Le damos la bienvenida
Confirme sus preferencias
Actualizar preferencias

Sugerencias de productos

Product Family suggestions

Kennametal a su servicio

Atención al cliente

Encuentre los datos de contacto de los centros de atención al cliente de todo el mundo

Pedido rápido
Artículo(s) añadido correctamente al carrito
Ver carrito
¡Frese más por menos con nuestras ofertas por tiempo limitado! Compre ahora

Drill Fix • DFR

Seleccionar filtros
Filtros
Filtros
Ver filtros en
Metric
Inch
keyFilters
Material de la pieza de trabajo
Material de la pieza de trabajo
  • P Acero (211)
    • P0
      Aceros con bajo contenido de carbono, virutas largas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (208)
    • P1
      Aceros con bajo contenido de carbono, virutas cortas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (208)
    • P2
      Aceros al carbono medios y altos C < 0,25 %; <220 HB; <25 HRC; >530 N/mm^2 UTS (209)
    • P3
      Aceros aleados y aceros para herramientas C > 0,25 %; <330 HB; <35 HRC; entre 600 y 850 N/mm^2 UTS (209)
    • P4
      Aceros aleados y aceros para herramientas C > 0,25 %; entre 350 y 420 HB; entre 35 y 43 HRC; entre 850 y 1400 N/mm^2 UTS (208)
    • P5
      Aceros ferríticos, martensíticos e inoxidables PH <330 HB; <35 HRC; entre 600 y 900 N/mm^2 UTS (208)
    • P6
      Aceros ferríticos, martensíticos e inoxidables PH de alta resistencia Entre 350 y 450 HB; entre 35 y 43 HRC; entre 900 y 2400 N/mm^2 UTS (208)
  • M Acero inoxidable (208)
    • M1
      Acero inoxidable austenítico Entre 130 y 200 HB; <600 N/mm^2 UTS (208)
    • M2
      Aceros inoxidables fundidos e inoxidables austeníticos de alta resistencia Entre 150 y 230 HB; <25 HRC; <600 N/mm^2 UTS (208)
    • M3
      Acero inoxidable dúplex Entre 135 y 275 HB; <30 HRC; entre 500 y 1200 N/mm^2 UTS (208)
  • K Fundición (202)
    • K1
      Fundición gris Entre 120 y 290 HB; <32 HRC; entre 125 y 500 N/mm^2 UTS (202)
    • K2
      Fundiciones dúctiles y CGI de baja y media resistencia Entre 130 y 260 HB; <28 HRC; <600 N/mm^2 UTS (202)
    • K3
      Fundición austenítica y dúctil de alta resistencia Entre 180 y 350 HB; <43 HRC; >600 N/mm^2 UTS (202)
  • N Materiales no ferrosos (198)
    • N1
      Aluminio forjado (198)
    • N2
      Aleaciones de aluminio bajo en silicio y aleaciones de magnesio Si <12,2 % (198)
    • N3
      Aleaciones de aluminio con alto contenido en silicio Si >12,2 % (194)
    • N4
      Base de cobre, latón, zinc en un rango de índice de maquinabilidad de 70–100 (198)
    • N5
      Nylon, plásticos, gomas, fenólicos, resinas y fibra de vidrio (198)
    • N6
