欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车

Screw-On • S-Style Clamping • For Positive Style Inserts

选择筛选器
筛选器
筛选器
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (177)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (177)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (177)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS (177)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS (177)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS (177)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS (177)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS (177)
  • M 不锈钢 (177)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS (177)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS (177)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS (177)
  • K 铸铁 (177)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS (177)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS (177)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS (177)
  • N 非铁金属材料 (177)
    • N1
      铝型材 (177)
    • N2
      低硅铝合金和镁合金 硅 < 12.2% (177)
    • N3
      高硅铝合金 硅 > 12.2% (133)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基 (177)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维 (177)
    • N6
      碳、石墨复合材料、CFRP (177)
    • N7
      MMC (138)
  • S 高温合金 (177)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS (177)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS (177)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS (177)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS (177)
  • H 淬火材料 (138)
    • H1
      淬火材料 44-48 HRC (138)
    • H2
      淬火材料 48-55 HRC (138)
    • H3
      淬火材料 56-60 HRC (133)
    • H4
      淬火材料 >60 HRC (133)
  • C CFRP 材料 (171)
    • C1
      CFRP，CFRP/CFRP (171)
    • C2
      CFRP/铝 CFRP/有色金属 (138)
选择 First Choice
  • US (7)
应用
应用
  • Facing Facing (16)
  • ID Facing ID Facing (1)
  • Multiple Direction Cutting Multiple Direction Cutting (174)
  • Profiling Profiling (159)
  • TRN Boring TRN Boring (166)
  • Turning Turning (16)
切削条件
切削条件
  • Heavily Interrupted Cut (113)
  • Lightly Interrupted Cut (177)
  • Smooth Cut (177)
  • Varying Depth of Cut (173)
刀具切削刃角度
刀具切削刃角度
  • 90.0 (32)
  • 93.0 (31)
  • 95.0 (110)
  • 97.0 (4)
刀具切削刃角度 Min 到 刀具切削刃角度 Max
连接类型
连接类型
  • Boring Bar Shank (162)
  • KM (15)
每个刀片的切削刃
每个刀片的切削刃
  • 1.0 (133)
  • 2.0 (113)
  • 3.0 (64)
  • 4.0 (43)
每个刀片的切削刃 Min 到 每个刀片的切削刃 Max
总长 [L]
总长 [L]
  • 2.375 in (2)
  • 2.5 in (2)
  • 2.75 in (1)
  • 3.0 in (1)
  • 3.15 in (2)
  • 3.375 in (2)
  • 3.543 in (4)
  • 3.938 in (1)
  • 3.95 in (4)
  • 3.96 in (3)
  • 4.0 in (14)
  • 4.331 in (5)
  • 4.375 in (1)
  • 4.851 in (2)
  • 4.852 in (2)
  • 4.892 in (1)
  • 4.912 in (1)
  • 5.0 in (5)
  • 5.513 in (4)
  • 5.876 in (1)
  • 5.906 in (1)
  • 5.955 in (4)
  • 6.0 in (42)
  • 7.037 in (1)
  • 7.057 in (2)
  • 7.087 in (2)
  • 7.136 in (2)
  • 7.875 in (2)
  • 7.931 in (2)
  • 7.974 in (2)
  • 8.0 in (12)
  • 9.9 in (5)
  • 10.0 in (32)
  • 12.0 in (10)
