欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车

Drill Fix DFT Bodies

选择筛选器
筛选器
筛选器
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (272)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (272)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (272)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS (272)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS (272)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS (272)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS (272)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS (272)
  • M 不锈钢 (272)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS (272)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS (272)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS (272)
  • K 铸铁 (272)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS (272)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS (272)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS (272)
  • N 非铁金属材料 (272)
    • N1
      铝型材 (272)
    • N2
      低硅铝合金和镁合金 硅 < 12.2% (272)
    • N3
      高硅铝合金 硅 > 12.2% (272)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基 (272)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维 (272)
    • N6
      碳、石墨复合材料、CFRP (272)
    • N7
      MMC (272)
  • S 高温合金 (272)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS (272)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS (272)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS (272)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS (272)
  • H 淬火材料 (251)
    • H1
      淬火材料 44-48 HRC (251)
    • H2
      淬火材料 48-55 HRC (251)
    • H3
      淬火材料 56-60 HRC (251)
    • H4
      淬火材料 >60 HRC (251)
选择 First Choice
  • US (94)
应用
应用
  • Convex Drilling Convex Drilling (247)
  • Drilling Drilling (249)
  • Inclined Entry Drilling Inclined Entry Drilling (247)
  • Inclined Exit Drilling Inclined Exit Drilling (247)
  • X-Offset Drilling X-Offset Drilling (249)
切削直径
切削直径
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.656 in (3)
  • 0.669 in (2)
  • 0.687 in (2)
  • 0.689 in (1)
  • 0.704 in (3)
  • 0.709 in (2)
  • 0.734 in (3)
  • 0.748 in (3)
  • 0.75 in (5)
  • 0.781 in (2)
  • 0.787 in (3)
  • 0.814 in (3)
  • 0.828 in (3)
  • 0.845 in (2)
  • 0.866 in (3)
  • 0.875 in (5)
  • 0.906 in (6)
  • 0.937 in (2)
  • 0.939 in (1)
  • 0.946 in (2)
  • 0.969 in (3)
  • 0.984 in (7)
  • 1.0 in (6)
  • 1.024 in (4)
