Suggestions

Product Suggestions

Product Categories

Resources

オンラインでご注文
successfully added to cart
View Cart

溝入れと突っ切り

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (3197)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3197)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3197)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (3197)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3197)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3197)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (3197)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (3197)
  • M Stainless Steel (2493)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2493)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2493)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2493)
  • K Cast Iron (3076)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3076)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3046)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (3029)
  • N Non-Ferrous Materials (2734)
    • N1
      Wrought Aluminum
      (2723)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2395)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (95)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (2734)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (2406)
    • N6
      Carbon, Graphite Composites, CFRP
      (2395)
    • N7
      MMC's
      (84)
  • S High-Temp Alloys (2764)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2764)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2764)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2764)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2712)
  • H Hardened Materials (1192)
    • H1
      Hardened Materials 44-48 HRC
      (1192)
    • H2
      Hardened Materials 48-55 HRC
      (858)
    • H3
      Hardened Materials 56-60 HRC
      (142)
    • H4
      Hardened Materials >60 HRC
      (142)
Select First Choice
  • CN (474)
  • DE (502)
  • GB (94)
  • IN (114)
  • US (599)
Applications
  • Back Boring Back Boring (3344)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (375)
  • Blind Hole Finishing Blind Hole Finishing (375)
  • Boring Boring (2563)
  • CRT Boring CRT Boring (375)
  • CRT Profiling CRT Profiling (375)
  • Chamfer Milling Chamfer Milling (168)
  • Chamfer Turning Chamfer Turning (622)
  • Cut-Off Cut-Off (4718)
  • Deep Grooving Deep Grooving (1425)
  • Drilling Drilling (351)
  • Face Grooving Face Grooving (4669)
  • Face Milling Face Milling (351)
  • Facing Facing (3660)