总长 [L] Min 到 总长 [L] Max
总长 [L]
总长 [L]
  • 60.325 mm (2)
  • 63.5 mm (2)
  • 69.851 mm (1)
  • 76.2 mm (1)
  • 80.0 mm (2)
  • 85.726 mm (2)
  • 90.0 mm (4)
  • 100.0 mm (1)
  • 100.325 mm (4)
  • 100.575 mm (3)
  • 101.601 mm (14)
  • 110.0 mm (5)
  • 111.125 mm (1)
  • 123.2 mm (2)
  • 123.25 mm (2)
  • 124.25 mm (1)
  • 124.75 mm (1)
  • 127.0 mm (5)
  • 140.0 mm (4)
  • 149.25 mm (1)
  • 150.0 mm (1)
  • 151.25 mm (4)
  • 152.4 mm (42)
  • 178.75 mm (1)
  • 179.25 mm (2)
  • 180.0 mm (2)
  • 181.25 mm (2)
  • 200.0 mm (2)
  • 201.451 mm (2)
  • 202.55 mm (2)
  • 203.201 mm (12)
  • 251.451 mm (5)
  • 254.0 mm (32)
  • 304.8 mm (10)
总长 [L] Min 到 总长 [L] Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.0 in (5)
  • 0.001 in (9)
  • 0.002 in (64)
  • 0.004 in (101)
  • 0.007 in (55)
  • 0.008 in (113)
  • 0.015 in (55)
  • 0.016 in (118)
  • 0.031 in (115)
  • 0.047 in (33)
  • 0.063 in (5)
刀尖半径 Min 到 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.0 mm (5)
  • 0.025 mm (9)
  • 0.05 mm (64)
  • 0.1 mm (101)
  • 0.176 mm (55)
  • 0.2 mm (113)
  • 0.375 mm (55)
  • 0.4 mm (118)
  • 0.775 mm (12)
  • 0.8 mm (103)
  • 1.201 mm (33)
  • 1.6 mm (5)
刀尖半径 Min 到 刀尖半径 Max
application
最小切削深度
最小切削深度
最小进给
最小进给
切削刀具材质
切削刀具材质
  • CG5 (7)
  • CG6 (3)
  • CM1 (7)
  • HT2 (9)
  • HTX (9)
  • K00379 (54)
  • K10M (4)
  • K10P (4)
  • K10U (9)
  • K15U (9)
  • K20K (4)
  • K25M (4)
  • K313 (143)
  • K420 (42)
  • K68 (101)
  • KB1345 (33)
  • KB1610 (71)
  • KB1625 (15)
  • KB1630 (50)
  • KB5610 (63)
  • KB5625 (69)
  • KB5630 (42)
  • KB9610 (70)
  • KBH10 (9)
  • KBH20 (78)
  • KC250 (46)
  • KC5010 (177)
  • KC5025 (172)
  • KC5410 (99)
  • KC710 (80)
  • KC720 (99)
  • KC730 (172)
  • KC7310 (26)
  • KC732 (96)
  • KC8050 (99)
  • KC810 (101)
  • KC850 (118)
  • KC9010 (81)
  • KC9025 (112)
  • KC910 (101)
  • KC9105 (86)
  • KC9110 (110)
  • KC9120 (83)
  • KC9125 (110)
  • KC9225 (110)
  • KC9240 (102)
  • KC9240NEW (99)
  • KC9315 (110)
  • KC9320 (84)
  • KC9325 (78)
  • KC935 (160)
  • KC950 (86)
  • KC990 (96)
  • KCD25 (91)
  • KCK05 (105)
  • KCK05B (17)
  • KCK15 (81)
  • KCK15B (83)
  • KCK20 (105)
  • KCK20B (91)
  • KCM15 (97)
  • KCM15B (54)
  • KCM25 (113)
  • KCM25B (83)
  • KCM25S (9)
  • KCM35 (37)
  • KCM35B (5)
  • KCP05 (94)
  • KCP05B (5)
  • KCP10 (107)
  • KCP10B (99)
  • KCP20S (9)
  • KCP25 (113)
  • KCP25B (102)
  • KCP25C (110)
  • KCP30 (71)
  • KCP30B (5)
  • KCPK05 (21)
  • KCS10 (113)
  • KCS10B (87)
  • KCS25S (9)
  • KCU10 (166)
  • KCU10B (171)
  • KCU25 (155)
  • KCU25B (170)
  • KD050 (51)
  • KD081 (63)
  • KD100 (109)
  • KD105 (47)
  • KD120 (42)
  • KD1400 (133)
  • KD1405 (55)
  • KD1425 (133)
  • KN10S (9)
  • KT125 (46)
  • KT150 (46)
  • KT175 (94)
  • KT315 (166)
  • KT325 (9)
  • KTP10 (94)
  • KTP25S (9)
  • KU10 (68)
  • KU10T (91)
  • KU30T (78)
  • SPM5F2 (42)
  • SPMQMA (20)
  • W00162 (4)
  • WBH10C (4)
  • WBH10P (11)
  • WBH10U (11)
  • WBH25P (13)
  • WBH30P (11)
  • WDN00U (12)
  • WDN25U (15)