  • 1.031 in (1)
  • 1.032 in (1)
  • 1.063 in (6)
  • 1.094 in (2)
  • 1.102 in (4)
  • 1.125 in (3)
  • 1.143 in (4)
  • 1.156 in (2)
  • 1.181 in (4)
  • 1.187 in (1)
  • 1.188 in (1)
  • 1.219 in (3)
  • 1.22 in (4)
  • 1.25 in (4)
  • 1.26 in (4)
  • 1.281 in (1)
  • 1.282 in (1)
  • 1.299 in (3)
  • 1.313 in (3)
  • 1.339 in (3)
  • 1.375 in (4)
  • 1.379 in (3)
  • 1.407 in (2)
  • 1.417 in (3)
  • 1.437 in (2)
  • 1.438 in (2)
  • 1.457 in (3)
  • 1.469 in (3)
  • 1.496 in (3)
  • 1.5 in (4)
  • 1.532 in (4)
  • 1.536 in (3)
  • 1.563 in (4)
  • 1.575 in (3)
  • 1.614 in (3)
  • 1.625 in (4)
  • 1.655 in (3)
  • 1.687 in (2)
  • 1.688 in (2)
  • 1.693 in (3)
  • 1.732 in (3)
  • 1.75 in (2)
  • 1.772 in (3)
  • 1.811 in (3)
  • 1.813 in (2)
  • 1.85 in (2)
  • 1.875 in (2)
  • 1.891 in (3)
  • 1.929 in (2)
  • 1.937 in (1)
  • 1.938 in (1)
  • 1.969 in (2)
  • 2.0 in (4)
  • 2.008 in (2)
  • 2.047 in (2)
  • 2.087 in (2)
  • 2.125 in (4)
  • 2.126 in (2)
  • 2.165 in (1)
  • 2.205 in (1)
  • 2.244 in (1)
  • 2.25 in (1)
  • 2.283 in (1)
  • 2.323 in (1)
  • 2.362 in (1)
  • 2.375 in (1)
  • 2.402 in (1)
  • 2.441 in (1)
  • 2.48 in (1)
  • 2.5 in (1)
  • 2.52 in (1)
  • 2.559 in (1)
  • 2.598 in (1)
  • 2.638 in (1)
  • 2.677 in (1)
  • 2.717 in (1)
  • 2.75 in (1)
  • 2.757 in (1)
  • 2.795 in (1)
  • 2.835 in (1)
  • 2.874 in (1)
  • 2.914 in (1)
  • 2.953 in (1)
  • 2.992 in (1)
  • 3.0 in (1)
  • 3.031 in (1)
  • 3.071 in (1)
  • 3.11 in (1)
  • 3.15 in (1)
  • 3.189 in (1)
  • 3.228 in (1)
  • 3.25 in (1)
切削直径 Min 到 切削直径 Max
切削直径
切削直径
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 16.651 mm (3)
  • 17.0 mm (2)
  • 17.45 mm (2)
  • 17.475 mm (1)
  • 17.85 mm (3)
  • 18.0 mm (2)
  • 18.651 mm (3)
  • 19.0 mm (3)
  • 19.05 mm (5)
  • 19.826 mm (1)
  • 19.85 mm (1)
  • 20.0 mm (3)
  • 20.651 mm (3)
  • 21.0 mm (3)
  • 21.451 mm (2)
  • 22.0 mm (3)
  • 22.225 mm (5)
  • 23.0 mm (6)
  • 23.8 mm (2)
  • 23.826 mm (1)
  • 24.0 mm (2)
  • 24.625 mm (3)
  • 25.0 mm (7)
  • 25.401 mm (6)
  • 26.0 mm (4)
  • 26.175 mm (1)
  • 26.201 mm (1)
  • 27.0 mm (6)
  • 27.8 mm (2)
  • 28.0 mm (4)
  • 28.576 mm (3)
  • 29.0 mm (4)
  • 29.35 mm (2)
  • 30.0 mm (4)
  • 30.151 mm (1)
  • 30.175 mm (1)
  • 30.951 mm (2)
  • 30.975 mm (1)
  • 31.0 mm (4)
  • 31.75 mm (4)
  • 32.0 mm (4)
  • 32.525 mm (1)
  • 32.551 mm (1)
  • 33.0 mm (3)
  • 33.35 mm (3)
  • 34.0 mm (3)
  • 34.926 mm (4)
