Oznámení

Označit vše jako přečtené
Mobile Menu

KM™

Vybrat filtry
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1351)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1347)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1347)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1347)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1347)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1347)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1351)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1351)
  • M Stainless Steel (1351)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1351)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1351)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1351)
  • K Cast Iron (1373)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1373)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1373)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1371)
  • N Non-Ferrous Materials (1309)
    • N1
      Wrought Aluminum
      (1293)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1289)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (877)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1295)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1281)
    • N6
      Carbon, Graphite Composites, CFRP
      (1199)
    • N7
      MMC's
      (1220)
  • S High-Temp Alloys (1372)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1370)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1372)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1370)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1345)
  • H Hardened Materials (1207)
    • H1
      Hardened Materials 44-48 HRC
      (1207)
    • H2
      Hardened Materials 48-55 HRC
      (1125)
    • H3
      Hardened Materials 56-60 HRC
      (1030)
    • H4
      Hardened Materials >60 HRC
      (983)
Applications
Applications
  • Chamfer Turning Chamfer Turning (44)
  • Convex Drilling Convex Drilling (7)
  • Cut-Off Cut-Off (41)
  • Deep Grooving Deep Grooving (41)
  • Drilling Drilling (7)
  • Face Grooving Face Grooving (41)
  • Facing Facing (756)
  • Grooving Grooving (163)
  • ID Facing ID Facing (6)
  • ID Grooving ID Grooving (74)
  • ID Thread Turning ID Thread Turning (128)
  • Inclined Entry Drilling Inclined Entry Drilling (7)
  • Inclined Exit Drilling Inclined Exit Drilling (7)
  • Multiple Direction Cutting Multiple Direction Cutting (903)
  • OD Thread Turning OD Thread Turning (158)
  • Plunge Turning Plunge Turning (50)
  • Profiling Profiling (748)
  • TRN Boring TRN Boring (716)
  • Threading Threading (179)
  • Turning Turning (998)
  • X-Offset Drilling X-Offset Drilling (7)
Cutting Diameter
Cutting Diameter
  • 0.625 in (1)
  • 0.687 in (1)
  • 0.75 in (1)
  • 0.814 in (1)
  • 0.875 in (1)
  • 0.937 in (1)
  • 1.0 in (1)
  • 1.063 in (1)
  • 1.125 in (1)
  • 1.143 in (1)
  • 1.22 in (1)
  • 1.25 in (1)
  • 1.375 in (1)
  • 1.5 in (1)
  • 1.625 in (1)
  • 1.75 in (1)
  • 1.875 in (1)
  • 2.0 in (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (1)
