0 mm (43)
  • 4.094 mm (38)
  • 4.125 mm (49)
  • 4.75 mm (43)
  • 4.76 mm (40)
  • 4.762 mm (43)
  • 4.763 mm (40)
  • 4.873 mm (44)
  • 4.877 mm (40)
  • 4.878 mm (44)
  • 5.0 mm (35)
  • 5.125 mm (41)
  • 6.0 mm (35)
  • 6.125 mm (41)
  • 6.346 mm (37)
  • 6.35 mm (35)
  • 6.473 mm (34)
  • 6.477 mm (32)
  • 6.478 mm (35)
  • 7.0 mm (32)
  • 7.125 mm (32)
  • 7.317 mm (33)
  • 7.92 mm (21)
  • 7.925 mm (22)
  • 8.0 mm (21)
  • 8.051 mm (18)
  • 8.052 mm (23)
  • 8.125 mm (27)
  • 9.525 mm (8)
  • 9.651 mm (8)
  • 10.0 mm (8)
  • 10.125 mm (8)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.063 in (14)
  • 0.0787 in (52)
  • 0.0788 in (52)
  • 0.079 in (54)
  • 0.083 in (56)
  • 0.084 in (55)
  • 0.094 in (57)
  • 0.099 in (52)
  • 0.118 in (41)
  • 0.1181 in (38)
  • 0.123 in (47)
  • 0.125 in (44)
  • 0.13 in (45)
  • 0.157 in (43)
  • 0.1574 in (40)
  • 0.1575 in (40)
  • 0.158 in (40)
  • 0.161 in (38)
  • 0.162 in (49)
  • 0.187 in (46)
  • 0.1875 in (40)
  • 0.192 in (48)
  • 0.1968 in (32)
  • 0.197 in (35)
  • 0.202 in (41)
  • 0.236 in (35)
  • 0.2362 in (32)
  • 0.241 in (41)
  • 0.25 in (40)
  • 0.255 in (37)
  • 0.276 in (32)
  • 0.281 in (32)
  • 0.2881 in (33)
  • 0.312 in (25)
  • 0.315 in (21)
  • 0.317 in (23)
  • 0.3199 in (18)
  • 0.32 in (27)
  • 0.375 in (8)
  • 0.38 in (8)
  • 0.394 in (8)
  • 0.399 in (8)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • MCS - Modular Cartridge System (76)
Insert Shape
Insert Shape
  • PRISMATIC (361)
Cartridge Size
Cartridge Size
  • 50 (28)
  • 65 (6)
Front End Style
Front End Style
  • MCS01 Modular Deep Grooving (76)
Insert Size
Insert Size
  • 10 (8)
  • 1F (12)
  • 2 (48)
  • 3 (32)
  • 4 (32)
  • 5 (24)
  • 6 (28)
  • 8 (16)
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.0 mm (8)
  • 7.0 mm (24)
  • 10.0 mm (12)
  • 12.0 mm (18)
  • 16.0 mm (60)
  • 22.0 mm (27)
  • 26.0 mm (49)
  • 32.0 mm (24)
  • 40.0 mm (12)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.197 in (8)
  • 0.276 in (24)
  • 0.394 in (12)
  • 0.472 in (14)
  • 0.473 in (4)
  • 0.63 in (60)
  • 0.866 in (27)
  • 1.0236 in (1)
  • 1.024 in (48)
  • 1.26 in (24)
  • 1.575 in (12)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 28.0000 mm (2)
  • 33.0000 mm (2)
  • 38.0000 mm (2)
  • 43.0000 mm (2)
  • 47.0000 mm (6)
  • 48.0000 mm (6)
  • 49.0000 mm (4)
  • 53.5000 mm (4)
  • 55.5000 mm (2)
  • 57.0000 mm (6)
  • 58.0000 mm (6)
  • 58.5000 mm (6)
  • 60.5000 mm (2)
  • 63.5000 mm (12)
  • 65.5000 mm (2)
  • 66.5000 mm (4)
  • 68.5000 mm (4)
  • 73.5000 mm (4)
  • 138.1500 mm (2)
  • 138.7500 mm (2)
  • 139.2500 mm (2)
  • 139.9000 mm (6)
  • 140.4000 mm (6)
  • 140.5500 mm (4)
  • 150.0000 mm (2)
  • 152.4000 mm (4)
  • 158.1500 mm (2)
  • 158.7500 mm (2)
  • 159.2500 mm (2)
  • 165.9500 mm (2)
  • 170.0000 mm (2)
  • 177.8000 mm (2)
Gage Length
Gage Length
  • 1.1020 in (2)
  • 1.2990 in (2)
  • 1.4960 in (2)
  • 1.6930 in (2)
  • 1.8500 in (6)
  • 1.8900 in (6)
  • 1.9290 in (4)
