Le damos la bienvenida
Confirme sus preferencias
Actualizar preferencias

Sugerencias de productos

Product Family suggestions

Kennametal a su servicio

Atención al cliente

Encuentre los datos de contacto de los centros de atención al cliente de todo el mundo

Pedido rápido
Artículo(s) añadido correctamente al carrito
Ver carrito
¡Frese más por menos con nuestras ofertas por tiempo limitado! Compre ahora

Serie K/B343_ HPG • Brocas SE_ HPG con refrigeración

Seleccionar filtros
Filtros
Filtros
Ver filtros en
Metric
Inch
keyFilters
Material de la pieza de trabajo
Material de la pieza de trabajo
  • P Acero (117)
    • P0
      Aceros con bajo contenido de carbono, virutas largas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (117)
    • P1
      Aceros con bajo contenido de carbono, virutas cortas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (117)
    • P2
      Aceros al carbono medios y altos C < 0,25 %; <220 HB; <25 HRC; >530 N/mm^2 UTS (117)
    • P3
      Aceros aleados y aceros para herramientas C > 0,25 %; <330 HB; <35 HRC; entre 600 y 850 N/mm^2 UTS (117)
    • P4
      Aceros aleados y aceros para herramientas C > 0,25 %; entre 350 y 420 HB; entre 35 y 43 HRC; entre 850 y 1400 N/mm^2 UTS (117)
    • P5
      Aceros ferríticos, martensíticos e inoxidables PH <330 HB; <35 HRC; entre 600 y 900 N/mm^2 UTS (117)
    • P6
      Aceros ferríticos, martensíticos e inoxidables PH de alta resistencia Entre 350 y 450 HB; entre 35 y 43 HRC; entre 900 y 2400 N/mm^2 UTS (117)
  • K Fundición (117)
    • K1
      Fundición gris Entre 120 y 290 HB; <32 HRC; entre 125 y 500 N/mm^2 UTS (117)
    • K2
      Fundiciones dúctiles y CGI de baja y media resistencia Entre 130 y 260 HB; <28 HRC; <600 N/mm^2 UTS (117)
    • K3
      Fundición austenítica y dúctil de alta resistencia Entre 180 y 350 HB; <43 HRC; >600 N/mm^2 UTS (117)
Aplicaciones
Aplicaciones
  • Counterboring Counterboring (37)
  • Countersinking Countersinking (37)
  • Drilling Drilling (117)
  • Inclined Exit Drilling Inclined Exit Drilling (37)
  • Stacked Plates Drilling Stacked Plates Drilling (80)
Diámetro del corte
Diámetro del corte
  • 0.134 in (1)
  • 0.138 in (1)
  • 0.143 in (1)
  • 0.15 in (2)
  • 0.154 in (1)
  • 0.156 in (1)
  • 0.157 in (1)
  • 0.161 in (1)
  • 0.165 in (1)
  • 0.169 in (1)
  • 0.177 in (1)
  • 0.181 in (1)
  • 0.182 in (1)
  • 0.188 in (2)
  • 0.197 in (1)
  • 0.201 in (1)
  • 0.206 in (1)
  • 0.209 in (1)
  • 0.213 in (1)
  • 0.217 in (1)