  • 35.0 mm (3)
  • 35.7 mm (2)
  • 36.0 mm (3)
  • 36.5 mm (2)
  • 36.525 mm (2)
  • 37.0 mm (3)
  • 37.301 mm (2)
  • 37.325 mm (1)
  • 38.0 mm (3)
  • 38.1 mm (4)
  • 38.875 mm (4)
  • 39.0 mm (3)
  • 39.7 mm (4)
  • 40.0 mm (3)
  • 41.0 mm (3)
  • 41.276 mm (4)
  • 42.0 mm (3)
  • 42.85 mm (2)
  • 42.875 mm (2)
  • 43.0 mm (3)
  • 44.0 mm (3)
  • 44.45 mm (2)
  • 45.0 mm (3)
  • 46.0 mm (3)
  • 46.051 mm (2)
  • 47.0 mm (2)
  • 47.625 mm (2)
  • 48.0 mm (3)
  • 49.0 mm (2)
  • 49.2 mm (1)
  • 49.225 mm (1)
  • 50.0 mm (2)
  • 50.801 mm (4)
  • 51.0 mm (2)
  • 52.0 mm (2)
  • 53.0 mm (2)
  • 53.975 mm (4)
  • 54.0 mm (2)
  • 55.0 mm (1)
  • 56.0 mm (1)
  • 57.0 mm (1)
  • 57.151 mm (1)
  • 58.0 mm (1)
  • 59.0 mm (1)
  • 60.0 mm (1)
  • 60.325 mm (1)
  • 61.0 mm (1)
  • 62.0 mm (1)
  • 63.0 mm (1)
  • 63.5 mm (1)
  • 64.0 mm (1)
  • 65.0 mm (1)
  • 66.0 mm (1)
  • 67.0 mm (1)
  • 68.0 mm (1)
  • 69.0 mm (1)
  • 69.851 mm (1)
  • 70.0 mm (1)
  • 71.0 mm (1)
  • 72.0 mm (1)
  • 73.0 mm (1)
  • 74.0 mm (1)
  • 75.0 mm (1)
  • 76.0 mm (1)
  • 76.2 mm (1)
  • 77.0 mm (1)
  • 78.0 mm (1)
  • 79.0 mm (1)
  • 80.0 mm (1)
  • 81.0 mm (1)
  • 82.0 mm (1)
  • 82.551 mm (1)
切削直径 Min 到 切削直径 Max
最大孔深
最大孔深
  • 38.401 mm (6)
  • 40.651 mm (2)
  • 41.651 mm (2)
  • 44.45 mm (2)
  • 44.7 mm (2)
  • 46.6 mm (2)
  • 47.625 mm (2)
  • 48.5 mm (3)
  • 48.7 mm (3)
  • 48.901 mm (6)
  • 49.0 mm (2)
  • 49.776 mm (1)
  • 51.551 mm (2)
  • 53.6 mm (1)
  • 55.575 mm (3)
  • 57.526 mm (2)
  • 58.901 mm (2)
  • 59.1 mm (4)
  • 59.7 mm (2)
  • 60.95 mm (2)
  • 63.5 mm (6)
  • 66.05 mm (1)
  • 66.101 mm (2)
  • 66.3 mm (4)
  • 66.675 mm (1)
  • 67.3 mm (1)
  • 68.575 mm (1)
  • 69.851 mm (1)
  • 71.425 mm (1)
  • 72.4 mm (1)
  • 73.4 mm (1)
  • 74.625 mm (1)
  • 76.2 mm (4)
  • 76.4 mm (6)
  • 76.5 mm (4)
  • 76.601 mm (2)
  • 76.801 mm (2)
  • 77.476 mm (2)
  • 79.375 mm (1)
  • 79.5 mm (2)
  • 81.275 mm (1)
  • 82.551 mm (1)
  • 83.825 mm (2)
  • 85.726 mm (1)
  • 87.625 mm (2)
  • 88.0 mm (1)
  • 88.9 mm (4)
  • 91.45 mm (2)
  • 92.075 mm (1)
  • 93.976 mm (2)
  • 95.25 mm (3)
  • 96.7 mm (2)
  • 96.801 mm (2)
  • 96.9 mm (6)
  • 97.0 mm (2)
  • 97.801 mm (2)
  • 98.426 mm (1)
  • 99.051 mm (2)
  • 100.0 mm (2)
  • 100.025 mm (1)
  • 101.601 mm (3)
  • 104.0 mm (2)
  • 104.15 mm (2)
  • 104.775 mm (1)
  • 107.95 mm (3)
  • 108.0 mm (2)
  • 111.0 mm (2)
  • 111.125 mm (1)
  • 111.25 mm (1)
