Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Inserti intercambiabili

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (681)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (669)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (675)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (671)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (671)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (675)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (643)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (629)
  • M Stainless Steel (641)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (641)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (641)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (610)
  • K Cast Iron (548)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (548)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (548)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (548)
  • N Non-Ferrous Materials (401)
    • N1
      Wrought Aluminum
      (370)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (390)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (349)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (375)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (379)
    • N6
      Carbon, Graphite Composites, CFRP
      (329)
    • N7
      MMC's
      (307)
  • S High-Temp Alloys (573)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (567)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (567)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (568)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (571)
  • H Hardened Materials (69)
    • H1
      Hardened Materials 44-48 HRC
      (69)
    • H2
      Hardened Materials 48-55 HRC
      (64)
    • H3
      Hardened Materials 56-60 HRC
      (64)
    • H4
      Hardened Materials >60 HRC
      (64)
Select First Choice
  • CN (231)
  • DE (231)
  • GB (68)
  • IN (55)
  • US (231)
Applications
  • ID Thread Turning ID Thread Turning (1169)
Cutting Condition
  • Heavily Interrupted Cut (53)
  • Interrupted (202)
  • Lightly Interrupted Cut (84)
  • Smooth Cut (213)
  • Stable (333)
  • Unstable (277)
  • Varying Depth of Cut (98)
Cutting Edges Per Insert
  • 0.0 (18)
  • 1.0 (35)
  • 2.0 (370)
  • 3.0 (277)
  • 4.0 (285)
  • 8.0 (231)
to
cornerConfiguration
Corner Radius
  • 0.038 (2)
  • 0.1 (9)
  • 0.102 (7)
  • 0.2 (73)
  • 0.397 (23)
  • 0.4 (384)
  • 0.6 (9)
  • 0.794 (13)
  • 0.8 (428)
  • 0.85 (16)
  • 1.0 (21)
  • 1.2 (130)
  • 1.6 (45)
  • 2.0 (9)
to
Corner Radius
  • 0.0015 (2)
  • 0.004 (16)
  • 0.008 (73)
  • 0.015 (7)
  • 0.0156 (367)
  • 0.016 (33)
  • 0.0236 (9)
  • 0.031 (38)
  • 0.0312 (9)
  • 0.0313 (390)
  • 0.0315 (4)
  • 0.033 (6)
  • 0.0335 (10)
  • 0.039 (9)
  • 0.0394 (6)
  • 0.0397 (6)
  • 0.0469 (112)
  • 0.047 (12)
  • 0.0472 (6)
  • 0.0625 (39)
  • 0.063 (2)
  • 0.0631 (2)
  • 0.0787 (3)
  • 0.079 (6)
  • 0.631 (2)
to
application
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (53)
  • Interrupted (202)
  • Lightly Interrupted Cut (84)
  • Smooth Cut (213)
  • Stable (333)
  • Unstable (277)
  • Varying Depth of Cut (98)
Grade Of Cutting Tool
  • CD3 (2)
  • CD4 (9)
  • CM3 (1)
  • CM4 (11)
  • CS5 (24)
  • GX (1)
  • HT2 (4)
  • HTX (3)
  • K10U (5)
  • K15U (3)
  • K313 (24)
  • K6 (2)
  • K68 (7)
  • KC5010 (81)
  • KC5025 (43)
  • KC5410 (20)
  • KC5510 (7)
  • KC7015 (6)
  • KC7020 (5)
  • KC7025 (3)
  • KC7140 (70)
  • KC720 (21)
  • KC7210 (9)
  • KC7215 (58)
  • KC7225 (13)
  • KC730 (13)
  • KC7310 (6)
  • KC7315 (24)
  • KC732 (2)