  • 0.219 in (2)
  • 0.221 in (1)
  • 0.228 in (1)
  • 0.237 in (1)
  • 0.24 in (1)
  • 0.244 in (1)
  • 0.25 in (1)
  • 0.252 in (1)
  • 0.256 in (1)
  • 0.257 in (1)
  • 0.26 in (1)
  • 0.264 in (2)
  • 0.266 in (1)
  • 0.268 in (2)
  • 0.272 in (2)
  • 0.276 in (1)
  • 0.288 in (1)
  • 0.291 in (1)
  • 0.295 in (1)
  • 0.297 in (1)
  • 0.307 in (1)
  • 0.311 in (1)
  • 0.313 in (2)
  • 0.315 in (1)
  • 0.319 in (1)
  • 0.323 in (2)
  • 0.327 in (1)
  • 0.328 in (1)
  • 0.331 in (1)
  • 0.332 in (2)
  • 0.335 in (1)
  • 0.339 in (2)
  • 0.343 in (2)
  • 0.345 in (1)
  • 0.347 in (1)
  • 0.354 in (1)
  • 0.358 in (1)
  • 0.368 in (1)
  • 0.37 in (1)
  • 0.374 in (1)
  • 0.386 in (1)
  • 0.391 in (1)
  • 0.394 in (1)
  • 0.402 in (1)
  • 0.406 in (1)
  • 0.408 in (1)
  • 0.41 in (2)
  • 0.414 in (1)
  • 0.417 in (1)
  • 0.421 in (1)
  • 0.425 in (1)
  • 0.433 in (1)
  • 0.437 in (2)
  • 0.438 in (1)
  • 0.441 in (1)
  • 0.453 in (2)
  • 0.461 in (1)
  • 0.465 in (1)
  • 0.47 in (1)
  • 0.473 in (1)
  • 0.48 in (2)
  • 0.492 in (2)
  • 0.504 in (2)
  • 0.512 in (1)
  • 0.52 in (1)
  • 0.531 in (1)
  • 0.551 in (1)
  • 0.559 in (1)
  • 0.564 in (1)
  • 0.591 in (1)
  • 0.61 in (2)
  • 0.625 in (2)
  • 0.63 in (1)
  • 0.65 in (1)
  • 0.669 in (1)
  • 0.69 in (1)
  • 0.709 in (2)
Diámetro del corte Min a Diámetro del corte Max
Diámetro del corte
Diámetro del corte
  • 3.401 mm (1)
  • 3.5 mm (1)
  • 3.6 mm (1)
  • 3.801 mm (2)
  • 3.901 mm (1)
  • 3.975 mm (1)
  • 4.0 mm (1)
  • 4.101 mm (1)
  • 4.2 mm (1)
  • 4.3 mm (1)
  • 4.5 mm (1)
  • 4.601 mm (1)
  • 4.625 mm (1)
  • 4.775 mm (2)
  • 5.0 mm (1)
  • 5.101 mm (1)
  • 5.2 mm (1)
  • 5.301 mm (1)
  • 5.4 mm (1)
  • 5.5 mm (1)
  • 5.551 mm (2)
  • 5.601 mm (1)
  • 5.801 mm (1)
  • 6.0 mm (1)
  • 6.101 mm (1)
  • 6.2 mm (1)
  • 6.351 mm (1)
  • 6.4 mm (1)
  • 6.5 mm (1)
  • 6.525 mm (1)
  • 6.601 mm (1)
  • 6.7 mm (2)
  • 6.75 mm (1)
  • 6.801 mm (2)
  • 6.9 mm (2)
  • 7.0 mm (1)
  • 7.301 mm (1)
  • 7.4 mm (1)
  • 7.5 mm (1)
  • 7.551 mm (1)
  • 7.801 mm (1)
  • 7.9 mm (1)
  • 7.95 mm (2)
  • 8.0 mm (1)
  • 8.1 mm (1)
  • 8.201 mm (2)
  • 8.3 mm (1)
  • 8.326 mm (1)
  • 8.4 mm (1)
  • 8.425 mm (2)
  • 8.5 mm (1)
  • 8.6 mm (2)
  • 8.701 mm (2)
  • 8.725 mm (1)
  • 8.8 mm (1)
  • 9.0 mm (1)
  • 9.1 mm (1)
  • 9.35 mm (1)
  • 9.4 mm (1)
  • 9.5 mm (1)
  • 9.8 mm (1)
  • 9.925 mm (1)
  • 10.0 mm (1)
  • 10.201 mm (1)
  • 10.3 mm (1)
  • 10.326 mm (1)
  • 10.4 mm (2)
  • 10.5 mm (1)
  • 10.601 mm (1)
