Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zpět k řešení

Úprava řešení

Přidání řešení

Název řešení: {{SolutionName}}

KM4X63™

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (121)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (121)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (121)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (121)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (121)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (121)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (121)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (121)
  • M Stainless Steel (121)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (121)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (121)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (121)
  • K Cast Iron (121)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (121)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (121)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (121)
  • N Non-Ferrous Materials (119)
    • N1
      Wrought Aluminum
      (119)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (119)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (80)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (118)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (119)
    • N6
      Carbon, Graphite Composites, CFRP
      (114)
    • N7
      MMC's
      (108)
  • S High-Temp Alloys (121)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (121)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (121)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (121)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (121)
  • H Hardened Materials (111)
    • H1
      Hardened Materials 44-48 HRC
      (111)
    • H2
      Hardened Materials 48-55 HRC
      (104)
    • H3
      Hardened Materials 56-60 HRC
      (96)
    • H4
      Hardened Materials >60 HRC
      (95)
Applications
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (12)
  • Face Grooving Face Grooving (6)
  • Facing Facing (90)
  • Grooving Grooving (12)
  • ID Facing ID Facing (55)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (14)
  • Multiple Direction Cutting Multiple Direction Cutting (55)
  • OD Thread Turning OD Thread Turning (18)
  • Plunge Turning Plunge Turning (5)
  • Profiling Profiling (51)
  • TRN Boring TRN Boring (89)
  • Threading Threading (24)
  • Turning Turning (97)
Type of Thread
Type of Thread
  • 55 (8)
  • 60 (18)
  • ACME (18)
  • API (16)
  • API BUTTRESS (4)
  • API RD (10)
  • BSPT (4)
  • BSW (14)
  • BUTTRESS (10)
  • M (14)
  • NPT (10)
  • NPTF (4)
  • RD DIN 405 (8)
  • STUB ACME (14)
  • TR DIN 103 (8)
  • UN (14)
  • UNJ (10)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (103)
  • Interrupted (66)
  • Lightly Interrupted Cut (103)
  • Smooth Cut (103)