  • WK20CT (13)
  • WM15CT (13)
  • WM25CT (11)
  • WP15CT (11)
  • WP25CT (15)
刀具手式
刀具手式
  • L (62)
  • R (115)
修光刃刀片
修光刃刀片
  • N (177)
  • Y (61)
F 尺寸
F 尺寸
  • 2.401 mm (4)
  • 2.651 mm (5)
  • 2.825 mm (3)
  • 2.975 mm (4)
  • 3.026 mm (6)
  • 3.176 mm (1)
  • 3.2 mm (2)
  • 3.426 mm (2)
  • 3.625 mm (1)
  • 3.676 mm (7)
  • 3.7 mm (2)
  • 3.725 mm (5)
  • 3.85 mm (2)
  • 3.95 mm (5)
  • 4.425 mm (2)
  • 4.7 mm (5)
  • 4.75 mm (3)
  • 4.801 mm (2)
  • 5.351 mm (1)
  • 5.575 mm (6)
  • 5.601 mm (1)
  • 5.801 mm (1)
  • 5.875 mm (4)
  • 6.351 mm (10)
  • 6.551 mm (1)
  • 6.601 mm (1)
  • 6.875 mm (5)
  • 6.926 mm (1)
  • 7.0 mm (2)
  • 7.926 mm (9)
  • 8.875 mm (5)
  • 9.0 mm (6)
  • 9.525 mm (2)
  • 10.3 mm (10)
  • 10.326 mm (2)
  • 10.875 mm (4)
  • 11.0 mm (7)
  • 11.101 mm (2)
  • 12.701 mm (14)
  • 12.875 mm (5)
  • 13.0 mm (4)
  • 14.275 mm (3)
  • 15.875 mm (2)
  • 16.25 mm (6)
  • 19.05 mm (2)
F 尺寸 Min 到 F 尺寸 Max
F 尺寸
F 尺寸
  • 0.095 in (4)
  • 0.105 in (5)
  • 0.111 in (3)
  • 0.117 in (4)
  • 0.12 in (6)
  • 0.125 in (1)
  • 0.126 in (2)
  • 0.135 in (2)
  • 0.144 in (1)
  • 0.145 in (7)
  • 0.146 in (2)
  • 0.147 in (5)
  • 0.152 in (2)
  • 0.156 in (5)
  • 0.175 in (2)
  • 0.185 in (5)
  • 0.187 in (3)
  • 0.189 in (2)
  • 0.211 in (1)
  • 0.219 in (6)
  • 0.221 in (1)
  • 0.228 in (1)
  • 0.231 in (4)
  • 0.25 in (10)
  • 0.258 in (1)
  • 0.26 in (1)
  • 0.271 in (5)
  • 0.273 in (1)
  • 0.276 in (2)
  • 0.312 in (9)
  • 0.35 in (5)
  • 0.354 in (6)
  • 0.375 in (2)
  • 0.406 in (10)
  • 0.408 in (2)
  • 0.428 in (4)
  • 0.433 in (7)
  • 0.437 in (2)
  • 0.5 in (14)
  • 0.507 in (5)
  • 0.512 in (4)
  • 0.562 in (3)
  • 0.625 in (2)
  • 0.64 in (6)
  • 0.75 in (2)
F 尺寸 Min 到 F 尺寸 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 4.575 mm (4)
  • 5.275 mm (5)
  • 5.551 mm (3)
  • 5.7 mm (4)
  • 5.95 mm (7)
  • 6.601 mm (1)
  • 6.775 mm (2)
  • 6.9 mm (1)
  • 6.976 mm (2)
  • 7.051 mm (1)
  • 7.075 mm (1)
  • 7.101 mm (4)
  • 7.25 mm (8)
  • 7.426 mm (2)
  • 7.525 mm (3)
  • 8.15 mm (2)
  • 8.8 mm (2)
  • 9.05 mm (4)
  • 9.1 mm (4)
  • 9.15 mm (1)
  • 9.201 mm (1)
  • 10.5 mm (1)
  • 10.55 mm (6)
  • 10.951 mm (1)
  • 11.0 mm (4)
  • 11.125 mm (1)
  • 12.201 mm (10)
  • 12.9 mm (1)
  • 13.0 mm (7)
  • 13.675 mm (1)
  • 15.25 mm (11)
  • 16.0 mm (11)
  • 18.55 mm (2)
  • 19.55 mm (12)
  • 20.0 mm (11)
  • 21.6 mm (2)
  • 23.625 mm (10)
  • 24.901 mm (3)
  • 25.0 mm (9)
  • 25.401 mm (2)
  • 30.225 mm (2)
  • 30.475 mm (4)
  • 31.0 mm (2)
  • 33.025 mm (2)
最小轴向凹槽直径 Min 到 最小轴向凹槽直径 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 0.18 in (4)
  • 0.209 in (5)
  • 0.219 in (3)
  • 0.224 in (4)
  • 0.234 in (7)
  • 0.26 in (1)
  • 0.267 in (2)
  • 0.272 in (1)
  • 0.275 in (2)
  • 0.278 in (1)
  • 0.279 in (1)
  • 0.28 in (4)
  • 0.286 in (8)
  • 0.292 in (2)
  • 0.296 in (3)
  • 0.321 in (2)
  • 0.347 in (2)
  • 0.356 in (4)
  • 0.358 in (4)
  • 0.36 in (1)
  • 0.362 in (1)
  • 0.414 in (1)
  • 0.416 in (6)
  • 0.431 in (1)
