successfully added to cart
View Cart

Notifications

Mark all as read
Read More

Scanalatura e troncatura

Beyond™ Evolution™

Beyond™ Evolution™ è il nuovo utensile per scanalatura e troncatura monotagliente in grado di eseguire anche operazioni di tornitura multidirezionale. La nuova sede a tripla V esclusiva di Beyond™ Evolution™ offre stabilità funzionale e vibrazioni ridotte al minimo.

Forma posteriore a V
Stabilità senza pari delle forze di taglio nelle applicazioni di scanalatura, troncatura e tornitura multidirezionale.

V superiore e inferiore
Posizionamento preciso e sicuro dell’inserto per una rigidità e una precisione dimensionale maggiore.

Part of FirstChoice Products

Tutti i prodotti del programma First Choice. 

Facile da selezionare, facile da ordinare, facile da applicare, prestazioni eccezionali. Scopri di più sul First Choice.

Effetto sulla rottura del truciolo

Effetto sulla rottura del truciolo

Miglioramento del controllo del truciolo in tutte le applicazioni di scanalatura, troncatura e tornitura multidirezionale.

Effetto ventola

Forma a tripla V

1. Forma posteriore a V - Stabilità del carico senza pari nelle applicazioni di scanalatura, troncatura e tornitura multidirezionale.

2. V superiore e inferiore - Posizionamento preciso e sicuro dell’inserto per una rigidità e una precisione dimensionale maggiore.

Effetto ventola

Effetto ventola

Fa passare il refrigerante attraverso la parte superiore dell’inserto, precisamente sulla zona di taglio al di sotto del truciolo controllando la temperatura.

