successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

Brocas de metal duro integral

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Material de la pieza de trabajo
Material de la pieza de trabajo
  • P Acero (5601)
    • P0
      Aceros con bajo contenido de carbono, virutas largas C < 0,25 %; <125 HB; <530 N/mm^2 UTS
      (5115)
    • P1
      Aceros con bajo contenido de carbono, virutas cortas C < 0,25 %; <125 HB; <530 N/mm^2 UTS
      (5115)
    • P2
      Aceros al carbono medios y altos C < 0,25 %; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (5115)
    • P3
      Aceros aleados y aceros para herramientas C > 0,25 %; <330 HB; <35 HRC; entre 600 y 850 N/mm^2 UTS
      (5115)
    • P4
      Aceros aleados y aceros para herramientas C > 0,25 %; entre 350 y 420 HB; entre 35 y 43 HRC; entre 850 y 1400 N/mm^2 UTS
      (5191)
    • P5
      Aceros ferríticos, martensíticos e inoxidables PH <330 HB; <35 HRC; entre 600 y 900 N/mm^2 UTS
      (5574)
    • P6
      Aceros ferríticos, martensíticos e inoxidables PH de alta resistencia Entre 350 y 450 HB; entre 35 y 43 HRC; entre 900 y 2400 N/mm^2 UTS
      (5574)
  • M Acero inoxidable (4047)
    • M1
      Acero inoxidable austenítico Entre 130 y 200 HB; <600 N/mm^2 UTS
      (4047)
    • M2
      Aceros inoxidables fundidos e inoxidables austeníticos de alta resistencia Entre 150 y 230 HB; <25 HRC; <600 N/mm^2 UTS
      (4047)
    • M3
      Acero inoxidable dúplex Entre 135 y 275 HB; <30 HRC; entre 500 y 1200 N/mm^2 UTS
      (4047)
  • K Fundición (4387)
    • K1
      Fundición gris Entre 120 y 290 HB; <32 HRC; entre 125 y 500 N/mm^2 UTS
      (4387)
    • K2
      Fundiciones dúctiles y CGI de baja y media resistencia Entre 130 y 260 HB; <28 HRC; <600 N/mm^2 UTS
      (4292)
    • K3
      Fundición austenítica y dúctil de alta resistencia Entre 180 y 350 HB; <43 HRC; >600 N/mm^2 UTS
      (4292)
  • N Materiales no ferrosos (3703)
    • N1
      Aluminio forjado
      (3681)
    • N2
      Aleaciones de aluminio bajo en silicio y aleaciones de magnesio Si <12,2 %
      (3703)
    • N3
      Aleaciones de aluminio con alto contenido en silicio Si >12,2 %
      (3703)
    • N4
      Base de cobre, latón, zinc en un rango de índice de maquinabilidad de 70–100
      (3681)
  • S Aleaciones de alta temperatura (3888)
    • S1
      Aleaciones basadas en hierro, resistentes al calor Entre 160 y 260 HB; entre 25 y 48 HRC; entre 500 y 1200 N/mm^2 UTS
      (3699)
    • S2
      Aleaciones basadas en cobalto, resistentes al calor Entre 250 y 450 HB; entre 25 y 48 HRC; entre 1000 y 1450 N/mm^2 UTS
      (3699)
    • S3