  • 10.701 mm (1)
  • 10.8 mm (1)
  • 11.0 mm (1)
  • 11.101 mm (2)
  • 11.125 mm (1)
  • 11.201 mm (1)
  • 11.5 mm (2)
  • 11.701 mm (1)
  • 11.8 mm (1)
  • 11.9 mm (1)
  • 12.0 mm (1)
  • 12.201 mm (2)
  • 12.5 mm (2)
  • 12.8 mm (2)
  • 13.0 mm (1)
  • 13.201 mm (1)
  • 13.5 mm (1)
  • 14.0 mm (1)
  • 14.201 mm (1)
  • 14.3 mm (1)
  • 15.0 mm (1)
  • 15.5 mm (2)
  • 15.875 mm (2)
  • 16.0 mm (1)
  • 16.5 mm (1)
  • 17.0 mm (1)
  • 17.5 mm (1)
  • 18.0 mm (2)
Diámetro del corte Min a Diámetro del corte Max
Profundidad de taladrado máxima [L4]
Profundidad de taladrado máxima [L4]
  • 10.0 mm (1)
  • 10.601 mm (1)
  • 11.201 mm (1)
  • 12.3 mm (2)
  • 12.9 mm (1)
  • 13.3 mm (1)
  • 13.4 mm (1)
  • 13.701 mm (1)
  • 14.201 mm (1)
  • 14.701 mm (1)
  • 15.601 mm (1)
  • 15.8 mm (1)
  • 15.9 mm (1)
  • 16.6 mm (2)
  • 17.6 mm (1)
  • 17.8 mm (1)
  • 18.2 mm (1)
  • 18.6 mm (1)
  • 19.0 mm (1)
  • 19.3 mm (1)
  • 19.401 mm (2)
  • 19.5 mm (1)
  • 20.3 mm (1)
  • 21.0 mm (1)
  • 21.1 mm (1)
  • 21.5 mm (1)
  • 22.0 mm (1)
  • 22.201 mm (1)
  • 22.5 mm (1)
  • 22.6 mm (1)
  • 22.901 mm (1)
  • 23.201 mm (2)
  • 23.401 mm (1)
  • 23.5 mm (2)
  • 23.901 mm (2)
  • 24.201 mm (1)
  • 24.6 mm (1)
  • 24.901 mm (1)
  • 25.3 mm (1)
  • 25.401 mm (1)
  • 26.201 mm (1)
  • 26.5 mm (1)
  • 26.6 mm (3)
  • 26.8 mm (3)
  • 27.1 mm (1)
  • 27.201 mm (1)
  • 27.401 mm (1)
  • 27.5 mm (2)
  • 27.701 mm (1)
  • 28.0 mm (2)
  • 28.3 mm (2)
  • 28.401 mm (1)
  • 28.5 mm (1)
  • 28.8 mm (1)
  • 29.1 mm (1)
  • 29.5 mm (1)
  • 29.6 mm (1)
  • 29.901 mm (1)
  • 30.701 mm (1)
  • 31.0 mm (1)
  • 31.201 mm (2)
  • 31.401 mm (1)
  • 31.5 mm (1)
  • 31.701 mm (2)
  • 31.901 mm (1)
  • 32.2 mm (1)
  • 32.4 mm (1)
  • 32.7 mm (1)
  • 32.9 mm (3)
  • 33.1 mm (2)
  • 33.801 mm (2)
  • 34.301 mm (1)
  • 34.5 mm (1)
  • 34.801 mm (1)
  • 34.9 mm (2)
  • 35.0 mm (1)
  • 35.551 mm (1)
  • 35.6 mm (1)
  • 36.301 mm (2)
  • 36.7 mm (1)
  • 36.9 mm (1)
  • 37.6 mm (1)
  • 38.5 mm (1)
  • 38.6 mm (1)
  • 38.7 mm (1)
  • 40.2 mm (1)
  • 40.7 mm (2)
  • 41.401 mm (1)
  • 41.5 mm (1)
  • 41.7 mm (1)
  • 42.2 mm (1)
  • 43.1 mm (1)
  • 43.6 mm (1)
  • 44.5 mm (2)
Profundidad de taladrado máxima [L4] Min a Profundidad de taladrado máxima [L4] Max
Profundidad de taladrado máxima [L4]
Profundidad de taladrado máxima [L4]
  • 0.394 in (1)
  • 0.417 in (1)
  • 0.441 in (1)
  • 0.484 in (2)
  • 0.508 in (1)
  • 0.524 in (1)
  • 0.528 in (1)
  • 0.539 in (1)
  • 0.559 in (1)
  • 0.579 in (1)
  • 0.614 in (1)
