Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

Search results for

Select Filters
Filters
Filters
    • Applied Filters:
    • Clear all filters
  • X First Choice:
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (320)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (298)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (298)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (298)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (298)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (298)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (320)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (320)
  • M Stainless Steel (320)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (320)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (320)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (320)
  • K Cast Iron (228)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (228)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (228)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (228)
  • N Non-Ferrous Materials (188)
    • N1
      Wrought Aluminum
      (188)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (188)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (188)
  • S High-Temp Alloys (320)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (300)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (300)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (300)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (320)
  • H Hardened Materials (190)
    • H1
      Hardened Materials 44-48 HRC
      (190)
Select First Choice
  • BR (58)
  • CN (384)
  • DE (383)
  • GB (213)
  • IN (78)
  • SG (131)
  • US (346)
Applications
Applications
  • Face Milling Face Milling (180)
  • ID Thread Turning ID Thread Turning (1)
  • Pocket Pocket (106)
  • Pocket Helical Pocket Helical (106)
  • Pocket Milling Pocket Milling (106)
  • Profile Milling Profile Milling (1)
  • Ramping Ramping (106)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (33)
  • Shoulder Milling Shoulder Milling (180)
  • Shoulder Roughing Shoulder Roughing (137)
  • Shoulder Square End Shoulder Square End (180)
  • Slot Milling Slot Milling (81)
  • Slot Side Slot Side (2)
  • Slot Square End Slot Square End (81)
Cutting Diameter
Cutting Diameter
  • 0.473 in (1)
  • 0.5 in (1)
  • 0.625 in (9)
  • 0.63 in (4)
  • 0.709 in (1)
  • 0.75 in (18)
  • 0.787 in (6)
  • 0.875 in (1)
  • 0.984 in (7)
  • 1.0 in (31)
  • 1.1 in (1)
  • 1.25 in (23)
  • 1.26 in (3)
  • 1.5 in (19)
  • 1.575 in (6)
  • 1.969 in (3)
  • 2.0 in (13)