  • 2.1060 in (4)
  • 2.1850 in (2)
  • 2.2440 in (6)
  • 2.2830 in (6)
  • 2.3030 in (6)
  • 2.3820 in (2)
  • 2.5000 in (12)
  • 2.5790 in (2)
  • 2.6180 in (4)
  • 2.6970 in (4)
  • 2.8940 in (4)
  • 5.4390 in (2)
  • 5.4630 in (2)
  • 5.4820 in (2)
  • 5.5080 in (6)
  • 5.5280 in (6)
  • 5.5330 in (4)
  • 5.9060 in (2)
  • 6.0000 in (4)
  • 6.2260 in (2)
  • 6.2500 in (2)
  • 6.2700 in (2)
  • 6.5330 in (2)
  • 6.6930 in (2)
  • 7.0000 in (2)
insertGeometry
Shape
Shape
  • PRISMATIC (127)
Insert Seat Size
Insert Seat Size
  • 2 (14)
  • 3 (25)
  • 4 (26)
  • 5 (12)
  • 6 (26)
  • 8 (24)
Cutting Edge Length
Cutting Edge Length
  • 10.638 in (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.419 mm (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Tool Material
Cutting Tool Material
  • H W (361)
backEnd
Connection Type
Connection Type
  • BORING BAR (52)
  • SQUARE SHANK (148)
System Size
System Size
  • KM40TS (4)
  • KM4X63 (4)
  • KM50TS (8)
  • KM63TS (8)
  • KM63XMZ (8)
  • KM80ATC (8)
  • KM80TS (8)
  • PSC40 (4)
  • PSC50 (8)
  • PSC63 (8)
  • PSC80 (8)
Back-End Diameter
Back-End Diameter
  • 0.47 in (2)
  • 0.472 in (2)
  • 0.5 in (4)
  • 0.625 in (6)
  • 0.629 in (2)
  • 0.63 in (4)
  • 0.75 in (6)
  • 0.787 in (2)
  • 0.79 in (4)
  • 0.98 in (2)
  • 0.984 in (4)
  • 1.0 in (6)
  • 1.25 in (4)
  • 1.259 in (2)
  • 1.26 in (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 12.0 mm (4)
  • 12.7 mm (4)
  • 15.87 mm (4)
  • 15.875 mm (2)
  • 16.0 mm (6)
  • 19.05 mm (6)
  • 20.0 mm (6)
  • 25.0 mm (6)
  • 25.4 mm (6)
  • 31.7 mm (1)
  • 31.75 mm (3)
  • 32.0 mm (4)
Back-End Diameter Min to Back-End Diameter Max
hidden
Category Path
Category Path
other
Grade
Grade
  • K313 (9)
  • KCK20B (9)
  • KCP10B (17)
  • KCP25B (22)
  • KCU10 (34)
  • KCU25 (36)
Platform
Platform
  • Beyond Evolution (493)
  • KM50 (1)
  • KM63 (2)
  • updated (1)
Tool Unit
Tool Unit
  • I (237)
  • M (387)
kmtConfigurable
kmtConfigurable
  • false (468)
  • true (29)
Drilling Condition Material
Drilling Condition Material
  • H-All (34)
  • K-All (127)
  • M-All (79)
  • N-All (88)
  • P-All (127)
  • S-All (88)
Cutting Condition Material
Cutting Condition Material
  • H-All (268)
  • K-All (361)
  • M-All (313)
  • N-All (322)
  • P-All (361)
  • S-All (322)
Insert Hand
Insert Hand
  • L (180)
  • N (361)
  • R (180)
Over All Length [L]
Over All Length [L]
  • 47.75 mm (10)
  • 49.62 mm (4)
  • 51.75 mm (8)
  • 57.75 mm (3)
  • 61.746 mm (1)
  • 61.75 mm (4)
  • 65.62 mm (2)
  • 67.75 mm (2)
  • 114.3 mm (24)
  • 125.0 mm (32)
  • 135.299 mm (2)
  • 135.855 mm (2)
  • 136.449 mm (4)
  • 137.004 mm (4)
  • 138.75 mm (2)
  • 139.9 mm (6)
  • 150.0 mm (42)
  • 150.25 mm (2)
  • 151.4 mm (6)
  • 152.4 mm (52)
  • 155.299 mm (2)
  • 155.855 mm (2)
  • 158.75 mm (2)
  • 161.852 mm (2)
  • 162.404 mm (2)
  • 170.0 mm (22)
  • 170.25 mm (2)
  • 177.8 mm (10)
  • 180.0 mm (12)
  • 200.0 mm (18)
  • 250.0 mm (8)
Over All Length [L] Min to Over All Length [L] Max