ようこそ
設定をご確認ください
設定の更新

提案製品

Product Family suggestions

ケナメタルにお任せ

製品特有のご質問がありますか？

専門分野別のグローバルサービス担当の全リストを見る

クイックオーダー
品目 がカートに正常に追加されました
カートの表示

ねじ切り加工

フィルタを選択
Filters
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1196)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1196)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1196)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (1196)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (1196)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (1196)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (1196)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (1196)
  • M Stainless Steel (1196)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (1196)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (1196)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (1196)
  • K Cast Iron (1182)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (1182)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (1182)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (1182)
  • N Non-Ferrous Materials (480)
    • N1
      Wrought Aluminum (480)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (453)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (450)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (479)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (453)
    • N6
      Carbon, Graphite Composites, CFRP (453)
    • N7
      MMC's (449)
  • S High-Temp Alloys (1227)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (1227)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (1227)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (1227)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (1227)
  • H Hardened Materials (449)
    • H1
      Hardened Materials 44-48 HRC (449)
    • H2
      Hardened Materials 48-55 HRC (178)
    • H3
      Hardened Materials 56-60 HRC (102)
    • H4
      Hardened Materials >60 HRC (102)
第1選択を選択
  • DE (63)
  • GB (41)
  • SG (36)
Applications
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Face Grooving Face Grooving (191)
  • Facing Facing (4)
  • Grooving Grooving (134)
  • ID Grooving ID Grooving (69)
  • ID Thread Turning ID Thread Turning (682)
  • Multiple Direction Cutting Multiple Direction Cutting (4)
  • OD Thread Turning OD Thread Turning (925)
  • Plunge Turning Plunge Turning (4)
  • Profiling Profiling (4)
  • Threading Threading (205)
  • Turning Turning (4)
Type of Thread
Type of Thread
  • 55 (136)
  • 60 (449)
  • ACME (316)
  • API (163)
  • API BUTTRESS (38)
  • API RD (162)
  • BSPT (95)
  • BSW (231)
  • BUTTRESS (209)
  • M (324)
  • NPT (185)
  • NPTF (95)
  • RD DIN 405 (116)
  • STUB ACME (226)
  • TR DIN 103 (120)
  • UN (508)
  • UNJ (270)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (197)
  • Lightly Interrupted Cut (197)
  • Smooth Cut (197)
  • Varying Depth of Cut (197)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (325)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (7)
  • Boring Bar Shank (115)
  • KM (17)
  • Toolholder (147)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (190)
  • 2.0 (728)
  • 3.0 (492)
  • 4.0 (5)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.181 in (17)
  • 1.625 in (7)
  • 2.165 in (1)
  • 2.192 in (1)
  • 2.362 in (1)
