successfully added to cart
View Cart

Notifications

Mark all as read

Torneado

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (11208)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11182)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11182)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (11182)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (11183)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (11183)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (11207)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (11207)
  • M Stainless Steel (9311)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (9311)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (9311)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (9311)
  • K Cast Iron (9560)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (9520)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (9477)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (9153)
  • N Non-Ferrous Materials (6989)
    • N1
      Wrought Aluminum
      (6656)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (6524)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2413)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (6975)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6596)
    • N6
      Carbon, Graphite Composites, CFRP
      (6101)
    • N7
      MMC's
      (3468)
  • S High-Temp Alloys (9614)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (9401)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (9596)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (9414)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8682)
  • H Hardened Materials (5644)
    • H1
      Hardened Materials 44-48 HRC
      (5644)
    • H2
      Hardened Materials 48-55 HRC
      (5344)
    • H3
      Hardened Materials 56-60 HRC
      (3688)
    • H4
      Hardened Materials >60 HRC
      (2839)
Select First Choice
  • BR (1)
  • CN (1357)
  • DE (1429)
  • GB (858)
  • IN (477)
  • SG (4)
  • US (1592)
Applications
Applications
  • Back Boring Back Boring (230)
  • Boring Boring (1467)
  • CRT Profiling CRT Profiling (81)
  • Chamfer Turning Chamfer Turning (175)
  • Cut-Off Cut-Off (1174)
  • Deep Grooving Deep Grooving (90)
  • Drilling Drilling (1)
  • Face Grooving Face Grooving (3186)
  • Facing Facing (1843)
  • Grooving Grooving (3502)
  • ID Facing ID Facing (491)
  • ID Grooving ID Grooving (2405)
  • ID Thread Turning ID Thread Turning (324)
  • Multiple Direction Cutting Multiple Direction Cutting (3074)
  • OD Thread Turning OD Thread Turning (129)
  • Plunge Turning Plunge Turning (2349)
  • Profiling Profiling (2419)
  • TRN Boring TRN Boring (1421)
  • Threading Threading (131)
  • Turning Turning (3615)
Cutting Length
Cutting Length