      Carbono, compuestos de grafito, CFRP (119)
  • S Aleaciones de alta temperatura (208)
    • S1
      Aleaciones basadas en hierro, resistentes al calor Entre 160 y 260 HB; entre 25 y 48 HRC; entre 500 y 1200 N/mm^2 UTS (208)
    • S2
      Aleaciones basadas en cobalto, resistentes al calor Entre 250 y 450 HB; entre 25 y 48 HRC; entre 1000 y 1450 N/mm^2 UTS (208)
    • S3
      Aleaciones basadas en níquel, resistentes al calor Entre 160 y 450 HB; <48 HRC; entre 600 y 1700 N/mm^2 UTS (208)
    • S4
      Titanio y aleaciones de titanio Entre 300 y 450 HB; entre 33 y 43 HRC; entre 900 y 1600 N/mm^2 UTS (208)
Seleccionar primera opción
  • BR (9)
  • CN (70)
  • DE (70)
  • GB (32)
  • IN (3)
  • SG (21)
  • US (59)
Aplicaciones
Aplicaciones
  • Convex Drilling Convex Drilling (160)
  • Drilling Drilling (184)
  • Inclined Entry Drilling Inclined Entry Drilling (160)
  • Inclined Exit Drilling Inclined Exit Drilling (160)
  • X-Offset Drilling X-Offset Drilling (160)
Diámetro del corte
Diámetro del corte
  • 0.492 in (7)
  • 0.5 in (8)
  • 0.512 in (5)
  • 0.531 in (7)
  • 0.551 in (7)
  • 0.564 in (3)
  • 0.572 in (5)
  • 0.591 in (6)
  • 0.595 in (3)
  • 0.61 in (5)
  • 0.625 in (6)
  • 0.63 in (7)
  • 0.65 in (4)
  • 0.656 in (4)
  • 0.669 in (7)
  • 0.689 in (5)
  • 0.69 in (4)
  • 0.704 in (3)
  • 0.709 in (5)
  • 0.728 in (4)
  • 0.734 in (3)
  • 0.748 in (5)
  • 0.75 in (5)
  • 0.768 in (4)
  • 0.781 in (3)
  • 0.787 in (5)
  • 0.807 in (4)
  • 0.814 in (4)
  • 0.828 in (6)
  • 0.845 in (3)
  • 0.866 in (5)
  • 0.875 in (6)
  • 0.906 in (7)
  • 0.939 in (4)
  • 0.946 in (5)
  • 0.969 in (3)
  • 0.984 in (2)
  • 1.0 in (5)
Diámetro del corte Min a Diámetro del corte Max
Diámetro del corte
Diámetro del corte
  • 12.5 mm (7)
  • 12.701 mm (8)
  • 13.0 mm (5)
  • 13.476 mm (2)
  • 13.5 mm (5)
  • 14.0 mm (7)
  • 14.3 mm (3)
  • 14.5 mm (5)
  • 15.0 mm (6)
  • 15.101 mm (3)
  • 15.5 mm (5)
  • 15.875 mm (6)
  • 16.0 mm (7)
  • 16.5 mm (4)
  • 16.651 mm (4)
  • 17.0 mm (7)
  • 17.475 mm (5)
  • 17.5 mm (4)
  • 17.85 mm (3)
  • 18.0 mm (5)
  • 18.5 mm (4)
  • 18.651 mm (3)
  • 19.0 mm (5)
  • 19.05 mm (5)
  • 19.5 mm (4)
  • 19.826 mm (3)
  • 20.0 mm (5)
  • 20.5 mm (4)
  • 20.651 mm (4)
  • 21.0 mm (6)
  • 21.451 mm (3)
  • 22.0 mm (5)
  • 22.225 mm (6)
  • 23.0 mm (7)
  • 23.826 mm (4)
  • 24.0 mm (5)
  • 24.625 mm (3)
  • 25.0 mm (2)
  • 25.401 mm (5)
Diámetro del corte Min a Diámetro del corte Max
Condiciones del corte
Condiciones del corte
  • Interrupted (24)
  • Stable (30)
  • Unstable (30)
Profundidad de taladrado máxima [L4]
Profundidad de taladrado máxima [L4]
  • 25.0 mm (2)
  • 25.401 mm (2)
  • 26.0 mm (1)