      Aleaciones basadas en níquel, resistentes al calor Entre 160 y 450 HB; <48 HRC; entre 600 y 1700 N/mm^2 UTS
      (3699)
    • S4
      Titanio y aleaciones de titanio Entre 300 y 450 HB; entre 33 y 43 HRC; entre 900 y 1600 N/mm^2 UTS
      (3888)
  • H Materiales endurecidos (2038)
    • H1
      Materiales endurecidos 44-48 HRC
      (2038)
    • H2
      Materiales endurecidos 48-55 HRC
      (1851)
    • H3
      Materiales endurecidos 56-60 HRC
      (76)
    • H4
      Materiales endurecidos >60 HRC
      (76)
  • C Materiales CFRP (28)
    • C1
      CFRP, CFRP/CFRP
      (10)
    • C2
      CFRP/aluminio CFRP/materiales no ferrosos
      (18)
    • C3
      CFRP/titanio CFRP/altas temperaturas
      (18)
    • C4
      CFRP/acero inoxidable
      (18)
Seleccionar primera opción
  • BR (157)
  • CN (881)
  • DE (856)
  • GB (568)
  • IN (182)
  • SG (297)
  • US (1137)
Aplicaciones
Aplicaciones
  • Convex Drilling Convex Drilling (333)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (195)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (1189)
  • Counterboring Counterboring (195)
  • Countersinking Countersinking (112)
  • Cross Hole Drilling Cross Hole Drilling (2779)
  • Drilling Drilling (6500)
  • Flat Bottom Drilling Flat Bottom Drilling (195)
  • Inclined Entry Drilling Inclined Entry Drilling (290)
  • Inclined Exit Drilling Inclined Exit Drilling (2699)
  • Stacked Plates Drilling Stacked Plates Drilling (5827)
  • X-Offset Drilling X-Offset Drilling (2)
Diámetro del corte
Diámetro del corte
  • 0.098 in (32)
  • 0.119 in (59)
  • 0.122 in (29)
  • 0.125 in (53)
  • 0.126 in (35)
  • 0.13 in (41)
  • 0.134 in (29)
  • 0.138 in (55)
  • 0.143 in (29)
  • 0.146 in (32)
  • 0.15 in (37)
  • 0.154 in (29)
  • 0.156 in (46)
  • 0.157 in (65)
  • 0.161 in (40)
  • 0.165 in (51)
  • 0.169 in (37)
  • 0.177 in (66)
  • 0.181 in (31)
  • 0.185 in (32)
  • 0.188 in (46)
  • 0.189 in (45)
  • 0.193 in (31)
  • 0.197 in (68)
  • 0.201 in (74)
  • 0.206 in (45)
  • 0.209 in (31)
  • 0.213 in (55)
  • 0.217 in (60)
  • 0.219 in (54)
  • 0.221 in (44)
  • 0.224 in (29)
  • 0.228 in (52)
  • 0.237 in (67)
  • 0.24 in (32)
  • 0.244 in (40)
  • 0.25 in (65)
  • 0.252 in (30)
  • 0.256 in (61)
  • 0.257 in (31)
  • 0.26 in (36)
  • 0.264 in (30)
  • 0.266 in (42)
  • 0.268 in (58)
  • 0.272 in (39)
  • 0.276 in (67)
  • 0.281 in (47)
  • 0.291 in (37)
  • 0.295 in (49)
  • 0.297 in (30)
  • 0.307 in (36)
  • 0.313 in (58)
  • 0.315 in (69)
  • 0.319 in (31)
  • 0.323 in (31)
  • 0.328 in (37)
  • 0.335 in (68)
  • 0.339 in (30)
  • 0.343 in (32)
  • 0.345 in (48)
  • 0.347 in (42)
  • 0.354 in (64)
  • 0.358 in (32)
  • 0.359 in (34)
  • 0.374 in (47)
  • 0.375 in (58)