  • 26.0 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 1.024 in (1)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (204)
  • ACME (139)
  • API (127)
  • API BUTTRESS (2)
  • API RD (99)
  • BSPT (4)
  • BSW (92)
  • BUTTRESS (192)
  • M (128)
  • NPT (90)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (92)
  • TR DIN 103 (6)
  • UN (196)
  • UNJ (90)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (7401)
  • Interrupted (1582)
  • Lightly Interrupted Cut (8469)
  • Smooth Cut (11028)
  • Varying Depth of Cut (8789)
Connection Style
Connection Style
  • Bolt-On Head (214)
  • Boring Bar Shank (1078)
  • Cutoff Support Blade A1-A3 (80)
  • KM (496)
  • PSC (8)
  • Toolholder (2274)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (9182)
  • 1.0 (3101)
  • 2.0 (2463)
  • 3.0 (620)
  • 4.0 (1827)
  • 6.0 (391)
  • 8.0 (1084)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (27)
  • 0.002 in (16)
  • 0.003 in (5)
  • 0.004 in (233)
  • 0.005 in (17)
  • 0.006 in (25)
  • 0.007 in (85)
  • 0.008 in (1376)
  • 0.01 in (28)
  • 0.012 in (51)
  • 0.014 in (85)
  • 0.015 in (25)
  • 0.016 in (1737)
  • 0.02 in (71)
  • 0.023 in (200)
  • 0.024 in (1)
  • 0.03 in (158)
  • 0.031 in (2588)
  • 0.032 in (2)
  • 0.038 in (433)
  • 0.039 in (26)
  • 0.041 in (11)
  • 0.046 in (2)
  • 0.047 in (1166)
  • 0.048 in (2)
  • 0.049 in (1)
  • 0.05 in (102)
  • 0.051 in (129)
  • 0.057 in (43)
  • 0.06 in (27)
  • 0.061 in (9)
  • 0.062 in (14)
  • 0.063 in (468)
  • 0.065 in (7)
  • 0.066 in (86)
  • 0.069 in (1)
  • 0.07 in (4)
  • 0.076 in (201)
  • 0.078 in (15)
  • 0.079 in (15)
  • 0.08 in (165)
  • 0.081 in (13)
  • 0.089 in (68)
  • 0.09 in (68)
  • 0.094 in (250)
  • 0.096 in (8)
  • 0.097 in (47)
  • 0.098 in (15)
  • 0.099 in (8)
  • 0.1 in (1907)
  • 0.102 in (911)
  • 0.109 in (1)
  • 0.116 in (43)
  • 0.117 in (43)
  • 0.119 in (20)
  • 0.12 in (16)
  • 0.125 in (83)
  • 0.126 in (6)
  • 0.127 in (86)
  • 0.128 in (5)
  • 0.13 in (60)
  • 0.131 in (86)
  • 0.132 in (86)
  • 0.133 in (86)
  • 0.15 in (117)
  • 0.152 in (90)
  • 0.156 in (9)
  • 0.157 in (131)
  • 0.158 in (12)
  • 0.159 in (9)
  • 0.16 in (42)
  • 0.165 in (124)
  • 0.173 in (86)
  • 0.177 in (20)
  • 0.178 in (168)
  • 0.18 in (102)
  • 0.185 in (36)
  • 0.188 in (70)
  • 0.19 in (192)
  • 0.191 in (197)
  • 0.197 in (25)
  • 0.198 in (90)
  • 0.2 in (2936)
  • 0.202 in (122)
  • 0.203 in (1470)
  • 0.21 in (4)
  • 0.224 in (86)
  • 0.235 in (86)
  • 0.237 in (35)
  • 0.244 in (43)
  • 0.25 in (241)
  • 0.251 in (86)
  • 0.254 in (160)
  • 0.269 in (86)
  • 0.282 in (86)
  • 0.284 in (86)
  • 0.3 in (434)
  • 0.305 in (2)
  • 0.311 in (2)
  • 0.313 in (8)
  • 0.315 in (123)
  • 0.318 in (127)
  • 0.33 in (86)
  • 0.34 in (246)
  • 0.343 in (38)
  • 0.356 in (86)
  • 0.375 in (23)
  • 0.38 in (102)
  • 0.381 in (82)
  • 0.394 in (50)
  • 0.396 in (3)