  • KC7815 (26)
  • KC7820 (7)
  • KC7845 (2)
  • KC7935 (13)
  • KC8050 (2)
  • KC810 (9)
  • KC9010 (4)
  • KC9025 (8)
  • KC9105 (17)
  • KC9110 (34)
  • KC9125 (29)
  • KC9140 (5)
  • KC9215 (2)
  • KC9225 (41)
  • KC9240 (2)
  • KC9240NEW (23)
  • KC9315 (35)
  • KC9320 (17)
  • KC9325 (9)
  • KC990 (12)
  • KCD25 (3)
  • KCK05 (6)
  • KCK05B (3)
  • KCK15B (6)
  • KCM15B (1)
  • KCM25B (1)
  • KCP05 (4)
  • KCP05B (1)
  • KCP10 (8)
  • KCP10B (7)
  • KCP25 (6)
  • KCP25B (5)
  • KCPK10 (43)
  • KCU10 (16)
  • KCU25 (116)
  • KCU40 (119)
  • KD1425 (7)
  • KM1 (13)
  • KMF (21)
  • KT315 (39)
  • KT325 (4)
  • KU40D (11)
  • P30 (2)
Wiper Insert
  • N (1126)
  • Y (90)
Countersunk Angle
  • 30.0 (4)
  • 41.0 (10)
  • 45.0 (23)
  • 50.0 (3)
to
frontEnd
Insert Shape
  • B-PARALLELOGRAM 82 (65)
  • C-DIAMOND/RHOMBIC 80 (566)
  • COUNTERBORE/COUNTERSINK MISC (47)
  • D-DIAMOND/RHOMBIC 90 (30)
  • S-SQUARE 90 (226)
  • T-TRIANGLE 60 (12)
  • X-TRIGON 84 (270)
Cutting Width
  • 5.8 (2)
  • 6.1 (1)
  • 9.8 (2)
to
Cutting Width
  • 0.2283 (2)
  • 0.2402 (1)
  • 0.3858 (2)
to
insertGeometry
Shape
  • B-PARALLELOGRAM 82 (65)
  • C-DIAMOND/RHOMBIC 80 (566)
  • COUNTERBORE/COUNTERSINK MISC (47)
  • D-DIAMOND/RHOMBIC 90 (30)
  • S-SQUARE 90 (226)
  • T-TRIANGLE 60 (12)
  • X-TRIGON 84 (270)
Insert IC Size
  • 0.1969 (6)
  • 0.197 (1)
  • 0.213 (2)
  • 0.2188 (14)
  • 0.236 (13)
  • 0.2362 (89)
  • 0.25 (132)
  • 0.307 (2)
  • 0.3125 (49)
  • 0.315 (73)
  • 0.375 (189)
  • 0.3937 (2)
  • 0.394 (46)
  • 0.395 (3)
  • 0.472 (41)
  • 0.4724 (3)
  • 0.494 (2)
  • 0.5 (315)
  • 0.5906 (20)
  • 0.591 (25)
  • 0.619 (2)
  • 0.625 (68)
  • 0.6929 (8)
  • 0.693 (4)
  • 0.75 (29)
to
Insert IC Size
  • 5.0 (7)
  • 5.42 (2)
  • 5.56 (14)
  • 6.0 (102)
  • 6.35 (132)
  • 7.8 (2)
  • 7.937 (23)
  • 7.94 (26)
  • 8.0 (73)
  • 9.52 (3)
  • 9.525 (186)
  • 10.0 (51)
  • 12.0 (44)
  • 12.56 (2)
  • 12.7 (315)
  • 15.0 (45)
  • 15.73 (2)
  • 15.732 (23)
  • 15.875 (45)
  • 17.6 (12)
  • 19.05 (29)
to
Cutting Edge Length
  • 0.13 (1)
  • 0.1302 (6)
  • 0.155 (1)
  • 0.156 (61)
  • 0.1563 (1)
  • 0.205 (1)
  • 0.208 (41)
  • 0.2083 (6)
  • 0.213 (8)
  • 0.2223 (5)
  • 0.244 (17)
  • 0.25 (18)
  • 0.2539 (83)
  • 0.254 (11)
  • 0.257 (1)
  • 0.26 (48)
  • 0.2606 (2)
  • 0.307 (15)
  • 0.309 (1)
  • 0.3125 (33)
  • 0.3126 (3)
  • 0.313 (40)
  • 0.369 (2)
  • 0.3694 (23)
  • 0.375 (26)
  • 0.3791 (3)
  • 0.3808 (121)
  • 0.381 (14)
  • 0.387 (1)
  • 0.3906 (3)
  • 0.391 (41)
  • 0.4331 (3)
  • 0.454 (1)
  • 0.458 (5)
  • 0.4582 (4)
  • 0.4583 (2)
  • 0.494 (2)
  • 0.4944 (13)
  • 0.5 (44)
  • 0.5077 (268)
  • 0.5413 (3)
  • 0.619 (25)
  • 0.6346 (35)
  • 0.65 (3)
  • 0.7616 (29)
to
Cutting Edge Length
  • 3.31 (7)
  • 3.93 (1)
  • 3.94 (5)
  • 3.97 (57)
  • 5.19 (1)
  • 5.29 (47)
  • 5.417 (6)
  • 5.42 (2)
  • 5.646 (5)
  • 6.207 (15)
  • 6.21 (2)
  • 6.35 (18)
  • 6.448 (82)
  • 6.45 (12)
  • 6.52 (1)
  • 6.62 (50)
  • 7.797 (13)
  • 7.8 (2)
  • 7.84 (1)
  • 7.937 (33)
  • 7.94 (43)
  • 9.38 (2)
  • 9.382 (23)
  • 9.525 (26)
  • 9.63 (3)
  • 9.67 (4)
  • 9.672 (131)
  • 9.83 (1)
  • 9.92 (44)
  • 11.0 (3)
  • 11.53 (1)
  • 11.63 (5)
  • 11.64 (6)
  • 12.557 (13)
  • 12.56 (2)
  • 12.7 (44)
  • 12.896 (268)
  • 13.75 (3)
  • 15.73 (2)
  • 15.732 (23)
  • 16.12 (35)
  • 16.5 (3)
  • 19.344 (29)
to
Cutting Tool Material
  • D P (7)
  • H T (49)
  • H W (1159)
Chip Breaker CBMD
  • 11 (16)
  • 20 (43)
  • 21 (44)
  • 22 (4)
  • DS (34)
  • FF (9)
  • FN (72)
  • FP (45)
  • FW (39)
  • GD (106)
  • HD (14)
  • HP (182)
  • HPF (5)