  • 17.45 mm (1)
  • 19.05 mm (1)
  • 20.651 mm (1)
  • 22.225 mm (1)
  • 23.8 mm (1)
  • 25.401 mm (1)
  • 27.0 mm (1)
  • 28.576 mm (1)
  • 29.0 mm (1)
  • 31.0 mm (1)
  • 31.75 mm (1)
  • 34.926 mm (1)
  • 38.1 mm (1)
  • 41.276 mm (1)
  • 44.45 mm (1)
  • 47.625 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min komu Cutting Diameter Max
Type of Thread
Type of Thread
  • 55 (71)
  • 60 (196)
  • ACME (148)
  • API (99)
  • API BUTTRESS (16)
  • API RD (106)
  • BSPT (55)
  • BSW (125)
  • BUTTRESS (125)
  • M (147)
  • NPT (109)
  • NPTF (55)
  • RD DIN 405 (66)
  • STUB ACME (120)
  • TR DIN 103 (66)
  • UN (180)
  • UNJ (109)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1223)
  • Interrupted (687)
  • Lightly Interrupted Cut (1223)
  • Smooth Cut (1225)
  • Varying Depth of Cut (1225)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 47.625 mm (1)
  • 52.401 mm (1)
  • 57.151 mm (1)
  • 61.901 mm (1)
  • 66.675 mm (1)
  • 71.45 mm (1)
  • 76.2 mm (1)
  • 81.0 mm (1)
  • 85.726 mm (1)
  • 87.0 mm (1)
  • 93.0 mm (1)
  • 95.25 mm (1)
  • 104.775 mm (1)
  • 114.301 mm (1)
  • 123.825 mm (1)
  • 133.35 mm (1)
  • 142.875 mm (1)
  • 152.4 mm (1)
Maximum Hole Depth [L4] Min komu Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.875 in (1)
  • 2.063 in (1)
  • 2.25 in (1)
  • 2.437 in (1)
  • 2.625 in (1)
  • 2.813 in (1)
  • 3.0 in (1)
  • 3.189 in (1)
  • 3.375 in (1)
  • 3.426 in (1)
  • 3.661 in (1)
  • 3.75 in (1)
  • 4.125 in (1)
  • 4.5 in (1)
  • 4.875 in (1)
  • 5.25 in (1)
  • 5.625 in (1)
  • 6.0 in (1)
Maximum Hole Depth [L4] Min komu Maximum Hole Depth [L4] Max
Reach
Reach
  • 2.52 in (1)
  • 2.835 in (1)
  • 2.992 in (1)
  • 3.189 in (1)
  • 3.386 in (1)
  • 3.543 in (1)
  • 3.74 in (1)
  • 3.781 in (1)
  • 4.055 in (1)
  • 4.213 in (1)
  • 4.331 in (1)
  • 4.606 in (1)
  • 5.079 in (1)
  • 5.472 in (1)
  • 6.22 in (1)
  • 6.575 in (1)
  • 7.165 in (1)
  • 7.521 in (1)
Reach Min komu Reach Max
Reach
Reach
  • 64.0 mm (1)
  • 72.0 mm (1)
  • 76.0 mm (1)
  • 81.0 mm (1)
  • 86.0 mm (1)
  • 90.0 mm (1)
  • 95.0 mm (1)
  • 96.0 mm (1)
  • 103.0 mm (1)
  • 107.0 mm (1)
  • 110.0 mm (1)
  • 117.0 mm (1)
  • 129.0 mm (1)
  • 139.0 mm (1)
  • 158.0 mm (1)
  • 167.0 mm (1)
  • 182.0 mm (1)
  • 191.0 mm (1)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (65)
  • 48.0 (14)
  • 49.783 (3)
  • 50.0 (3)
  • 61.0 (2)
  • 62.5 (20)
  • 63.0 (8)
  • 72.5 (3)
  • 75.0 (143)
  • 85.0 (4)
  • 90.0 (359)
  • 93.0 (354)
  • 95.0 (342)
  • 107.5 (82)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Cutoff Support Blade A1-A3 (3)
  • KM (973)
Number of Flutes
Number of Flutes
  • 2 (18)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (863)
  • 2.0 (915)
  • 3.0 (249)
  • 4.0 (766)
  • 6.0 (130)
  • 8.0 (434)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (69)
  • 0.002 in (221)
  • 0.003 in (175)
  • 0.004 in (812)
  • 0.005 in (71)
  • 0.006 in (123)
  • 0.007 in (121)
  • 0.008 in (875)
  • 0.01 in (118)
  • 0.011 in (79)
  • 0.012 in (77)
