successfully added to cart
View Cart
Top Notch™ねじ切りカートリッジ
Top Notch™ねじ切りカートリッジ
Top Notch™ねじ切りカートリッジ
Top Notch™ねじ切りカートリッジ

NE-CA

Top Notch™ねじ切りカートリッジ

Uses and application

  • I.D. Internal ThreadingI.D. Internal Threading
  • I.D. TurningI.D. Turning
  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • I.D. GroovingI.D. Grooving

Workpiece Materials

P
M
K
N
S
H
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (4)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (4)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (4)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (4)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (4)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (4)
  • M Stainless Steel (4)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (4)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (4)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (4)
  • K Cast Iron (4)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (4)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (4)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (4)
  • N Non-Ferrous Materials (4)
    • N1
      Wrought Aluminum
      (4)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (4)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (4)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (4)
    • N6
      Carbon, Graphite Composites, CFRP
      (4)
    • N7
      MMC's
      (4)
  • S High-Temp Alloys (4)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (4)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (4)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (4)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (4)
  • H Hardened Materials (4)
    • H1
      Hardened Materials 44-48 HRC
      (4)
    • H2
      Hardened Materials 48-55 HRC
      (4)
    • H3
      Hardened Materials 56-60 HRC
      (1)
    • H4
      Hardened Materials >60 HRC
      (1)
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (3)
  • Blind Hole Finishing Blind Hole Finishing (3)
  • CRT Boring CRT Boring (3)
  • CRT Profiling CRT Profiling (3)
  • Chamfer Milling Chamfer Milling (3)
  • Cut-Off Cut-Off (3)
  • Deep Grooving Deep Grooving (3)
  • Drilling Drilling (3)
  • Face Grooving Face Grooving (3)
  • Face Milling Face Milling (3)
  • Grooving Grooving (3)
  • ID Facing ID Facing (3)
  • ID Grooving ID Grooving (3)
  • Multiple Direction Cutting Multiple Direction Cutting (3)
  • Profiling Profiling (3)
  • Shoulder Milling Shoulder Milling (3)
  • TRN Boring TRN Boring (3)
  • Threading Threading (3)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (3)
  • Through Hole Finishing Through Hole Finishing (3)
Type of Thread
  • 60 (4)
  • ACME (1)
  • API (1)
  • API RD (1)
  • BSW (1)
  • BUTTRESS (4)
  • M (2)
  • NPT (1)
  • STUB ACME (1)
  • UN (4)
  • UNJ (1)
Cutting Condition
  • Heavily Interrupted Cut (4)
  • Lightly Interrupted Cut (4)
  • Smooth Cut (4)
  • Varying Depth of Cut (4)
Tool Cutting Edge Angle
  • 90.0 (4)
to
cornerConfiguration
Corner Radius
  • 0.026 (1)
  • 0.051 (1)
  • 0.066 (1)
  • 0.076 (4)
  • 0.08 (4)
  • 0.089 (4)
  • 0.09 (4)
  • 0.094 (1)
  • 0.1 (4)
  • 0.102 (4)
  • 0.116 (1)