  • 2.5 in (4)
  • 2.757 in (2)
  • 3.15 in (2)
  • 3.25 in (2)
  • 3.346 in (2)
  • 3.5 in (4)
  • 3.938 in (10)
  • 4.0 in (3)
  • 4.5 in (14)
  • 4.921 in (14)
  • 5.0 in (25)
  • 5.906 in (32)
  • 5.984 in (2)
  • 5.996 in (1)
  • 6.0 in (52)
  • 6.024 in (1)
  • 6.063 in (2)
  • 6.102 in (3)
  • 6.694 in (15)
  • 6.891 in (4)
  • 7.0 in (11)
  • 7.008 in (2)
  • 7.079 in (2)
  • 7.087 in (11)
  • 7.875 in (9)
  • 7.931 in (1)
  • 7.976 in (1)
  • 8.0 in (7)
  • 8.058 in (2)
  • 8.082 in (1)
  • 9.843 in (8)
  • 9.879 in (1)
  • 10.0 in (18)
  • 11.811 in (6)
  • 12.0 in (8)
  • 13.781 in (1)
  • 14.0 in (7)
  • 16.0 in (8)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 30.0 mm (17)
  • 41.276 mm (7)
  • 55.0 mm (1)
  • 55.676 mm (1)
  • 60.0 mm (1)
  • 63.5 mm (4)
  • 70.0 mm (2)
  • 80.0 mm (2)
  • 82.551 mm (2)
  • 85.0 mm (2)
  • 88.9 mm (4)
  • 100.0 mm (10)
  • 101.601 mm (3)
  • 114.301 mm (14)
  • 125.0 mm (14)
  • 127.0 mm (25)
  • 150.0 mm (32)
  • 152.0 mm (2)
  • 152.3 mm (1)
  • 152.4 mm (52)
  • 153.0 mm (1)
  • 154.0 mm (2)
  • 155.0 mm (3)
  • 170.0 mm (15)
  • 175.0 mm (4)
  • 177.8 mm (11)
  • 178.0 mm (2)
  • 179.8 mm (2)
  • 180.0 mm (11)
  • 200.0 mm (9)
  • 201.425 mm (1)
  • 202.601 mm (1)
  • 203.201 mm (7)
  • 204.675 mm (2)
  • 205.275 mm (1)
  • 250.0 mm (8)
  • 250.925 mm (1)
  • 254.0 mm (18)
  • 300.0 mm (6)
  • 304.8 mm (8)
  • 350.0 mm (1)
  • 355.6 mm (7)
  • 406.401 mm (8)
Over All Length [L] Min to Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (25)
  • 0.002 in (175)
  • 0.003 in (349)
  • 0.004 in (241)
  • 0.005 in (116)
  • 0.006 in (187)
  • 0.007 in (274)
  • 0.008 in (281)
  • 0.01 in (228)
  • 0.011 in (126)
  • 0.012 in (83)
  • 0.014 in (174)
  • 0.015 in (30)
  • 0.016 in (76)
  • 0.017 in (106)
  • 0.019 in (108)
  • 0.02 in (149)
  • 0.021 in (25)
  • 0.023 in (109)
  • 0.027 in (3)
  • 0.028 in (17)
  • 0.03 in (107)
  • 0.031 in (139)
  • 0.033 in (11)
  • 0.035 in (106)
  • 0.037 in (9)
  • 0.038 in (1)
  • 0.039 in (155)
  • 0.047 in (139)
  • 0.049 in (139)
  • 0.06 in (140)
  • 0.062 in (63)
  • 0.063 in (178)
  • 0.069 in (139)
  • 0.078 in (63)
  • 0.079 in (102)
  • 0.089 in (102)
  • 0.095 in (102)
  • 0.098 in (39)
  • 0.125 in (39)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (25)
  • 0.05 mm (175)
  • 0.076 mm (349)
  • 0.1 mm (241)
  • 0.125 mm (116)
  • 0.151 mm (187)
  • 0.176 mm (274)
  • 0.2 mm (281)
  • 0.225 mm (114)
  • 0.25 mm (179)
  • 0.275 mm (126)
  • 0.301 mm (83)
  • 0.325 mm (156)
  • 0.351 mm (120)
  • 0.375 mm (30)
  • 0.4 mm (76)
  • 0.426 mm (106)
  • 0.45 mm (107)
  • 0.476 mm (33)
  • 0.5 mm (149)
  • 0.525 mm (25)
  • 0.576 mm (109)
  • 0.65 mm (3)
  • 0.701 mm (17)
  • 0.75 mm (107)
  • 0.775 mm (139)
  • 0.826 mm (11)
  • 0.9 mm (106)
  • 0.925 mm (9)
  • 0.976 mm (1)
  • 1.0 mm (155)
  • 1.201 mm (139)
  • 1.25 mm (139)
  • 1.5 mm (139)
  • 1.526 mm (1)
  • 1.576 mm (63)
  • 1.6 mm (178)
  • 1.75 mm (139)
  • 1.975 mm (63)
  • 2.0 mm (102)
  • 2.25 mm (102)
  • 2.401 mm (102)
  • 2.5 mm (39)
  • 3.176 mm (39)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (918)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (918)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K00331 (46)
  • K1 (8)
  • K2885 (139)
