successfully added to cart
View Cart

Notifications

Mark all as read

ウィディア材種

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (570)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (567)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (567)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (570)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (570)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (567)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (540)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (528)
  • M Stainless Steel (554)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (554)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (554)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (528)
  • K Cast Iron (450)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (450)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (450)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (450)
  • N Non-Ferrous Materials (341)
    • N1
      Wrought Aluminum
      (321)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (335)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (305)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (311)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (324)
    • N6
      Carbon, Graphite Composites, CFRP
      (287)
    • N7
      MMC's
      (273)
  • S High-Temp Alloys (502)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (496)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (496)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (502)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (502)
  • H Hardened Materials (64)
    • H1
      Hardened Materials 44-48 HRC
      (64)
    • H2
      Hardened Materials 48-55 HRC
      (59)
    • H3
      Hardened Materials 56-60 HRC
      (59)
    • H4
      Hardened Materials >60 HRC
      (59)
Select First Choice
  • BR (55)
  • CN (231)
  • DE (231)
  • GB (162)
  • IN (124)
  • SG (160)
  • US (234)
Applications
Applications
  • ID Thread Turning ID Thread Turning (36)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (51)
  • Interrupted (201)
  • Lightly Interrupted Cut (74)
  • Smooth Cut (186)
  • Stable (309)
  • Unstable (250)
  • Varying Depth of Cut (82)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (12)
  • 1.0 (28)
  • 2.0 (246)
  • 3.0 (155)
  • 4.0 (174)
  • 8.0 (65)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0015 in (2)
  • 0.004 in (9)
  • 0.008 in (58)
  • 0.015 in (6)
  • 0.0156 in (184)
  • 0.016 in (27)
  • 0.0236 in (6)
  • 0.031 in (33)
  • 0.0312 in (3)
  • 0.0313 in (197)
  • 0.0315 in (3)
  • 0.033 in (5)
  • 0.0335 in (4)
  • 0.039 in (9)
  • 0.0394 in (6)
  • 0.0397 in (6)
  • 0.0469 in (47)
  • 0.047 in (6)
  • 0.0472 in (6)
  • 0.0476 in (5)
  • 0.0625 in (9)
  • 0.063 in (2)
  • 0.0631 in (2)
  • 0.0787 in (3)
  • 0.079 in (6)
  • 0.631 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.038 mm (2)
  • 0.1 mm (4)
  • 0.102 mm (5)
  • 0.2 mm (58)
  • 0.397 mm (11)
  • 0.4 mm (206)
  • 0.6 mm (6)
  • 0.8 mm (236)
  • 0.85 mm (9)
  • 1.0 mm (21)
  • 1.2 mm (64)
  • 1.6 mm (15)
  • 2.0 mm (9)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (51)
  • Interrupted (201)
  • Lightly Interrupted Cut (74)
  • Smooth Cut (186)
  • Stable (309)
  • Unstable (250)
  • Varying Depth of Cut (82)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CS5 (11)
  • K313 (16)
  • K68 (2)
  • KC5010 (75)
  • KC5025 (32)
  • KC5410 (14)
  • KC7015 (6)
  • KC7140 (66)
  • KC720 (8)
  • KC7215 (38)
  • KC7225 (1)
  • KC730 (12)
  • KC7315 (14)
  • KCK05 (3)
  • KCK05B (1)
  • KCK15B (4)
  • KCP05 (4)
  • KCP10 (6)
  • KCP10B (6)
  • KCP25 (6)
  • KCP25B (5)
  • KCPK10 (40)
  • KCU10 (14)
  • KCU25 (112)
  • KCU40 (119)
  • KD1425 (6)
  • KM1 (13)
  • KMF (11)
  • KT315 (33)
  • KT325 (2)
Wiper Insert
Wiper Insert
  • N (646)
  • Y (34)
Countersunk Angle
Countersunk Angle
  • 30.0 (4)
  • 41.0 (4)
  • 45.0 (19)
  • 50.0 (1)
Countersunk Angle Min to Countersunk Angle Max
frontEnd
Cutting Width
Cutting Width
  • 0.2283 in (1)
  • 0.2402 in (1)
  • 0.3858 in (2)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 5.8 mm (1)