  • 0.014 in (205)
  • 0.015 in (19)
  • 0.016 in (1034)
  • 0.017 in (70)
  • 0.019 in (80)
  • 0.02 in (106)
  • 0.021 in (7)
  • 0.023 in (83)
  • 0.024 in (58)
  • 0.027 in (3)
  • 0.028 in (14)
  • 0.03 in (58)
  • 0.031 in (1169)
  • 0.033 in (5)
  • 0.034 in (4)
  • 0.035 in (80)
  • 0.037 in (19)
  • 0.038 in (3)
  • 0.039 in (115)
  • 0.041 in (8)
  • 0.047 in (1083)
  • 0.049 in (99)
  • 0.055 in (5)
  • 0.06 in (112)
  • 0.062 in (197)
  • 0.063 in (905)
  • 0.069 in (99)
  • 0.078 in (54)
  • 0.079 in (84)
  • 0.08 in (4)
  • 0.089 in (80)
  • 0.094 in (179)
  • 0.095 in (353)
  • 0.098 in (28)
  • 0.099 in (2)
  • 0.125 in (55)
  • 0.126 in (117)
  • 0.157 in (29)
  • 0.188 in (2)
  • 0.197 in (19)
  • 0.237 in (19)
  • 0.25 in (11)
  • 0.315 in (1)
  • 0.394 in (3)
  • 0.492 in (5)
  • 0.63 in (4)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (69)
  • 0.05 mm (221)
  • 0.076 mm (175)
  • 0.1 mm (812)
  • 0.125 mm (71)
  • 0.151 mm (123)
  • 0.176 mm (121)
  • 0.2 mm (875)
  • 0.225 mm (70)
  • 0.25 mm (115)
  • 0.275 mm (79)
  • 0.301 mm (77)
  • 0.325 mm (96)
  • 0.351 mm (189)
  • 0.375 mm (19)
  • 0.4 mm (1034)
  • 0.426 mm (70)
  • 0.45 mm (80)
  • 0.476 mm (26)
  • 0.5 mm (106)
  • 0.525 mm (7)
  • 0.576 mm (83)
  • 0.601 mm (58)
  • 0.65 mm (3)
  • 0.701 mm (14)
  • 0.75 mm (58)
  • 0.775 mm (99)
  • 0.8 mm (1070)
  • 0.826 mm (5)
  • 0.851 mm (4)
  • 0.9 mm (80)
  • 0.925 mm (19)
  • 0.976 mm (3)
  • 1.0 mm (115)
  • 1.05 mm (8)
  • 1.201 mm (1083)
  • 1.25 mm (99)
  • 1.401 mm (5)
  • 1.5 mm (108)
  • 1.526 mm (13)
  • 1.576 mm (197)
  • 1.6 mm (905)
  • 1.75 mm (99)
  • 1.975 mm (54)
  • 2.0 mm (84)
  • 2.025 mm (4)
  • 2.25 mm (80)
  • 2.375 mm (179)
  • 2.401 mm (353)
  • 2.5 mm (28)
  • 2.526 mm (2)
  • 3.176 mm (55)
  • 3.2 mm (117)
  • 4.0 mm (29)
  • 4.775 mm (2)
  • 5.0 mm (19)
  • 6.0 mm (19)
  • 6.351 mm (11)
  • 8.0 mm (1)
  • 10.0 mm (3)
  • 12.5 mm (5)
  • 16.0 mm (4)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Interrupted (18)
  • Stable (18)
  • Unstable (18)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K10M (809)
  • K10P (743)
  • K10U (716)
  • K15U (707)
  • K20K (817)
  • K25M (737)
  • K25P (727)
  • K313 (1174)
  • K420 (737)
  • K68 (1083)
  • KB9610 (721)
  • KBH20 (717)
  • KC5010 (1278)
  • KC5025 (1262)
  • KC5410 (1056)
  • KC5510 (763)
  • KC720 (1003)
  • KC730 (1102)
  • KC7310 (822)
  • KC732 (829)
  • KC8050 (1070)
  • KC810 (1166)
  • KC850 (1198)
  • KC9010 (908)
  • KC9025 (1051)
  • KC910 (1062)
  • KC9105 (957)
  • KC9110 (1221)
  • KC9120 (1028)
  • KC9125 (1096)
  • KC9140 (804)
  • KC9145 (712)
  • KC9215 (774)
  • KC9225 (1025)
  • KC9240 (1022)
  • KC9240NEW (1012)
  • KC9245 (773)
  • KC9315 (1038)
  • KC9320 (1098)
  • KC9325 (928)
  • KC935 (1169)
  • KC950 (1058)
  • KC990 (974)
  • KCK05 (1021)
  • KCK05B (861)
  • KCK15 (951)
  • KCK15B (994)
  • KCK20 (1113)
  • KCK20B (1128)
  • KCM15 (977)
  • KCM15B (911)
  • KCM25 (1045)
  • KCM25B (969)
  • KCM35 (876)
  • KCP05 (937)
  • KCP10 (1090)