  • 27.0 mm (1)
  • 28.0 mm (2)
  • 28.6 mm (1)
  • 29.0 mm (2)
  • 30.0 mm (1)
  • 31.0 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (2)
  • 33.0 mm (1)
  • 34.0 mm (2)
  • 34.95 mm (1)
  • 35.0 mm (1)
  • 36.0 mm (1)
  • 37.0 mm (1)
  • 37.5 mm (3)
  • 38.0 mm (1)
  • 38.1 mm (4)
  • 39.0 mm (4)
  • 40.0 mm (1)
  • 40.45 mm (1)
  • 40.5 mm (2)
  • 41.0 mm (1)
  • 41.301 mm (1)
  • 42.0 mm (4)
  • 42.901 mm (2)
  • 43.5 mm (2)
  • 44.0 mm (1)
  • 44.45 mm (1)
  • 45.0 mm (3)
  • 45.276 mm (2)
  • 46.0 mm (1)
  • 46.5 mm (2)
  • 47.625 mm (3)
  • 47.651 mm (1)
  • 48.0 mm (4)
  • 49.5 mm (1)
  • 49.975 mm (3)
  • 50.0 mm (2)
  • 50.801 mm (3)
  • 51.0 mm (3)
  • 52.0 mm (1)
  • 52.426 mm (3)
  • 52.5 mm (2)
  • 53.575 mm (2)
  • 53.95 mm (1)
  • 54.0 mm (5)
  • 55.5 mm (2)
  • 55.926 mm (2)
  • 56.0 mm (2)
  • 57.0 mm (3)
  • 57.151 mm (3)
  • 57.2 mm (1)
  • 58.0 mm (1)
  • 58.5 mm (2)
  • 59.5 mm (2)
  • 60.0 mm (5)
  • 60.35 mm (1)
  • 61.5 mm (2)
  • 61.95 mm (2)
  • 62.0 mm (2)
  • 63.0 mm (4)
  • 63.5 mm (2)
  • 64.0 mm (2)
  • 64.325 mm (2)
  • 66.0 mm (5)
  • 66.65 mm (1)
  • 66.675 mm (4)
  • 68.0 mm (2)
  • 69.0 mm (3)
  • 69.025 mm (1)
  • 69.9 mm (1)
  • 70.0 mm (1)
  • 71.425 mm (1)
  • 71.476 mm (2)
  • 72.0 mm (4)
  • 73.851 mm (2)
  • 74.0 mm (1)
  • 74.575 mm (1)
  • 74.976 mm (1)
  • 76.0 mm (1)
  • 76.2 mm (3)
  • 78.0 mm (1)
  • 79.351 mm (1)
  • 80.0 mm (1)
  • 82.0 mm (1)
  • 82.601 mm (1)
  • 84.0 mm (1)
  • 85.75 mm (1)
  • 88.0 mm (1)
  • 88.9 mm (1)
  • 92.0 mm (1)
  • 92.051 mm (1)
  • 95.301 mm (1)
  • 96.0 mm (1)
  • 97.426 mm (1)
  • 98.45 mm (1)
  • 101.601 mm (2)
Profundidad de taladrado máxima [L4] Min a Profundidad de taladrado máxima [L4] Max
Profundidad de taladrado máxima [L4]
Profundidad de taladrado máxima [L4]
  • 0.984 in (2)
  • 1.0 in (2)
  • 1.024 in (1)
  • 1.063 in (1)
  • 1.102 in (2)
  • 1.127 in (1)
  • 1.143 in (2)
  • 1.181 in (1)
  • 1.22 in (1)
  • 1.25 in (1)
  • 1.26 in (2)
  • 1.299 in (1)
  • 1.339 in (2)
  • 1.377 in (1)
  • 1.379 in (1)
  • 1.417 in (1)
  • 1.457 in (1)
  • 1.476 in (3)
  • 1.496 in (1)
  • 1.5 in (4)
  • 1.536 in (4)
  • 1.575 in (1)
  • 1.593 in (1)
  • 1.594 in (2)
  • 1.614 in (1)
  • 1.627 in (1)
  • 1.655 in (4)
  • 1.689 in (2)
  • 1.713 in (2)
  • 1.732 in (1)
  • 1.75 in (1)
  • 1.772 in (3)
  • 1.784 in (2)
  • 1.811 in (1)
  • 1.831 in (2)
  • 1.875 in (3)
  • 1.877 in (1)
  • 1.891 in (4)
  • 1.949 in (1)
  • 1.968 in (3)
  • 1.969 in (2)
  • 2.0 in (3)
  • 2.008 in (3)
  • 2.047 in (1)
  • 2.064 in (3)
  • 2.067 in (2)
  • 2.109 in (2)
  • 2.124 in (1)
  • 2.126 in (5)
  • 2.185 in (2)
  • 2.202 in (2)
