Forza, coppia e potenza

Calcolare la forza tangenziale, la coppia e la potenza nelle applicazioni di scanalatura.

These calculations are based upon theoretical values and are only intended for planning purposes. Actual results will vary. No responsibility from Kennametal is assumed.

Conversion of Workpiece Material Rockwell (Optional)
Metric
Inch

Conversion of Workpiece Material Rockwell (Optional)

Skip this step if you already know the Brinell hardness number(HB)
Characteristics of Workpiece Materials

Characteristics of Workpiece Materials

HB
PSI N/mm 2
Note:Ultimate Strength shown for generic steel. Please enter the actual value of your workpiece material if available&#44 for better accuracy You may look up this info through websites such as www.matweb.com
Slot Mill Nomenclature

Slot Mill Nomenclature

in. mm
Machining Conditions

Machining Conditions

sfm m/mm
in. (WOC) mm (WOC)
in. (DOC) mm. (DOC)
in. IPT (chip load) mm
Most Common Workpiece Materials W/D ratios
W/D < = 0.66 0.66 < W/D < 1.0 W/D = 1.0
Aluminum alloys 1.0 1.05 1.1
Carbon and alloy steels 1.0 1.15 1.3
Cast irons 1.0 1.15 1.3
Titanium alloys 1.0 1.20 1.4
Stainless steel&#44 High-temperature alloys 2.0 2.15 2.3
Direct Belt Drive .9
Back Gear Drive .75
Geared Head Drive .7-.8
Oil - Hydraulic Drive .6-.9
Calculated Machining Conditions

Calculated Machining Conditions

RPM
IPM (no productivity formula) mm/min (no productivity formula)
in. (chip load at the cut) mm/min (chip load at the cut)
IPM (with productivity formula) mm/min (with productivity formula)
MRR cm3/min
MRR(no productivity formula) cm3/min(no productivity formula)
in.2 mm2
Calculated Force&#44 Torque&#44 and Required Power

Calculated Force&#44 Torque&#44 and Required Power

in -lb N
in ft -lb N-cm N-m
Machining Power

Machining Power

HPc kW
hp kW
Si sta per aggiungere alla pagina Le mie soluzioni. Continuare?
product-image
Please adjust the following properties from

ISO Catalogo

ANSI Catalogo

to find similar products.

Models

Per visualizzare le informazioni sul dashboard è necessario eseguire l’accesso
Session expired due to inactivity, please login again
Il prodotto/prodotti () che si sta/stanno tentando di aggiungere al carrello non è/sono disponibile/i contattare il Servizio clienti.
articolo/i aggiunto/i correttamente al carrello
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalogo Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Grazie per la tua registrazione avvennuta con successo. Ora puoi immediatamente effettuare il log in e iniziare ad utilizzare il nuovo sito.

You are about to leave the Solution building process.

Are you sure you want to leave?