  • Grooving Grooving (4815)
  • ID Facing ID Facing (4574)
  • ID Grooving ID Grooving (4606)
  • ID Thread Turning ID Thread Turning (3765)
  • Multiple Direction Cutting Multiple Direction Cutting (1521)
  • OD Thread Turning OD Thread Turning (3765)
  • Plunge Turning Plunge Turning (3656)
  • Profiling Profiling (4077)
  • Shoulder Milling Shoulder Milling (168)
  • TRN Boring TRN Boring (1206)
  • Threading Threading (750)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (375)
  • Through Hole Finishing Through Hole Finishing (375)
  • Turning Turning (4087)
Type of Thread
  • 60 (3)
  • ACME (1)
  • API (1)
  • API RD (1)
  • BSW (1)
  • BUTTRESS (3)
  • M (2)
  • NPT (1)
  • STUB ACME (1)
  • UN (3)
  • UNJ (1)
Cutting Condition
  • Heavily Interrupted Cut (2261)
  • Lightly Interrupted Cut (2500)
  • Smooth Cut (3176)
  • Varying Depth of Cut (2879)
Tool Cutting Edge Angle
  • 45.0 (14)
  • 90.0 (1581)
  • 92.25 (32)
to
Cutting Edges Per Insert
  • 1.0 (1171)
  • 2.0 (3398)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (2)
  • 0.051 (1)
  • 0.066 (1)
  • 0.076 (3)
  • 0.08 (22)
  • 0.089 (179)
  • 0.09 (84)
  • 0.094 (1)
  • 0.1 (9)
  • 0.102 (3)
  • 0.116 (1)
  • 0.127 (1)
  • 0.131 (1)
  • 0.132 (1)
  • 0.133 (1)
  • 0.15 (33)
  • 0.155 (1)
  • 0.157 (1)
  • 0.165 (1)
  • 0.173 (1)
  • 0.178 (1)
  • 0.18 (8)
  • 0.185 (65)
  • 0.19 (351)
  • 0.191 (1044)
  • 0.198 (1)
  • 0.2 (542)
  • 0.202 (2)
  • 0.203 (65)
  • 0.224 (1)
  • 0.235 (1)
  • 0.244 (1)
  • 0.25 (9)
  • 0.251 (1)
  • 0.254 (1)
  • 0.255 (2)
  • 0.269 (1)
  • 0.282 (1)
  • 0.284 (1)
  • 0.3 (95)
  • 0.315 (95)
  • 0.318 (108)
  • 0.33 (1)
  • 0.34 (3)
  • 0.343 (16)
  • 0.356 (1)
  • 0.38 (2)
  • 0.4 (629)
  • 0.404 (1)
  • 0.406 (1)
  • 0.43 (1)
  • 0.445 (1)
  • 0.472 (1)
  • 0.49 (1)
  • 0.5 (14)
  • 0.508 (13)
  • 0.565 (10)
  • 0.57 (11)
  • 0.572 (372)
  • 0.575 (30)
  • 0.75 (11)
  • 0.787 (83)
  • 0.79 (77)
  • 0.794 (61)
  • 0.8 (497)
  • 0.826 (21)
  • 0.84 (25)
  • 0.902 (1)
  • 1.0 (64)
  • 1.06 (46)
  • 1.122 (17)
  • 1.18 (16)
  • 1.19 (34)
  • 1.194 (77)
  • 1.195 (10)
  • 1.2 (152)
  • 1.21 (18)
  • 1.25 (17)
  • 1.5 (130)
  • 1.525 (43)
  • 1.56 (71)
  • 1.58 (5)
  • 1.585 (17)
  • 1.588 (142)
  • 1.59 (112)
  • 1.6 (1)
  • 1.65 (71)
  • 1.75 (17)
  • 1.98 (7)
  • 1.981 (27)
  • 2.0 (111)
  • 2.025 (34)
  • 2.06 (67)
  • 2.25 (12)
  • 2.37 (63)
  • 2.375 (1)
  • 2.38 (94)
  • 2.388 (70)
  • 2.39 (5)
  • 2.44 (67)
  • 2.5 (80)
  • 2.525 (33)
  • 2.56 (45)
  • 2.781 (4)
  • 3.0 (62)
  • 3.025 (30)
