Counter Sinking/ Stroke Chamfering
Drilling
Drilling: Inclined Exit
Tool Dimensions: 2flute/2margin/coolant
Drilling - Through Coolant
Counter BoringDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 7137518 |
| ISO katalogové ID | B343S03400HPG |
| ANSI katalogové ID | B343S03400HPG |
| Grade | KCU15 |
| [D1] Drill Diameter M | 3.4 mm |
| [D1] Drill Diameter M | 0.1339 in |
| [D] Adapter / Shank / Bore Diameter | 4 mm |
| [D] Adapter / Shank / Bore Diameter | 0.1575 in |
| [L] Overall Length | 55 mm |
| [L] Overall Length | 2.1654 in |
| [L7M] Adjustable Length Minimum | 1 mm |
| [L7M] Adjustable Length Minimum | 0.0394 in |
| [L7MAX] Adjustable Length Maximum | 10 mm |
| [L7MAX] Adjustable Length Maximum | 0.3937 in |
| [L5] Drill Point Length | 0.64 mm |
| [L5] Drill Point Length | 0.0252 in |
Counter Sinking/ Stroke ChamferingDrillingDrilling: Inclined ExitTool Dimensions: 2flute/2margin/coolantDrilling - Through CoolantCounter BoringVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Materiálová skupina |  |  | |||||||||||
| Řezná rychlost | Metrické | ||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Min | Počáteční hodnota | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 18,0 | |||
| 2 | 90 | 115 | 140 | mm/ot | 0,07–0,13 | 0,08–0,17 | 0,10–0,19 | 0,13–0,23 | 0,15–0,27 | 0,17–0,30 | 0,19–0,35 | 0,22–0,39 | |
| 1 | 100 | 140 | 180 | mm/ot | 0,07–0,16 | 0,08–0,19 | 0,10–0,23 | 0,13–0,29 | 0,15–0,33 | 0,17–0,37 | 0,19–0,44 | 0,22–0,44 | |
| mm/ot | |||||||||||||
| 3 | 80 | 100 | 120 | mm/ot | 0,10–0,16 | 0,11–0,19 | 0,13–0,23 | 0,16–0,29 | 0,19–0,33 | 0,21–0,37 | 0,25–0,44 | 0,28–0,49 | |
| 4 | 70 | 90 | 110 | mm/ot | 0,08–0,16 | 0,10–0,19 | 0,11–0,22 | 0,12–0,25 | 0,14–0,29 | 0,16–0,32 | 0,21–0,41 | 0,24–0,46 | |
| 5 | 70 | 85 | 110 | mm/ot | 0,07–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,26 | 0,18–0,31 | 0,21–0,34 | |
| mm/ot | |||||||||||||
| 1 | 100 | 120 | 140 | mm/ot | 0,09 | 0,10 | 0,12 | 0,15 | 0,17 | 0,20 | 0,23 | 0,26 | |
| 2 | 80 | 105 | 130 | mm/ot | 0,09–0,15 | 0,10–0,18 | 0,12–0,21 | 0,15–0,26 | 0,18–0,30 | 0,20–0,33 | 0,23–0,39 | 0,26–0,44 | |
| 3 | 70 | 85 | 100 | mm/ot | 0,08 | 0,10 | 0,11 | 0,14 | 0,16 | 0,18 | 0,21 | 0,23 | |
| Materiálová skupina | | | |||||||||||
| Řezná rychlost | Palcové | ||||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (f) podle průměru | ||||||||||||
| Min | Počáteční hodnota | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| 2 | 295 | 377 | 459 | palce/ot. | .003–.005 | .003–.007 | .004–.007 | .005–.009 | .006–.011 | .007–.012 | .007–.014 | .009–.017 | |
