Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Modulární nože

Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (114)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (114)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (114)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (114)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (114)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (114)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (114)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (114)
  • M Stainless Steel (114)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (114)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (114)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (114)
  • K Cast Iron (114)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (114)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (114)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (114)
  • N Non-Ferrous Materials (114)
    • N1
      Wrought Aluminum (114)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (114)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (59)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (114)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (114)
    • N6
      Carbon, Graphite Composites, CFRP (114)
    • N7
      MMC's (59)
  • S High-Temp Alloys (114)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (114)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (114)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (114)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (114)
  • H Hardened Materials (114)
    • H1
      Hardened Materials 44-48 HRC (114)
    • H2
      Hardened Materials 48-55 HRC (114)
    • H3
      Hardened Materials 56-60 HRC (71)
    • H4
      Hardened Materials >60 HRC (71)
Vybrat první volbu
  • IN (1)
  • US (1)
Applications
Applications
  • Face Grooving Face Grooving (110)
  • Grooving Grooving (4)
  • Multiple Direction Cutting Multiple Direction Cutting (114)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (114)
  • Lightly Interrupted Cut (114)
  • Smooth Cut (114)
  • Varying Depth of Cut (114)
Over All Length [L]
Over All Length [L]
  • 2.077 in (31)
  • 2.156 in (46)
  • 2.269 in (20)
  • 2.352 in (14)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 52.75 mm (31)
  • 54.75 mm (46)
  • 57.625 mm (20)
  • 59.75 mm (14)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (77)
  • 0.016 in (85)
  • 0.031 in (55)
  • 0.034 in (18)
  • 0.039 in (28)
  • 0.041 in (22)
  • 0.047 in (21)
  • 0.048 in (5)
  • 0.06 in (30)
  • 0.063 in (26)
  • 0.079 in (19)
  • 0.08 in (18)
  • 0.094 in (18)
  • 0.098 in (15)
  • 0.099 in (15)
  • 0.119 in (12)
  • 0.12 in (12)
  • 0.125 in (12)
  • 0.156 in (5)
  • 0.157 in (5)
  • 0.158 in (5)
  • 0.187 in (4)
  • 0.188 in (4)
  • 0.197 in (4)
  • 0.198 in (4)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (77)
  • 0.4 mm (85)
  • 0.8 mm (55)
  • 0.851 mm (18)
  • 1.0 mm (28)
  • 1.05 mm (22)
  • 1.201 mm (21)
  • 1.225 mm (5)
  • 1.5 mm (30)
  • 1.526 mm (26)
  • 1.6 mm (26)
  • 2.0 mm (19)
  • 2.025 mm (18)
  • 2.375 mm (18)
  • 2.5 mm (15)
  • 2.526 mm (15)
  • 3.0 mm (12)
  • 3.026 mm (12)
  • 3.176 mm (12)
  • 3.975 mm (5)
  • 4.0 mm (5)
  • 4.025 mm (5)
  • 4.75 mm (4)
  • 4.775 mm (4)
  • 5.0 mm (4)
  • 5.025 mm (4)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K1025 (35)
  • K313 (103)
  • KB1630 (71)
  • KB5625 (71)
  • KBH20 (71)
  • KC5010 (103)
  • KC5025 (103)
  • KC9110 (103)
  • KC9125 (103)
  • KCK20 (80)
  • KCP10 (102)
  • KCP25 (103)
  • KCU10 (114)
  • KCU10B (114)
  • KCU25 (114)
  • KD1405 (59)
  • KMS (41)
  • KT315 (94)
  • KU10 (102)
  • KU30T (71)
  • KY3500 (80)
  • KYS30 (32)
  • SP88F8 (12)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 16.0 mm (2)
  • 20.0 mm (4)
  • 25.0 mm (5)
  • 36.0 mm (5)