  • 0.397 in (2216)
  • 0.4 in (3747)
  • 0.404 in (86)
  • 0.406 in (206)
  • 0.43 in (86)
  • 0.432 in (2)
  • 0.445 in (124)
  • 0.472 in (43)
  • 0.49 in (86)
  • 0.492 in (12)
  • 0.5 in (172)
  • 0.508 in (86)
  • 0.52 in (1)
  • 0.565 in (20)
  • 0.57 in (43)
  • 0.572 in (127)
  • 0.575 in (81)
  • 0.6 in (121)
  • 0.63 in (8)
  • 0.65 in (1)
  • 0.7 in (4)
  • 0.75 in (68)
  • 0.787 in (174)
  • 0.79 in (332)
  • 0.791 in (47)
  • 0.792 in (519)
  • 0.794 in (2273)
  • 0.795 in (28)
  • 0.8 in (3722)
  • 0.826 in (12)
  • 0.84 in (52)
  • 0.902 in (124)
  • 0.93 in (2)
  • 0.99 in (1)
  • 1.0 in (401)
  • 1.06 in (161)
  • 1.18 in (28)
  • 1.188 in (179)
  • 1.19 in (535)
  • 1.191 in (1762)
  • 1.194 in (161)
  • 1.195 in (43)
  • 1.2 in (2605)
  • 1.21 in (11)
  • 1.22 in (16)
  • 1.25 in (154)
  • 1.5 in (454)
  • 1.525 in (64)
  • 1.56 in (225)
  • 1.585 in (86)
  • 1.587 in (359)
  • 1.588 in (1479)
  • 1.59 in (309)
  • 1.6 in (1892)
  • 1.65 in (225)
  • 1.75 in (154)
  • 1.98 in (43)
  • 1.981 in (86)
  • 1.984 in (7)
  • 2.0 in (365)
  • 2.025 in (52)
  • 2.06 in (180)
  • 2.25 in (124)
  • 2.37 in (180)
  • 2.375 in (13)
  • 2.38 in (372)
  • 2.381 in (217)
  • 2.388 in (124)
  • 2.39 in (18)
  • 2.4 in (793)
  • 2.44 in (180)
  • 2.5 in (242)
  • 2.525 in (41)
  • 2.56 in (162)
  • 3.0 in (168)
  • 3.025 in (38)
  • 3.06 in (128)
  • 3.17 in (128)
  • 3.175 in (112)
  • 3.18 in (140)
  • 3.2 in (333)
  • 3.24 in (128)
  • 3.96 in (28)
  • 3.969 in (16)
  • 3.97 in (16)
  • 4.0 in (124)
  • 4.025 in (16)
  • 4.03 in (28)
  • 4.06 in (28)
  • 4.76 in (24)
  • 4.7625 in (34)
  • 4.763 in (12)
  • 5.0 in (29)
  • 5.025 in (11)
  • 6.0 in (13)
  • 6.35 in (68)
  • 7.94 in (3)
  • 8.0 in (5)
  • 9.525 in (7)
  • 10.0 in (4)
  • 12.5 in (6)
  • 12.7 in (2)
  • 16.0 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (27)
  • 0.03 mm (156)
  • 0.038 mm (433)
  • 0.05 mm (118)
  • 0.051 mm (129)
  • 0.057 mm (43)
  • 0.066 mm (86)
  • 0.07 mm (4)
  • 0.076 mm (206)
  • 0.08 mm (158)
  • 0.081 mm (4)
  • 0.089 mm (68)
  • 0.09 mm (68)
  • 0.094 mm (86)
  • 0.097 mm (47)
  • 0.1 mm (2131)
  • 0.102 mm (911)
  • 0.116 mm (43)
  • 0.117 mm (43)
  • 0.125 mm (17)
  • 0.127 mm (86)
  • 0.13 mm (60)
  • 0.131 mm (86)
  • 0.132 mm (86)
  • 0.133 mm (86)
  • 0.15 mm (117)
  • 0.151 mm (25)
  • 0.152 mm (90)
  • 0.157 mm (86)
  • 0.16 mm (42)
  • 0.165 mm (124)
  • 0.173 mm (86)
  • 0.176 mm (85)
  • 0.177 mm (20)
  • 0.178 mm (168)
  • 0.18 mm (102)
  • 0.185 mm (36)
  • 0.19 mm (192)
  • 0.191 mm (197)
  • 0.198 mm (86)
  • 0.2 mm (4312)
  • 0.202 mm (122)
  • 0.203 mm (1470)
  • 0.21 mm (4)
  • 0.224 mm (86)
  • 0.235 mm (86)
  • 0.244 mm (43)
  • 0.25 mm (150)
  • 0.251 mm (86)
  • 0.254 mm (160)
  • 0.269 mm (86)
  • 0.282 mm (86)
  • 0.284 mm (86)
  • 0.3 mm (434)
  • 0.301 mm (51)