  • 2.48 in (4)
  • 2.5 in (9)
  • 3.0 in (9)
  • 3.15 in (3)
  • 4.0 in (4)
  • 5.0 in (3)
  • 6.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.0 mm (1)
  • 12.701 mm (1)
  • 15.875 mm (9)
  • 16.0 mm (4)
  • 18.0 mm (1)
  • 19.05 mm (18)
  • 20.0 mm (6)
  • 22.225 mm (1)
  • 25.0 mm (7)
  • 25.401 mm (31)
  • 27.951 mm (1)
  • 31.75 mm (23)
  • 32.0 mm (3)
  • 38.1 mm (19)
  • 40.0 mm (6)
  • 50.0 mm (3)
  • 50.801 mm (13)
  • 63.0 mm (4)
  • 63.5 mm (9)
  • 76.2 mm (9)
  • 80.0 mm (3)
  • 101.601 mm (4)
  • 127.0 mm (3)
  • 152.4 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 9.726 mm (1)
  • 9.75 mm (2)
  • 9.826 mm (1)
  • 9.875 mm (4)
  • 9.9 mm (1)
  • 9.925 mm (1)
  • 9.951 mm (8)
  • 10.0 mm (1)
  • 10.025 mm (10)
  • 10.05 mm (8)
  • 10.076 mm (4)
  • 10.101 mm (7)
  • 10.25 mm (2)
  • 11.0 mm (32)
  • 14.0 mm (11)
  • 14.101 mm (1)
  • 14.3 mm (4)
  • 14.4 mm (6)
  • 14.476 mm (1)
  • 14.5 mm (6)
  • 14.601 mm (9)
  • 14.701 mm (1)
  • 14.726 mm (4)
  • 15.5 mm (43)
  • 18.8 mm (1)
  • 18.925 mm (1)
  • 27.8 mm (1)
  • 36.375 mm (1)
  • 40.401 mm (1)
  • 40.95 mm (1)
  • 44.325 mm (2)
  • 44.801 mm (1)
  • 52.801 mm (1)
  • 53.45 mm (1)
  • 54.1 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.383 in (1)
  • 0.384 in (2)
  • 0.387 in (1)
  • 0.389 in (4)
  • 0.39 in (1)
  • 0.391 in (1)
  • 0.392 in (8)
  • 0.394 in (1)
  • 0.395 in (10)
  • 0.396 in (8)
  • 0.397 in (4)
  • 0.398 in (7)
  • 0.404 in (2)
  • 0.433 in (32)
  • 0.551 in (11)
  • 0.555 in (1)
  • 0.564 in (4)
  • 0.568 in (6)
  • 0.571 in (1)
  • 0.572 in (6)
  • 0.576 in (9)
  • 0.579 in (1)
  • 0.58 in (4)
  • 0.61 in (43)
  • 0.74 in (1)
  • 0.745 in (1)
  • 1.094 in (1)
  • 1.432 in (1)
  • 1.591 in (1)
  • 1.612 in (1)
  • 1.745 in (2)
  • 1.764 in (1)
  • 2.079 in (1)
  • 2.104 in (1)
  • 2.13 in (1)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.787 in (1)
  • 0.8 in (1)
  • 0.972 in (1)
  • 0.984 in (3)
  • 0.987 in (1)
  • 0.999 in (1)
  • 1.0 in (6)
  • 1.053 in (2)
  • 1.1 in (10)
  • 1.102 in (3)
  • 1.239 in (1)
  • 1.25 in (12)
  • 1.26 in (3)
  • 1.379 in (3)
  • 1.5 in (4)
  • 1.536 in (1)
  • 1.574 in (2)
  • 1.575 in (35)
  • 1.589 in (1)
  • 1.6 in (5)
  • 1.693 in (1)
  • 1.73 in (1)
  • 1.732 in (1)
  • 1.75 in (31)
  • 1.79 in (1)
  • 1.901 in (2)
  • 1.969 in (7)
  • 2.0 in (6)
  • 2.091 in (1)
  • 2.25 in (22)
  • 2.362 in (1)
  • 2.38 in (4)
  • 2.4 in (1)
  • 2.5 in (2)
  • 3.0 in (3)
Reach Min to Reach Max
Reach
Reach
  • 20.0 mm (1)
  • 20.326 mm (1)
  • 24.701 mm (1)
  • 25.0 mm (3)
  • 25.076 mm (1)
