Drilling
Drilling: Inclined Exit
Drilling: Stacked Plates
Tool Dimensions: 2flute/4margin/coolant
DIN number 6535
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°
Drilling Depth: 12x
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 4169275 |
| ISO katalogové ID | B269A08100HP |
| ANSI katalogové ID | B269A08100HP |
| Grade | KCPK15 |
| [D1] Drill Diameter M | 8.1 mm |
| [D1] Drill Diameter M | 0.3189 in |
| [L] Overall Length | 185 mm |
| [L] Overall Length | 7.2835 in |
| [L3] Flute Length | 136 mm |
| [L3] Flute Length | 5.3543 in |
| [L4] Maximum Drilling Depth | 116 mm |
| [L4] Maximum Drilling Depth | 4.5669 in |
| [L5] Drill Point Length | 1.51 mm |
| [L5] Drill Point Length | 0.0594 in |
| [LS] Shank Length | 40 mm |
| [LS] Shank Length | 1.5748 in |
| [D] Adapter / Shank / Bore Diameter | 10 mm |
| [D] Adapter / Shank / Bore Diameter | 0.3937 in |
DrillingDrilling: Inclined ExitDrilling: Stacked PlatesTool Dimensions: 2flute/4margin/coolantDIN number 6535Drilling - Through CoolantThrough Coolant: MQL (Minimum Quantity Lubricant): DrillingShank - Cylindrical Plain ≤h6Helix Angle: 30°Drilling Depth: 12xDrilling: Cross-Hole DrillingKarbidy
KCPK15
Composition: Multilayered PVD TiN-TiAlN coated fine-grain carbide with superior surface finish.
Application: First choice for alloyed and high-alloyed steel and cast iron. A state-of-the-art surface condition enables superior chip evacuation and offers highest level of wear resistance at enhanced material removal rates.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Materiálová skupina |  |  |  | ||||||||||
| Materiálová skupina | Řezná rychlost | Palcové | |||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (f) podle průměru | ||||||||||||
| Min | Počáteční hodnota | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| P | 0 | 360 | 460 | 560 | palce/ot. | .004–.006 | .005–.008 | .006–.008 | .007–.010 | .010–.011 | .008–.014 | .009–.017 | .011–.019 |
| 1 | 330 | 470 | 490 | palce/ot. | .005–.007 | .006–.009 | .007–.009 | .008–.011 | .011–.013 | .009–.016 | .011–.020 | .013–.022 | |
| 2 | 230 | 330 | 360 | palce/ot. | .005–.007 | .005–.008 | .006–.010 | .009–.013 | .009–.015 | .011–.020 | .013–.025 | .015–.030 | |
| 3 | 230 | 300 | 360 | palce/ot. | .005–.007 | .006–.009 | .007–.009 | .008–.011 | .011–.013 | .009–.016 | .011–.020 | .013–.022 | |
| 4 | 200 | 230 | 300 | palce/ot. | .004–.006 | .004–.008 | .006–.008 | .007–.009 | .007–.010 | .008–.013 | .009–.016 | .010–.018 | |