  • 0.127 (1)
  • 0.131 (1)
  • 0.132 (1)
  • 0.133 (1)
  • 0.15 (1)
  • 0.155 (1)
  • 0.157 (1)
  • 0.165 (1)
  • 0.173 (1)
  • 0.178 (1)
  • 0.18 (1)
  • 0.185 (1)
  • 0.19 (4)
  • 0.191 (4)
  • 0.198 (1)
  • 0.2 (1)
  • 0.202 (2)
  • 0.224 (1)
  • 0.235 (1)
  • 0.244 (1)
  • 0.25 (1)
  • 0.251 (1)
  • 0.254 (1)
  • 0.255 (1)
  • 0.269 (1)
  • 0.282 (1)
  • 0.284 (1)
  • 0.3 (1)
  • 0.315 (1)
  • 0.318 (1)
  • 0.33 (1)
  • 0.34 (1)
  • 0.343 (2)
  • 0.356 (1)
  • 0.404 (1)
  • 0.406 (1)
  • 0.43 (1)
  • 0.445 (1)
  • 0.472 (1)
  • 0.49 (1)
  • 0.5 (3)
  • 0.508 (1)
  • 0.572 (1)
  • 0.575 (1)
  • 0.75 (3)
  • 0.787 (4)
  • 0.902 (1)
  • 1.0 (4)
  • 1.194 (4)
  • 1.25 (4)
  • 1.5 (4)
  • 1.585 (1)
  • 1.588 (4)
  • 1.75 (4)
  • 1.981 (1)
  • 2.0 (1)
  • 2.25 (1)
  • 2.388 (1)
to
Corner Radius
  • 0.002 (1)
  • 0.0026 (1)
  • 0.003 (4)
  • 0.0031 (4)
  • 0.0035 (4)
  • 0.0037 (1)
  • 0.004 (4)
  • 0.0046 (1)
  • 0.005 (1)
  • 0.0052 (1)
  • 0.0053 (1)
  • 0.0059 (1)
  • 0.006 (1)
  • 0.0062 (1)
  • 0.0065 (1)
  • 0.0068 (1)
  • 0.007 (1)
  • 0.0075 (4)
  • 0.0078 (1)
  • 0.0079 (1)
  • 0.008 (2)
  • 0.0088 (1)
  • 0.0093 (1)
  • 0.0096 (1)
  • 0.0099 (1)
  • 0.01 (1)
  • 0.0106 (1)
  • 0.0111 (1)
  • 0.0112 (1)
  • 0.0118 (1)
  • 0.0124 (1)
  • 0.0125 (1)
  • 0.013 (1)
  • 0.0135 (2)
  • 0.014 (1)
  • 0.0159 (1)
  • 0.016 (1)
  • 0.017 (1)
  • 0.0175 (1)
  • 0.0186 (1)
  • 0.0193 (1)
  • 0.0197 (3)
  • 0.02 (1)
  • 0.0225 (1)
  • 0.0295 (3)
  • 0.031 (4)
  • 0.0355 (1)
  • 0.0394 (4)
  • 0.047 (4)
  • 0.0492 (4)
  • 0.0591 (4)
  • 0.0625 (4)
  • 0.0689 (4)
  • 0.078 (1)
  • 0.0787 (1)
  • 0.0886 (1)
  • 0.094 (1)
to
application
Grade Of Cutting Tool
  • K2885 (4)
  • K313 (4)
  • K420 (4)
  • K4H (3)
  • K68 (4)
  • KB1345 (1)
  • KB1630 (1)
  • KB5625 (1)
  • KC250 (4)
  • KC5010 (4)
  • KC5025 (4)
  • KC5410 (4)
  • KC710 (4)
  • KC720 (4)
  • KC722 (4)
  • KC730 (4)
  • KC732 (1)
  • KC810 (4)
  • KC850 (4)
  • KC910 (3)
  • KC9110 (4)
  • KC9120 (1)
  • KC9320 (4)
  • KC935 (4)
  • KC950 (4)
  • KCK20 (3)
  • KCK20B (4)
  • KCP10B (4)
  • KCP25B (4)
  • KCU10 (4)
  • KCU25 (4)
  • KD050 (1)
  • KD081 (1)
  • KD100 (1)
  • KD120 (1)
  • KD1425 (1)
  • KT175 (4)
  • KT315 (4)
  • KU10T (4)
  • KU25T (4)
  • KU30T (4)
  • KY3000 (1)
Minimum Axial Groove Diameter
  • 1.9685 (2)
  • 2.7559 (1)
  • 3.937 (1)
to
Minimum Axial Groove Diameter
  • 50.0 (2)
  • 70.0 (1)
  • 100.0 (1)
to
Maximum Axial Groove Diameter
  • 9999.0 (4)
to
Maximum Axial Groove Diameter
  • 393.661 (4)
to
frontEnd
Clamp Style
  • N (3)
  • S (1)
Insert Shape
  • TN-TOP NOTCH (4)
Cutting Width
  • 0.5 (2)
  • 0.787 (2)
  • 0.8 (2)
  • 0.889 (2)
  • 0.991 (2)
  • 1.0 (3)
  • 1.041 (2)
  • 1.19 (2)
  • 1.194 (3)
  • 1.199 (1)
  • 1.2 (3)
  • 1.39 (2)
  • 1.397 (2)
  • 1.4 (2)
  • 1.473 (2)
  • 1.5 (3)
  • 1.56 (1)
  • 1.57 (2)
  • 1.575 (3)
  • 1.69 (2)
  • 1.7 (2)
  • 1.702 (2)
  • 1.75 (3)
  • 1.829 (1)
  • 1.94 (2)
  • 1.95 (2)
  • 1.956 (2)
  • 1.981 (1)
  • 2.0 (3)
  • 2.007 (2)
  • 2.2 (3)
  • 2.235 (3)
  • 2.24 (3)
  • 2.25 (2)
  • 2.388 (3)
  • 2.464 (1)
  • 2.5 (3)
  • 2.667 (1)
  • 2.74 (2)
  • 2.743 (3)
  • 2.75 (3)
  • 2.794 (1)
  • 2.997 (3)
  • 3.0 (3)