  • 2.205 in (2)
  • 2.244 in (3)
  • 2.25 in (3)
  • 2.253 in (1)
  • 2.283 in (1)
  • 2.303 in (2)
  • 2.343 in (2)
  • 2.362 in (5)
  • 2.376 in (1)
  • 2.422 in (2)
  • 2.439 in (2)
  • 2.441 in (2)
  • 2.48 in (4)
  • 2.5 in (2)
  • 2.52 in (2)
  • 2.532 in (2)
  • 2.598 in (5)
  • 2.624 in (1)
  • 2.625 in (4)
  • 2.677 in (2)
  • 2.717 in (3)
  • 2.718 in (1)
  • 2.753 in (1)
  • 2.757 in (1)
  • 2.813 in (1)
  • 2.814 in (2)
  • 2.835 in (4)
  • 2.908 in (2)
  • 2.914 in (1)
  • 2.936 in (1)
  • 2.952 in (1)
  • 2.992 in (1)
  • 3.0 in (3)
  • 3.071 in (1)
  • 3.124 in (1)
  • 3.15 in (1)
  • 3.228 in (1)
  • 3.253 in (1)
  • 3.307 in (1)
  • 3.376 in (1)
  • 3.465 in (1)
  • 3.5 in (1)
  • 3.622 in (1)
  • 3.624 in (1)
  • 3.753 in (1)
  • 3.781 in (1)
  • 3.837 in (1)
  • 3.876 in (1)
  • 4.0 in (2)
Profundidad de taladrado máxima [L4] Min a Profundidad de taladrado máxima [L4] Max
Alcance
Alcance
  • 1.024 in (1)
  • 1.102 in (1)
  • 1.143 in (3)
  • 1.181 in (2)
  • 1.22 in (1)
  • 1.26 in (1)
  • 1.299 in (1)
  • 1.339 in (1)
  • 1.379 in (2)
  • 1.417 in (2)
  • 1.457 in (2)
  • 1.496 in (2)
  • 1.614 in (3)
  • 1.655 in (3)
  • 1.693 in (1)
  • 1.732 in (3)
  • 1.772 in (6)
  • 1.811 in (4)
  • 1.85 in (2)
  • 1.891 in (1)
  • 1.929 in (3)
  • 1.969 in (5)
  • 2.008 in (4)
  • 2.047 in (2)
  • 2.087 in (4)
  • 2.126 in (8)
  • 2.165 in (1)
  • 2.205 in (4)
  • 2.244 in (3)
  • 2.283 in (3)
  • 2.323 in (4)
  • 2.362 in (5)
  • 2.402 in (4)
  • 2.441 in (1)
  • 2.48 in (5)
  • 2.52 in (4)
  • 2.559 in (6)
  • 2.598 in (2)
  • 2.638 in (4)
  • 2.677 in (5)
  • 2.757 in (7)
  • 2.795 in (2)
  • 2.835 in (2)
  • 2.914 in (2)
  • 2.953 in (3)
  • 2.992 in (2)
  • 3.031 in (3)
  • 3.071 in (4)
  • 3.11 in (3)
  • 3.15 in (2)
  • 3.189 in (4)
  • 3.228 in (5)
  • 3.269 in (1)
  • 3.307 in (2)
  • 3.346 in (2)
  • 3.386 in (1)
  • 3.426 in (4)
  • 3.504 in (1)
  • 3.543 in (1)
  • 3.583 in (2)
  • 3.701 in (1)
  • 3.74 in (1)
  • 3.781 in (1)
  • 3.858 in (1)
  • 3.938 in (1)
  • 3.976 in (1)
  • 4.094 in (2)
  • 4.173 in (1)
  • 4.213 in (2)
  • 4.252 in (1)
Alcance Min a Alcance Max
Alcance
Alcance
  • 26.0 mm (1)
  • 28.0 mm (1)
  • 29.0 mm (3)
  • 30.0 mm (2)
  • 31.0 mm (1)
  • 32.0 mm (1)
  • 33.0 mm (1)
  • 34.0 mm (1)
  • 35.0 mm (2)
  • 36.0 mm (2)
  • 37.0 mm (2)
  • 38.0 mm (2)
  • 41.0 mm (3)
  • 42.0 mm (3)
  • 43.0 mm (1)
  • 44.0 mm (3)
  • 45.0 mm (6)
  • 46.0 mm (4)
  • 47.0 mm (2)
  • 48.0 mm (1)
  • 49.0 mm (3)
  • 50.0 mm (5)
  • 51.0 mm (4)
  • 52.0 mm (2)
  • 53.0 mm (4)
  • 54.0 mm (8)
  • 55.0 mm (1)
  • 56.0 mm (4)
  • 57.0 mm (3)
  • 58.0 mm (3)
  • 59.0 mm (4)