  • 3.06 (39)
  • 3.17 (38)
  • 3.175 (78)
  • 3.18 (30)
  • 3.24 (39)
  • 3.96 (20)
  • 3.962 (2)
  • 3.969 (17)
  • 3.97 (17)
  • 4.0 (35)
  • 4.025 (23)
  • 4.03 (21)
  • 4.06 (21)
  • 4.76 (18)
  • 4.763 (18)
  • 5.0 (20)
  • 5.025 (25)
to
Corner Radius
  • 0.002 (1)
  • 0.0026 (1)
  • 0.003 (3)
  • 0.0031 (22)
  • 0.0035 (260)
  • 0.0037 (1)
  • 0.004 (9)
  • 0.0046 (1)
  • 0.005 (7)
  • 0.0052 (1)
  • 0.0053 (1)
  • 0.0059 (6)
  • 0.006 (28)
  • 0.0062 (1)
  • 0.0065 (1)
  • 0.0068 (1)
  • 0.007 (1)
  • 0.0075 (1463)
  • 0.0078 (1)
  • 0.0079 (68)
  • 0.008 (536)
  • 0.0088 (1)
  • 0.0093 (1)
  • 0.0096 (1)
  • 0.0099 (1)
  • 0.01 (11)
  • 0.0106 (1)
  • 0.0111 (1)
  • 0.0112 (1)
  • 0.0118 (1)
  • 0.012 (94)
  • 0.0124 (1)
  • 0.0125 (202)
  • 0.013 (1)
  • 0.0135 (16)
  • 0.014 (3)
  • 0.015 (73)
  • 0.0156 (126)
  • 0.0157 (164)
  • 0.0158 (61)
  • 0.0159 (1)
  • 0.016 (584)
  • 0.017 (1)
  • 0.0175 (1)
  • 0.0186 (1)
  • 0.0193 (1)
  • 0.0197 (14)
  • 0.02 (13)
  • 0.0225 (422)
  • 0.0295 (11)
  • 0.031 (523)
  • 0.0312 (22)
  • 0.0313 (61)
  • 0.0315 (95)
  • 0.032 (249)
  • 0.0325 (21)
  • 0.033 (25)
  • 0.0355 (1)
  • 0.039 (44)
  • 0.0394 (20)
  • 0.042 (46)
  • 0.046 (16)
  • 0.047 (261)
  • 0.048 (35)
  • 0.0492 (17)
  • 0.059 (100)
  • 0.0591 (61)
  • 0.06 (43)
  • 0.062 (111)
  • 0.0625 (165)
  • 0.063 (102)
  • 0.065 (71)
  • 0.0689 (17)
  • 0.078 (34)
  • 0.0785 (34)
  • 0.0787 (16)
  • 0.079 (85)
  • 0.0797 (34)
  • 0.081 (67)
  • 0.0886 (12)
  • 0.093 (63)
  • 0.0935 (1)
  • 0.0937 (1)
  • 0.094 (168)
  • 0.096 (67)
  • 0.098 (65)
  • 0.0984 (35)
  • 0.0985 (24)
  • 0.0994 (33)
  • 0.101 (45)
  • 0.1095 (4)
  • 0.115 (21)
  • 0.118 (56)
  • 0.1181 (25)
  • 0.1191 (30)
  • 0.121 (39)
  • 0.125 (126)
  • 0.127 (35)
  • 0.128 (34)
  • 0.155 (15)
  • 0.156 (39)
  • 0.1565 (17)
  • 0.157 (15)
  • 0.1575 (18)
  • 0.158 (32)
  • 0.1585 (23)
  • 0.159 (16)
  • 0.16 (21)
  • 0.1875 (18)
  • 0.188 (18)
  • 0.1969 (17)
  • 0.197 (18)
  • 0.1978 (25)
  • 0.787 (7)
to
application
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (1886)
  • Lightly Interrupted Cut (2125)
  • Smooth Cut (2801)
  • Varying Depth of Cut (2504)
Grade Of Cutting Tool
  • K1 (1)
  • K1025 (61)
  • K2885 (21)
  • K313 (492)
  • K420 (81)
  • K4H (4)
  • K68 (174)
  • KB1345 (9)
  • KB1630 (128)
  • KB5625 (112)
  • KC250 (5)
  • KC5010 (491)
  • KC5025 (661)
  • KC5410 (33)
  • KC710 (46)
  • KC720 (126)
  • KC722 (3)
  • KC730 (283)
  • KC732 (10)
  • KC810 (128)
  • KC850 (201)
  • KC910 (2)
  • KC9110 (270)