  • 0.305 mm (2)
  • 0.315 mm (106)
  • 0.318 mm (127)
  • 0.325 mm (84)
  • 0.33 mm (86)
  • 0.34 mm (246)
  • 0.343 mm (38)
  • 0.351 mm (1)
  • 0.356 mm (86)
  • 0.375 mm (25)
  • 0.38 mm (102)
  • 0.381 mm (82)
  • 0.394 mm (32)
  • 0.396 mm (3)
  • 0.397 mm (2216)
  • 0.4 mm (5484)
  • 0.404 mm (86)
  • 0.406 mm (206)
  • 0.43 mm (86)
  • 0.432 mm (2)
  • 0.445 mm (124)
  • 0.472 mm (43)
  • 0.49 mm (86)
  • 0.5 mm (231)
  • 0.508 mm (86)
  • 0.52 mm (1)
  • 0.565 mm (20)
  • 0.57 mm (43)
  • 0.572 mm (127)
  • 0.575 mm (81)
  • 0.576 mm (200)
  • 0.6 mm (121)
  • 0.601 mm (1)
  • 0.65 mm (1)
  • 0.7 mm (4)
  • 0.75 mm (70)
  • 0.775 mm (65)
  • 0.787 mm (174)
  • 0.79 mm (332)
  • 0.791 mm (47)
  • 0.792 mm (519)
  • 0.794 mm (2273)
  • 0.795 mm (28)
  • 0.8 mm (6245)
  • 0.826 mm (14)
  • 0.84 mm (52)
  • 0.902 mm (124)
  • 0.93 mm (2)
  • 0.99 mm (1)
  • 1.0 mm (427)
  • 1.05 mm (11)
  • 1.06 mm (161)
  • 1.175 mm (2)
  • 1.18 mm (28)
  • 1.188 mm (179)
  • 1.19 mm (535)
  • 1.191 mm (1762)
  • 1.194 mm (161)
  • 1.195 mm (43)
  • 1.2 mm (2605)
  • 1.201 mm (1166)
  • 1.21 mm (11)
  • 1.22 mm (16)
  • 1.225 mm (2)
  • 1.25 mm (155)
  • 1.5 mm (473)
  • 1.525 mm (64)
  • 1.526 mm (8)
  • 1.55 mm (9)
  • 1.56 mm (225)
  • 1.576 mm (14)
  • 1.585 mm (86)
  • 1.587 mm (359)
  • 1.588 mm (1479)
  • 1.59 mm (309)
  • 1.6 mm (2360)
  • 1.65 mm (225)
  • 1.651 mm (7)
  • 1.75 mm (155)
  • 1.975 mm (15)
  • 1.98 mm (43)
  • 1.981 mm (86)
  • 1.984 mm (7)
  • 2.0 mm (380)
  • 2.025 mm (59)
  • 2.051 mm (9)
  • 2.06 mm (180)
  • 2.25 mm (124)
  • 2.37 mm (180)
  • 2.375 mm (41)
  • 2.38 mm (372)
  • 2.381 mm (217)
  • 2.388 mm (124)
  • 2.39 mm (18)
  • 2.4 mm (793)
  • 2.401 mm (136)
  • 2.44 mm (180)
  • 2.45 mm (8)
  • 2.5 mm (257)
  • 2.525 mm (41)
  • 2.526 mm (8)
  • 2.551 mm (9)
  • 2.56 mm (162)
  • 2.776 mm (1)
  • 3.0 mm (188)
  • 3.025 mm (38)
  • 3.026 mm (7)
  • 3.051 mm (9)
  • 3.06 mm (128)
  • 3.17 mm (128)
  • 3.175 mm (112)
  • 3.176 mm (83)
  • 3.18 mm (140)
  • 3.2 mm (339)
  • 3.24 mm (128)
  • 3.25 mm (5)
  • 3.95 mm (7)
  • 3.96 mm (28)
  • 3.969 mm (16)
  • 3.97 mm (16)
  • 3.975 mm (2)
  • 4.0 mm (169)
  • 4.025 mm (28)
  • 4.03 mm (28)
  • 4.05 mm (9)
  • 4.06 mm (28)
  • 4.76 mm (24)
  • 4.7625 mm (34)
  • 4.763 mm (12)
  • 4.775 mm (70)
  • 5.0 mm (54)
  • 5.025 mm (15)
  • 6.0 mm (48)
  • 6.35 mm (68)
  • 6.351 mm (119)
  • 7.9 mm (2)
  • 7.94 mm (3)
  • 7.95 mm (8)
  • 8.0 mm (22)
  • 9.525 mm (30)
  • 10.0 mm (22)
  • 12.5 mm (18)
  • 12.7 mm (2)
  • 12.701 mm (12)
  • 16.0 mm (10)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (9673)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (9673)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (2847)
  • Interrupted (8)
  • Lightly Interrupted Cut (3792)
  • Smooth Cut (6249)