  • 60.0 mm (5)
  • 61.0 mm (4)
  • 62.0 mm (1)
  • 63.0 mm (5)
  • 64.0 mm (4)
  • 65.0 mm (6)
  • 66.0 mm (2)
  • 67.0 mm (4)
  • 68.0 mm (5)
  • 70.0 mm (7)
  • 71.0 mm (2)
  • 72.0 mm (2)
  • 74.0 mm (2)
  • 75.0 mm (3)
  • 76.0 mm (2)
  • 77.0 mm (3)
  • 78.0 mm (4)
  • 79.0 mm (3)
  • 80.0 mm (2)
  • 81.0 mm (4)
  • 82.0 mm (5)
  • 83.0 mm (1)
  • 84.0 mm (2)
  • 85.0 mm (2)
  • 86.0 mm (1)
  • 87.0 mm (4)
  • 89.0 mm (1)
  • 90.0 mm (1)
  • 91.0 mm (2)
  • 94.0 mm (1)
  • 95.0 mm (1)
  • 96.0 mm (1)
  • 98.0 mm (1)
  • 100.0 mm (1)
  • 101.0 mm (1)
  • 104.0 mm (2)
  • 106.0 mm (1)
  • 107.0 mm (2)
  • 108.0 mm (1)
Alcance Min a Alcance Max
Estilo de conexión
Estilo de conexión
  • Cylindrical Shank 1 Flat (24)
  • Cylindrical Shank 2 Flats (60)
  • KM (24)
  • Whistle Drive 2 (39)
  • Whistle Notch 2 CylindricalEnd (37)
Número de canales
Número de canales
  • 2 (184)
Filos de corte por plaquita
Filos de corte por plaquita
  • 1.0 (54)
  • 2.0 (213)
Filos de corte por plaquita Min a Filos de corte por plaquita Max
Capacidad de refrigeración interna
Capacidad de refrigeración interna
Longitud total [L]
Longitud total [L]
  • 3.622 in (1)
  • 3.637 in (1)
  • 3.653 in (1)
  • 3.656 in (1)
  • 3.676 in (1)
  • 3.714 in (1)
  • 3.716 in (1)
  • 3.755 in (1)
  • 3.819 in (1)
  • 3.833 in (1)
  • 3.873 in (1)
  • 3.912 in (1)
  • 3.938 in (1)
  • 3.95 in (1)
  • 3.952 in (2)
  • 3.991 in (1)
  • 4.055 in (1)
  • 4.069 in (1)
  • 4.078 in (1)
  • 4.122 in (1)
  • 4.13 in (1)
  • 4.154 in (1)
  • 4.173 in (1)
  • 4.188 in (1)
  • 4.202 in (1)
  • 4.228 in (1)
  • 4.247 in (1)
  • 4.25 in (1)
  • 4.273 in (1)
  • 4.306 in (1)
  • 4.311 in (1)
  • 4.331 in (1)
  • 4.346 in (1)
  • 4.351 in (1)
  • 4.37 in (1)
  • 4.375 in (1)
  • 4.429 in (1)
  • 4.439 in (1)
  • 4.444 in (1)
  • 4.449 in (1)
  • 4.488 in (1)
  • 4.5 in (2)
  • 4.503 in (1)
  • 4.505 in (1)
  • 4.562 in (1)
  • 4.606 in (1)
  • 4.621 in (1)
  • 4.622 in (1)
  • 4.626 in (1)
  • 4.646 in (1)
  • 4.686 in (2)
  • 4.705 in (1)
  • 4.742 in (1)
  • 4.744 in (1)
  • 4.764 in (1)
  • 4.781 in (1)
  • 4.783 in (1)
  • 4.803 in (2)
  • 4.807 in (1)
  • 4.821 in (1)
  • 4.827 in (1)
  • 4.835 in (1)
  • 4.843 in (1)
  • 4.86 in (1)
  • 4.9 in (1)
  • 4.902 in (1)
  • 4.923 in (1)
  • 4.939 in (1)
  • 4.953 in (1)
  • 4.961 in (1)
  • 4.978 in (1)
  • 4.998 in (1)
  • 5.0 in (1)
  • 5.005 in (1)
  • 5.019 in (1)
  • 5.039 in (1)
  • 5.045 in (1)
  • 5.057 in (1)
  • 5.059 in (2)
  • 5.079 in (1)
  • 5.117 in (1)
  • 5.118 in (1)
  • 5.127 in (1)
  • 5.136 in (1)
  • 5.157 in (1)
  • 5.175 in (1)
  • 5.178 in (1)
  • 5.179 in (1)
  • 5.208 in (1)