  • 25.375 mm (1)
  • 25.401 mm (6)
  • 26.75 mm (2)
  • 27.951 mm (10)
  • 28.0 mm (3)
  • 31.475 mm (1)
  • 31.75 mm (12)
  • 32.0 mm (3)
  • 35.0 mm (3)
  • 38.1 mm (4)
  • 39.0 mm (1)
  • 39.975 mm (2)
  • 40.0 mm (35)
  • 40.35 mm (1)
  • 40.651 mm (5)
  • 43.0 mm (1)
  • 43.95 mm (1)
  • 44.0 mm (1)
  • 44.45 mm (31)
  • 45.475 mm (1)
  • 48.25 mm (2)
  • 50.0 mm (6)
  • 50.026 mm (1)
  • 50.801 mm (6)
  • 53.1 mm (1)
  • 57.151 mm (22)
  • 60.0 mm (1)
  • 60.45 mm (4)
  • 60.95 mm (1)
  • 63.5 mm (2)
  • 76.2 mm (3)
Reach Min to Reach Max
Connection Style
Connection Style
  • 2 Key & Cutter Retention Screw (1)
  • A-Socket Head Cap Screw (58)
  • CV-Caterpillar V-Flange In (1)
  • Screw-On Connection (20)
  • Straight-Cylindrical (62)
  • Weldon (38)
Number of Flutes
Number of Flutes
  • 1 (3)
  • 11 (1)
  • 12 (1)
  • 2 (37)
  • 3 (44)
  • 4 (29)
  • 5 (29)
  • 6 (13)
  • 7 (11)
  • 8 (9)
  • 9 (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (166)
  • 1.0 (52)
  • 2.0 (106)
  • 4.0 (74)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (1)
  • 0.016 in (21)
  • 0.031 in (78)
  • 0.047 in (24)
  • 0.063 in (26)
  • 0.064 in (2)
  • 0.079 in (4)
  • 0.094 in (4)
  • 0.122 in (5)
  • 0.157 in (1)
  • 0.2 in (101)
  • 0.4 in (175)
  • 0.79 in (101)
  • 0.794 in (49)
  • 0.8 in (175)
  • 1.0 in (52)
  • 1.19 in (101)
  • 1.2 in (123)
  • 1.59 in (101)
  • 1.6 in (175)
  • 1.62 in (42)
  • 2.0 in (143)
  • 2.38 in (101)
  • 3.1 in (106)
  • 4.0 in (106)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (102)
  • 0.4 mm (196)
  • 0.79 mm (101)
  • 0.794 mm (49)
  • 0.8 mm (253)
  • 1.0 mm (52)
  • 1.19 mm (101)
  • 1.2 mm (123)
  • 1.201 mm (24)
  • 1.59 mm (101)
  • 1.6 mm (201)
  • 1.62 mm (42)
  • 1.625 mm (2)
  • 2.0 mm (147)
  • 2.375 mm (4)
  • 2.38 mm (101)
  • 3.1 mm (111)
  • 4.0 mm (107)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (56)
  • KC410M (106)
  • KC422M (188)
  • KC510M (52)
  • KC520M (192)
  • KC522M (190)
  • KC725M (233)
  • KCK15 (180)
  • KCK20B (165)
  • KCPK30 (200)
  • KCPM20 (180)
  • KCPM40 (214)
  • KCSM30 (180)
  • KCSM40 (202)
  • KD1410 (52)
Hand Of Tool
Hand Of Tool
  • R (179)
  • R - Right Hand Helix/Flute (1)
Wiper Insert
Wiper Insert
  • N (166)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.75 (1)
  • 1.0 (1)
  • 1.5 (5)
  • 1.9 (1)
  • 2.0 (6)
  • 2.5 (11)
  • 2.75 (1)
  • 3.0 (1)
  • 3.25 (1)
  • 3.4 (5)
  • 4.0 (12)
  • 4.8 (2)
  • 5.0 (1)
  • 5.2 (5)
  • 5.25 (1)
  • 5.5 (2)
  • 6.0 (4)
  • 6.5 (7)
  • 6.8 (1)
  • 6.9 (4)
  • 7.2 (3)
  • 7.5 (1)
  • 8.0 (2)