  • KC9120 (2)
  • KC9125 (189)
  • KC9320 (47)
  • KC935 (67)
  • KC950 (56)
  • KCK20 (143)
  • KCK20B (284)
  • KCM35B (183)
  • KCP10 (195)
  • KCP10B (351)
  • KCP25 (197)
  • KCP25B (392)
  • KCU10 (814)
  • KCU25 (1084)
  • KD050 (3)
  • KD081 (11)
  • KD100 (14)
  • KD120 (12)
  • KD1405 (81)
  • KD1425 (12)
  • KMF (9)
  • KMS (53)
  • KT175 (9)
  • KT315 (225)
  • KTP10 (16)
  • KU10 (167)
  • KU10T (105)
  • KU25T (21)
  • KU30T (206)
  • KY1525 (6)
  • KY1540 (4)
  • KY2000 (8)
  • KY2100 (3)
  • KY3000 (6)
  • KY3500 (143)
  • KY4300 (11)
  • KYS30 (60)
  • SP88F8 (21)
Wiper Insert
  • N (4569)
Minimum Axial Groove Diameter
  • 0.0 (68)
  • 0.44 (2)
  • 0.453 (2)
  • 0.625 (4)
  • 0.6299 (4)
  • 0.63 (6)
  • 0.6693 (4)
  • 0.728 (2)
  • 0.73 (4)
  • 0.787 (15)
  • 0.7874 (6)
  • 0.8 (1)
  • 0.8268 (8)
  • 0.866 (2)
  • 0.8661 (2)
  • 0.984 (21)
  • 0.9843 (17)
  • 1.0 (6)
  • 1.02 (1)
  • 1.0236 (9)
  • 1.024 (5)
  • 1.102 (2)
  • 1.1024 (3)
  • 1.125 (4)
  • 1.177 (1)
  • 1.181 (7)
  • 1.25 (6)
  • 1.2598 (6)
  • 1.26 (11)
  • 1.299 (4)
  • 1.339 (4)
  • 1.375 (6)
  • 1.378 (14)
  • 1.4173 (8)
  • 1.496 (2)
  • 1.4961 (3)
  • 1.5 (8)
  • 1.5748 (5)
  • 1.575 (22)
  • 1.61 (1)
  • 1.614 (3)
  • 1.626 (22)
  • 1.6535 (6)
  • 1.732 (2)
  • 1.7323 (6)
  • 1.75 (6)
  • 1.874 (17)
  • 1.8898 (4)
  • 1.9685 (6)
  • 1.969 (28)
  • 2.0 (5)
  • 2.047 (5)
  • 2.0472 (11)
  • 2.126 (4)
  • 2.2 (4)
  • 2.229 (22)
  • 2.25 (11)
  • 2.252 (14)
  • 2.2835 (4)
  • 2.362 (48)
  • 2.3622 (4)
  • 2.375 (4)
  • 2.5 (28)
  • 2.5197 (4)
  • 2.559 (1)
  • 2.6772 (4)
  • 2.75 (8)
  • 2.7559 (10)
  • 2.812 (1)
  • 2.875 (2)
  • 2.953 (52)
  • 3.0 (12)
  • 3.1496 (8)
  • 3.15 (4)
  • 3.25 (6)
  • 3.5 (495)
  • 3.5433 (11)
  • 3.622 (4)
  • 3.937 (72)
  • 4.7244 (24)
  • 4.75 (2)
  • 5.0 (2)
  • 5.1181 (4)
  • 5.1969 (4)
  • 5.5 (796)
  • 5.75 (5)
  • 6.874 (94)
  • 7.087 (68)
  • 7.2441 (4)
  • 7.874 (8)
  • 8.252 (251)
  • 8.752 (51)
  • 9.8425 (6)
  • 9.843 (62)
  • 11.4173 (8)
  • 13.11 (1)
  • 13.78 (63)
to
Minimum Axial Groove Diameter
  • 0.0 (68)
  • 11.176 (1)
  • 11.18 (1)
  • 11.5 (2)
  • 15.88 (4)
  • 16.0 (8)
  • 16.002 (2)
  • 17.0 (4)
  • 18.5 (2)
  • 18.542 (4)
  • 19.99 (3)
  • 20.0 (18)
  • 20.32 (1)
  • 21.0 (8)
  • 22.0 (4)
  • 24.994 (6)
  • 25.0 (32)
  • 25.4 (6)
  • 26.0 (15)
  • 27.991 (2)
  • 28.0 (3)
  • 28.575 (3)
  • 28.58 (1)
  • 30.0 (8)
  • 31.75 (6)
  • 32.0 (17)
  • 33.0 (4)
  • 34.0 (4)
  • 34.92 (2)
  • 34.925 (4)
  • 35.0 (12)
  • 35.001 (2)
  • 36.0 (8)
  • 37.998 (2)