  • 5.219 in (1)
  • 5.22 in (1)
  • 5.234 in (1)
  • 5.236 in (1)
  • 5.255 in (1)
  • 5.268 in (1)
  • 5.276 in (1)
  • 5.297 in (1)
  • 5.298 in (1)
  • 5.354 in (1)
  • 5.36 in (1)
  • 5.376 in (1)
  • 5.38 in (1)
  • 5.392 in (1)
  • 5.412 in (1)
  • 5.433 in (1)
  • 5.45 in (1)
  • 5.452 in (1)
  • 5.455 in (1)
  • 5.461 in (1)
  • 5.474 in (1)
  • 5.51 in (1)
  • 5.518 in (1)
  • 5.533 in (1)
  • 5.569 in (1)
  • 5.628 in (1)
  • 5.648 in (2)
  • 5.652 in (1)
  • 5.687 in (1)
  • 5.71 in (1)
  • 5.74 in (1)
  • 5.746 in (1)
  • 5.771 in (1)
  • 5.787 in (1)
  • 5.827 in (1)
  • 5.865 in (1)
  • 5.888 in (1)
  • 5.923 in (2)
  • 5.986 in (1)
  • 5.992 in (1)
  • 6.019 in (1)
  • 6.024 in (1)
  • 6.045 in (1)
  • 6.102 in (1)
  • 6.115 in (1)
  • 6.127 in (1)
  • 6.163 in (1)
  • 6.181 in (1)
  • 6.22 in (1)
  • 6.26 in (1)
  • 6.268 in (1)
  • 6.281 in (1)
  • 6.339 in (1)
  • 6.36 in (1)
  • 6.4 in (1)
  • 6.417 in (1)
  • 6.45 in (1)
  • 6.461 in (1)
  • 6.496 in (1)
  • 6.575 in (1)
  • 6.579 in (1)
  • 6.649 in (1)
  • 6.654 in (1)
  • 6.707 in (1)
  • 6.732 in (1)
  • 6.74 in (1)
  • 6.83 in (1)
  • 6.835 in (1)
  • 6.891 in (1)
  • 6.929 in (1)
  • 6.954 in (1)
  • 7.018 in (1)
  • 7.024 in (1)
  • 7.047 in (1)
  • 7.069 in (1)
  • 7.115 in (1)
  • 7.142 in (1)
  • 7.205 in (1)
  • 7.274 in (1)
  • 7.365 in (1)
  • 7.492 in (1)
  • 7.615 in (1)
  • 7.739 in (1)
  • 7.867 in (1)
  • 7.992 in (1)
  • 8.051 in (1)
  • 8.115 in (1)
  • 8.365 in (1)
Longitud total [L] Min a Longitud total [L] Max
Longitud total [L]
Longitud total [L]
  • 92.0 mm (1)
  • 92.375 mm (1)
  • 92.775 mm (1)
  • 92.825 mm (1)
  • 93.375 mm (1)
  • 94.325 mm (1)
  • 94.375 mm (1)
  • 95.375 mm (1)
  • 97.0 mm (1)
  • 97.325 mm (1)
  • 98.375 mm (1)
  • 99.375 mm (1)
  • 100.0 mm (1)
  • 100.325 mm (1)
  • 100.375 mm (2)
  • 101.375 mm (1)
  • 103.0 mm (1)
  • 103.325 mm (1)
  • 103.575 mm (1)
  • 104.7 mm (1)
  • 104.875 mm (1)
  • 105.476 mm (1)
  • 106.0 mm (1)
  • 106.375 mm (1)
  • 106.726 mm (1)
  • 107.4 mm (1)
  • 107.875 mm (1)
  • 107.95 mm (1)
  • 108.525 mm (1)
  • 109.375 mm (1)
  • 109.5 mm (1)
  • 110.0 mm (1)
  • 110.4 mm (1)
  • 110.5 mm (1)
  • 111.0 mm (1)
  • 111.125 mm (1)
  • 112.5 mm (1)
  • 112.75 mm (1)
  • 112.875 mm (1)
  • 113.0 mm (1)
  • 114.0 mm (1)
  • 114.301 mm (2)
  • 114.375 mm (1)
  • 114.4 mm (1)
  • 115.875 mm (1)
  • 117.0 mm (1)
  • 117.375 mm (1)
  • 117.4 mm (1)
  • 117.5 mm (1)
  • 117.976 mm (1)
  • 119.0 mm (2)
  • 119.5 mm (1)
  • 120.45 mm (1)
  • 120.5 mm (1)
  • 121.0 mm (1)
  • 121.45 mm (1)
  • 121.5 mm (1)
  • 122.0 mm (2)
  • 122.101 mm (1)
  • 122.45 mm (1)
  • 122.601 mm (1)