  • K313 (185)
  • K420 (202)
  • K4H (100)
  • K68 (277)
  • KB1345 (102)
  • KB1630 (102)
  • KB5625 (63)
  • KBH20 (32)
  • KC250 (147)
  • KC5010 (455)
  • KC5025 (759)
  • KC5410 (179)
  • KC710 (245)
  • KC720 (300)
  • KC722 (231)
  • KC730 (388)
  • KC732 (63)
  • KC810 (197)
  • KC850 (234)
  • KC910 (100)
  • KC9105 (1)
  • KC9110 (178)
  • KC9120 (63)
  • KC9320 (178)
  • KC935 (178)
  • KC950 (178)
  • KCK20 (139)
  • KCK20B (178)
  • KCP10B (178)
  • KCP25B (178)
  • KCU10 (268)
  • KCU25 (270)
  • KD050 (32)
  • KD081 (63)
  • KD100 (84)
  • KD120 (102)
  • KD1425 (63)
  • KT175 (139)
  • KT315 (178)
  • KU10T (178)
  • KU25T (231)
  • KU30T (178)
  • KY3000 (102)
  • PN120 (2)
  • SP4066 (10)
  • THM (8)
  • TN10P (8)
  • TN6010 (11)
  • TN6025 (17)
  • TN7110 (11)
  • TTS (2)
  • WU10HT (2)
  • WU10PT (5)
  • WU25PT (2)
Hand Of Tool
Hand Of Tool
  • L (116)
  • R (170)
Wiper Insert
Wiper Insert
  • N (1239)
F Dimension
F Dimension
  • 6.551 mm (3)
  • 6.726 mm (1)
  • 7.0 mm (2)
  • 7.101 mm (4)
  • 7.301 mm (4)
  • 8.25 mm (1)
  • 8.9 mm (5)
  • 9.525 mm (2)
  • 10.0 mm (1)
  • 10.3 mm (2)
  • 10.775 mm (1)
  • 10.976 mm (4)
  • 11.0 mm (4)
  • 11.101 mm (2)
  • 11.3 mm (2)
  • 11.5 mm (2)
  • 11.675 mm (4)
  • 11.701 mm (1)
  • 12.0 mm (1)
  • 12.576 mm (3)
  • 12.701 mm (8)
  • 12.951 mm (4)
  • 13.0 mm (2)
  • 13.4 mm (3)
  • 14.0 mm (2)
  • 14.15 mm (3)
  • 14.275 mm (4)
  • 15.601 mm (2)
  • 15.8 mm (1)
  • 15.875 mm (5)
  • 16.0 mm (21)
  • 16.1 mm (2)
  • 16.3 mm (2)
  • 16.5 mm (3)
  • 17.0 mm (4)
  • 17.2 mm (2)
  • 17.35 mm (2)
  • 17.401 mm (1)
  • 17.475 mm (4)
  • 18.026 mm (3)
  • 19.05 mm (6)
  • 19.55 mm (1)
  • 20.0 mm (6)
  • 21.5 mm (2)
  • 21.6 mm (1)
  • 22.0 mm (8)
  • 22.225 mm (4)
  • 24.0 mm (2)
  • 25.0 mm (15)
  • 25.401 mm (20)
  • 25.8 mm (2)
  • 27.0 mm (4)
  • 28.576 mm (2)
  • 31.75 mm (27)
  • 32.0 mm (22)
  • 34.926 mm (4)
  • 35.0 mm (1)
  • 38.1 mm (16)
  • 38.875 mm (1)
  • 40.0 mm (7)
  • 41.276 mm (4)
  • 50.801 mm (4)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.258 in (3)
  • 0.265 in (1)
  • 0.276 in (2)
  • 0.28 in (4)
  • 0.288 in (4)
  • 0.325 in (1)
  • 0.351 in (5)
  • 0.375 in (2)
  • 0.394 in (1)
  • 0.406 in (2)
  • 0.424 in (1)
  • 0.432 in (4)
  • 0.433 in (4)
  • 0.437 in (2)
  • 0.445 in (2)
  • 0.453 in (2)
  • 0.46 in (4)
  • 0.461 in (1)
  • 0.473 in (1)
  • 0.495 in (3)
  • 0.5 in (8)
  • 0.51 in (4)
  • 0.512 in (2)
  • 0.528 in (3)
  • 0.551 in (2)
  • 0.557 in (3)
  • 0.562 in (4)
  • 0.614 in (2)
  • 0.622 in (1)
  • 0.625 in (5)
  • 0.63 in (21)
  • 0.634 in (2)
  • 0.642 in (2)
  • 0.65 in (3)
  • 0.669 in (4)
  • 0.677 in (2)
  • 0.683 in (2)
  • 0.685 in (1)
  • 0.689 in (4)
  • 0.71 in (3)
  • 0.75 in (6)
  • 0.77 in (1)
  • 0.787 in (6)
  • 0.846 in (2)
  • 0.85 in (1)
  • 0.866 in (8)
  • 0.875 in (4)
  • 0.946 in (2)
  • 0.984 in (15)
  • 1.0 in (20)
  • 1.016 in (2)
  • 1.063 in (4)
  • 1.125 in (2)
  • 1.25 in (27)
  • 1.26 in (22)
  • 1.375 in (4)
  • 1.379 in (1)
  • 1.5 in (16)
  • 1.532 in (1)
  • 1.575 in (7)
  • 1.625 in (4)
  • 2.0 in (4)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (87)
  • 11.175 mm (3)
  • 11.5 mm (2)
  • 12.201 mm (1)
  • 12.701 mm (4)
  • 13.0 mm (4)
  • 15.25 mm (1)
  • 16.0 mm (2)
  • 16.5 mm (3)