  • 111.5 mm (1)
  • 112.0 mm (4)
  • 112.101 mm (4)
  • 112.2 mm (2)
  • 114.301 mm (2)
  • 115.575 mm (1)
  • 116.0 mm (2)
  • 117.2 mm (4)
  • 117.4 mm (2)
  • 117.476 mm (1)
  • 117.5 mm (2)
  • 117.601 mm (2)
  • 117.7 mm (2)
  • 119.375 mm (1)
  • 120.0 mm (2)
  • 120.65 mm (1)
  • 123.2 mm (1)
  • 123.825 mm (1)
  • 124.0 mm (2)
  • 125.0 mm (14)
  • 127.0 mm (4)
  • 128.0 mm (2)
  • 130.175 mm (1)
  • 132.0 mm (1)
  • 133.35 mm (1)
  • 135.9 mm (2)
  • 136.0 mm (1)
  • 139.701 mm (2)
  • 140.0 mm (15)
  • 143.0 mm (1)
  • 144.0 mm (1)
  • 146.05 mm (2)
  • 148.0 mm (1)
  • 149.225 mm (1)
  • 151.125 mm (1)
  • 152.0 mm (1)
  • 152.4 mm (2)
  • 155.576 mm (2)
  • 156.0 mm (1)
  • 158.75 mm (3)
  • 160.0 mm (1)
  • 164.0 mm (1)
  • 165.101 mm (2)
  • 168.0 mm (1)
  • 171.451 mm (2)
  • 172.0 mm (1)
  • 174.625 mm (1)
  • 176.0 mm (1)
  • 177.8 mm (1)
  • 180.0 mm (1)
  • 184.0 mm (1)
  • 184.15 mm (1)
  • 188.0 mm (1)
  • 190.5 mm (2)
  • 192.0 mm (1)
  • 196.851 mm (1)
  • 203.201 mm (2)
  • 206.5 mm (1)
  • 215.9 mm (2)
最大孔深 Min 到 最大孔深 Max
最大孔深
最大孔深
  • 1.512 in (6)
  • 1.6 in (2)
  • 1.641 in (2)
  • 1.75 in (2)
  • 1.76 in (2)
  • 1.835 in (2)
  • 1.875 in (2)
  • 1.909 in (3)
  • 1.917 in (3)
  • 1.925 in (6)
  • 1.929 in (2)
  • 1.96 in (1)
  • 2.031 in (2)
  • 2.11 in (1)
  • 2.188 in (3)
  • 2.265 in (2)
  • 2.319 in (2)
  • 2.327 in (4)
  • 2.35 in (2)
  • 2.4 in (2)
  • 2.5 in (6)
  • 2.6 in (1)
  • 2.602 in (2)
  • 2.61 in (4)
  • 2.625 in (1)
  • 2.65 in (1)
  • 2.7 in (1)
  • 2.75 in (1)
  • 2.813 in (1)
  • 2.85 in (1)
  • 2.89 in (1)
  • 2.938 in (1)
  • 3.0 in (4)
  • 3.008 in (6)
  • 3.012 in (4)
  • 3.016 in (2)
  • 3.024 in (2)
  • 3.051 in (2)
  • 3.125 in (1)
  • 3.13 in (2)
  • 3.2 in (1)
  • 3.25 in (1)
  • 3.301 in (2)
  • 3.375 in (1)
  • 3.45 in (2)
  • 3.465 in (1)
  • 3.5 in (4)
  • 3.6 in (2)
  • 3.625 in (1)
  • 3.7 in (2)
  • 3.75 in (3)
  • 3.807 in (2)
  • 3.811 in (2)
  • 3.815 in (6)
  • 3.819 in (2)
  • 3.85 in (2)
  • 3.875 in (1)
  • 3.9 in (2)
  • 3.938 in (3)
  • 4.0 in (3)
  • 4.094 in (2)
  • 4.1 in (2)
  • 4.125 in (1)
  • 4.25 in (3)
  • 4.252 in (2)
  • 4.37 in (2)
  • 4.375 in (1)
  • 4.38 in (1)
  • 4.39 in (1)
  • 4.409 in (4)
  • 4.413 in (4)
  • 4.417 in (2)
  • 4.5 in (2)
  • 4.55 in (1)
  • 4.567 in (2)
  • 4.614 in (4)
  • 4.622 in (2)
  • 4.625 in (1)
  • 4.626 in (2)
  • 4.63 in (2)
  • 4.634 in (2)