  • 0.622 in (1)
  • 0.626 in (1)
  • 0.654 in (2)
  • 0.694 in (1)
  • 0.702 in (1)
  • 0.717 in (1)
  • 0.732 in (1)
  • 0.748 in (1)
  • 0.76 in (1)
  • 0.764 in (2)
  • 0.768 in (1)
  • 0.799 in (1)
  • 0.828 in (1)
  • 0.832 in (1)
  • 0.846 in (1)
  • 0.866 in (1)
  • 0.874 in (1)
  • 0.886 in (1)
  • 0.89 in (1)
  • 0.902 in (1)
  • 0.913 in (2)
  • 0.921 in (1)
  • 0.925 in (2)
  • 0.942 in (2)
  • 0.954 in (1)
  • 0.969 in (1)
  • 0.98 in (1)
  • 0.996 in (1)
  • 1.0 in (1)
  • 1.032 in (1)
  • 1.043 in (1)
  • 1.047 in (3)
  • 1.055 in (3)
  • 1.067 in (1)
  • 1.071 in (1)
  • 1.079 in (1)
  • 1.083 in (2)
  • 1.091 in (1)
  • 1.102 in (2)
  • 1.114 in (2)
  • 1.118 in (1)
  • 1.122 in (1)
  • 1.135 in (1)
  • 1.147 in (1)
  • 1.161 in (1)
  • 1.165 in (1)
  • 1.177 in (1)
  • 1.209 in (1)
  • 1.22 in (1)
  • 1.228 in (2)
  • 1.236 in (1)
  • 1.24 in (1)
  • 1.248 in (2)
  • 1.256 in (1)
  • 1.268 in (1)
  • 1.276 in (1)
  • 1.287 in (1)
  • 1.295 in (3)
  • 1.303 in (2)
  • 1.331 in (2)
  • 1.35 in (1)
  • 1.358 in (1)
  • 1.37 in (1)
  • 1.374 in (2)
  • 1.379 in (1)
  • 1.401 in (1)
  • 1.403 in (1)
  • 1.429 in (2)
  • 1.445 in (1)
  • 1.453 in (1)
  • 1.48 in (1)
  • 1.516 in (1)
  • 1.52 in (1)
  • 1.524 in (1)
  • 1.583 in (1)
  • 1.602 in (2)
  • 1.631 in (1)
  • 1.635 in (1)
  • 1.643 in (1)
  • 1.661 in (1)
  • 1.697 in (1)
  • 1.717 in (1)
  • 1.752 in (2)
Profundidad de taladrado máxima [L4] Min a Profundidad de taladrado máxima [L4] Max
Alcance
Alcance
  • 0.717 in (1)
  • 0.744 in (1)
  • 0.772 in (1)
  • 0.824 in (2)
  • 0.85 in (1)
  • 0.87 in (1)
  • 0.878 in (1)
  • 0.894 in (1)
  • 0.917 in (1)
  • 0.942 in (1)
  • 0.984 in (1)
  • 1.004 in (1)
  • 1.008 in (1)
  • 1.043 in (2)
  • 1.091 in (1)
  • 1.102 in (1)
  • 1.122 in (1)
  • 1.143 in (1)
  • 1.161 in (1)
  • 1.181 in (1)
  • 1.189 in (1)
  • 1.193 in (1)
  • 1.201 in (1)
  • 1.24 in (1)
  • 1.276 in (1)
  • 1.283 in (1)
  • 1.303 in (1)
  • 1.327 in (1)
  • 1.339 in (1)
  • 1.354 in (1)
  • 1.358 in (1)
  • 1.374 in (1)
  • 1.391 in (2)
  • 1.399 in (1)
  • 1.407 in (2)
  • 1.425 in (2)
  • 1.437 in (1)
  • 1.476 in (1)
  • 1.492 in (1)
  • 1.512 in (1)
  • 1.516 in (1)
  • 1.559 in (1)
  • 1.575 in (1)
  • 1.579 in (2)
  • 1.591 in (1)
  • 1.598 in (1)
  • 1.606 in (2)
  • 1.622 in (1)
  • 1.631 in (1)
  • 1.639 in (1)
  • 1.647 in (2)
  • 1.655 in (1)
  • 1.669 in (2)
  • 1.685 in (2)
  • 1.689 in (1)
  • 1.697 in (1)
  • 1.728 in (1)
  • 1.732 in (1)