  • KCP10B (1173)
  • KCP25 (1104)
  • KCP25B (1187)
  • KCP25C (884)
  • KCP30 (1016)
  • KCP30B (734)
  • KCP40B (735)
  • KCPK05 (750)
  • KCS10B (933)
  • KCU10 (1214)
  • KCU25 (1195)
  • KT175 (817)
  • KT315 (1067)
  • KU10T (981)
  • KU30T (1109)
  • KY1320 (713)
  • KY3000 (752)
  • KY3500 (758)
  • KYHK15B (697)
  • KYK35 (741)
  • NL250 (756)
  • TN10P (845)
  • TN15M (734)
  • TN20K (762)
  • TN20P (811)
  • TN30M (773)
  • TN5015 (713)
  • TN5120 (709)
  • TN7010 (744)
  • TN7015 (770)
  • TN7025 (763)
  • TN7110 (814)
  • TN7115 (735)
  • TN8025 (712)
  • WK05CT (771)
  • WK20CT (866)
  • WM15CT (849)
  • WM25CT (858)
  • WP15CT (887)
  • WP25CT (913)
  • WP35CT (797)
  • WS10PT (735)
  • WS25PT (745)
  • WU10HT (771)
Hand Of Tool
Hand Of Tool
  • L (438)
  • N (52)
  • N - Neutral (3)
  • R (483)
Wiper Insert
Wiper Insert
  • N (1360)
  • Y (754)
Drill Type
Drill Type
  • 86-01 (18)
F Dimension
F Dimension
  • 0.0 mm (54)
  • 1.701 mm (1)
  • 2.0 mm (2)
  • 4.0 mm (1)
  • 5.0 mm (1)
  • 5.75 mm (3)
  • 5.801 mm (3)
  • 7.0 mm (15)
  • 7.351 mm (3)
  • 7.525 mm (3)
  • 8.0 mm (34)
  • 9.0 mm (19)
  • 10.0 mm (68)
  • 11.0 mm (31)
  • 12.5 mm (36)
  • 13.0 mm (32)
  • 16.0 mm (38)
  • 17.0 mm (92)
  • 22.0 mm (128)
  • 24.0 mm (13)
  • 25.3 mm (1)
  • 27.0 mm (129)
  • 28.5 mm (2)
  • 30.0 mm (18)
  • 32.0 mm (2)
  • 35.0 mm (66)
  • 38.0 mm (18)
  • 43.0 mm (62)
  • 48.0 mm (17)
  • 53.0 mm (49)
  • 59.0 mm (2)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.0 in (54)
  • 0.067 in (1)
  • 0.079 in (2)
  • 0.157 in (1)
  • 0.197 in (1)
  • 0.226 in (3)
  • 0.228 in (3)
  • 0.276 in (15)
  • 0.289 in (3)
  • 0.296 in (3)
  • 0.315 in (34)
  • 0.354 in (19)
  • 0.394 in (68)
  • 0.433 in (31)
  • 0.492 in (36)
  • 0.512 in (32)
  • 0.63 in (38)
  • 0.669 in (92)
  • 0.866 in (128)
  • 0.946 in (13)
  • 0.996 in (1)
  • 1.063 in (129)
  • 1.122 in (2)
  • 1.181 in (18)
  • 1.26 in (2)
  • 1.379 in (66)
  • 1.496 in (18)
  • 1.693 in (62)
  • 1.891 in (17)
  • 2.087 in (49)
  • 2.323 in (2)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (51)
  • 11.101 mm (3)
  • 11.15 mm (3)
  • 13.0 mm (15)
  • 14.25 mm (3)
  • 16.0 mm (19)
  • 18.5 mm (5)
  • 20.0 mm (26)
  • 25.0 mm (37)
  • 32.0 mm (87)
  • 34.0 mm (6)
  • 40.0 mm (89)
  • 41.301 mm (20)
  • 44.0 mm (18)
  • 47.6 mm (20)
  • 50.0 mm (89)
  • 54.0 mm (51)
  • 56.625 mm (20)
  • 57.2 mm (11)
  • 60.0 mm (2)
  • 63.0 mm (32)
  • 64.0 mm (2)
  • 70.0 mm (54)
  • 74.0 mm (4)
  • 80.0 mm (59)
  • 86.0 mm (91)
  • 88.9 mm (40)
  • 90.0 mm (6)
  • 94.0 mm (2)
  • 100.0 mm (46)
  • 104.0 mm (2)
  • 106.0 mm (71)
  • 118.0 mm (2)
  • 120.0 mm (3)
  • 130.0 mm (2)
  • 139.701 mm (20)
  • 150.0 mm (1)
  • 174.601 mm (20)
  • 209.601 mm (11)
  • 222.3 mm (11)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (51)
  • 0.437 in (3)
  • 0.439 in (3)
  • 0.512 in (15)
  • 0.561 in (3)
  • 0.63 in (19)
  • 0.728 in (5)
  • 0.787 in (26)
  • 0.984 in (37)
  • 1.26 in (87)
  • 1.339 in (6)
  • 1.575 in (89)
  • 1.627 in (20)