HTS System • Adjustable Heads with DFT Inserts

フィルタを選択
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (90)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (90)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (90)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (90)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (90)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (90)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (90)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (90)
  • M Stainless Steel (90)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (90)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (90)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (90)
  • K Cast Iron (90)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (90)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (90)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (90)
  • N Non-Ferrous Materials (90)
    • N1
      Wrought Aluminum (90)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (90)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (90)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (90)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (90)
    • N6
      Carbon, Graphite Composites, CFRP (90)
    • N7
      MMC's (90)
  • S High-Temp Alloys (90)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (90)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (90)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (90)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (90)
  • H Hardened Materials (72)
    • H1
      Hardened Materials 44-48 HRC (72)
    • H2
      Hardened Materials 48-55 HRC (72)
    • H3
      Hardened Materials 56-60 HRC (72)
    • H4
      Hardened Materials >60 HRC (72)
Applications
Applications
  • Convex Drilling Convex Drilling (1)
  • Drilling Drilling (46)
Cutting Diameter
Cutting Diameter
  • 0.315 in (3)
  • 0.394 in (3)
  • 0.591 in (3)
  • 0.787 in (3)
  • 0.984 in (3)
  • 1.181 in (3)
  • 1.772 in (1)
  • 1.969 in (1)
  • 2.165 in (1)
  • 2.283 in (1)
  • 2.48 in (2)
  • 2.677 in (1)
  • 2.874 in (1)
  • 3.071 in (2)
  • 3.307 in (1)
  • 3.543 in (1)
  • 3.781 in (2)
  • 4.016 in (1)
  • 4.252 in (1)
  • 4.529 in (1)
  • 4.803 in (1)
  • 5.118 in (1)
  • 5.513 in (1)
  • 5.906 in (1)
  • 6.22 in (1)
  • 6.378 in (1)
  • 7.087 in (1)
  • 7.678 in (1)
  • 8.387 in (1)
  • 9.055 in (1)
  • 10.236 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 8.0 mm (3)
  • 10.0 mm (3)
  • 15.0 mm (3)
  • 20.0 mm (3)
  • 25.0 mm (3)
  • 30.0 mm (3)
  • 45.0 mm (1)
  • 50.0 mm (1)
  • 55.0 mm (1)
  • 58.0 mm (1)
  • 63.0 mm (2)
  • 68.0 mm (1)
  • 73.0 mm (1)
  • 78.0 mm (2)
  • 84.0 mm (1)
  • 90.0 mm (1)
  • 96.0 mm (2)
  • 102.0 mm (1)
  • 108.0 mm (1)
  • 115.0 mm (1)
  • 122.0 mm (1)
  • 130.0 mm (1)
  • 140.0 mm (1)
  • 150.0 mm (1)
  • 158.0 mm (1)
  • 162.0 mm (1)
  • 180.0 mm (1)
  • 195.0 mm (1)
  • 213.0 mm (1)
  • 230.0 mm (1)
  • 260.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (44)
  • Stable (44)
  • Unstable (44)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 500.0 mm (1)
  • 550.0 mm (1)
  • 580.0 mm (1)
  • 630.0 mm (1)
  • 680.0 mm (2)
  • 750.0 mm (7)
  • 780.0 mm (3)
  • 1000.0 mm (5)
  • 1060.0 mm (3)
  • 1360.0 mm (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 19.685 in (1)
  • 21.654 in (1)
  • 22.835 in (1)
  • 24.803 in (1)
  • 26.773 in (2)
  • 29.529 in (7)
  • 30.709 in (3)
  • 39.37 in (5)
  • 41.732 in (3)
  • 53.543 in (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.37 in (1)
  • 0.445 in (1)
  • 0.681 in (1)