  • 4.7 in (1)
  • 4.724 in (2)
  • 4.75 in (1)
  • 4.851 in (1)
  • 4.875 in (1)
  • 4.882 in (2)
  • 4.921 in (14)
  • 5.0 in (4)
  • 5.039 in (2)
  • 5.125 in (1)
  • 5.197 in (1)
  • 5.25 in (1)
  • 5.351 in (2)
  • 5.354 in (1)
  • 5.5 in (2)
  • 5.513 in (15)
  • 5.63 in (1)
  • 5.67 in (1)
  • 5.75 in (2)
  • 5.827 in (1)
  • 5.875 in (1)
  • 5.95 in (1)
  • 5.984 in (1)
  • 6.0 in (2)
  • 6.125 in (2)
  • 6.142 in (1)
  • 6.25 in (3)
  • 6.299 in (1)
  • 6.457 in (1)
  • 6.5 in (2)
  • 6.614 in (1)
  • 6.75 in (2)
  • 6.772 in (1)
  • 6.875 in (1)
  • 6.929 in (1)
  • 7.0 in (1)
  • 7.087 in (1)
  • 7.244 in (1)
  • 7.25 in (1)
  • 7.402 in (1)
  • 7.5 in (2)
  • 7.559 in (1)
  • 7.75 in (1)
  • 8.0 in (2)
  • 8.13 in (1)
  • 8.5 in (2)
最大孔深 Min 到 最大孔深 Max
范围
范围
  • 0.787 in (1)
  • 0.828 in (1)
  • 1.85 in (5)
  • 1.891 in (1)
  • 2.126 in (8)
  • 2.244 in (14)
  • 2.362 in (3)
  • 2.48 in (3)
  • 2.717 in (5)
  • 2.835 in (6)
  • 2.874 in (4)
  • 2.992 in (2)
  • 3.031 in (2)
  • 3.11 in (4)
  • 3.228 in (8)
  • 3.386 in (3)
  • 3.465 in (2)
  • 3.622 in (1)
  • 3.661 in (2)
  • 3.74 in (2)
  • 3.819 in (14)
  • 3.858 in (3)
  • 3.976 in (2)
  • 4.016 in (1)
  • 4.134 in (2)
  • 4.173 in (1)
  • 4.213 in (4)
  • 4.291 in (2)
  • 4.37 in (2)
  • 4.488 in (2)
  • 4.529 in (2)
  • 4.606 in (18)
  • 4.724 in (2)
  • 4.764 in (4)
  • 4.882 in (1)
  • 4.921 in (4)
  • 5.0 in (2)
  • 5.039 in (3)
  • 5.118 in (2)
  • 5.157 in (1)
  • 5.197 in (11)
  • 5.236 in (2)
  • 5.276 in (3)
  • 5.354 in (1)
  • 5.433 in (2)
  • 5.472 in (1)
  • 5.591 in (2)
  • 5.63 in (1)
  • 5.748 in (2)
  • 5.787 in (14)
  • 5.867 in (1)
  • 5.906 in (3)
  • 5.945 in (1)
  • 6.024 in (1)
  • 6.102 in (2)
  • 6.142 in (1)
  • 6.26 in (1)
  • 6.378 in (12)
  • 6.417 in (3)
  • 6.457 in (2)
  • 6.496 in (2)
  • 6.614 in (1)
  • 6.732 in (1)
  • 6.772 in (2)
  • 6.851 in (1)
  • 6.891 in (1)
  • 7.008 in (4)
  • 7.087 in (1)
  • 7.244 in (2)
  • 7.283 in (2)
  • 7.362 in (11)
  • 7.402 in (3)
  • 7.441 in (1)
  • 7.521 in (2)
  • 7.559 in (1)
  • 7.598 in (1)
  • 7.718 in (1)
  • 7.913 in (2)
  • 8.071 in (1)
  • 8.15 in (1)
  • 8.228 in (2)
  • 8.387 in (2)
  • 8.661 in (1)
  • 8.74 in (1)
  • 8.898 in (1)
  • 9.016 in (1)
  • 9.055 in (1)
  • 9.094 in (1)
  • 9.214 in (1)
  • 9.252 in (1)
  • 9.371 in (1)
  • 9.528 in (1)
  • 9.764 in (1)
  • 10.039 in (1)
范围 Min 到 范围 Max
范围
范围
  • 20.0 mm (1)