  • LD (39)
  • LF (145)
  • LP (12)
  • MD (125)
  • MP (21)
  • MW (51)
  • RP (85)
  • UF (10)
Tolerance Class
  • G (204)
  • H (15)
  • M (422)
  • P (77)
other
Grade
  • CD3 (2)
  • CD4 (9)
  • CM3 (1)
  • CM4 (11)
  • CS5 (24)
  • GX (1)
  • HT2 (4)
  • HTX (3)
  • K10U (5)
  • K15U (3)
  • K313 (24)
  • K6 (2)
  • K68 (7)
  • KC5010 (81)
  • KC5025 (43)
  • KC5410 (20)
  • KC5510 (7)
  • KC7015 (6)
  • KC7020 (5)
  • KC7025 (3)
  • KC7140 (70)
  • KC720 (21)
  • KC7210 (9)
  • KC7215 (58)
  • KC7225 (13)
  • KC730 (13)
  • KC7310 (6)
  • KC7315 (24)
  • KC732 (2)
  • KC7815 (26)
  • KC7820 (7)
  • KC7845 (2)
  • KC7935 (13)
  • KC8050 (2)
  • KC810 (9)
  • KC9010 (4)
  • KC9025 (8)
  • KC9105 (17)
  • KC9110 (34)
  • KC9125 (29)
  • KC9140 (5)
  • KC9215 (2)
  • KC9225 (41)
  • KC9240 (2)
  • KC9240NEW (23)
  • KC9315 (35)
  • KC9320 (17)
  • KC9325 (9)
  • KC990 (12)
  • KCD25 (3)
  • KCK05 (6)
  • KCK05B (3)
  • KCK15B (6)
  • KCM15B (1)
  • KCM25B (1)
  • KCP05 (4)
  • KCP05B (1)
  • KCP10 (8)
  • KCP10B (7)
  • KCP25 (6)
  • KCP25B (5)
  • KCPK10 (43)
  • KCU10 (16)
  • KCU25 (116)
  • KCU40 (119)
  • KD1425 (7)
  • KM1 (13)
  • KMF (21)
  • KT315 (39)
  • KT325 (4)
  • KU40D (11)
  • P30 (2)
Platform
  • BF (22)
  • Drill Fix (452)
  • HTS-C (79)
  • KSEM (12)
  • KSEM PLUS (5)
  • Kenloc (227)
  • ModBORE (10)
  • Romicron (22)
  • SEFAS (12)
  • Screw-On (194)
Tool Unit
  • I (1201)
  • M (1206)
Insert Hand
  • L (11)
  • N (1038)
  • R (167)
Drilling Condition Material
  • K-All (65)
  • K1 (193)
  • K2 (199)
  • K3 (194)
  • M-All (67)
  • M1 (193)
  • M2 (199)
  • M3 (172)
  • N-All (17)
  • N1 (118)
  • N2 (110)
  • N3 (110)
  • N4 (116)
  • N5 (108)
  • N6 (89)
  • N7 (111)
  • P-All (58)
  • P0 (203)
  • P1 (235)
  • P2 (229)
  • P3 (225)
  • P4 (222)
  • P5 (213)
  • P6 (213)
  • S-All (71)
  • S1 (143)
  • S2 (143)
  • S3 (153)
  • S4 (144)
Cutting Condition Material
  • K-All (65)
  • K1 (193)
  • K2 (199)
  • K3 (194)
  • M-All (67)
  • M1 (193)
  • M2 (199)
  • M3 (172)
  • N-All (17)
  • N1 (118)
  • N2 (110)
  • N3 (110)
  • N4 (116)
  • N5 (108)
  • N6 (89)
  • N7 (111)
  • P-All (58)
  • P0 (203)
  • P1 (235)
  • P2 (229)
  • P3 (225)
  • P4 (222)
  • P5 (213)
  • P6 (213)
  • S-All (71)
  • S1 (143)
  • S2 (143)
  • S3 (153)
  • S4 (144)
Maximum Depth of Cut
Maximum Depth of Cut
Category Path
No filters matching ""
Narrow by category:
View Products in
Metric
Inch
ISO Carbide Inserts

Screw-On Inserts
(64 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
1560600 CCGT060202HP CCGT21505HP   KC5410 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.2000 .0080 2.8000 .1100
    4045134 CCGT060202HP CCGT21505HP   KCU10 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.2000 .0080 2.8000 .1100
      4050372 CCGT060202HP CCGT21505HP   KCU25 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.2000 .0080 2.8000 .1100
        1560389 CCGT060204HP CCGT2151HP   KC5410 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.4000 .0156 2.8000 .1100
          4045137 CCGT060204HP CCGT2151HP   KCU10 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.4000 .0156 2.8000 .1100
            4050403 CCGT060204HP CCGT2151HP   KCU25 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.4000 .0156 2.8000 .1100
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Inserti in metallo duro ISO

              Inserti Screw-on
              (27 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
              1807220 CCGT09T304LF CCGT3251LF   KC5410 9.5250 .3750 9.6700 .3810 3.9690 .1562 0.3970 .0156 4.4000 .1730