  • 3.099 (1)
  • 3.17 (1)
  • 3.175 (3)
  • 3.18 (1)
  • 3.2 (3)
  • 3.245 (2)
  • 3.25 (1)
  • 3.251 (3)
  • 3.27 (2)
  • 3.32 (1)
  • 3.329 (1)
  • 3.5 (3)
  • 3.607 (1)
  • 3.73 (1)
  • 3.81 (2)
  • 3.84 (2)
  • 3.96 (1)
  • 3.962 (1)
  • 3.974 (1)
  • 3.988 (1)
  • 4.0 (1)
  • 4.242 (1)
  • 4.25 (1)
  • 4.3 (1)
  • 4.5 (1)
  • 4.521 (1)
  • 4.699 (1)
  • 4.775 (1)
  • 4.8 (1)
  • 4.801 (1)
  • 4.81 (1)
  • 4.88 (1)
  • 4.95 (1)
to
Cutting Width
  • 0.0197 (2)
  • 0.031 (2)
  • 0.0315 (2)
  • 0.035 (2)
  • 0.039 (2)
  • 0.0394 (3)
  • 0.041 (2)
  • 0.047 (3)
  • 0.0472 (3)
  • 0.055 (2)
  • 0.0551 (2)
  • 0.058 (2)
  • 0.0591 (3)
  • 0.062 (3)
  • 0.0669 (2)
  • 0.067 (2)
  • 0.0689 (3)
  • 0.072 (1)
  • 0.076 (2)
  • 0.0768 (2)
  • 0.077 (2)
  • 0.078 (1)
  • 0.0787 (3)
  • 0.079 (3)
  • 0.0866 (3)
  • 0.088 (3)
  • 0.0886 (2)
  • 0.094 (3)
  • 0.097 (1)
  • 0.0984 (3)
  • 0.105 (1)
  • 0.108 (3)
  • 0.1083 (3)
  • 0.11 (1)
  • 0.118 (3)
  • 0.1181 (3)
  • 0.122 (1)
  • 0.125 (3)
  • 0.126 (3)
  • 0.1278 (2)
  • 0.128 (3)
  • 0.129 (2)
  • 0.131 (1)
  • 0.1378 (3)
  • 0.142 (1)
  • 0.147 (1)
  • 0.15 (2)
  • 0.151 (2)
  • 0.156 (1)
  • 0.157 (1)
  • 0.1574 (1)
  • 0.1575 (1)
  • 0.167 (1)
  • 0.1673 (1)
  • 0.169 (1)
  • 0.1771 (1)
  • 0.1772 (1)
  • 0.178 (1)
  • 0.185 (1)
  • 0.188 (1)
  • 0.189 (1)
  • 0.192 (1)
  • 0.195 (1)
to
Cartridge Size
  • 20 - mm of Cutting Height (1)
insertGeometry
Cutting Tool Material
  • B H (1)
  • B L (1)
  • C N (1)
  • D P (1)
  • H T (4)
  • H W (4)
other
Platform
  • Top Notch (3)
Tool Unit
  • I (3)
  • M (1)
Over All Length [L]
  • 55.0 (1)
  • 55.67 (1)
to
Over All Length [L]
  • 2.1654 (1)
  • 2.1917 (1)
to
Insert Hand
  • L (2)
  • R (2)
secondaryCategoriesKMT
Cutting Condition Material
  • H-All (4)
  • K-All (4)
  • M-All (4)
  • N-All (4)
  • P-All (4)
  • S-All (4)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 4 of 4 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length Gage Insert
1098624 NEL12CA2 NEL12CA2 50.0000 1.968 20.0000 .7874 55.0000 2.165 N.2R
    1098626 NEL25CA3 NEL25CA3 100.0000 3.937 32.0000 1.259 100.0000 3.937 N.3R
      1098380 NER12CA2 NER12CA2 50.0000 1.968 20.0000 .7874 55.6700 2.191 N.2L
        1098376 NER20CA2A NER20CA2A 70.0000 2.755 25.0000 .9843 70.0000 2.755 N.2L
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
          You are about to create a duplicate . Do you want to proceed?
          You are about to delete Do you want to proceed?
          What would you like to rename your to?
          Please enter a valid name
          Please enter a name for the duplicate
          Please enter a valid name
          You are about to add to your My Solutions page. Do you want to proceed?
          Please enter a valid name
          Send a copy of

          Please enter a valid Email
          Please enter a valid name

          We have found the following CAD Drawings

          Select the files you are looking for and download them all at once

          You should be logged to see your dashboard information
          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
          item(s) successfully added to the cart
          View Cart