  • 21.0 mm (1)
  • 47.0 mm (5)
  • 48.0 mm (1)
  • 54.0 mm (8)
  • 57.0 mm (14)
  • 60.0 mm (3)
  • 63.0 mm (3)
  • 69.0 mm (5)
  • 72.0 mm (6)
  • 73.0 mm (4)
  • 76.0 mm (2)
  • 77.0 mm (2)
  • 79.0 mm (4)
  • 82.0 mm (8)
  • 86.0 mm (3)
  • 88.0 mm (2)
  • 92.0 mm (1)
  • 93.0 mm (2)
  • 95.0 mm (2)
  • 97.0 mm (14)
  • 98.0 mm (3)
  • 101.0 mm (2)
  • 102.0 mm (1)
  • 105.0 mm (2)
  • 106.0 mm (1)
  • 107.0 mm (4)
  • 109.0 mm (2)
  • 111.0 mm (2)
  • 114.0 mm (2)
  • 115.0 mm (2)
  • 117.0 mm (18)
  • 120.0 mm (2)
  • 121.0 mm (4)
  • 124.0 mm (1)
  • 125.0 mm (4)
  • 127.0 mm (2)
  • 128.0 mm (3)
  • 130.0 mm (2)
  • 131.0 mm (1)
  • 132.0 mm (11)
  • 133.0 mm (2)
  • 134.0 mm (3)
  • 136.0 mm (1)
  • 138.0 mm (2)
  • 139.0 mm (1)
  • 142.0 mm (2)
  • 143.0 mm (1)
  • 146.0 mm (2)
  • 147.0 mm (14)
  • 149.0 mm (1)
  • 150.0 mm (3)
  • 151.0 mm (1)
  • 153.0 mm (1)
  • 155.0 mm (2)
  • 156.0 mm (1)
  • 159.0 mm (1)
  • 162.0 mm (12)
  • 163.0 mm (3)
  • 164.0 mm (2)
  • 165.0 mm (2)
  • 168.0 mm (1)
  • 171.0 mm (1)
  • 172.0 mm (2)
  • 174.0 mm (1)
  • 175.0 mm (1)
  • 178.0 mm (4)
  • 180.0 mm (1)
  • 184.0 mm (2)
  • 185.0 mm (2)
  • 187.0 mm (11)
  • 188.0 mm (3)
  • 189.0 mm (1)
  • 191.0 mm (2)
  • 192.0 mm (1)
  • 193.0 mm (1)
  • 196.0 mm (1)
  • 201.0 mm (2)
  • 205.0 mm (1)
  • 207.0 mm (1)
  • 209.0 mm (2)
  • 213.0 mm (2)
  • 220.0 mm (1)
  • 222.0 mm (1)
  • 226.0 mm (1)
  • 229.0 mm (1)
  • 230.0 mm (1)
  • 231.0 mm (1)
  • 234.0 mm (1)
  • 235.0 mm (1)
  • 238.0 mm (1)
  • 242.0 mm (1)
  • 248.0 mm (1)
  • 255.0 mm (1)
范围 Min 到 范围 Max
连接类型
连接类型
  • Cylindrical Shank 2 Flats (130)
  • Whistle Drive 2 (134)
  • Whistle Notch 2 CylindricalEnd (8)
排屑槽数量
排屑槽数量
  • 1 (1)
  • 2 (271)
每个刀片的切削刃
每个刀片的切削刃
  • 1.0 (191)
  • 3.0 (272)
每个刀片的切削刃 Min 到 每个刀片的切削刃 Max
总长 [L]
总长 [L]
  • 4.331 in (3)
  • 4.724 in (5)
  • 4.843 in (3)
  • 4.875 in (1)
  • 5.0 in (4)
  • 5.236 in (5)
  • 5.25 in (1)
  • 5.375 in (1)
  • 5.625 in (1)
  • 5.63 in (4)
  • 5.827 in (3)
  • 5.875 in (3)
  • 6.0 in (4)
  • 6.22 in (6)
  • 6.25 in (5)
  • 6.375 in (2)
  • 6.5 in (1)
  • 6.614 in (3)
  • 6.625 in (2)
  • 6.75 in (2)
  • 6.811 in (7)
  • 6.875 in (3)
  • 7.0 in (3)
  • 7.125 in (1)
  • 7.126 in (1)
  • 7.205 in (7)
  • 7.25 in (2)
  • 7.375 in (2)
  • 7.5 in (1)
  • 7.598 in (7)
  • 7.625 in (3)
  • 7.75 in (5)
  • 7.756 in (1)
  • 7.875 in (1)
  • 7.913 in (1)
  • 7.992 in (7)