                1310718 CCGT060202LF CCGT21505LF   KC5010 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.2000 .0080 2.8000 .1100
                  1866566 CCGT060202LF CCGT21505LF   KC5025 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.2000 .0080 2.8000 .1100
                    1866596 CCGT060202LF CCGT21505LF   KC5410 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.2000 .0080 2.8000 .1100
                      1866610 CCGT060202LF CCGT21505LF   K313 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.2000 .0080 2.8000 .1100
                        1310721 CCGT060201LF CCGT2150LF   KC5010 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.1000 .0040 2.8000 .1100
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Inserti in metallo duro ISO

                          Inserti Kenloc™
                          (46 Products)
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
                          1785715 CNGP120401 CNGP430   KC5410 12.7000 .5000 12.8960 .5077 4.7620 .1875 0.1020 .0040 5.1560 .2030
                            1785716 CNGP120402 CNGP4305   KC5410 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.2000 .0080 5.1600 .2031
                              1785717 CNGP120404 CNGP431   KC5410 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.4000 .0156 5.1600 .2031
                                1785718 CNGP120408 CNGP432   KC5410 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.8000 .0312 5.1600 .2031
                                  1785719 CNGP120412 CNGP433   KC5410 12.7000 .5000 12.8960 .5077 4.7600 .1875 1.2000 .0468 5.1600 .2031
                                    1160833 CNGP090404 CNGP331   KC730 9.5250 .3750 9.6720 .3808 4.7600 .1875 0.4000 .0156 3.8100 .1500
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Inserti in metallo duro ISO

                                      Inserti Kenloc™
                                      (72 Products)
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
                                      3751944 CNMG090308FN CNMG322FN   KCK05 9.5250 .3750 9.6720 .3808 3.1800 .1250 0.8000 .0312 3.8100 .1500
                                        5523306 CNMG090308FN CNMG322FN   KCP10B 9.5250 .3750 9.6720 .3808 3.1800 .1250 0.8000 .0312 3.8100 .1500
                                          3751945 CNMG120404FN CNMG431FN   KCK05 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.4000 .0156 5.1600 .2031
                                            5531838 CNMG120404FN CNMG431FN   KCP25B 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.4000 .0156 5.1600 .2031
                                              5531836 CNMG120404FN CNMG431FN   KCP10B 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.4000 .0156 5.1600 .2031
                                                3751946 CNMG120408FN CNMG432FN   KCK05 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.8000 .0312 5.1600 .2031
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Punte modulari

                                                  KSEM PLUS™ • INSERTI PER TESTINE B1 • DFC™ Geometria DS
                                                  (10 Products)
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [LI] Insert Length [LI] Insert Length [W] Insert Width [W] Insert Width [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [Clearance Angle Major
                                                  6573276 DFC040310D28DS DFC040310D28DS   KCU25 10.0000 .3937 7.6000 .2992 2.8500 .1122 3.1800 .1250 1.0000 .0397 7.5000
