Downloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 5661185 |
| ISO katalogové ID | ODMT0404APEN41 |
| ANSI katalogové ID | ODMT0404APEN41 |
| Grade | SP6519 |
| [D] Insert IC Size | 12.8 mm |
| [D] Insert IC Size | 0.504 in |
| [S] Insert Thickness | 4.76 mm |
| [S] Insert Thickness | 0.187 in |
| [BS] Corner Facet Length | 1.5 mm |
| [BS] Corner Facet Length | 0.058 in |
| [Rε] Corner Radius | 0.2 mm |
| [Rε] Corner Radius | 0.008 in |
| Average Chip Thickness [HM] | 0.06 mm |
| Average Chip Thickness [HM] | 0.002 in |
Karbidy
SP6519
Coated carbide grade with PVD TiAlN nano-composite coating on a tough substrate. Primarily for use in general and heavy machining, dry and wet.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..44 | 0,14 | 0,35 | 0,58 | 0,10 | 0,25 | 0,41 | 0,08 | 0,19 | 0,31 | 0,07 | 0,17 | 0,28 | 0,06 | 0,15 | 0,25 | .E..44 |
| .E..412 | 0,16 | 0,41 | 0,69 | 0,12 | 0,30 | 0,50 | 0,09 | 0,23 | 0,38 | 0,08 | 0,20 | 0,33 | 0,07 | 0,18 | 0,30 | .E..412 |
| .E..41 | 0,18 | 0,51 | 0,81 | 0,13 | 0,36 | 0,58 | 0,10 | 0,28 | 0,44 | 0,09 | 0,24 | 0,39 | 0,08 | 0,22 | 0,35 | .E..41 |
| .S..N | 0,46 | 0,81 | 1,15 | 0,33 | 0,58 | 0,83 | 0,25 | 0,44 | 0,63 | 0,22 | 0,39 | 0,55 | 0,20 | 0,35 | 0,50 | .S..N |
| Materiálová skupina | SP6519 | X500 | X700 | |||||||
| P | 1 | 355 | 260 | 155 | 325 | 240 | 155 | – | – | – |
| 2 | 310 | 230 | 140 | 290 | 215 | 140 | – | – | – | |
| 3 | 275 | 200 | 120 | 250 | 185 | 120 | – | – | – | |
| 4 | 210 | 150 | 90 | 190 | 145 | 90 | – | – | – | |
| 5 | 170 | 125 | 85 | 155 | 120 | 85 | 160 | 125 | 85 | |
| 6 | 145 | 100 | 60 | 130 | 95 | 60 | 140 | 100 | 60 | |
| M | 1 | 325 | 235 | 140 | 300 | 220 | 140 | 310 | 230 | 140 |
| 2 | 280 | 205 | 125 | 265 | 190 | 120 | 275 | 205 | 125 | |
| 3 | 235 | 170 | 100 | 215 | 155 | 95 | 230 | 170 | 100 | |
| K | 1 | 355 | 265 | 170 | 310 | 265 | 205 | – | – | – |
| 2 | 290 | 210 | 130 | 265 | 215 | 155 | – | – | – | |
| 3 | 265 | 190 | 120 | 205 | 170 | 120 | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| Materiálová skupina | SP6519 | X500 | X700 | |||||||
| P | 1 | 285 | 210 | 125 | 260 | 190 | 125 | – | – | – |
| 2 | 250 | 185 | 110 | 230 | 170 | 110 | – | – | – | |
| 3 | 220 | 160 | 95 | 200 | 150 | 95 | – | – | – | |
| 4 | 170 | 120 | 70 | 150 | 115 | 70 | – | – | – | |
| 5 | 135 | 100 | 70 | 125 | 95 | 70 | 130 | 100 | 70 | |
| 6 | 115 | 80 | 50 | 105 | 75 | 50 | 110 | 80 | 50 | |
| M | 1 | 260 | 190 | 110 | 240 | 175 | 110 | 250 | 185 | 110 |
| 2 | 225 | 165 | 100 | 210 | 150 | 95 | 220 | 165 | 100 | |
| 3 | 190 | 135 | 80 | 170 | 125 | 75 | 185 | 135 | 80 | |
| K | 1 | 285 | 210 | 135 | 250 | 210 | 165 | – | – | – |
| 2 | 230 | 170 | 105 | 210 | 170 | 125 | – | – | – | |
| 3 | 210 | 150 | 95 | 165 | 135 | 95 | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| S | 1 | 50 | 40 | 25 | 50 | 30 | 25 | 50 | 40 | 25 |
| 2 | 50 | 30 | 20 | 45 | 30 | 20 | 45 | 30 | 20 | |
| 3 | 50 | 40 | 25 | 50 | 40 | 25 | 50 | 40 | 25 | |
| 4 | 75 | 55 | 35 | 70 | 50 | 30 | 70 | 50 | 35 | |
| H | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?