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (352)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (352)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (352)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (352)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (352)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (352)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (352)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (352)
  • M Stainless Steel (304)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (304)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (304)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (304)
  • K Cast Iron (352)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (352)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (352)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (352)
  • N Non-Ferrous Materials (313)
    • N1
      Wrought Aluminum
      (313)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (304)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (313)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (304)
    • N6
      Carbon, Graphite Composites, CFRP
      (304)
  • S High-Temp Alloys (313)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (313)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (313)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (313)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (313)
  • H Hardened Materials (268)
    • H1
      Hardened Materials 44-48 HRC
      (268)
    • H2
      Hardened Materials 48-55 HRC
      (268)
Select First Choice
  • CN (69)
  • DE (69)
  • GB (39)
  • IN (3)
  • US (102)
Applications
Applications
  • Back Boring Back Boring (44)
  • CRT Profiling CRT Profiling (1)
  • Cut-Off Cut-Off (182)
  • Deep Grooving Deep Grooving (1)
  • Face Grooving Face Grooving (79)
  • Facing Facing (59)
  • Grooving Grooving (351)
  • ID Facing ID Facing (56)
  • ID Grooving ID Grooving (144)
  • Multiple Direction Cutting Multiple Direction Cutting (53)
  • Plunge Turning Plunge Turning (136)
  • Profiling Profiling (51)
  • Turning Turning (99)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (281)
  • Lightly Interrupted Cut (327)
  • Smooth Cut (361)
  • Varying Depth of Cut (328)
Connection Style
Connection Style
  • Boring Bar Shank (52)
  • Toolholder (148)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (127)
  • 1.0 (200)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (1)
  • 0.039 in (2)
  • 0.041 in (7)
  • 0.047 in (5)
  • 0.06 in (3)
  • 0.061 in (9)
  • 0.063 in (6)
  • 0.065 in (7)
  • 0.079 in (3)
  • 0.081 in (9)
  • 0.094 in (6)
  • 0.096 in (8)
  • 0.098 in (3)
  • 0.1 in (9)
  • 0.119 in (3)
  • 0.12 in (9)
  • 0.125 in (8)
  • 0.128 in (5)
  • 0.156 in (7)
  • 0.157 in (3)
  • 0.158 in (5)
  • 0.159 in (9)
  • 0.2 in (144)
  • 0.203 in (38)
  • 0.3 in (64)
  • 0.4 in (160)
  • 0.79 in (40)
  • 0.794 in (40)
  • 0.8 in (122)
  • 1.0 in (52)
  • 1.06 in (52)
  • 1.18 in (18)
  • 1.19 in (78)
  • 1.2 in (26)
  • 1.5 in (38)
  • 1.56 in (38)
  • 1.59 in (38)
  • 1.65 in (38)
  • 2.0 in (40)
  • 2.06 in (40)
  • 2.37 in (40)
  • 2.38 in (40)
  • 2.44 in (40)
  • 2.5 in (32)
  • 2.56 in (32)
  • 3.0 in (32)
  • 3.06 in (32)
  • 3.17 in (32)
  • 3.24 in (32)
  • 3.96 in (18)
  • 4.0 in (18)
  • 4.03 in (18)
  • 4.06 in (18)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (144)
  • 0.203 mm (38)
  • 0.3 mm (64)
  • 0.4 mm (160)
  • 0.79 mm (40)
  • 0.794 mm (40)
  • 0.8 mm (123)
  • 1.0 mm (54)
  • 1.05 mm (7)
  • 1.06 mm (52)
  • 1.18 mm (18)
  • 1.19 mm (78)
  • 1.2 mm (26)
  • 1.201 mm (5)
  • 1.5 mm (41)
  • 1.55 mm (9)
  • 1.56 mm (38)
  • 1.59 mm (38)
  • 1.6 mm (6)
  • 1.65 mm (38)
  • 1.651 mm (7)
  • 2.0 mm (43)
  • 2.051 mm (9)
  • 2.06 mm (40)
  • 2.37 mm (40)
  • 2.375 mm (6)
  • 2.38 mm (40)
  • 2.44 mm (40)
  • 2.45 mm (8)
  • 2.5 mm (35)
  • 2.551 mm (9)
  • 2.56 mm (32)
  • 3.0 mm (35)
  • 3.051 mm (9)
  • 3.06 mm (32)
  • 3.17 mm (32)
  • 3.176 mm (8)
  • 3.24 mm (32)
  • 3.25 mm (5)
  • 3.95 mm (7)
  • 3.96 mm (18)
  • 4.0 mm (21)
  • 4.025 mm (5)
  • 4.03 mm (18)
  • 4.05 mm (9)
  • 4.06 mm (18)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (161)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (161)
Corner Chamfer Min to Corner Chamfer Max
application