  • 8.0 in (4)
  • 8.125 in (1)
  • 8.15 in (1)
  • 8.189 in (2)
  • 8.228 in (1)
  • 8.25 in (1)
  • 8.307 in (1)
  • 8.375 in (5)
  • 8.425 in (1)
  • 8.5 in (3)
  • 8.583 in (10)
  • 8.622 in (1)
  • 8.625 in (3)
  • 8.74 in (1)
  • 8.75 in (2)
  • 8.819 in (1)
  • 8.875 in (4)
  • 8.898 in (1)
  • 8.976 in (1)
  • 9.0 in (2)
  • 9.125 in (4)
  • 9.134 in (1)
  • 9.173 in (12)
  • 9.25 in (3)
  • 9.291 in (1)
  • 9.375 in (4)
  • 9.625 in (1)
  • 9.646 in (1)
  • 9.75 in (2)
  • 9.764 in (14)
  • 9.803 in (1)
  • 9.875 in (2)
  • 9.961 in (1)
  • 10.0 in (2)
  • 10.118 in (1)
  • 10.125 in (2)
  • 10.25 in (1)
  • 10.375 in (1)
  • 10.472 in (1)
  • 10.5 in (3)
  • 10.63 in (1)
  • 10.749 in (14)
  • 10.75 in (1)
  • 10.787 in (1)
  • 10.875 in (1)
  • 10.945 in (1)
  • 11.0 in (3)
  • 11.102 in (1)
  • 11.125 in (3)
  • 11.375 in (3)
  • 11.457 in (1)
  • 11.614 in (1)
  • 11.625 in (3)
  • 11.75 in (1)
  • 11.772 in (1)
  • 11.875 in (1)
  • 12.0 in (1)
  • 12.125 in (2)
  • 12.126 in (1)
  • 12.283 in (1)
  • 12.441 in (1)
  • 12.5 in (2)
  • 12.598 in (1)
  • 12.75 in (1)
  • 13.0 in (1)
  • 13.125 in (1)
  • 13.25 in (1)
  • 13.625 in (1)
  • 13.875 in (1)
  • 14.0 in (1)
  • 14.125 in (1)
  • 14.26 in (1)
  • 14.375 in (1)
  • 14.625 in (1)
总长 [L] Min 到 总长 [L] Max
总长 [L]
总长 [L]
  • 110.0 mm (3)
  • 120.0 mm (5)
  • 123.0 mm (3)
  • 123.825 mm (1)
  • 127.0 mm (4)
  • 133.0 mm (5)
  • 133.35 mm (1)
  • 136.525 mm (1)
  • 142.875 mm (1)
  • 143.0 mm (4)
  • 148.0 mm (3)
  • 149.225 mm (3)
  • 152.4 mm (4)
  • 158.0 mm (6)
  • 158.75 mm (5)
  • 161.925 mm (2)
  • 165.101 mm (1)
  • 168.0 mm (3)
  • 168.275 mm (2)
  • 171.451 mm (2)
  • 173.0 mm (7)
  • 174.625 mm (3)
  • 177.8 mm (3)
  • 180.976 mm (1)
  • 181.0 mm (1)
  • 183.0 mm (7)
  • 184.15 mm (2)
  • 187.326 mm (2)
  • 190.5 mm (1)
  • 193.0 mm (7)
  • 193.675 mm (3)
  • 196.851 mm (5)
  • 197.0 mm (1)
  • 200.025 mm (1)
  • 201.0 mm (1)
  • 203.0 mm (7)
  • 203.201 mm (4)
  • 206.375 mm (1)
  • 207.0 mm (1)
  • 208.0 mm (2)
  • 209.0 mm (1)
  • 209.55 mm (1)
  • 211.0 mm (1)
  • 212.726 mm (5)
  • 214.0 mm (1)
  • 215.9 mm (3)
  • 218.0 mm (10)
  • 219.0 mm (1)
  • 219.076 mm (3)
  • 222.0 mm (1)
  • 222.25 mm (2)
  • 224.0 mm (1)
  • 225.425 mm (4)
  • 226.0 mm (1)
  • 228.0 mm (1)
  • 228.601 mm (2)
  • 231.775 mm (4)
  • 232.0 mm (1)
  • 233.0 mm (12)
  • 234.951 mm (3)
  • 236.0 mm (1)
  • 238.125 mm (4)