  • 122.801 mm (1)
  • 123.0 mm (1)
  • 123.45 mm (1)
  • 124.45 mm (1)
  • 124.5 mm (1)
  • 125.051 mm (1)
  • 125.45 mm (1)
  • 125.801 mm (1)
  • 126.0 mm (1)
  • 126.45 mm (1)
  • 126.95 mm (1)
  • 127.0 mm (1)
  • 127.101 mm (1)
  • 127.476 mm (1)
  • 128.0 mm (1)
  • 128.15 mm (1)
  • 128.451 mm (1)
  • 128.5 mm (2)
  • 129.0 mm (1)
  • 129.951 mm (1)
  • 130.0 mm (1)
  • 130.225 mm (1)
  • 130.451 mm (1)
  • 131.0 mm (1)
  • 131.451 mm (1)
  • 131.5 mm (1)
  • 131.55 mm (1)
  • 132.275 mm (1)
  • 132.55 mm (1)
  • 132.576 mm (1)
  • 132.951 mm (1)
  • 133.0 mm (1)
  • 133.451 mm (1)
  • 133.8 mm (1)
  • 134.0 mm (1)
  • 134.55 mm (1)
  • 134.576 mm (1)
  • 136.0 mm (1)
  • 136.15 mm (1)
  • 136.55 mm (1)
  • 136.625 mm (1)
  • 136.951 mm (1)
  • 137.451 mm (1)
  • 138.0 mm (1)
  • 138.425 mm (1)
  • 138.451 mm (1)
  • 138.55 mm (1)
  • 138.701 mm (1)
  • 139.05 mm (1)
  • 139.951 mm (1)
  • 140.15 mm (1)
  • 140.55 mm (1)
  • 141.451 mm (1)
  • 142.951 mm (1)
  • 143.451 mm (2)
  • 143.55 mm (1)
  • 144.451 mm (1)
  • 145.0 mm (1)
  • 145.8 mm (1)
  • 145.951 mm (1)
  • 146.55 mm (1)
  • 147.0 mm (1)
  • 148.0 mm (1)
  • 148.975 mm (1)
  • 149.55 mm (1)
  • 150.451 mm (2)
  • 152.05 mm (1)
  • 152.175 mm (1)
  • 152.875 mm (1)
  • 153.0 mm (1)
  • 153.55 mm (1)
  • 155.0 mm (1)
  • 155.326 mm (1)
  • 155.625 mm (1)
  • 156.55 mm (1)
  • 157.0 mm (1)
  • 157.976 mm (1)
  • 159.0 mm (1)
  • 159.201 mm (1)
  • 159.55 mm (1)
  • 161.0 mm (1)
  • 161.55 mm (1)
  • 162.55 mm (1)
  • 163.0 mm (1)
  • 163.826 mm (1)
  • 164.101 mm (1)
  • 165.0 mm (1)
  • 167.0 mm (1)
  • 167.101 mm (1)
  • 168.851 mm (1)
  • 169.0 mm (1)
  • 170.351 mm (1)
  • 171.0 mm (1)
  • 171.201 mm (1)
  • 173.476 mm (1)
  • 173.576 mm (1)
  • 175.0 mm (1)
  • 176.0 mm (1)
  • 176.625 mm (1)
  • 178.25 mm (1)
  • 178.375 mm (1)
  • 179.0 mm (1)
  • 179.525 mm (1)
  • 180.726 mm (1)
  • 181.4 mm (1)
  • 183.0 mm (1)
  • 184.75 mm (1)
  • 187.076 mm (1)
  • 190.275 mm (1)
  • 193.425 mm (1)
  • 196.576 mm (1)
  • 199.826 mm (1)
  • 202.976 mm (1)
  • 204.5 mm (1)
  • 206.125 mm (1)
  • 212.476 mm (1)
Longitud total [L] Min a Longitud total [L] Max
cornerConfiguration
Radio de esquina
Radio de esquina
  • 0.016 in (30)
Radio de esquina Min a Radio de esquina Max
Radio de esquina
Radio de esquina
  • 0.4 mm (30)
Radio de esquina Min a Radio de esquina Max
Bisel en esquina
Bisel en esquina
  • 0.0 mm (30)
Bisel en esquina Min a Bisel en esquina Max
Bisel en esquina
Bisel en esquina
  • 0.0 in (30)
Bisel en esquina Min a Bisel en esquina Max
application
Profundidad de corte mínima
Alimentación mínima
Alimentación mínima