  • Varying Depth of Cut (103)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 0.0 (2)
  • 45.0 (3)
  • 48.0 (5)
  • 49.683 (2)
  • 50.0 (2)
  • 72.5 (1)
  • 75.0 (6)
  • 90.0 (37)
  • 93.0 (25)
  • 95.0 (30)
  • 107.5 (10)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (75)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (77)
  • 2.0 (78)
  • 3.0 (32)
  • 4.0 (57)
  • 6.0 (16)
  • 8.0 (27)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (3)
  • 0.002 in (24)
  • 0.003 in (14)
  • 0.004 in (78)
  • 0.005 in (7)
  • 0.006 in (13)
  • 0.007 in (11)
  • 0.008 in (77)
  • 0.01 in (11)
  • 0.011 in (8)
  • 0.012 in (9)
  • 0.014 in (28)
  • 0.015 in (1)
  • 0.016 in (101)
  • 0.017 in (10)
  • 0.019 in (10)
  • 0.02 in (7)
  • 0.021 in (3)
  • 0.023 in (12)
  • 0.024 in (10)
  • 0.027 in (2)
  • 0.028 in (1)
  • 0.03 in (1)
  • 0.031 in (101)
  • 0.033 in (2)
  • 0.035 in (10)
  • 0.037 in (2)
  • 0.038 in (1)
  • 0.039 in (8)
  • 0.047 in (101)
  • 0.049 in (6)
  • 0.055 in (1)
  • 0.06 in (7)
  • 0.062 in (22)
  • 0.063 in (84)
  • 0.069 in (6)
  • 0.078 in (6)
  • 0.079 in (10)
  • 0.089 in (10)
  • 0.094 in (12)
  • 0.095 in (27)
  • 0.098 in (4)
  • 0.125 in (10)
  • 0.126 in (10)
  • 0.237 in (1)
  • 0.315 in (3)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (3)
  • 0.05 mm (24)
  • 0.076 mm (14)
  • 0.1 mm (78)
  • 0.125 mm (7)
  • 0.151 mm (13)
  • 0.176 mm (11)
  • 0.2 mm (77)
  • 0.225 mm (7)
  • 0.25 mm (11)
  • 0.275 mm (8)
  • 0.301 mm (9)
  • 0.325 mm (13)
  • 0.351 mm (25)
  • 0.375 mm (1)
  • 0.4 mm (101)
  • 0.426 mm (10)
  • 0.45 mm (10)
  • 0.476 mm (3)
  • 0.5 mm (7)
  • 0.525 mm (3)
  • 0.576 mm (12)
  • 0.601 mm (10)
  • 0.65 mm (2)
  • 0.701 mm (1)
  • 0.75 mm (1)
  • 0.775 mm (6)
  • 0.8 mm (95)
  • 0.826 mm (2)
  • 0.9 mm (10)
  • 0.925 mm (2)
  • 0.976 mm (1)
  • 1.0 mm (8)
  • 1.201 mm (101)
  • 1.25 mm (6)
  • 1.401 mm (1)
  • 1.5 mm (6)
  • 1.526 mm (1)
  • 1.576 mm (22)
  • 1.6 mm (84)
  • 1.75 mm (6)
  • 1.975 mm (6)
  • 2.0 mm (10)
  • 2.25 mm (10)
  • 2.375 mm (12)
  • 2.401 mm (27)
  • 2.5 mm (4)
  • 3.176 mm (10)
  • 3.2 mm (10)
  • 6.0 mm (1)
  • 8.0 mm (3)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (57)
  • 241 (16)
  • AC5 (1)
  • CL4 (38)
  • CM2 (56)
  • CM3 (45)
  • CM4 (27)
  • CM5 (1)
  • CPX (57)
  • CW2 (31)
  • CW2015 (56)
  • CW5025 (60)
  • GH1 (2)
  • GX (29)
  • HCK10 (7)
  • HCK20 (1)
  • HK1500 (62)
  • HK35 (7)
  • HT2 (52)
  • HTX (35)
  • HWK15 (7)
  • K00326 (8)
  • K00331 (2)
  • K060 (31)
  • K090 (56)
  • K1 (22)
  • K1010P (2)
  • K10M (85)
  • K10P (77)
  • K10U (76)
  • K15 (3)
  • K15U (76)
  • K20K (79)
  • K21 (29)
  • K25M (74)
  • K25P (68)
  • K2885 (6)
  • K313 (109)
  • K35P (50)
  • K420 (55)
  • K45 (37)
  • K4H (6)
  • K68 (98)
  • K8735 (8)
  • KB1340 (25)
  • KB1345 (41)
  • KB1610 (49)
  • KB1625 (45)
  • KB1630 (39)
  • KB5610 (48)
  • KB5625 (51)