  • 0.433 in (4)
  • 0.438 in (1)
  • 0.48 in (10)
  • 0.508 in (1)
  • 0.512 in (7)
  • 0.538 in (1)
  • 0.6 in (11)
  • 0.63 in (11)
  • 0.73 in (2)
  • 0.77 in (12)
  • 0.787 in (11)
  • 0.85 in (2)
  • 0.93 in (10)
  • 0.98 in (3)
  • 0.984 in (9)
  • 1.0 in (2)
  • 1.19 in (2)
  • 1.2 in (4)
  • 1.22 in (2)
  • 1.3 in (2)
最小轴向凹槽直径 Min 到 最小轴向凹槽直径 Max
切削方向
切削方向
  • B (110)
  • E (67)
前角样式
前角样式
  • NEGATIVE-ZERO (81)
  • NEUTRAL (ZERO) (26)
  • POSITIVE-NEGATIVE (4)
  • POSITIVE-ZERO (66)
最大镗孔深度
最大镗孔深度
  • 0.875 in (3)
  • 0.935 in (3)
  • 0.946 in (1)
  • 1.0 in (2)
  • 1.122 in (1)
  • 1.124 in (3)
  • 1.125 in (6)
  • 1.181 in (5)
  • 1.25 in (1)
  • 1.417 in (9)
  • 1.498 in (3)
  • 1.5 in (9)
  • 1.873 in (5)
  • 1.875 in (10)
  • 1.891 in (9)
  • 1.969 in (2)
  • 2.249 in (2)
  • 2.25 in (12)
  • 2.362 in (10)
  • 2.5 in (2)
  • 2.835 in (8)
  • 3.0 in (12)
  • 3.15 in (5)
  • 3.749 in (2)
  • 3.75 in (12)
  • 3.781 in (6)
  • 3.938 in (4)
  • 4.5 in (15)
  • 4.724 in (5)
  • 6.0 in (10)
最大镗孔深度 Min 到 最大镗孔深度 Max
最大镗孔深度
最大镗孔深度
  • 22.225 mm (3)
  • 23.75 mm (3)
  • 24.0 mm (1)
  • 25.401 mm (2)
  • 28.5 mm (1)
  • 28.55 mm (3)
  • 28.576 mm (6)
  • 30.0 mm (5)
  • 31.75 mm (1)
  • 36.0 mm (9)
  • 38.051 mm (3)
  • 38.1 mm (9)
  • 47.575 mm (5)
  • 47.625 mm (10)
  • 48.0 mm (9)
  • 50.0 mm (2)
  • 57.125 mm (2)
  • 57.151 mm (12)
  • 60.0 mm (10)
  • 63.5 mm (2)
  • 72.0 mm (8)
  • 76.2 mm (12)
  • 80.0 mm (5)
  • 95.226 mm (2)
  • 95.25 mm (12)
  • 96.0 mm (6)
  • 100.0 mm (4)
  • 114.301 mm (15)
  • 120.0 mm (5)
  • 152.4 mm (10)
最大镗孔深度 Min 到 最大镗孔深度 Max
镗杆材料
镗杆材料
  • C (162)
  • S (15)
frontEnd
刀片形状
刀片形状
  • C-DIAMOND/RHOMBIC 80 (93)
  • D-DIAMOND/RHOMBIC 55 (20)
  • T-TRIANGLE 60 (43)
  • W-TRIGON 80 (21)
最大切削深度
最大切削深度
  • 0.113 in (1)
  • 0.183 in (2)
  • 0.184 in (2)
最大切削深度 Min 到 最大切削深度 Max
最大切削深度
最大切削深度
  • 2.875 mm (1)
  • 4.65 mm (2)
  • 4.675 mm (2)
最大切削深度 Min 到 最大切削深度 Max
insertGeometry
切削刀具材料
切削刀具材料
  • B H (120)
  • B L (145)
  • D P (145)
  • H T (166)
  • H W (177)
backEnd
连接类型
连接类型
  • BORING BAR (162)
  • TAPER SHANK (15)
系统规格
系统规格
  • KM50TS (15)
后端直径
后端直径
  • 3.95 mm (3)
  • 4.0 mm (1)
  • 4.75 mm (10)
  • 5.0 mm (5)
  • 6.0 mm (9)
  • 6.351 mm (12)
  • 7.926 mm (7)
  • 7.95 mm (6)
  • 8.0 mm (9)
  • 9.525 mm (14)
  • 10.0 mm (6)
  • 12.0 mm (12)
  • 12.701 mm (15)
  • 15.875 mm (15)
  • 16.0 mm (8)
  • 19.05 mm (15)
  • 20.0 mm (5)
  • 25.401 mm (10)
  • 50.0 mm (15)
后端直径 Min 到 后端直径 Max
后端直径
后端直径
  • 0.156 in (3)
  • 0.157 in (1)
  • 0.187 in (10)
  • 0.197 in (5)
  • 0.237 in (9)
  • 0.25 in (12)
  • 0.312 in (7)
  • 0.313 in (6)
  • 0.315 in (9)
  • 0.375 in (14)
  • 0.394 in (6)
  • 0.473 in (12)
  • 0.5 in (15)
  • 0.625 in (15)
  • 0.63 in (8)
  • 0.75 in (15)
  • 0.787 in (5)
  • 1.0 in (10)
  • 1.969 in (15)
后端直径 Min 到 后端直径 Max
刀柄高度
刀柄高度
  • 0.449 in (7)
  • 0.606 in (6)
  • 0.764 in (5)
刀柄高度 Min 到 刀柄高度 Max
刀柄高度
刀柄高度
  • 11.4 mm (7)
  • 15.4 mm (6)
  • 19.401 mm (5)
刀柄高度 Min 到 刀柄高度 Max
No filters matching ""