  • 1.768 in (1)
  • 1.776 in (1)
  • 1.792 in (1)
  • 1.831 in (1)
  • 1.846 in (1)
  • 1.858 in (1)
  • 1.879 in (1)
  • 1.891 in (1)
  • 1.895 in (1)
  • 1.907 in (2)
  • 1.913 in (1)
  • 1.929 in (1)
  • 1.941 in (1)
  • 1.957 in (1)
  • 1.98 in (1)
  • 1.988 in (3)
  • 2.0 in (1)
  • 2.035 in (2)
  • 2.063 in (1)
  • 2.075 in (1)
  • 2.091 in (1)
  • 2.098 in (1)
  • 2.114 in (2)
  • 2.15 in (1)
  • 2.154 in (1)
  • 2.189 in (2)
  • 2.213 in (1)
  • 2.232 in (1)
  • 2.269 in (1)
  • 2.323 in (1)
  • 2.339 in (1)
  • 2.35 in (1)
  • 2.43 in (1)
  • 2.48 in (2)
  • 2.52 in (1)
  • 2.524 in (1)
  • 2.535 in (1)
  • 2.583 in (1)
  • 2.634 in (1)
  • 2.685 in (1)
  • 2.736 in (2)
Alcance Min a Alcance Max
Alcance
Alcance
  • 18.2 mm (1)
  • 18.901 mm (1)
  • 19.6 mm (1)
  • 20.901 mm (2)
  • 21.6 mm (1)
  • 22.1 mm (1)
  • 22.3 mm (1)
  • 22.701 mm (1)
  • 23.3 mm (1)
  • 23.901 mm (1)
  • 25.0 mm (1)
  • 25.5 mm (1)
  • 25.6 mm (1)
  • 26.5 mm (2)
  • 27.701 mm (1)
  • 28.0 mm (1)
  • 28.5 mm (1)
  • 29.0 mm (1)
  • 29.5 mm (1)
  • 30.0 mm (1)
  • 30.201 mm (1)
  • 30.3 mm (1)
  • 30.5 mm (1)
  • 31.5 mm (1)
  • 32.4 mm (1)
  • 32.6 mm (1)
  • 33.1 mm (1)
  • 33.7 mm (1)
  • 34.0 mm (1)
  • 34.4 mm (1)
  • 34.5 mm (1)
  • 34.9 mm (1)
  • 35.301 mm (2)
  • 35.5 mm (1)
  • 35.7 mm (2)
  • 36.2 mm (2)
  • 36.5 mm (1)
  • 37.5 mm (1)
  • 37.9 mm (1)
  • 38.401 mm (1)
  • 38.5 mm (1)
  • 39.6 mm (1)
  • 40.0 mm (1)
  • 40.1 mm (2)
  • 40.401 mm (1)
  • 40.6 mm (1)
  • 40.801 mm (2)
  • 41.2 mm (1)
  • 41.401 mm (1)
  • 41.6 mm (1)
  • 41.801 mm (2)
  • 42.0 mm (1)
  • 42.401 mm (2)
  • 42.801 mm (2)
  • 42.901 mm (1)
  • 43.1 mm (1)
  • 43.901 mm (1)
  • 44.0 mm (1)
  • 44.901 mm (1)
  • 45.1 mm (1)
  • 45.5 mm (1)
  • 46.5 mm (1)
  • 46.901 mm (1)
  • 47.2 mm (1)
  • 47.7 mm (1)
  • 48.0 mm (1)
  • 48.1 mm (1)
  • 48.401 mm (2)
  • 48.6 mm (1)
  • 49.0 mm (1)
  • 49.301 mm (1)
  • 49.7 mm (1)
  • 50.301 mm (1)
  • 50.5 mm (3)
  • 50.801 mm (1)
  • 51.7 mm (2)
  • 52.401 mm (1)
  • 52.7 mm (1)
  • 53.1 mm (1)
  • 53.301 mm (1)
  • 53.7 mm (2)
  • 54.6 mm (1)
  • 54.7 mm (1)
  • 55.6 mm (2)
  • 56.2 mm (1)
  • 56.7 mm (1)
  • 57.6 mm (1)
  • 59.0 mm (1)
  • 59.401 mm (1)
  • 59.7 mm (1)
  • 61.7 mm (1)
  • 63.0 mm (2)
  • 64.0 mm (1)
  • 64.101 mm (1)
  • 64.4 mm (1)
  • 65.601 mm (1)
  • 66.9 mm (1)
  • 68.2 mm (1)
  • 69.5 mm (2)
Alcance Min a Alcance Max
Longitud total [L]
Longitud total [L]
  • 2.165 in (8)
  • 2.441 in (9)
  • 2.598 in (10)