  • 42.0 mm (5)
  • 48.0 mm (3)
  • 50.0 mm (3)
  • 52.0 mm (3)
  • 58.0 mm (4)
  • 60.0 mm (4)
  • 64.0 mm (4)
  • 68.0 mm (4)
  • 70.0 mm (4)
  • 80.0 mm (7)
  • 90.0 mm (6)
  • 92.0 mm (3)
  • 100.0 mm (3)
  • 120.0 mm (8)
  • 130.0 mm (4)
  • 132.0 mm (4)
  • 184.0 mm (3)
  • 200.0 mm (8)
  • 250.0 mm (6)
  • 290.0 mm (8)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.63 in (2)
  • 0.787 in (4)
  • 0.984 in (5)
  • 1.417 in (5)
  • 1.655 in (5)
  • 1.891 in (3)
  • 1.969 in (3)
  • 2.047 in (3)
  • 2.283 in (4)
  • 2.362 in (4)
  • 2.52 in (4)
  • 2.677 in (4)
  • 2.757 in (4)
  • 3.15 in (7)
  • 3.543 in (6)
  • 3.622 in (3)
  • 3.938 in (3)
  • 4.724 in (8)
  • 5.118 in (4)
  • 5.197 in (4)
  • 7.244 in (3)
  • 7.875 in (8)
  • 9.843 in (6)
  • 11.417 in (8)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (2)
  • 0.984 in (4)
  • 1.379 in (1)
  • 1.417 in (4)
  • 1.811 in (1)
  • 1.891 in (4)
  • 2.126 in (2)
  • 2.283 in (3)
  • 2.52 in (3)
  • 2.835 in (3)
  • 2.914 in (3)
  • 3.307 in (4)
  • 3.701 in (4)
  • 3.938 in (8)
  • 4.409 in (4)
  • 4.882 in (3)
  • 5.354 in (4)
  • 5.906 in (3)
  • 6.299 in (4)
  • 7.875 in (2)
  • 8.346 in (3)
  • 10.0 in (4)
  • 11.811 in (12)
  • 39.331 in (11)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (2)
  • 25.0 mm (4)
  • 35.0 mm (1)
  • 36.0 mm (4)
  • 46.0 mm (1)
  • 48.0 mm (4)
  • 54.0 mm (2)
  • 58.0 mm (3)
  • 64.0 mm (3)
  • 72.0 mm (3)
  • 74.0 mm (3)
  • 84.0 mm (4)
  • 94.0 mm (4)
  • 100.0 mm (8)
  • 112.0 mm (4)
  • 124.0 mm (3)
  • 136.0 mm (4)
  • 150.0 mm (3)
  • 160.0 mm (4)
  • 200.0 mm (2)
  • 212.0 mm (3)
  • 254.0 mm (4)
  • 300.0 mm (12)
  • 999.0 mm (11)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
frontEnd
Cutting Width
Cutting Width
  • 0.079 in (28)
  • 0.081 in (22)
  • 0.084 in (28)
  • 0.094 in (1)
  • 0.095 in (1)
  • 0.097 in (1)
  • 0.098 in (1)
  • 0.104 in (1)
  • 0.119 in (30)
  • 0.12 in (30)
  • 0.125 in (26)
  • 0.128 in (26)
  • 0.157 in (19)
  • 0.159 in (19)
  • 0.187 in (18)
  • 0.19 in (18)
  • 0.197 in (15)
  • 0.199 in (15)
  • 0.237 in (12)
  • 0.239 in (12)
  • 0.25 in (12)
  • 0.253 in (12)
  • 0.312 in (5)
  • 0.313 in (5)
  • 0.315 in (5)
  • 0.316 in (5)
  • 0.317 in (5)
  • 0.375 in (4)
  • 0.379 in (4)
  • 0.394 in (4)
  • 0.396 in (4)
Cutting Width Min komu Cutting Width Max
Cutting Width
Cutting Width
  • 2.0 mm (28)
  • 2.051 mm (22)
  • 2.125 mm (28)
  • 2.375 mm (1)
  • 2.401 mm (1)
  • 2.475 mm (1)
  • 2.5 mm (1)
  • 2.625 mm (1)
  • 3.0 mm (30)
  • 3.051 mm (30)
  • 3.176 mm (26)
  • 3.25 mm (26)
  • 4.0 mm (19)
  • 4.05 mm (19)
  • 4.75 mm (18)
  • 4.825 mm (18)
  • 5.0 mm (15)
  • 5.051 mm (15)
  • 6.0 mm (12)
  • 6.051 mm (12)
  • 6.351 mm (12)
  • 6.426 mm (12)
  • 7.926 mm (5)
  • 7.95 mm (5)
  • 8.0 mm (5)
  • 8.025 mm (5)
  • 8.05 mm (5)
  • 9.525 mm (4)
  • 9.625 mm (4)
  • 10.0 mm (4)
  • 10.05 mm (4)
Cutting Width Min komu Cutting Width Max
Cartridge Size
Cartridge Size
  • 50 (93)
  • 65 (21)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.473 in (26)
  • 0.551 in (52)
  • 0.748 in (15)
  • 0.946 in (20)
  • 1.024 in (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 12.0 mm (26)
  • 14.0 mm (52)
  • 19.0 mm (15)
  • 24.0 mm (20)
  • 26.0 mm (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (71)
  • B L (71)
  • C N (80)
  • D P (59)
  • H T (94)
  • H W (114)
No filters matching ""

A4M-A S VNITŘNÍ PODPĚROU

(44) A4M-A S VNITŘNÍ PODPĚROU

A4M-S-B s vnější podpěrou (čelní zapichování malých průměrů) metrické

(66) A4M-S-B s vnější podpěrou (čelní zapichování malých průměrů) metrické

A4M-M

(4) A4M-M
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Děkujeme za úspěšnou registraci. Nyní máte okamžitý přístup k přihlášení a můžete stránky používat.

You are about to leave the Solution building process.

Are you sure you want to leave?