  • 6.1 mm (1)
  • 9.8 mm (2)
Cutting Width Min to Cutting Width Max
Insert Shape
Insert Shape
  • B-PARALLELOGRAM 82 (32)
  • C-DIAMOND/RHOMBIC 80 (243)
  • COUNTERBORE/COUNTERSINK MISC (34)
  • D-DIAMOND/RHOMBIC 90 (30)
  • S-SQUARE 90 (181)
  • T-TRIANGLE 60 (12)
  • X-TRIGON 84 (148)
insertGeometry
Shape
Shape
  • B-PARALLELOGRAM 82 (32)
  • C-DIAMOND/RHOMBIC 80 (243)
  • COUNTERBORE/COUNTERSINK MISC (34)
  • D-DIAMOND/RHOMBIC 90 (30)
  • S-SQUARE 90 (181)
  • T-TRIANGLE 60 (12)
  • X-TRIGON 84 (148)
Insert IC Size
Insert IC Size
  • 5.0 mm (7)
  • 5.42 mm (2)
  • 5.56 mm (13)
  • 6.0 mm (44)
  • 6.35 mm (82)
  • 7.8 mm (2)
  • 7.937 mm (17)
  • 7.94 mm (22)
  • 8.0 mm (38)
  • 9.52 mm (3)
  • 9.525 mm (107)
  • 10.0 mm (31)
  • 12.0 mm (25)
  • 12.7 mm (151)
  • 15.0 mm (25)
  • 15.73 mm (2)
  • 15.732 mm (18)
  • 15.875 mm (13)
  • 17.59 mm (2)
  • 17.6 mm (7)
  • 19.05 mm (4)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.1969 in (6)
  • 0.197 in (1)
  • 0.213 in (2)
  • 0.2188 in (13)
  • 0.236 in (5)
  • 0.2362 in (39)
  • 0.25 in (82)
  • 0.307 in (2)
  • 0.3125 in (39)
  • 0.315 in (38)
  • 0.375 in (110)
  • 0.394 in (29)
  • 0.395 in (2)
  • 0.472 in (25)
  • 0.5 in (151)
  • 0.5906 in (10)
  • 0.591 in (15)
  • 0.619 in (2)
  • 0.625 in (31)
  • 0.6925 in (2)
  • 0.6929 in (3)
  • 0.693 in (4)
  • 0.75 in (4)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 3.31 mm (7)
  • 3.97 mm (26)
  • 5.19 mm (1)
  • 5.29 mm (24)
  • 5.417 mm (6)
  • 5.42 mm (2)
  • 5.646 mm (4)
  • 6.207 mm (10)
  • 6.21 mm (2)
  • 6.35 mm (14)
  • 6.448 mm (33)
  • 6.45 mm (7)
  • 6.459 mm (6)
  • 6.472 mm (7)
  • 6.52 mm (1)
  • 6.62 mm (30)
  • 7.797 mm (13)
  • 7.8 mm (2)
  • 7.84 mm (1)
  • 7.937 mm (23)
  • 7.94 mm (24)
  • 9.38 mm (2)
  • 9.382 mm (18)
  • 9.525 mm (21)
  • 9.63 mm (3)
  • 9.672 mm (66)
  • 9.83 mm (1)
  • 9.92 mm (24)
  • 11.0 mm (3)
  • 11.53 mm (1)
  • 11.63 mm (4)
  • 11.64 mm (4)
  • 12.557 mm (12)
  • 12.56 mm (2)
  • 12.7 mm (34)
  • 12.896 mm (110)
  • 12.9 mm (2)
  • 13.75 mm (3)
  • 15.73 mm (2)
  • 15.732 mm (18)
  • 16.12 mm (4)
  • 16.5 mm (3)
  • 19.344 mm (4)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.13 in (1)
  • 0.1302 in (6)
  • 0.156 in (26)
  • 0.205 in (1)
  • 0.208 in (24)
  • 0.213 in (8)
  • 0.2223 in (4)
  • 0.244 in (12)
  • 0.25 in (14)
  • 0.2539 in (38)
  • 0.254 in (2)
  • 0.2543 in (6)
  • 0.2548 in (7)
  • 0.257 in (1)
  • 0.26 in (30)
  • 0.307 in (15)
  • 0.309 in (1)
  • 0.3125 in (23)
  • 0.313 in (24)
  • 0.369 in (2)
  • 0.3694 in (18)
  • 0.375 in (21)
  • 0.3791 in (3)
  • 0.3808 in (59)
  • 0.381 in (7)
  • 0.387 in (1)
  • 0.391 in (24)
  • 0.4331 in (3)
  • 0.454 in (1)
  • 0.458 in (4)
  • 0.4582 in (4)
  • 0.494 in (2)
  • 0.4944 in (12)
  • 0.5 in (34)
  • 0.5077 in (110)
  • 0.5079 in (2)
  • 0.5413 in (3)
  • 0.619 in (20)
  • 0.6346 in (4)
  • 0.65 in (3)
  • 0.7616 in (4)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 11 (5)
  • 20 (33)
  • 21 (34)
  • 22 (4)
  • DS (34)
  • FF (3)
  • FN (29)
  • FP (31)
  • FW (16)
  • GD (49)
  • HD (4)
  • HP (144)
  • HPF (5)
  • LD (13)
  • LF (71)
  • LP (12)
  • MD (79)
  • MP (7)
  • MW (18)
  • RP (9)
  • UF (4)
Cutting Tool Material
Cutting Tool Material
  • D P (6)
  • H T (34)
  • H W (640)
Tolerance Class
Tolerance Class
  • G (152)
  • H (12)
  • M (142)
  • P (62)
No filters matching ""
product-image
Please adjust the following properties from

ISO カタログ

ANSI カタログ

to find similar products.
You are about to create a duplicate . Do you want to proceed?
You are about to delete Do you want to proceed?
What would you like to rename your to?
Please enter a valid name
Please enter a name for the duplicate
Please enter a valid name
You are about to add to your My Solutions page. Do you want to proceed?
Please enter a valid name
Send a copy of

Please enter a valid Email
Please enter a valid name

The following CAD files are available

Please select a file to download

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service.
item(s) successfully added to the cart
View Cart