  • KB5630 (32)
  • KB9610 (70)
  • KB9640 (35)
  • KBH10 (64)
  • KBH10B (39)
  • KBH20 (72)
  • KBH20B (39)
  • KBK35 (16)
  • KC210 (52)
  • KC250 (55)
  • KC5010 (113)
  • KC5020P (8)
  • KC5025 (118)
  • KC5410 (104)
  • KC5510 (68)
  • KC5525 (57)
  • KC710 (30)
  • KC720 (94)
  • KC722 (28)
  • KC730 (101)
  • KC7310 (76)
  • KC732 (85)
  • KC8050 (99)
  • KC810 (107)
  • KC850 (111)
  • KC9010 (70)
  • KC9025 (95)
  • KC910 (100)
  • KC9105 (97)
  • KC9110 (106)
  • KC9120 (90)
  • KC9125 (96)
  • KC9125RR (7)
  • KC9140 (68)
  • KC9145 (66)
  • KC9210 (15)
  • KC9215 (68)
  • KC9225 (95)
  • KC9240 (91)
  • KC9240NEW (91)
  • KC9245 (68)
  • KC9315 (99)
  • KC9320 (98)
  • KC9325 (81)
  • KC935 (105)
  • KC950 (98)
  • KC990 (76)
  • KCD25 (35)
  • KCK05 (95)
  • KCK05B (82)
  • KCK15 (88)
  • KCK15B (96)
  • KCK20 (101)
  • KCK20B (101)
  • KCM15 (87)
  • KCM15B (89)
  • KCM25 (99)
  • KCM25B (88)
  • KCM35 (85)
  • KCM35B (60)
  • KCP05 (95)
  • KCP05B (64)
  • KCP10 (96)
  • KCP10B (106)
  • KCP15 (6)
  • KCP25 (99)
  • KCP25B (106)
  • KCP25C (99)
  • KCP30 (88)
  • KCP30B (72)
  • KCP40 (66)
  • KCP40B (72)
  • KCPK05 (69)
  • KCS10 (36)
  • KCS10B (90)
  • KCU10 (109)
  • KCU10B (95)
  • KCU25 (107)
  • KD050 (54)
  • KD081 (57)
  • KD100 (46)
  • KD120 (55)
  • KD1400 (48)
  • KD1405 (30)
  • KD1425 (62)
  • KM1 (29)
  • KMF (16)
  • KS15 (24)
  • KT1120 (12)
  • KT125 (62)
  • KT150 (39)
  • KT175 (66)
  • KT315 (101)
  • KT325 (52)
  • KTP10 (22)
  • KU10 (8)
  • KU10T (93)
  • KU25T (12)
  • KU30T (97)
  • KY1310 (45)
  • KY1320 (66)
  • KY1540 (37)
  • KY1615 (57)
  • KY2000 (35)
  • KY2100 (31)
  • KY3000 (66)
  • KY3400 (51)
  • KY3500 (66)
  • KY4000 (27)
  • KY4300 (28)
  • KY4400 (66)
  • KYHK15B (66)
  • KYK10 (41)
  • KYK25 (51)
  • KYK35 (66)
  • KYS25 (31)
  • KYS30 (41)
  • MC2 (1)
  • NL200 (31)
  • NL250 (68)
  • NL300 (53)
  • NL400 (30)
  • NL920 (63)
  • P25 (32)
  • PB100 (24)
  • PB170 (27)
  • PB250 (29)
  • PB300 (16)
  • PD100 (7)
  • PD50 (7)
  • PN120 (1)
  • PS5 (33)
  • SP0819 (51)
  • SP0A00 (7)
  • SP0PW3 (5)
  • SP3019 (43)
  • SP4019 (56)
  • SP4066 (1)
  • SP61EJ (7)
  • THM (47)
  • THM-X (45)
  • THMF-X (23)
  • TN10P (93)
  • TN10U (81)
  • TN15M (85)
  • TN15U (76)
  • TN2000 (67)
  • TN20K (85)
  • TN20P (87)
  • TN30M (87)
  • TN30P (66)
  • TN4000 (60)
  • TN5015 (78)
  • TN5020 (80)
  • TN5105 (77)
  • TN5120 (88)
  • TN6010 (60)
  • TN6025 (73)
  • TN7005 (65)
  • TN7010 (88)
  • TN7015 (88)
  • TN7025 (88)
  • TN7035 (78)
  • TN7105 (63)
  • TN7110 (96)
  • TN7115 (88)
  • TN7125 (80)
  • TN7135 (78)
  • TN8025 (81)
  • TTI15 (42)
  • TTM (6)
  • TTM09 (20)
  • TTR (42)
  • TTS (39)
  • TTX (45)
  • W00342 (7)
  • WBH10C (64)
  • WBH10P (32)
  • WBH10U (49)
  • WBH20P (69)
  • WBH25P (39)
  • WBH25U (60)
  • WBH30P (32)
  • WBK40U (25)
  • WBK45U (52)
