successfully added to cart
View Cart

Notifications

Mark all as read

Tech Tip #37 - Regrinding Coated Tools

Typically when drills or end mills are resharpened, the coating is removed only from the clearance or flank area of the tool. When resharpened this way, there is still coating protection on the rake face of the tool. Tool life typically decreases by 30% or more but is still much better than an uncoated tool.

If the regrind process removes the coating from the rake face, the tool will perform no better than an uncoated tool.

As a general rule, tools should be recoated after resharpening to restore the full protective effect of the coating.

If good metal removal rates are the goal for a reground, not recoated tool, then speeds and feeds can be left very close to coated-tool parameters.

If maintaining tool life is the goal, then reduce speeds and feeds by 20% to 30% to achieve results close to those of coated-tool life.

Additionally, after multiple recoats, drills, reamers, and other close-tolerance tools can become oversized due to the layering effect of the multiple coatings. In these cases the tools can be stripped, resharpened, and recoated to restore the tool to original specifications.

product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.
If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
You are about to create a duplicate . Do you want to proceed?
You are about to delete Do you want to proceed?
What would you like to rename your to?
Please enter a valid name
Please enter a name for the duplicate
Please enter a valid name
You are about to add to your My Solutions page. Do you want to proceed?
Please enter a valid name
Send a copy of

Please enter a valid Email
Please enter a valid name

We have found the following CAD Drawings

Select the files you are looking for and download them all at once

You should be logged to see your dashboard information
The product/s () you were trying to add to the cart is/are not available, please contact customer service.
item(s) successfully added to the cart
View Cart