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (47)
  • Lightly Interrupted Cut (93)
  • Smooth Cut (127)
  • Varying Depth of Cut (94)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (243)
  • KCK20B (243)
  • KCM35B (162)
  • KCP10B (251)
  • KCP25B (256)
  • KCU10 (268)
  • KCU25 (270)
Hand Of Tool
Hand Of Tool
  • L (100)
  • R (100)
Wiper Insert
Wiper Insert
  • N (327)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 15.875 mm (4)
  • 16.0 mm (4)
  • 20.0 mm (12)
  • 25.0 mm (10)
  • 25.401 mm (2)
  • 31.75 mm (6)
  • 32.0 mm (6)
  • 38.1 mm (4)
  • 40.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.625 in (4)
  • 0.63 in (4)
  • 0.787 in (12)
  • 0.984 in (10)
  • 1.0 in (2)
  • 1.25 in (6)
  • 1.26 in (6)
  • 1.5 in (4)
  • 1.575 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Countersunk Angle
Countersunk Angle
  • 0.0 (1)
Countersunk Angle Min to Countersunk Angle Max
Cutting Direction
Cutting Direction
  • E (169)
  • S (31)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (34)
  • NEUTRAL (ZERO) (18)
  • POSITIVE-ZERO (40)
Maximum Bore Depth
Maximum Bore Depth
  • 0.946 in (4)
  • 1.0 in (4)
  • 1.25 in (6)
  • 1.26 in (4)
  • 1.5 in (6)
  • 1.575 in (4)
  • 1.586 in (2)
  • 1.587 in (2)
  • 1.969 in (2)
  • 1.98 in (4)
  • 2.0 in (7)
  • 2.496 in (2)
  • 2.5 in (1)
  • 2.52 in (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 24.0 mm (4)
  • 25.401 mm (4)
  • 31.75 mm (6)
  • 32.0 mm (4)
  • 38.1 mm (6)
  • 40.0 mm (4)
  • 40.276 mm (2)
  • 40.301 mm (2)
  • 50.0 mm (2)
  • 50.301 mm (4)
  • 50.801 mm (7)
  • 63.401 mm (2)
  • 63.5 mm (1)
  • 64.0 mm (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (28)
frontEnd
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (76)
Clamp Style
Clamp Style
  • Y (214)
Cutting Width
Cutting Width
  • 0.079 in (2)
  • 0.084 in (7)
  • 0.094 in (5)
  • 0.119 in (3)
  • 0.123 in (9)
  • 0.125 in (6)
  • 0.13 in (7)
  • 0.157 in (3)
  • 0.162 in (9)
  • 0.187 in (6)
  • 0.192 in (8)
  • 0.197 in (3)
  • 0.202 in (9)
  • 0.237 in (3)
  • 0.241 in (9)
  • 0.25 in (8)
  • 0.255 in (5)
  • 0.289 in (1)
  • 0.312 in (7)
  • 0.315 in (3)
  • 0.317 in (5)
  • 0.32 in (9)
  • 1.6 in (14)
  • 2.0 in (52)
  • 2.12 in (52)
  • 2.125 in (52)
  • 2.387 in (52)
  • 2.388 in (52)
  • 2.51 in (52)
  • 2.511 in (52)
  • 3.0 in (38)
  • 3.125 in (38)
  • 3.175 in (38)
  • 3.177 in (38)
  • 3.3 in (38)
  • 3.301 in (38)
  • 3.302 in (38)
  • 4.0 in (40)
  • 4.094 in (38)
  • 4.125 in (40)
  • 4.75 in (40)
  • 4.76 in (40)
  • 4.762 in (40)
  • 4.763 in (40)
  • 4.873 in (40)
  • 4.877 in (40)
  • 4.878 in (40)
  • 5.0 in (32)
  • 5.125 in (32)
  • 6.0 in (32)
  • 6.125 in (32)
  • 6.346 in (32)
  • 6.35 in (32)
  • 6.473 in (32)
  • 6.477 in (32)
  • 6.478 in (32)
  • 7.0 in (32)
  • 7.125 in (32)
  • 7.317 in (32)
  • 7.92 in (18)
  • 7.925 in (18)
  • 8.0 in (18)
  • 8.051 in (18)
  • 8.052 in (18)
  • 8.125 in (18)
  • 9.525 in (8)
  • 9.651 in (8)
  • 10.0 in (8)
  • 10.125 in (8)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.6 mm (14)
  • 2.0 mm (54)
  • 2.12 mm (52)
  • 2.125 mm (59)
  • 2.375 mm (5)
  • 2.387 mm (52)
  • 2.388 mm (52)
  • 2.51 mm (52)
  • 2.511 mm (52)
  • 3.0 mm (41)
  • 3.125 mm (47)
  • 3.175 mm (38)
  • 3.176 mm (6)
  • 3.177 mm (38)
  • 3.3 mm (38)
  • 3.301 mm (45)
  • 3.302 mm (38)
  • 4.0 mm (43)
  • 4.094 mm (38)
  • 4.125 mm (49)
  • 4.75 mm (46)
  • 4.76 mm (40)
  • 4.762 mm (40)
  • 4.763 mm (40)
  • 4.873 mm (40)
  • 4.875 mm (8)
  • 4.877 mm (40)
  • 4.878 mm (40)
  • 5.0 mm (35)
  • 5.125 mm (41)
  • 6.0 mm (35)
  • 6.125 mm (41)
  • 6.346 mm (32)
  • 6.35 mm (32)
  • 6.351 mm (8)
  • 6.473 mm (32)
  • 6.476 mm (5)
  • 6.477 mm (32)
  • 6.478 mm (32)
  • 7.0 mm (32)
  • 7.125 mm (32)
  • 7.317 mm (32)
  • 7.325 mm (1)
  • 7.92 mm (18)
  • 7.925 mm (18)
  • 7.926 mm (7)
  • 8.0 mm (21)
  • 8.05 mm (5)
  • 8.051 mm (18)
  • 8.052 mm (18)
  • 8.125 mm (27)
  • 9.525 mm (8)
  • 9.651 mm (8)
  • 10.0 mm (8)
  • 10.125 mm (8)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • MCS - Modular Cartridge System (76)
Insert Shape
Insert Shape
  • PRISMATIC (361)
Cartridge Size
Cartridge Size
  • 0 (34)
Front End Style
Front End Style
  • MCS01 Modular Deep Grooving (76)
Insert Size
Insert Size
  • 0 (188)
  • 1F (12)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.197 in (8)