| 1 | 328 | 459 | 591 | palce/ot. | .003–.006 | .003–.007 | .004–.009 | .005–.011 | .006–.013 | .007–.015 | .007–.017 | .009–.017 | |
| 3 | 262 | 328 | 394 | palce/ot. | .004–.006 | .004–.007 | .005–.009 | .006–.011 | .007–.013 | .008–.015 | .010–.017 | .011–.019 | |
| 4 | 230 | 295 | 361 | palce/ot. | .003–.006 | .004–.007 | .004–.009 | .005–.010 | .006–.011 | .006–.013 | .008–.016 | .009–.018 | |
| 5 | 230 | 279 | 361 | palce/ot. | .003–.005 | .003–.006 | .004–.006 | .005–.008 | .006–.009 | .006–.010 | .007–.012 | .008–.013 | |
| 1 | 328 | 394 | 459 | palce/ot. | .004–.007 | .004–.008 | .005–.011 | .005–.010 | .007–.014 | .008–.015 | .009–.018 | .010–.020 | |
| 2 | 262 | 345 | 427 | palce/ot. | .004–.006 | .004–.007 | .005–.008 | .006–.010 | .007–.012 | .008–.013 | .009–.015 | .010–.017 | |
| 3 | 230 | 279 | 328 | palce/ot. | .003-.005 | .004-.006 | .004-.007 | .006-.009 | .006-.010 | .007-.012 | .008-.014 | .009-.015 | |
| | ||||||||||||
| Řezná rychlost | Metrické | ||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Materiálová skupina | Min | Počáteční hodnota | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 18,0 | ||
| P | 0 | 140 | 240 | 290 | mm/ot | 0,08–0,15 | 0,09–0,18 | 0,12–0,21 | 0,14–0,29 | 0,15–0,33 | 0,17–0,37 | 0,19–0,43 | 0,22–0,49 |
| 1 | 100 | 140 | 180 | mm/ot | 0,07–0,16 | 0,08–0,19 | 0,10–0,23 | 0,13–0,29 | 0,15–0,33 | 0,17–0,37 | 0,19–0,44 | 0,22–0,44 | |
| 2 | 90 | 115 | 140 | mm/ot | 0,07–0,13 | 0,08–0,17 | 0,10–0,19 | 0,13–0,23 | 0,15–0,27 | 0,17–0,30 | 0,19–0,35 | 0,22–0,39 | |
| 3 | 80 | 100 | 120 | mm/ot | 0,10–0,16 | 0,11–0,19 | 0,13–0,23 | 0,16–0,29 | 0,19–0,33 | 0,21–0,37 | 0,25–0,44 | 0,28–0,49 | |
| 4 | 70 | 90 | 110 | mm/ot | 0,08–0,16 | 0,10–0,19 | 0,11–0,22 | 0,12–0,25 | 0,14–0,29 | 0,16–0,32 | 0,21–0,41 | 0,24–0,46 | |
| 5 | 70 | 85 | 110 | mm/ot | 0,07–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,26 | 0,18–0,31 | 0,21–0,34 | |
| 6 | 60 | 70 | 80 | mm/ot | 0,07–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,26 | 0,18–0,31 | 0,21–0,34 | |
| K | 1 | 100 | 120 | 140 | mm/ot | 0,09 | 0,10 | 0,12 | 0,15 | 0,17 | 0,20 | 0,23 | 0,26 |
| 2 | 80 | 105 | 130 | mm/ot | 0,09–0,15 | 0,10–0,18 | 0,12–0,21 | 0,15–0,26 | 0,18–0,30 | 0,20–0,33 | 0,23–0,39 | 0,26–0,44 | |
| – | 3 | 70 | 85 | 100 | mm/ot | 0,08 | 0,10 | 0,11 | 0,14 | 0,16 | 0,18 | 0,21 | 0,23 |
| tolerance | |||
| D1 | Tolerance h7 | D | tolerance h6 + / - |
| 0,000/-0,012 | 6 | 0,000/-0,008 | |
| 0,000/-0,016 | 8 - 10 | 0,000/-0,009 | |
| 0,000/-0,018 | 12 - 18 | 0,000/-0,011 | |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?