                                                    6025895 DFC040310D28DS DFC040310D28DS   KCU40 10.0000 .3937 7.6000 .2992 2.8500 .1122 3.1800 .1250 1.0000 .0397 7.5000
                                                      6025896 DFC05T312D32DS DFC05T312D32DS   KCU40 12.0000 .4720 9.4000 .3700 3.4000 .1340 3.7500 .1480 1.2000 .0470 7.5000
                                                        6573277 DFC05T312D32DS DFC05T312D32DS   KCU25 12.0000 .4720 9.4000 .3700 3.4000 .1340 3.7500 .1480 1.2000 .0470 7.5000
                                                          6025897 DFC06T312D36DS DFC06T312D36DS   KCU40 16.0000 .6300 12.4000 .4880 4.4000 .1730 3.7500 .1480 1.2000 .0470 7.5000
                                                            6573278 DFC06T312D36DS DFC06T312D36DS   KCU25 16.0000 .6300 12.4000 .4880 4.4000 .1730 3.7500 .1480 1.2000 .0470 7.5000
                                                              List price:
                                                              Discount: %
                                                              Your price::
                                                              Replacement This item is not available
                                                              Replacement Product This item may be available through a distributor
                                                              Punte modulari

                                                              Teste B1 KSEM PLUS™ • Inserti Drill Fix™ DFC™ • Pattini di guida DPA
                                                              (10 Products)
                                                              View Products
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [LI] Insert Length [LI] Insert Length [W] Insert Width [W] Insert Width [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius
                                                              5118452 DFC040310D28HP DFC040310D28HP   KCU40 10.0000 .3937 7.6000 .2992 2.8500 .1122 3.1800 .1250 1.0000 .0397
                                                                5118327 DFC040310D28HP DFC040310D28HP   KCU25 10.0000 .3937 7.6000 .2992 2.8500 .1122 3.1800 .1250 1.0000 .0397
                                                                  5118453 DFC05T312D32HP DFC05T312D32HP   KCU40 12.0000 .4720 9.4000 .3700 3.4000 .1340 3.7500 .1480 1.2000 .0470
                                                                    5118328 DFC05T312D32HP DFC05T312D32HP   KCU25 12.0000 .4720 9.4000 .3700 3.4000 .1340 3.7500 .1480 1.2000 .0470
                                                                      5118454 DFC06T312D36HP DFC06T312D36HP   KCU40 16.0000 .6300 12.4000 .4880 4.4000 .1730 3.7500 .1480 1.2000 .0470
                                                                        5118329 DFC06T312D36HP DFC06T312D36HP   KCU25 16.0000 .6300 12.4000 .4880 4.4000 .1730 3.7500 .1480 1.2000 .0470
                                                                          List price:
                                                                          Discount: %
                                                                          Your price::
                                                                          Replacement This item is not available
                                                                          Replacement Product This item may be available through a distributor
                                                                          Punte modulari