KM™ 快换刀具

(15) KM™ 快换刀具

E-SCLC -5°

(9) E-SCLC -5°

E-SCLD 95°

(6) E-SCLD 95°

E-SCLD 95°

(13) E-SCLD 95°

E-STLD 95°

(11) E-STLD 95°

E-SCLD -5°

(11) E-SCLD -5°

E-SCFD 0°

(5) E-SCFD 0°

E-STFD 0°

(2) E-STFD 0°

E-SC7D -7°

(1) E-SC7D -7°

E-STFP 90°

(8) E-STFP 90°

E-STFP 0°

(9) E-STFP 0°

E-SDUP 93°

(6) E-SDUP 93°

E-SCLP 95°

(10) E-SCLP 95°

E-SCFP 90°

(3) E-SCFP 90°

E-STLP -5°

(10) E-STLP -5°

E-SWLP -5°

(12) E-SWLP -5°

E-SDUP -3°

(11) E-SDUP -3°
您即将把 添加至“我的解决方案”页面. 是否要继续？
product-image
Please adjust the following properties from

ISO Catalog

ANSI Catalog

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

应记录以查看仪表盘信息
Session expired due to inactivity, please login again
您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
件物品已成功添加到购物车
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

您已注册成功，现在就可以登录并使用网站了。

You are about to leave the Solution building process.

Are you sure you want to leave?