| 5 | 200 | 260 | 300 | palce/ot. | .001–.004 | .002–.004 | .002–.004 | .002–.006 | .003–.007 | .004–.008 | .006–.009 | .006–.010 | |
| 6 | 260 | 490 | 520 | palce/ot. | .003–.005 | .004–.004 | .005–.008 | .006–.011 | .007–.013 | .008–.015 | .009–.017 | .010–.019 | |
| M | 1 | 160 | 200 | 260 | palce/ot. | .002–.003 | .002–.005 | .003–.006 | .004–.007 | .005–.008 | .005–.009 | .006–.009 | .007–.011 |
| 2 | 130 | 160 | 260 | palce/ot. | .002–.003 | .002–.005 | .003–.006 | .004–.007 | .005–.008 | .005–.009 | .006–.009 | .007–.011 | |
| 3 | 130 | 160 | 230 | palce/ot. | .001–.003 | .002–.004 | .002–.006 | .003–.006 | .004–.007 | .005–.008 | .006–.009 | .006–.010 | |
| K | 1 | 300 | 490 | 490 | palce/ot. | .004–.006 | .006–.008 | .008–.012 | .009–.014 | .010–.017 | .012–.018 | .014–.023 | .016–.028 |
| 2 | 260 | 400 | 400 | palce/ot. | .004–.006 | .006–.008 | .008–.012 | .009–.014 | .010–.017 | .012–.018 | .014–.023 | .016–.028 | |
| 3 | 260 | 260 | 460 | palce/ot. | .004–.006 | .006–.008 | .009–.013 | .009–.015 | .010–.018 | .011–.020 | .012–.024 | .013–.028 | |
| Materiálová skupina | | | | ||||||||||
| Řezná rychlost | Metrické | ||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Min | Počáteční hodnota | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 110 | 140 | 170 | mm/ot | 0,10–0,14 | 0,12–0,20 | 0,14–0,20 | 0,17–0,25 | 0,25–0,28 | 0,20–0,35 | 0,23–0,43 | 0,28–0,48 |
| 1 | 100 | 140 | 150 | mm/ot | 0,12–0,17 | 0,14–0,23 | 0,17–0,23 | 0,20–0,29 | 0,29–0,33 | 0,23–0,41 | 0,27–0,50 | 0,33–0,56 | |
| 2 | 70 | 100 | 110 | mm/ot | 0,12–0,17 | 0,12–0,20 | 0,14–0,26 | 0,23–0,32 | 0,24–0,38 | 0,27–0,50 | 0,33–0,63 | 0,39–0,75 | |
| 3 | 70 | 90 | 110 | mm/ot | 0,12–0,17 | 0,14–0,23 | 0,17–0,23 | 0,20–0,29 | 0,29–0,33 | 0,23–0,41 | 0,27–0,50 | 0,33–0,56 | |
| 4 | 60 | 70 | 90 | mm/ot | 0,09–0,14 | 0,11–0,20 | 0,14–0,20 | 0,17–0,23 | 0,17–0,26 | 0,20–0,33 | 0,23–0,41 | 0,26–0,45 | |
| 5 | 60 | 80 | 90 | mm/ot | 0,03–0,11 | 0,04–0,11 | 0,05–0,11 | 0,05–0,14 | 0,08–0,18 | 0,11–0,21 | 0,14–0,24 | 0,16–0,26 | |
| 6 | 80 | 150 | 160 | mm/ot | 0,07–0,13 | 0,11–0,11 | 0,12–0,20 | 0,15–0,28 | 0,17–0,33 | 0,19–0,37 | 0,22–0,43 | 0,25–0,48 | |
| M | 1 | 50 | 60 | 80 | mm/ot | 0,04–0,08 | 0,06–0,13 | 0,08–0,16 | 0,10–0,18 | 0,12–0,20 | 0,13–0,22 | 0,15–0,24 | 0,18–0,28 |
| 2 | 40 | 50 | 80 | mm/ot | 0,04–0,08 | 0,06–0,13 | 0,08–0,16 | 0,10–0,18 | 0,12–0,20 | 0,13–0,22 | 0,15–0,24 | 0,18–0,28 | |
| 3 | 40 | 50 | 70 | mm/ot | 0,03–0,07 | 0,05–0,10 | 0,06–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,20 | 0,14–0,22 | 0,16–0,26 | |