  • Varying Depth of Cut (4076)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (1477)
  • 241 (359)
  • AC5 (90)
  • CG4 (58)
  • CG5 (23)
  • CG6 (3)
  • CL4 (947)
  • CM1 (23)
  • CM2 (1423)
  • CM3 (1166)
  • CM4 (791)
  • CM5 (95)
  • CPX (1352)
  • CW2 (630)
  • CW2015 (430)
  • CW3020 (15)
  • CW5025 (488)
  • GH1 (93)
  • GH2 (8)
  • GX (855)
  • HCK10 (27)
  • HK1500 (352)
  • HK35 (32)
  • HT2 (1067)
  • HTX (918)
  • HWK10 (1)
  • HWK15 (29)
  • K00379 (103)
  • K060 (895)
  • K090 (1790)
  • K1 (705)
  • K1010P (93)
  • K1025 (106)
  • K10M (2038)
  • K10P (1819)
  • K10U (1786)
  • K11 (49)
  • K15U (1752)
  • K20K (2009)
  • K21 (978)
  • K25M (1766)
  • K25P (1736)
  • K2884 (12)
  • K2885 (232)
  • K313 (4657)
  • K35P (1007)
  • K40 (11)
  • K420 (1860)
  • K45 (1115)
  • K4H (118)
  • K6 (113)
  • K68 (3159)
  • K8 (6)
  • K8735 (26)
  • KB1340 (652)
  • KB1345 (1085)
  • KB1610 (1660)
  • KB1625 (1158)
  • KB1630 (1493)
  • KB5610 (1397)
  • KB5625 (1786)
  • KB5630 (1127)
  • KB9610 (1854)
  • KB9640 (790)
  • KBH10 (1681)
  • KBH10B (966)
  • KBH20 (1806)
  • KBH20B (967)
  • KBK35 (391)
  • KBK45 (57)
  • KC210 (1195)
  • KC250 (1563)
  • KC5010 (4476)
  • KC5020P (256)
  • KC5025 (4007)
  • KC5115RR (2)
  • KC5125RR (2)
  • KC514M (3)
  • KC525M (1)
  • KC5410 (2877)
  • KC5510 (1803)
  • KC5525 (1055)
  • KC710 (895)
  • KC720 (2553)
  • KC722 (555)
  • KC725M (14)
  • KC730 (3663)
  • KC7310 (2151)
  • KC732 (2468)
  • KC735M (24)
  • KC740 (42)
  • KC8050 (3089)
  • KC810 (3103)
  • KC850 (3657)
  • KC9010 (2431)
  • KC9025 (2996)
  • KC910 (3021)
  • KC9105 (2550)
  • KC9110 (3530)
  • KC9110RR (1)
  • KC9115RR (2)
  • KC9120 (2649)
  • KC9125 (3216)
  • KC9125RR (162)
  • KC9140 (1907)
  • KC9145 (1480)
  • KC9210 (160)
  • KC9215 (1804)
  • KC9225 (2844)
  • KC9240 (2754)
  • KC9240NEW (2736)
  • KC9245 (1800)
  • KC9315 (2993)
  • KC9320 (2829)
  • KC9325 (2414)
  • KC935 (3316)
  • KC950 (2867)
  • KC990 (2699)
  • KCD25 (1042)
  • KCK05 (2787)
  • KCK05B (2108)
  • KCK15 (2569)
  • KCK15B (2790)
  • KCK20 (3272)
  • KCK20B (3912)
  • KCM15 (2720)
  • KCM15B (2437)
  • KCM25 (2983)
  • KCM25B (2716)
  • KCM35 (2294)
  • KCM35B (2262)
  • KCP05 (2585)
  • KCP05B (1490)
  • KCP10 (3514)
  • KCP10B (4392)
  • KCP15 (53)
  • KCP25 (3699)
  • KCP25B (4660)
  • KCP30 (2787)
  • KCP30B (1752)
  • KCP40 (1665)
  • KCP40B (1783)
  • KCPK05 (1804)
  • KCPK30 (4)
  • KCS10 (1479)
  • KCS10B (2687)
  • KCSM30 (1)
  • KCU10 (5429)
  • KCU25 (5276)
  • KD050 (1649)
  • KD081 (1515)
  • KD100 (1423)
  • KD105 (173)
  • KD120 (1565)
  • KD1400 (1777)
  • KD1405 (1215)
  • KD1425 (2067)
  • KD200 (11)
  • KD230 (11)
  • KD240 (11)
  • KM1 (875)
  • KMF (434)
  • KMS (105)
  • KT1120 (374)
  • KT125 (1612)
  • KT150 (1308)
  • KT175 (2185)
  • KT315 (3241)
  • KT325 (1208)
  • KT5020 (236)