  • 244.476 mm (1)
  • 245.0 mm (1)
  • 247.65 mm (2)
  • 248.0 mm (14)
  • 249.0 mm (1)
  • 250.826 mm (2)
  • 253.0 mm (1)
  • 254.0 mm (2)
  • 257.0 mm (1)
  • 257.175 mm (2)
  • 260.35 mm (1)
  • 263.526 mm (1)
  • 266.0 mm (1)
  • 266.7 mm (3)
  • 270.0 mm (1)
  • 273.0 mm (14)
  • 273.05 mm (1)
  • 274.0 mm (1)
  • 276.225 mm (1)
  • 278.0 mm (1)
  • 279.401 mm (3)
  • 282.0 mm (1)
  • 282.575 mm (3)
  • 288.925 mm (3)
  • 291.0 mm (1)
  • 295.0 mm (1)
  • 295.276 mm (3)
  • 298.45 mm (1)
  • 299.0 mm (1)
  • 301.625 mm (1)
  • 304.8 mm (1)
  • 307.975 mm (2)
  • 308.0 mm (1)
  • 312.0 mm (1)
  • 316.0 mm (1)
  • 317.5 mm (2)
  • 320.0 mm (1)
  • 323.85 mm (1)
  • 330.201 mm (1)
  • 333.375 mm (1)
  • 336.55 mm (1)
  • 346.076 mm (1)
  • 352.425 mm (1)
  • 355.6 mm (1)
  • 358.776 mm (1)
  • 362.201 mm (1)
  • 365.125 mm (1)
  • 371.475 mm (1)
总长 [L] Min 到 总长 [L] Max
application
切削刀具材质
切削刀具材质
  • CS5 (255)
  • K6 (82)
  • KC7140 (255)
  • KC720 (272)
  • KC7215 (272)
  • KC7225 (255)
  • KC7815 (255)
  • KC7820 (191)
  • KC7845 (64)
  • KC7935 (272)
  • KC810 (234)
  • KC990 (255)
  • KCMS35 (195)
  • KCPK10 (255)
  • KCU25 (255)
  • KCU40 (255)
  • KD1425 (234)
  • KMF (255)
  • KU40D (255)
backEnd
后端直径
后端直径
  • 19.05 mm (14)
  • 20.0 mm (8)
  • 25.401 mm (25)
  • 31.75 mm (46)
  • 32.0 mm (38)
  • 38.1 mm (35)
  • 40.0 mm (59)
  • 50.0 mm (37)
  • 50.801 mm (10)
后端直径 Min 到 后端直径 Max
后端直径
后端直径
  • 0.75 in (14)
  • 0.787 in (8)
  • 1.0 in (25)
  • 1.25 in (46)
  • 1.26 in (38)
  • 1.5 in (35)
  • 1.575 in (59)
  • 1.969 in (37)
  • 2.0 in (10)
后端直径 Min 到 后端直径 Max
No filters matching ""

DFT Whistle Notch WD 刀柄 • 2.5 x D

(109) DFT Whistle Notch WD 刀柄 • 2.5 x D

DFT Flanged Shank • Right Hand • 2.5 x D

(75) DFT Flanged Shank • Right Hand • 2.5 x D

DFT Flanged Shank • Right Hand • 4 x D

(55) DFT Flanged Shank • Right Hand • 4 x D

DFT Whistle Notch WD 刀柄 • 4 x D

(33) DFT Whistle Notch WD 刀柄 • 4 x D
您即将把 添加至“我的解决方案”页面. 是否要继续？
product-image
Please adjust the following properties from

ISO Catalog

ANSI Catalog

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

应记录以查看仪表盘信息
Session expired due to inactivity, please login again
您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
件物品已成功添加到购物车
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

您已注册成功，现在就可以登录并使用网站了。

You are about to leave the Solution building process.

Are you sure you want to leave?