Calidad de herramienta de corte
Calidad de herramienta de corte
  • KC7020 (184)
  • KC7025 (184)
  • KC7140 (193)
  • KC7225 (184)
  • KC7815 (184)
  • KC7820 (184)
  • KCMS35 (117)
  • KCPK10 (187)
  • KCU25 (190)
  • KCU40 (193)
  • KD1425 (54)
Dirección de la herramienta
Dirección de la herramienta
  • R (184)
Plaquita rascadora
Plaquita rascadora
  • N (30)
Tipo de broca
Tipo de broca
  • 86-01 (184)
insertGeometry
Forma
Forma
  • B-PARALLELOGRAM 82 (30)
Tamaño de IC de plaquita
Tamaño de IC de plaquita
  • 6.0 mm (19)
  • 8.0 mm (10)
Tamaño de IC de plaquita Min a Tamaño de IC de plaquita Max
Tamaño de IC de plaquita
Tamaño de IC de plaquita
  • 0.237 in (19)
  • 0.315 in (10)
Tamaño de IC de plaquita Min a Tamaño de IC de plaquita Max
Rompevirutas CBMD
Rompevirutas CBMD
  • GD (12)
  • LD (6)
  • MD (11)
Material herramienta corte
Material herramienta corte
  • D P (1)
  • H W (29)
backEnd
Tipo de conexión
Tipo de conexión
  • CYLINDRICAL (160)
  • TAPER SHANK (24)
Tamaño de sistema
Tamaño de sistema
  • KM32TS (1)
  • KM40TS (21)
  • KM50TS (2)
Diámetro de extremo posterior
Diámetro de extremo posterior
  • 19.05 mm (23)
  • 20.0 mm (50)
  • 25.0 mm (11)
  • 25.401 mm (35)
  • 31.75 mm (2)
  • 32.0 mm (40)
  • 40.0 mm (21)
  • 50.0 mm (2)
Diámetro de extremo posterior Min a Diámetro de extremo posterior Max
Diámetro de extremo posterior
Diámetro de extremo posterior
  • 0.75 in (23)
  • 0.787 in (50)
  • 0.984 in (11)
  • 1.0 in (35)
  • 1.25 in (2)
  • 1.26 in (40)
  • 1.575 in (21)
  • 1.969 in (2)
Diámetro de extremo posterior Min a Diámetro de extremo posterior Max
No filters matching ""

Drill Fix DFR • Sistema métrico

(160) Drill Fix DFR • Sistema métrico

Drill Fix DFR • Plaquitas

(30) Drill Fix DFR • Plaquitas

Drill Fix DFR • KM-TS

(24) Drill Fix DFR • KM-TS
Está a punto de añadir a su página Mis soluciones. ¿Desea continuar?
product-image
Please adjust the following properties from

ISO catálogo

ANSI catálogo

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Debe iniciar sesión para ver la información de su panel de control
Session expired due to inactivity, please login again
El/los producto/s () que estaba intentando añadir al carrito no está/están disponibles Contacto del servicio de atención al cliente.
artículo(s) añadido(s) correctamente al carrito
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO catálogo Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Gracias por haberse registrado correctamente. Usted dispone ahora de acceso inmediato para conectarse y utilizar la página web.

You are about to leave the Solution building process.

Are you sure you want to leave?