  • 0.386 in (35)
  • 0.391 in (33)
  • 0.394 in (69)
  • 0.402 in (57)
  • 0.406 in (31)
  • 0.408 in (42)
  • 0.414 in (63)
  • 0.422 in (44)
  • 0.425 in (35)
  • 0.433 in (62)
  • 0.438 in (36)
  • 0.453 in (84)
  • 0.465 in (40)
  • 0.47 in (39)
  • 0.473 in (68)
  • 0.484 in (50)
  • 0.492 in (59)
  • 0.5 in (61)
  • 0.512 in (55)
  • 0.516 in (38)
  • 0.531 in (61)
  • 0.551 in (64)
  • 0.564 in (56)
  • 0.572 in (47)
  • 0.591 in (52)
  • 0.61 in (37)
  • 0.625 in (38)
  • 0.63 in (54)
  • 0.65 in (36)
  • 0.669 in (40)
  • 0.69 in (38)
  • 0.709 in (40)
  • 0.748 in (31)
  • 0.787 in (33)
Diámetro del corte Min to Diámetro del corte Max
Diámetro del corte
Diámetro del corte
  • 2.5 mm (32)
  • 3.0 mm (59)
  • 3.1 mm (29)
  • 3.176 mm (53)
  • 3.2 mm (35)
  • 3.301 mm (41)
  • 3.401 mm (29)
  • 3.5 mm (55)
  • 3.6 mm (29)
  • 3.7 mm (32)
  • 3.801 mm (37)
  • 3.901 mm (29)
  • 3.975 mm (45)
  • 4.0 mm (65)
  • 4.101 mm (40)
  • 4.2 mm (51)
  • 4.3 mm (37)
  • 4.5 mm (66)
  • 4.601 mm (31)
  • 4.7 mm (32)
  • 4.775 mm (46)
  • 4.801 mm (45)
  • 4.9 mm (31)
  • 5.0 mm (68)
  • 5.101 mm (74)
  • 5.2 mm (45)
  • 5.301 mm (31)
  • 5.4 mm (55)
  • 5.5 mm (60)
  • 5.551 mm (53)
  • 5.601 mm (37)
  • 5.7 mm (29)
  • 5.801 mm (52)
  • 6.0 mm (67)
  • 6.101 mm (32)
  • 6.2 mm (40)
  • 6.351 mm (65)
  • 6.4 mm (30)
  • 6.5 mm (61)
  • 6.525 mm (31)
  • 6.601 mm (36)
  • 6.7 mm (30)
  • 6.75 mm (42)
  • 6.801 mm (58)
  • 6.9 mm (39)
  • 7.0 mm (67)
  • 7.15 mm (47)
  • 7.4 mm (37)
  • 7.5 mm (49)
  • 7.551 mm (30)
  • 7.801 mm (36)
  • 7.95 mm (58)
  • 8.0 mm (69)
  • 8.1 mm (31)
  • 8.201 mm (31)
  • 8.326 mm (37)
  • 8.5 mm (68)
  • 8.6 mm (30)
  • 8.701 mm (32)
  • 8.725 mm (48)
  • 8.8 mm (42)
  • 9.0 mm (64)
  • 9.1 mm (32)
  • 9.125 mm (34)
  • 9.5 mm (47)
  • 9.525 mm (58)
  • 9.8 mm (35)
  • 9.925 mm (33)
  • 10.0 mm (69)
  • 10.201 mm (57)
  • 10.3 mm (31)
  • 10.326 mm (42)
  • 10.5 mm (63)
  • 10.726 mm (44)
  • 10.8 mm (35)
  • 11.0 mm (62)
  • 11.125 mm (36)
  • 11.5 mm (84)
  • 11.8 mm (40)
  • 11.9 mm (39)
  • 12.0 mm (68)
  • 12.3 mm (50)
  • 12.5 mm (59)
  • 12.701 mm (61)
  • 13.0 mm (55)
  • 13.101 mm (38)
  • 13.5 mm (61)
  • 14.0 mm (64)
  • 14.3 mm (56)
  • 14.5 mm (47)
  • 15.0 mm (52)
  • 15.5 mm (37)
  • 15.875 mm (38)
  • 16.0 mm (54)
  • 16.5 mm (36)
  • 17.0 mm (40)
  • 17.5 mm (38)
  • 18.0 mm (40)
  • 19.0 mm (31)
  • 20.0 mm (33)
Diámetro del corte Min to Diámetro del corte Max
Profundidad de taladrado máxima [L4]
Profundidad de taladrado máxima [L4]
  • 5.0 mm (13)
  • 6.0 mm (22)
  • 9.0 mm (20)
  • 10.0 mm (22)
  • 11.0 mm (18)
  • 12.0 mm (35)
  • 14.0 mm (169)
  • 15.0 mm (7)
  • 17.0 mm (205)
  • 17.401 mm (8)