  • 9.5 (7)
  • 10.2 (4)
  • 10.4 (3)
  • 10.5 (5)
  • 11.5 (2)
  • 16.6 (2)
  • 18.0 (2)
  • 18.5 (2)
  • 25.0 (1)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • E-PARALLELOGRAM 70 (188)
  • X-PARALLELOGRAM 70 (106)
  • X-PARALLELOGRAM 75 (58)
  • X-RECTANGLE MILL 4 90 (156)
Neck Diameter
Neck Diameter
  • 0.029 in (1)
  • 0.03 in (1)
  • 0.037 in (1)
  • 0.038 in (1)
  • 0.045 in (2)
  • 0.046 in (2)
  • 0.048 in (5)
  • 0.058 in (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 18.5 mm (1)
  • 18.8 mm (1)
  • 23.6 mm (1)
  • 25.0 mm (1)
  • 29.451 mm (2)
  • 29.875 mm (1)
  • 29.901 mm (1)
  • 31.0 mm (4)
  • 31.25 mm (1)
  • 37.6 mm (1)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • E-PARALLELOGRAM 70 (82)
  • X-PARALLELOGRAM 75 (2)
  • X-RECTANGLE MILL 4 90 (82)
Cutting Edge Length
Cutting Edge Length
  • 10.025 mm (1)
  • 10.201 mm (1)
  • 10.351 mm (16)
  • 10.451 mm (3)
  • 10.476 mm (21)
  • 12.101 mm (9)
  • 12.175 mm (24)
  • 15.25 mm (3)
  • 15.275 mm (26)
  • 15.3 mm (2)
  • 16.151 mm (7)
  • 16.901 mm (17)
  • 17.0 mm (25)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.016 in (42)
  • 0.019 in (33)
  • 0.024 in (31)
  • 0.025 in (7)
  • 0.027 in (42)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GD (28)
  • GE (66)
  • GEH (1)
  • GEM (14)
  • HD (37)
  • LD (18)
  • LE (2)
Cutting Tool Material
Cutting Tool Material
  • H W (165)
Tolerance Class
Tolerance Class
  • C (54)
  • G (56)
  • P (56)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (100)
  • SCREW-ON (20)
  • SHELL MILL (59)
  • TAPER SHANK (1)
System Size
System Size
  • CV40 (1)
Back-End Diameter
Back-End Diameter
  • 12.701 mm (4)
  • 13.0 mm (2)
  • 15.875 mm (6)
  • 16.0 mm (9)
  • 18.0 mm (4)
  • 19.0 mm (3)
  • 19.05 mm (37)
  • 19.1 mm (6)
  • 20.0 mm (4)
  • 21.0 mm (6)
  • 22.0 mm (7)
  • 25.0 mm (5)
  • 25.401 mm (36)
  • 27.0 mm (3)
  • 29.0 mm (8)
  • 31.75 mm (28)
  • 32.0 mm (2)
  • 38.1 mm (8)
  • 44.45 mm (1)
  • 50.801 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.5 in (4)
  • 0.512 in (2)
  • 0.625 in (6)
  • 0.63 in (9)
  • 0.709 in (4)
  • 0.748 in (3)
  • 0.75 in (37)
  • 0.752 in (6)
  • 0.787 in (4)
  • 0.828 in (6)
  • 0.866 in (7)
  • 0.984 in (5)
  • 1.0 in (36)
  • 1.063 in (3)
  • 1.143 in (8)
  • 1.25 in (28)
  • 1.26 in (2)
  • 1.5 in (8)
  • 1.75 in (1)
  • 2.0 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
Narrow by category:
Shoulder Mills
    • Applied Filters:
    • Clear all filters
  • X First Choice:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Mill 1-14™ Helical