  • 0.906 in (1)
  • 1.143 in (1)
  • 1.417 in (1)
Reach Min to Reach Max
Reach
Reach
  • 9.4 mm (1)
  • 11.3 mm (1)
  • 17.3 mm (1)
  • 23.0 mm (1)
  • 29.0 mm (1)
  • 36.0 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • -8888.0 (28)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • HTS (28)
  • HTS Pilot Drill Shank (18)
Number of Flutes
Number of Flutes
  • 2 (46)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.079 in (1)
  • 1.496 in (1)
  • 1.752 in (1)
  • 2.008 in (1)
  • 2.265 in (1)
  • 2.717 in (1)
  • 3.346 in (2)
  • 3.938 in (3)
  • 4.529 in (4)
  • 4.724 in (4)
  • 5.118 in (3)
  • 5.71 in (3)
  • 6.299 in (4)
  • 7.283 in (2)
  • 7.875 in (1)
  • 9.055 in (2)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 27.401 mm (1)
  • 38.0 mm (1)
  • 44.5 mm (1)
  • 51.0 mm (1)
  • 57.5 mm (1)
  • 69.0 mm (1)
  • 85.0 mm (2)
  • 100.0 mm (3)
  • 115.0 mm (4)
  • 120.0 mm (4)
  • 130.0 mm (3)
  • 145.0 mm (3)
  • 160.0 mm (4)
  • 185.0 mm (2)
  • 200.0 mm (1)
  • 230.0 mm (2)
Over All Length [L] Min to Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (4)
  • 0.012 in (4)
  • 0.016 in (50)
  • 0.024 in (4)
  • 0.031 in (66)
  • 0.039 in (35)
  • 0.047 in (44)
  • 0.063 in (40)
  • 0.079 in (19)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (4)
  • 0.301 mm (4)
  • 0.4 mm (50)
  • 0.601 mm (4)
  • 0.8 mm (66)
  • 1.0 mm (35)
  • 1.201 mm (44)
  • 1.6 mm (40)
  • 2.0 mm (19)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (44)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (44)
Corner Chamfer Min to Corner Chamfer Max
application
Coating
Coating
  • TiN (12)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • A30 (6)
  • AS3 (6)
  • CD4 (44)
  • CM4 (35)
  • CS5 (72)
  • K6 (10)
  • KC7140 (72)
  • KC720 (72)
  • KC7210 (35)
  • KC7215 (72)
  • KC7225 (72)
  • KC7315 (6)
  • KC7815 (72)
  • KC7820 (62)
  • KC7845 (10)
  • KC7935 (72)
  • KC810 (72)
  • KC990 (72)
  • KCMS35 (72)
  • KCPK10 (72)
  • KCU25 (72)
  • KCU40 (72)
  • KD1425 (72)
  • KM1 (44)
  • KMF (72)
  • KU40D (72)
Hand Of Tool
Hand Of Tool
  • R (46)
Drill Type
Drill Type
  • 81-06 (18)
  • 86-01 (28)
frontEnd
Insert Shape
Insert Shape
  • S-SQUARE 90 (44)
  • W-TRIGON 80 (28)
  • X-TRIGON 84 (44)
Point Angle
Point Angle
  • 118.0 (46)
Point Angle Min to Point Angle Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • D P (44)
  • H W (44)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (18)
  • HTS SHANK (28)
Back-End Diameter
Back-End Diameter
  • 8.0 mm (3)
  • 10.0 mm (3)
  • 13.0 mm (2)
  • 15.0 mm (3)
  • 16.0 mm (3)
  • 20.0 mm (3)
  • 22.0 mm (4)
  • 25.0 mm (3)
  • 27.0 mm (4)
  • 30.0 mm (3)
  • 32.0 mm (3)
  • 40.0 mm (3)
  • 50.0 mm (4)
  • 60.0 mm (3)
  • 80.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.315 in (3)
  • 0.394 in (3)
  • 0.512 in (2)
  • 0.591 in (3)
  • 0.63 in (3)
  • 0.787 in (3)
  • 0.866 in (4)
  • 0.984 in (3)
  • 1.063 in (4)
  • 1.181 in (3)
  • 1.26 in (3)
  • 1.575 in (3)
  • 1.969 in (4)
  • 2.362 in (3)
  • 3.15 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
マイソリューションページにを追加しようとしています. 続行しますか?
product-image
Please adjust the following properties from

ISO製品型番

ANSI製品型番

to find similar products.

The following files are available

Please select a file to download

Models

Product data

ダッシュボード情報を表示するには、ログインする必要があります
Session expired due to inactivity, please login again
カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
アイテムがカートに正常に追加されました
カートを表示

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO製品型番 材種    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?