ネガティブスタイルインサート • Kendex™
フィルタ
フィルタ
フィルタ表示
メートルインチ
Workpiece Material
Workpiece Material
- P Steel (2)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
- K Cast Iron (187)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(11)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(151)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(187)
- N Non-Ferrous Materials (4)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1)
- N7MMC's (1)
- N1Wrought Aluminum (1)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (4)
- S High-Temp Alloys (175)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(85)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(175)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(85)
- H Hardened Materials (111)
- H4Hardened Materials >60 HRC(1)
- H2Hardened Materials 48-55 HRC(111)
- H3Hardened Materials 56-60 HRC(111)
- H1Hardened Materials 44-48 HRC(111)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (1)
- 2.0 (65)
- 4.0 (96)
- 6.0 (27)
- 8.0 (119)
to
Corner Radius
Corner Radius
- 0.016 in(6)
- 0.031 in(68)
- 0.047 in(85)
- 0.063 in(72)
- 0.094 in(9)
- 0.125 in(1)
- 0.126 in(3)
- 0.188 in(9)
- 0.25 in(42)
- 0.375 in(7)
- 0.5 in(6)
to
Corner Radius
Corner Radius
- 0.4 mm(6)
- 0.8 mm(68)
- 1.2 mm(85)
- 1.6 mm(72)
- 2.4 mm(9)
- 3.175 mm(1)
- 3.2 mm(3)
- 4.775 mm(9)
- 6.35 mm(42)
- 9.525 mm(7)
- 12.7 mm(6)
to
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (1)
- K68 (3)
- KB1340 (13)
- KB5630 (1)
- KB9640 (11)
- KBK35 (1)
- KBK45 (23)
- KC725M (1)
- KY1540 (17)
- KY1615 (1)
- KY3500 (45)
- KY4300 (30)
- KY4400 (19)
- KYHK15B (90)
- KYK10 (7)
- KYK25 (11)
- KYS25 (9)
- KYS30 (23)
- KYSP30 (2)
Wiper Insert
Wiper Insert
- N (302)
- Y (6)
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (74)
- D-DIAMOND/RHOMBIC 55 (35)
- E-DIAMOND/RHOMBIC 75 (8)
- L-RECTANGLE 90 (2)
- R-ROUND (65)
- S-SQUARE 90 (95)
- T-TRIANGLE 60 (24)
- V-DIAMOND/RHOMBIC 35 (2)
- W-TRIGON 80 (3)
insertGeometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (74)
- D-DIAMOND/RHOMBIC 55 (35)
- E-DIAMOND/RHOMBIC 75 (8)
- L-RECTANGLE 90 (2)
- R-ROUND (65)
- S-SQUARE 90 (95)
- T-TRIANGLE 60 (24)
- V-DIAMOND/RHOMBIC 35 (2)
- W-TRIGON 80 (3)
Insert IC Size
Insert IC Size
- 6.35 mm(6)
- 9.525 mm(43)
- 10.0 mm(11)
- 12.7 mm(211)
- 15.875 mm(8)
- 19.05 mm(19)
- 25.4 mm(8)
to
Insert IC Size
Insert IC Size
- 0.25 in(6)
- 0.375 in(43)
- 0.394 in(11)
- 0.5 in(211)
- 0.625 in(8)
- 0.75 in(19)
- 1.0 in(8)
to
Cutting Edge Length
Cutting Edge Length
- 8.687 mm(3)
- 9.52 mm(2)
- 9.525 mm(11)
- 9.67 mm(2)
- 10.999 mm(4)
- 11.0 mm(1)
- 12.208 mm(9)
- 12.21 mm(2)
- 12.7 mm(62)
- 12.896 mm(60)
- 12.9 mm(9)
- 13.148 mm(8)
- 15.504 mm(24)
- 15.875 mm(6)
- 16.12 mm(2)
- 16.495 mm(1)
- 16.498 mm(9)
- 16.5 mm(7)
- 16.606 mm(1)
- 16.61 mm(1)
- 19.05 mm(12)
- 21.896 mm(1)
- 22.0 mm(2)
- 25.4 mm(2)
- 38.1 mm(2)
to
Cutting Edge Length
Cutting Edge Length
- 0.342 in(3)
- 0.375 in(13)
- 0.381 in(2)
- 0.433 in(5)
- 0.4806 in(9)
- 0.481 in(2)
- 0.5 in(62)
- 0.5077 in(61)
- 0.508 in(9)
- 0.5176 in(8)
- 0.6104 in(24)
- 0.625 in(6)
- 0.6346 in(2)
- 0.6495 in(10)
- 0.6496 in(6)
- 0.65 in(1)
- 0.6538 in(1)
- 0.654 in(1)
- 0.75 in(12)
- 0.8661 in(2)
- 1.0 in(2)
- 1.5 in(2)
to
Chip Breaker CBMD
Chip Breaker CBMD
- CB (1)
- CC (1)
- E (3)
- FW (3)
- GN (4)
Cutting Tool Material
Cutting Tool Material
- B H (25)
- C A (60)
- C N (194)
- H W (28)
Tolerance Class
Tolerance Class
- G (278)
- M (30)
No filters matching ""