  • 20.0 mm (249)
  • 21.401 mm (33)
  • 22.0 mm (5)
  • 22.6 mm (6)
  • 23.0 mm (155)
  • 24.0 mm (168)
  • 25.0 mm (28)
  • 25.901 mm (12)
  • 28.3 mm (15)
  • 28.6 mm (35)
  • 29.0 mm (333)
  • 30.0 mm (10)
  • 33.0 mm (65)
  • 34.7 mm (12)
  • 34.9 mm (52)
  • 35.0 mm (548)
  • 36.0 mm (6)
  • 38.1 mm (14)
  • 39.6 mm (12)
  • 40.0 mm (267)
  • 40.301 mm (45)
  • 41.0 mm (65)
  • 43.0 mm (547)
  • 44.0 mm (23)
  • 45.0 mm (185)
  • 48.0 mm (105)
  • 48.7 mm (42)
  • 49.0 mm (324)
  • 51.0 mm (126)
  • 53.1 mm (34)
  • 55.0 mm (97)
  • 55.6 mm (26)
  • 56.0 mm (302)
  • 57.0 mm (79)
  • 58.0 mm (5)
  • 59.0 mm (6)
  • 60.0 mm (242)
  • 63.0 mm (191)
  • 63.5 mm (7)
  • 64.0 mm (55)
  • 64.5 mm (11)
  • 69.0 mm (5)
  • 70.0 mm (7)
  • 71.0 mm (147)
  • 72.0 mm (6)
  • 73.0 mm (9)
  • 74.0 mm (6)
  • 75.0 mm (14)
  • 76.2 mm (8)
  • 77.0 mm (111)
  • 79.0 mm (7)
  • 80.0 mm (113)
  • 83.0 mm (10)
  • 85.0 mm (9)
  • 88.9 mm (8)
  • 89.0 mm (9)
  • 90.0 mm (9)
  • 96.0 mm (106)
  • 100.0 mm (6)
  • 101.601 mm (6)
  • 104.0 mm (10)
  • 106.0 mm (6)
  • 112.0 mm (66)
  • 117.0 mm (13)
  • 118.0 mm (12)
  • 119.0 mm (13)
  • 120.0 mm (17)
  • 128.0 mm (57)
  • 134.0 mm (8)
  • 137.0 mm (6)
  • 141.0 mm (6)
  • 142.0 mm (9)
  • 144.0 mm (45)
  • 149.0 mm (7)
  • 150.0 mm (9)
  • 160.0 mm (33)
  • 164.0 mm (7)
  • 165.0 mm (9)
  • 178.0 mm (7)
  • 180.0 mm (9)
  • 194.0 mm (7)
  • 200.0 mm (9)
  • 210.0 mm (6)
  • 219.0 mm (6)
  • 239.0 mm (6)
  • 240.0 mm (14)
  • 300.0 mm (9)
  • 320.0 mm (6)
  • 360.0 mm (6)
  • 400.0 mm (6)
Profundidad de taladrado máxima [L4] Min to Profundidad de taladrado máxima [L4] Max
Profundidad de taladrado máxima [L4]
Profundidad de taladrado máxima [L4]
  • 0.197 in (13)
  • 0.237 in (22)
  • 0.354 in (20)
  • 0.394 in (22)
  • 0.433 in (18)
  • 0.473 in (35)
  • 0.551 in (169)
  • 0.591 in (7)
  • 0.669 in (205)
  • 0.685 in (8)
  • 0.787 in (249)
  • 0.843 in (33)
  • 0.866 in (5)
  • 0.89 in (6)
  • 0.906 in (155)
  • 0.946 in (168)
  • 0.984 in (28)
  • 1.02 in (12)
  • 1.114 in (15)
  • 1.127 in (35)
  • 1.143 in (333)
  • 1.181 in (10)
  • 1.299 in (65)
  • 1.366 in (12)
  • 1.374 in (52)
  • 1.379 in (548)
  • 1.417 in (6)
  • 1.5 in (14)
  • 1.559 in (12)
  • 1.575 in (267)
  • 1.587 in (45)
  • 1.614 in (65)
  • 1.693 in (547)
  • 1.732 in (23)
  • 1.772 in (185)
  • 1.891 in (105)
  • 1.917 in (42)
  • 1.929 in (324)
  • 2.008 in (126)
  • 2.091 in (34)
  • 2.165 in (97)
  • 2.189 in (26)
  • 2.205 in (302)
  • 2.244 in (79)
  • 2.283 in (5)
  • 2.323 in (6)
  • 2.362 in (242)
  • 2.48 in (191)
  • 2.5 in (7)
  • 2.52 in (55)
  • 2.539 in (11)
  • 2.717 in (5)
  • 2.757 in (7)
  • 2.795 in (147)