  • WDN00U (24)
  • WDN25U (48)
  • WK05CT (81)
  • WK15CT (67)
  • WK20CT (88)
  • WM15CT (87)
  • WM25CT (87)
  • WM35CT (68)
  • WP05CT (26)
  • WP15CT (88)
  • WP20TT (4)
  • WP25CT (88)
  • WP35CT (82)
  • WS10PT (81)
  • WS25PT (76)
  • WU05PT (13)
  • WU10HT (90)
  • WU10PT (73)
  • WU25PT (71)
  • X00511 (16)
  • X00580 (16)
  • X00581 (16)
  • X00582 (16)
  • X00583 (16)
  • X00584 (16)
  • X00585 (16)
  • X00586 (16)
  • X00591 (16)
  • X00592 (16)
  • X00593 (16)
  • X00594 (16)
  • X00596 (16)
  • X00597 (16)
  • X00599 (16)
Hand Of Tool
Hand Of Tool
  • L (37)
  • N (2)
  • R (36)
Wiper Insert
Wiper Insert
  • N (121)
  • Y (47)
F Dimension
F Dimension
  • 0.0 mm (1)
  • 8.0 mm (1)
  • 17.0 mm (6)
  • 22.0 mm (12)
  • 27.0 mm (10)
  • 35.0 mm (6)
  • 38.0 mm (4)
  • 43.0 mm (35)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.0 in (1)
  • 0.315 in (1)
  • 0.669 in (6)
  • 0.866 in (12)
  • 1.063 in (10)
  • 1.379 in (6)
  • 1.496 in (4)
  • 1.693 in (35)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (4)
  • 32.0 mm (6)
  • 40.0 mm (12)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 50.0 mm (10)
  • 57.2 mm (2)
  • 63.0 mm (6)
  • 80.0 mm (4)
  • 86.0 mm (38)
  • 88.9 mm (2)
  • 100.0 mm (12)
  • 139.701 mm (2)
  • 174.601 mm (2)
  • 209.601 mm (2)
  • 222.3 mm (2)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (4)
  • 1.26 in (6)
  • 1.575 in (12)
  • 1.627 in (2)
  • 1.874 in (2)
  • 1.969 in (10)
  • 2.253 in (2)
  • 2.48 in (6)
  • 3.15 in (4)
  • 3.386 in (38)
  • 3.5 in (2)
  • 3.938 in (12)
  • 5.5 in (2)
  • 6.875 in (2)
  • 8.252 in (2)
  • 8.752 in (2)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (12)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (12)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (18)
  • E (25)
  • S (32)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (47)
  • NEGATIVE-ZERO (11)
  • NEUTRAL (ZERO) (15)
Maximum Bore Depth
Maximum Bore Depth
  • 2.757 in (42)
  • 3.477 in (6)
  • 4.42 in (12)
  • 4.485 in (3)
  • 4.49 in (7)
  • 4.529 in (12)
  • 5.671 in (6)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 70.0 mm (42)
  • 88.325 mm (6)
  • 112.275 mm (12)
  • 113.926 mm (3)
  • 114.051 mm (7)
  • 115.0 mm (12)
  • 144.05 mm (6)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (40)
frontEnd
Adapter Front-End
Adapter Front-End
  • BORING BAR ADAPTER (2)
  • CARTRIDGE MOUNT (8)
  • COMBI SHELL ADAPTER (5)
  • CUTOFF SUPPORT BLADE (6)
  • END MILL ADAPTER (27)
  • ER COLLET CHUCK (12)
  • HYDRAULIC CHUCK (34)
  • HYDRAULIC CHUCK-HIGH TORQUE (4)
  • KM MODULAR ADAPTER (10)
  • REDUCER (4)
  • SCREW-ON ADAPTER (19)
  • SHELL MILL ADAPTER (9)
  • SHRINK FIT ADAPTER (57)
  • SQUARE SHANK ADAPTER (8)
  • WHISTLE DRIVE ADAPTER (1)
  • WHISTLE NOTCH ADAPTER (9)
Clamp Style
Clamp Style
  • D (33)
  • M (4)
  • N (20)
  • P (31)
  • S (35)