  • 2.914 in (15)
  • 3.11 in (9)
  • 3.307 in (16)
  • 3.504 in (7)
  • 3.74 in (10)
  • 4.016 in (17)
  • 4.213 in (3)
  • 4.37 in (3)
  • 4.529 in (7)
  • 4.606 in (3)
Longitud total [L] Min a Longitud total [L] Max
Longitud total [L]
Longitud total [L]
  • 55.0 mm (8)
  • 62.0 mm (9)
  • 66.0 mm (10)
  • 74.0 mm (15)
  • 79.0 mm (9)
  • 84.0 mm (16)
  • 89.0 mm (7)
  • 95.0 mm (10)
  • 102.0 mm (17)
  • 107.0 mm (3)
  • 111.0 mm (3)
  • 115.0 mm (7)
  • 117.0 mm (3)
Longitud total [L] Min a Longitud total [L] Max
application
Recubrimiento
Recubrimiento
  • TiN (37)
Calidad de herramienta de corte
Calidad de herramienta de corte
  • KC7315 (37)
  • KCU15 (80)
Tipo de broca
Tipo de broca
  • 81-01 (37)
  • 86-09 (80)
backEnd
Diámetro de extremo posterior
Diámetro de extremo posterior
  • 4.0 mm (8)
  • 5.0 mm (9)
  • 6.0 mm (10)
  • 7.0 mm (15)
  • 8.0 mm (9)
  • 9.0 mm (16)
  • 10.0 mm (7)
  • 11.0 mm (10)
  • 12.0 mm (10)
  • 13.0 mm (7)
  • 14.0 mm (3)
  • 15.0 mm (3)
  • 16.0 mm (5)
  • 17.0 mm (2)
  • 18.0 mm (3)
Diámetro de extremo posterior Min a Diámetro de extremo posterior Max
Diámetro de extremo posterior
Diámetro de extremo posterior
  • 0.157 in (8)
  • 0.197 in (9)
  • 0.237 in (10)
  • 0.276 in (15)
  • 0.315 in (9)
  • 0.354 in (16)
  • 0.394 in (7)
  • 0.433 in (10)
  • 0.473 in (10)
  • 0.512 in (7)
  • 0.551 in (3)
  • 0.591 in (3)
  • 0.63 in (5)
  • 0.669 in (2)
  • 0.709 in (3)
Diámetro de extremo posterior Min a Diámetro de extremo posterior Max
No filters matching ""

B343_HPG S-Shank • High-Performance BF Solid Carbide Drills

(117) B343_HPG S-Shank • High-Performance BF Solid Carbide Drills
Está a punto de añadir a su página Mis soluciones. ¿Desea continuar?
product-image
Please adjust the following properties from

ISO catálogo

ANSI catálogo

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Debe iniciar sesión para ver la información de su panel de control
Session expired due to inactivity, please login again
El/los producto/s () que estaba intentando añadir al carrito no está/están disponibles Contacto del servicio de atención al cliente.
artículo(s) añadido(s) correctamente al carrito
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO catálogo Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Gracias por haberse registrado correctamente. Usted dispone ahora de acceso inmediato para conectarse y utilizar la página web.

You are about to leave the Solution building process.

Are you sure you want to leave?