  • 2.835 in (6)
  • 2.874 in (9)
  • 2.914 in (6)
  • 2.953 in (14)
  • 3.0 in (8)
  • 3.031 in (111)
  • 3.11 in (7)
  • 3.15 in (113)
  • 3.269 in (10)
  • 3.346 in (9)
  • 3.5 in (8)
  • 3.504 in (9)
  • 3.543 in (9)
  • 3.781 in (106)
  • 3.938 in (6)
  • 4.0 in (6)
  • 4.094 in (10)
  • 4.173 in (6)
  • 4.409 in (66)
  • 4.606 in (13)
  • 4.646 in (12)
  • 4.686 in (13)
  • 4.724 in (17)
  • 5.039 in (57)
  • 5.276 in (8)
  • 5.394 in (6)
  • 5.551 in (6)
  • 5.591 in (9)
  • 5.67 in (45)
  • 5.867 in (7)
  • 5.906 in (9)
  • 6.299 in (33)
  • 6.457 in (7)
  • 6.496 in (9)
  • 7.008 in (7)
  • 7.087 in (9)
  • 7.638 in (7)
  • 7.875 in (9)
  • 8.268 in (6)
  • 8.622 in (6)
  • 9.409 in (6)
  • 9.449 in (14)
  • 11.811 in (9)
  • 12.598 in (6)
  • 14.173 in (6)
  • 15.749 in (6)
Profundidad de taladrado máxima [L4] Min to Profundidad de taladrado máxima [L4] Max
Alcance
Alcance
  • 0.276 in (13)
  • 0.354 in (22)
  • 0.473 in (21)
  • 0.512 in (10)
  • 0.63 in (19)
  • 0.669 in (33)
  • 0.709 in (15)
  • 0.787 in (158)
  • 0.866 in (32)
  • 0.906 in (8)
  • 0.946 in (168)
  • 1.024 in (7)
  • 1.063 in (31)
  • 1.102 in (413)
  • 1.143 in (8)
  • 1.181 in (18)
  • 1.299 in (10)
  • 1.339 in (181)
  • 1.379 in (33)
  • 1.417 in (187)
  • 1.496 in (28)
  • 1.575 in (67)
  • 1.614 in (147)
  • 1.655 in (6)
  • 1.693 in (50)
  • 1.713 in (7)
  • 1.732 in (257)
  • 1.811 in (12)
  • 1.85 in (289)
  • 1.929 in (65)
  • 1.969 in (42)
  • 2.008 in (23)
  • 2.047 in (18)
  • 2.087 in (349)
  • 2.126 in (17)
  • 2.165 in (272)
  • 2.205 in (103)
  • 2.362 in (240)
  • 2.382 in (7)
  • 2.402 in (327)
  • 2.48 in (9)
  • 2.559 in (178)
  • 2.598 in (35)
  • 2.618 in (8)
  • 2.638 in (87)
  • 2.677 in (8)
  • 2.757 in (26)
  • 2.777 in (6)
  • 2.795 in (282)
  • 2.87 in (7)
  • 2.874 in (127)
  • 2.914 in (57)
  • 2.992 in (20)
  • 3.012 in (5)
  • 3.031 in (207)
  • 3.11 in (95)
  • 3.228 in (13)
  • 3.269 in (200)
  • 3.307 in (9)
  • 3.346 in (9)
  • 3.386 in (16)
  • 3.46 in (8)
  • 3.622 in (115)
  • 3.661 in (138)
  • 3.819 in (6)
  • 3.858 in (6)
  • 3.898 in (8)
  • 3.976 in (110)
  • 4.016 in (7)
  • 4.021 in (8)
  • 4.331 in (108)
  • 4.409 in (13)
  • 4.449 in (6)
  • 4.488 in (6)
  • 4.57 in (6)
  • 4.686 in (7)
  • 4.764 in (7)
  • 5.039 in (64)
  • 5.118 in (10)
  • 5.354 in (7)
  • 5.394 in (8)
  • 5.433 in (11)
  • 5.748 in (60)
  • 5.984 in (6)
  • 6.024 in (6)
  • 6.063 in (7)
  • 6.417 in (40)
  • 6.654 in (6)
  • 6.694 in (10)
  • 7.126 in (27)
  • 7.441 in (6)
  • 7.638 in (6)
  • 7.795 in (8)
  • 8.583 in (7)
  • 8.701 in (6)
  • 8.74 in (8)
  • 9.371 in (6)
  • 9.449 in (9)
  • 13.938 in (6)
  • 14.961 in (6)
Alcance Min