| K | 1 | 90 | 150 | 150 | mm/ot | 0,10–0,15 | 0,14–0,20 | 0,20–0,30 | 0,22–0,36 | 0,26–0,42 | 0,30–0,45 | 0,36–0,59 | 0,40–0,72 |
| 2 | 80 | 120 | 120 | mm/ot | 0,10–0,15 | 0,14–0,20 | 0,20–0,30 | 0,22–0,36 | 0,26–0,42 | 0,30–0,45 | 0,36–0,59 | 0,40–0,72 | |
| 3 | 80 | 80 | 140 | mm/ot | 0,11–0,15 | 0,15–0,21 | 0,22–0,32 | 0,22–0,39 | 0,26–0,45 | 0,28–0,50 | 0,30–0,60 | 0,34–0,72 | |
| | | |||||||||||
| Řezná rychlost | Metrické | ||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Materiálová skupina | Min | Počáteční hodnota | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 110 | 140 | 170 | mm/r | 0,10–0,14 | 0,12–0,20 | 0,14–0,20 | 0,17–0,25 | 0,25–0,28 | 0,20–0,35 | 0,23–0,43 | 0,28–0,48 |
| 1 | 100 | 140 | 150 | mm/r | 0,12–0,17 | 0,14–0,23 | 0,17–0,23 | 0,20–0,29 | 0,29–0,33 | 0,23–0,41 | 0,27–0,50 | 0,33–0,56 | |
| 2 | 70 | 100 | 110 | mm/r | 0,12–0,17 | 0,12–0,20 | 0,14–0,26 | 0,23–0,32 | 0,24–0,38 | 0,27–0,50 | 0,33–0,63 | 0,39–0,75 | |
| 3 | 70 | 90 | 110 | mm/r | 0,12–0,17 | 0,14–0,23 | 0,17–0,23 | 0,20–0,29 | 0,29–0,33 | 0,23–0,41 | 0,27–0,50 | 0,33–0,56 | |
| 4 | 60 | 70 | 90 | mm/r | 0,09–0,14 | 0,11–0,20 | 0,14–0,20 | 0,17–0,23 | 0,17–0,26 | 0,20–0,33 | 0,23–0,41 | 0,26–0,45 | |
| 5 | 60 | 80 | 100 | mm/r | 0,03–0,11 | 0,04–0,11 | 0,05–0,11 | 0,05–0,14 | 0,08–0,18 | 0,11–0,21 | 0,14–0,24 | 0,16–0,26 | |
| 6 | 60 | 70 | 80 | mm/r | 0,03–0,11 | 0,04–0,11 | 0,05–0,11 | 0,05–0,14 | 0,08–0,18 | 0,11–0,21 | 0,14–0,24 | 0,16–0,26 | |
| M | 1 | 50 | 60 | 80 | mm/r | 0,04–0,08 | 0,06–0,13 | 0,08–0,16 | 0,10–0,18 | 0,12–0,20 | 0,13–0,22 | 0,15–0,24 | 0,18–0,28 |
| 2 | 40 | 50 | 80 | mm/r | 0,04–0,08 | 0,06–0,13 | 0,08–0,16 | 0,10–0,18 | 0,12–0,20 | 0,13–0,22 | 0,15–0,24 | 0,18–0,28 | |
| 3 | 40 | 50 | 70 | mm/r | 0,03–0,07 | 0,05–0,10 | 0,06–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,20 | 0,14–0,22 | 0,16–0,26 | |
| K | 1 | 90 | 150 | 150 | mm/r | 0,10–0,15 | 0,14–0,20 | 0,20–0,30 | 0,22–0,36 | 0,26–0,42 | 0,30–0,45 | 0,36–0,59 | 0,40–0,72 |
| 2 | 80 | 120 | 120 | mm/r | 0,10–0,15 | 0,14–0,20 | 0,20–0,30 | 0,22–0,36 | 0,26–0,42 | 0,30–0,45 | 0,36–0,59 | 0,40–0,72 | |
| 3 | 80 | 80 | 140 | mm/r | 0,11–0,15 | 0,15–0,21 | 0,22–0,32 | 0,22–0,39 | 0,26–0,45 | 0,28–0,50 | 0,30–0,60 | 0,34–0,72 | |
| Tolerance • Palcové | ||||
| Rozsah nominálních průměrů | Tolerance D1 m7 | |||
| .0394–.1181 | .0000/-.0004 | .0000/-.0006 | ||
| .0002/.0006 | .0000/-.0003 | |||
| .0002/.0008 | .0000/-.0004 | |||
| .0003/.0010 | .0000/-.0004 | |||
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?