  • 38.0 (3)
  • 38.1 (8)
  • 40.0 (27)
  • 41.0 (4)
  • 41.3 (22)
  • 42.0 (6)
  • 44.0 (8)
  • 44.45 (6)
  • 47.6 (17)
  • 48.0 (4)
  • 50.0 (34)
  • 50.8 (5)
  • 52.0 (16)
  • 54.0 (4)
  • 55.88 (4)
  • 56.625 (22)
  • 57.15 (11)
  • 57.2 (14)
  • 58.0 (4)
  • 60.0 (52)
  • 60.325 (4)
  • 63.5 (28)
  • 64.0 (4)
  • 65.0 (1)
  • 68.0 (4)
  • 69.85 (8)
  • 70.0 (10)
  • 71.425 (1)
  • 73.025 (2)
  • 75.0 (52)
  • 76.2 (12)
  • 80.0 (12)
  • 82.55 (6)
  • 88.9 (495)
  • 90.0 (11)
  • 92.0 (4)
  • 100.0 (72)
  • 120.0 (24)
  • 120.65 (2)
  • 127.0 (2)
  • 130.0 (4)
  • 132.0 (4)
  • 139.7 (796)
  • 146.05 (5)
  • 174.6 (94)
  • 180.0 (68)
  • 184.0 (4)
  • 200.0 (8)
  • 209.6 (251)
  • 222.3 (51)
  • 250.0 (68)
  • 290.0 (8)
  • 333.0 (1)
  • 350.0 (63)
to
Maximum Axial Groove Diameter
  • 19.99 (2)
  • 20.0 (32)
  • 21.0 (4)
  • 23.0 (1)
  • 24.994 (3)
  • 25.0 (6)
  • 26.0 (15)
  • 27.0 (24)
  • 28.0 (8)
  • 30.0 (8)
  • 32.0 (40)
  • 34.0 (9)
  • 35.0 (23)
  • 35.001 (2)
  • 35.992 (4)
  • 36.0 (16)
  • 37.998 (2)
  • 38.0 (4)
  • 40.0 (8)
  • 42.0 (38)
  • 46.0 (4)
  • 48.0 (8)
  • 48.006 (2)
  • 50.0 (20)
  • 52.0 (24)
  • 54.0 (2)
  • 58.0 (7)
  • 58.001 (2)
  • 60.0 (30)
  • 62.0 (29)
  • 64.0 (15)
  • 66.0 (12)
  • 72.0 (4)
  • 74.0 (4)
  • 75.0 (46)
  • 80.0 (4)
  • 82.0 (4)
  • 84.0 (4)
  • 94.0 (4)
  • 100.0 (60)
  • 112.0 (4)
  • 124.0 (4)
  • 136.0 (4)
  • 150.0 (4)
  • 160.0 (3)
  • 180.0 (68)
  • 200.0 (4)
  • 212.0 (4)
  • 220.0 (3)
  • 250.0 (64)
  • 254.0 (4)
  • 300.0 (12)
  • 350.0 (62)
  • 999.0 (79)
  • 9999.0 (1830)
to
Maximum Axial Groove Diameter
  • 0.787 (30)
  • 0.7874 (4)
  • 0.8268 (4)
  • 0.9055 (1)
  • 0.984 (3)
  • 0.9843 (6)
  • 1.0236 (7)
  • 1.024 (8)
  • 1.028 (1)
  • 1.063 (24)
  • 1.102 (4)
  • 1.1024 (4)
  • 1.181 (3)
  • 1.1811 (4)
  • 1.185 (1)
  • 1.26 (40)
  • 1.3386 (5)
  • 1.339 (4)
  • 1.378 (24)
  • 1.417 (4)
  • 1.4173 (16)
  • 1.496 (2)
  • 1.4961 (4)
  • 1.575 (8)
  • 1.618 (1)
  • 1.654 (38)
  • 1.811 (4)
  • 1.8898 (8)
  • 1.89 (2)
  • 1.969 (19)
  • 2.047 (21)
  • 2.0472 (3)
  • 2.126 (2)
  • 2.2835 (9)
  • 2.362 (30)
  • 2.441 (29)
  • 2.5197 (4)
  • 2.52 (11)
  • 2.5984 (12)
  • 2.8346 (4)
  • 2.9134 (4)
  • 2.953 (46)
  • 3.1496 (4)
  • 3.228 (4)
  • 3.3071 (4)
  • 3.7008 (4)
  • 3.937 (60)
  • 4.4094 (4)
  • 4.8819 (4)
  • 5.3543 (4)
  • 5.9055 (4)
  • 6.2992 (3)
  • 7.0866 (2)
  • 7.087 (66)
  • 7.874 (4)
  • 8.3465 (4)
  • 8.6614 (3)
  • 9.843 (64)
  • 10.0 (4)
  • 11.811 (12)
  • 13.78 (62)
  • 39.3307 (12)
  • 39.331 (67)
  • 393.661 (1830)