Face Milling
Side Milling/Shoulder Milling: Eased Chamfer
Milling - Side and FaceDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 4032274 |
| ISO katalogové ID | MEGA45D500LN863M6 |
| ANSI katalogové ID | MEGA45D500LN863M6 |
| [D1] Effective Cutting Diameter | 127 mm |
| [D1] Effective Cutting Diameter | 5 in |
| [D1MAX] Maximum Cutting Diameter | 162.34 mm |
| [D1MAX] Maximum Cutting Diameter | 6.391 in |
| [D] Adapter / Shank / Bore Diameter | 38.1 mm |
| [D] Adapter / Shank / Bore Diameter | 1.5 in |
| [D2] Maximum Body Diameter | 170.18 mm |
| [D2] Maximum Body Diameter | 6.7 in |
| [D6] Hub Diameter | 96.77 mm |
| [D6] Hub Diameter | 3.81 in |
| [L] Overall Length | 60.32 mm |
| [L] Overall Length | 2.375 in |
| [AP1MAX] 1st Maximum Cutting Depth | 17.15 mm |
| [AP1MAX] 1st Maximum Cutting Depth | 0.675 in |
| Number of Inserts | 6 |
| Weight Pounds | 9.18 |
| Max RPM | 12520 |
Face MillingSide Milling/Shoulder Milling: Eased ChamferMilling - Side and FaceVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .S..HD | 0,33 | 0,83 | 1,34 | 0,24 | 0,60 | 0,96 | 0,18 | 0,45 | 0,71 | 0,16 | 0,39 | 0,62 | 0,14 | 0,36 | 0,57 | .S..HD |
| .S..HD2 | 0,33 | 0,91 | 1,53 | 0,24 | 0,66 | 1,09 | 0,18 | 0,49 | 0,81 | 0,16 | 0,43 | 0,71 | 0,14 | 0,39 | 0,65 | .S..HD2 |
| Lehké obrábění | Všeobecné použití | Těžké obrábění |
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 | ||||||||||||
| .S..HD | .013 | .033 | .053 | .009 | .023 | .038 | .007 | .018 | .028 | .006 | .015 | .024 | .006 | .014 | .022 | .S..HD |
| .S..HD2 | .013 | .036 | .060 | .009 | .026 | .043 | .007 | .019 | .032 | .006 | .017 | .028 | .006 | .015 | .025 | .S..HD2 |
| Lehké obrábění | Všeobecné použití | Těžké obrábění |
| Materiálová skupina | KC520M | KC725M | KCK15 | KCPK30 | KCPK30 | |||||||||||
| P | 1 | – | – | – | 315 | 275 | 255 | – | – | – | 545 | 475 | 440 | – | – | – |
| 2 | – | – | – | 260 | 230 | 195 | – | – | – | 335 | 305 | 275 | – | – | – | |
| 3 | – | – | – | 240 | 205 | 170 | – | – | – | 305 | 275 | 250 | – | – | – | |
| 4 | – | – | – | 215 | 180 | 145 | – | – | – | 225 | 210 | 190 | – | – | – | |
| 5 | – | – | – | 180 | 160 | 145 | – | – | – | 310 | 275 | 255 | – | – | – | |
| 6 | – | – | – | 160 | 120 | 95 | – | – | – | 190 | 165 | – | – | – | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| K | 1 | 325 | 295 | 260 | – | – | – | 505 | 460 | 410 | 355 | 320 | 285 | – | – | – |
| 2 | 255 | 225 | 215 | – | – | – | 400 | 355 | 330 | 280 | 255 | 230 | – | – | – | |
| 3 | 215 | 190 | 170 | – | – | – | 335 | 300 | 275 | 235 | 210 | 195 | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Materiálová skupina | KC520M | KC725M | KCK15 | KCPK30 | |||||||||
| P | 1 | – | – | – | 1030 | 900 | 840 | – | – | – | 1780 | 1560 | 1450 |
| 2 | – | – | – | 860 | 760 | 640 | – | – | – | 1100 | 1000 | 900 | |
| 3 | – | – | – | 790 | 670 | 550 | – | – | – | 1000 | 900 | 820 | |
| 4 | – | – | – | 710 | 590 | 470 | – | – | – | 740 | 690 | 620 | |
| 5 | – | – | – | 590 | 530 | 470 | – | – | – | 1020 | 910 | 830 | |
| 6 | – | – | – | 520 | 400 | 310 | – | – | – | 620 | 540 | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| K | 1 | 1060 | 960 | 850 | – | – | – | 1660 | 1510 | 1340 | 1160 | 1050 | 940 |
| 2 | 830 | 740 | 700 | – | – | – | 1310 | 1170 | 1090 | 920 | 830 | 760 | |
| 3 | 700 | 620 | 560 | – | – | – | 1100 | 980 | 900 | 770 | 690 | 640 | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| Materiálová skupina | Lehké obrábění | Všeobecné použití | Těžké obrábění | |||
| (Lehká geometrie) | – | (Silná geometrie) | ||||
| Odolnost proti opotřebení |  | Houževnatost | ||||
| Geometrie | Sorta | Geometrie | Sorta | Geometrie | Sorta | |
| P1–P2 | .S..HD | KC725M | .S..HD | KCPK30 | .S..HD2 | KCPM40 |
| P3–P4 | .S..HD | KCPK30 | .S..HD2 | KCPK30 | .S..HD2 | KCPM40 |
| P5–P6 | .S..HD | KC725M | .S..HD2 | KCPK30 | .S..HD2 | KCPM40 |
| M1–M2 | .S..HD | KC725M | .S..HD2 | KCSM40 | .S..HD2 | KCPM40 |
| M3 | .S..HD | KCPK30 | .S..HD2 | KCSM40 | .S..HD2 | KCPM40 |
| K1–K2 | .S..HD | KC520M | .S..HD | KCK15 | .S..HD2 | KC520M |
| K3 | .S..HD | KC520M | .S..HD | KCK15 | .S..HD2 | KC520M |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .S..HD | KC725M | .S..HD2 | KCSM40 | .S..HD2 | KCSM40 |
| S3 | .S..HD | KC725M | .S..HD2 | KCPM40 | .S..HD2 | KCSM40 |
| S4 | .S..HD | KC725M | .S..HD2 | KCSM40 | .S..HD2 | KCSM40 |
| H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?