  • 0.276 in (24)
  • 0.394 in (12)
  • 0.473 in (18)
  • 0.63 in (60)
  • 0.866 in (27)
  • 1.024 in (49)
  • 1.26 in (24)
  • 1.575 in (12)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.0 mm (8)
  • 7.0 mm (24)
  • 10.0 mm (12)
  • 12.0 mm (18)
  • 16.0 mm (60)
  • 22.0 mm (27)
  • 26.0 mm (49)
  • 32.0 mm (24)
  • 40.0 mm (12)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 6 in (4)
  • 7 in (2)
  • 1.102 in (2)
  • 1.299 in (2)
  • 1.496 in (2)
  • 1.693 in (2)
  • 1.85 in (6)
  • 1.891 in (6)
  • 1.929 in (4)
  • 2.106 in (4)
  • 2.185 in (2)
  • 2.244 in (6)
  • 2.283 in (6)
  • 2.303 in (6)
  • 2.382 in (2)
  • 2.5 in (12)
  • 2.579 in (2)
  • 2.618 in (4)
  • 2.697 in (4)
  • 2.894 in (4)
  • 5.439 in (2)
  • 5.463 in (2)
  • 5.482 in (2)
  • 5.508 in (6)
  • 5.529 in (6)
  • 5.533 in (4)
  • 5.906 in (2)
  • 6.226 in (2)
  • 6.25 in (2)
  • 6.271 in (2)
  • 6.533 in (2)
  • 6.694 in (2)
Gage Length
Gage Length
  • 47 mm (6)
  • 48 mm (6)
  • 57 mm (6)
  • 58 mm (6)
  • 49 mm (4)
  • 150 mm (2)
  • 170 mm (2)
  • 28 mm (2)
  • 33 mm (2)
  • 38 mm (2)
  • 43 mm (2)
  • 53.5 mm (4)
  • 55.5 mm (2)
  • 58.5 mm (6)
  • 60.5 mm (2)
  • 63.5 mm (12)
  • 65.5 mm (2)
  • 66.5 mm (4)
  • 68.5 mm (4)
  • 73.5 mm (4)
  • 138.15 mm (2)
  • 138.75 mm (2)
  • 139.25 mm (2)
  • 139.9 mm (6)
  • 140.4 mm (6)
  • 140.55 mm (4)
  • 152.4 mm (4)
  • 158.15 mm (2)
  • 158.75 mm (2)
  • 159.25 mm (2)
  • 165.951 mm (2)
  • 177.8 mm (2)
insertGeometry
Shape
Shape
  • PRISMATIC (127)
Insert Seat Size
Insert Seat Size
  • 0 (127)
Cutting Edge Length
Cutting Edge Length
  • 0.426 mm (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.419 in (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Tool Material
Cutting Tool Material
  • H W (361)
backEnd
Connection Type
Connection Type
  • BORING BAR (52)
  • SQUARE SHANK (148)
System Size
System Size
  • KM40TS (4)
  • KM4X63 (4)
  • KM50TS (8)
  • KM63TS (8)
  • KM63XMZ (8)
  • KM80ATC (8)
  • KM80TS (8)
  • PSC40 (4)
  • PSC50 (8)
  • PSC63 (8)
  • PSC80 (8)
Back-End Diameter
Back-End Diameter
  • 12.0 mm (4)
  • 12.701 mm (4)
  • 15.875 mm (6)
  • 16.0 mm (6)
  • 19.05 mm (6)
  • 20.0 mm (6)
  • 25.0 mm (6)
  • 25.401 mm (6)
  • 31.701 mm (1)
  • 31.75 mm (3)
  • 32.0 mm (4)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (4)
  • 0.5 in (4)
  • 0.625 in (6)
  • 0.63 in (6)
  • 0.75 in (6)
  • 0.787 in (6)
  • 0.984 in (6)
  • 1.0 in (6)
  • 1.248 in (1)
  • 1.25 in (3)
  • 1.26 in (4)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Insert Size [W] Cutting Width [W] Cutting Width Cuttg Width (+/-) Tolerance Cuttg Width (+/-) Tolerance [RC] Corner Radius Center [RC] Corner Radius Center [LI] Insert Length [LI] Insert Length
6012720 ER0300M03P00GUP ER0300M03P00GUP KCU10   3 3.0000 .1180 0.025000 .0010 1.5000 .0590 9.5000 .3760
    List price:
    $17.28 /each.
    Your price::
    Qty
    6012721 ER0400M04P00GUP ER0400M04P00GUP KCU10 4 4.0000 .1570 0.025000 .0010 2.0000 .0790 10.1000 .3990  
      List price:
      $17.54 /each.
      Your price::
      Qty
      6012722 ER0500M05P00GUP ER0500M05P00GUP KCU10 5 5.0000 .1970 0.025000 .0010 2.5000 .0980 12.2000 .4800  
        List price:
        $19.59 /each.
        Your price::
        Qty
        6012723 ER0600M06P00GUP ER0600M06P00GUP KCU10 6 6.0000 .2360 0.025000 .0010 3.0000 .1180 14.5000 .5720  
          List price:
          $22.05 /each.
          Your price::
          Qty
          5988783 ER0600M06P00GUP ER0600M06P00GUP KCU25 6 6.0000 .2360 0.025000 .0010 3.0000 .1180 14.5000 .5720  
            List price:
            $22.05 /each.
            Your price::
            Qty
            6012724 ER0800M08P00GUP ER0800M08P00GUP KCU10 8 8.0000 .3150 0.025000 .0010 4.0000 .1570 17.4000 .6850  
              List price:
              $24.02 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Scanalatura e troncatura

              Scanalatura e troncatura • Inserto in metallo duro
              (23 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Insert Size [W] Cutting Width [W] Cutting Width Cuttg Width (+/-) Tolerance Cuttg Width (+/-) Tolerance [RC] Corner Radius Center [RC] Corner Radius Center [LI] Insert Length [LI] Insert Length
              5534274 ER0312M03U00GUP ER0312M03U00GUP KCU25 3 3.1250