Downloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 1743772 |
| ISO Catalog ID | LT16ER115NPT |
| ANSI Catalog ID | LT16ER115NPT |
| Grade | KC5025 |
| [LI] Insert Length | 16.497 mm |
| [LI] Insert Length | 0.6495 in |
| Type of Thread | NPT |
| [RC] Corner Radius Center | 0.1 mm |
| [RC] Corner Radius Center | 0.004 in |
| [EX] Profile Distance | 1.1 mm |
| [EX] Profile Distance | 0.044 in |
| [E] Profile Distance | 1.5 mm |
| [E] Profile Distance | 0.059 in |
| Thread Pitch | 2.2 mm |
| TPI | 11.5 |
| Taper Per Foot Inch | 0.75 in |
Grades
KC5025
Composition: An advanced PVD-AlTiN-coated grade with a tough, ultra-fine-grain unalloyed substrate.
Application: For general-purpose machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials. Speeds may vary from low to medium and will handle interruptions and high feed rates.
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
I have read and accepted the Terms & Conditions of use