Helical Shell Mills
(2 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts [Z] Number of Flutes Maximum Ramping Angle Weight Pounds Max RPM
3732934 M1HR200E14S075Z3L250C9 M1HR200E14S075Z3L250C9   50.8000 2.000 19.05 .75 44.4500 1.750 63.5000 2.500 40.4000 1.591 9 3 3.400 1.27 24600
    List price:
    $776.51 /each.
    Your price::
    3732939 M1HR250E14S100Z3L300C12 M1HR250E14S100Z3L300C12 63.5000 2.500 25.4 1.0 55.5600 2.188 76.2000 3.000 52.8000 2.080 12 3 2.500 2.61 22000  
      List price:
      $994.90 /each.
      Your price::
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor

      ORIGINAL PRODUCT

      Mill 1-14™ Helical

      Helical End Mills
      (4 Products)
      • 端面铣削端面铣削
      • 螺旋铣削螺旋铣削
      • 坡铣： 毛坯坡铣： 毛坯
      • 槽铣： 方头立铣槽铣： 方头立铣
      • 侧铣/方肩铣削： 方头立铣侧铣/方肩铣削： 方头立铣
      • 刀座刀座
      • 刀柄 — 圆柱 Weldon 2平底刀柄 — 圆柱 Weldon 2平底
      • 铣削 — 贯通式冷却铣削 — 贯通式冷却
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts [Z] Number of Flutes Maximum Ramping Angle Weight Pounds Max RPM
      3732889 M1HR125E14W125Z2L200C4 M1HR125E14W125Z2L200C4   31.7500 1.250 31.74 1.25 108.7100 4.280 50.8000 2.000 27.8000 1.100 4 2 6.900 1.10 31100
        List price:
        $570.94 /each.
        Your price::
        3732891 M1HR150E14W125Z3L250C9 M1HR150E14W125Z3L250C9 38.1000 1.500 31.74 1.25 121.4100 4.780 63.5000 2.500 40.9600 1.612 9 3 5.200 1.31 28400  
          List price:
          $942.08 /each.
          Your price::
          3732892 M1HR150E14W125Z3L300C12 M1HR150E14W125Z3L300C12 38.1000 1.500 31.74 1.25 134.1200 5.280 76.2000 3.000 54.0900 2.130 12 3 5.200 1.39 28400  
            List price:
            $1,130.49 /each.
            Your price::
            3732935 M1HR200E14W150Z3L300C12 M1HR200E14W150Z3L300C12 50.8000 2.000 38.09 1.5 144.5200 5.690 76.1900 3.001 53.4400 2.104 12 3 3.400 2.63 24600  
              List price:
              $1,224.69 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              方肩铣削

              方肩铣削 • 立铣刀 • Screw-On
              (1 Products)
              • 端面铣削端面铣削
              • 槽铣： 方头立铣槽铣： 方头立铣
              • 侧铣/方肩铣削： 方头立铣侧铣/方肩铣削： 方头立铣
              • 刀柄 — 旋入式刀柄 — 旋入式
              • 铣削 — 贯通式冷却铣削 — 贯通式冷却
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Weight Kilograms Max RPM
              5531913 M4D040Z05M16LN15 M4D040Z05M16LN15   40.0000 1.575 29.0 1.142 17.0000 .6690 M16 40.0000 1.575 24.0000 .9430 15.5000 .6100 5 0.23 18800
                List price:
                $484.07 /each.
                Your price::
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor

                ORIGINAL PRODUCT

                方肩铣削

                方肩铣削 • 套式铣刀
                (8 Products)
                • 端面铣削端面铣削
                • 槽铣： 方头立铣槽铣： 方头立铣
                • 侧铣/方肩铣削： 方头立铣侧铣/方肩铣削： 方头立铣
                • 铣削 — 侧铣和端面铣铣削 — 侧铣和端面铣
                • 铣削 — 贯通式冷却铣削 — 贯通式冷却
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Weight Kilograms Max RPM
                5528632 M4D040Z04S16LN15 M4D040Z04S16LN15 40.0000 1.575 16.0 .63 37.0000 1.457 40.0000 1.575 15.5000 .6100 4 0.21 18800  
                  List price:
                  $468.28 /each.
                  Your price::
                  5528633 M4D050Z05S22LN15 M4D050Z05S22LN15 50.0000 1.968 22.0 .867 42.0000 1.653 40.0000 1.575 15.5000 .6100 5 0.30 16300  
                    List price:
                    $540.73 /each.
                    Your price::
                    5528634 M4D050Z06S22LN15 M4D050Z06S22LN15 50.0000 1.968 22.0 .867 42.0000 1.654 40.0000 1.575 15.5000 .6100 6 0.27 16300  
                      List price:
                      $540.73 /each.
                      Your price::
                      5528635 M4D063Z06S22LN15 M4D063Z06S22LN15 63.0000 2.480 22.0 .867 50.0000 1.969 39.9860 1.574 15.5000 .6100 6 0.50 14200  
                        List price:
                        $599.70 /each.
                        Your price::