Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje
Sugestie dotyczące produktów
Product Family suggestions
Witaj, User Name
Wybrane konto:
Wystąpił problem z Twoim kontem. Skontaktuj się z działem obsługi klienta.
Konto kupującego
Zmień konto
Konto odbiorcy
Zmień konto
- Panel przyborów
- Zarządzaj zamówieniami
- Zarządzaj kanałami
- Książka adresowa
-
Powiadomienia
Oznacz wszystkie jako przeczytane - Zmień hasło
- Mój profil
- Wyloguj się
Pozycje
pomyślnie dodano do koszyka
Wyświetl koszyk
Wyświetl koszyk
Frezuj więcej za mniej dzięki naszym ofertom ograniczonym czasowo!
Kup teraz.
Pozycje
pomyślnie dodano do koszyka
Wyświetl koszyk
Wyświetl koszyk
Edytuj
Dodaj
Nazwa : {{SolutionName}}- Produkty
- /
- Narzędzia do obróbki skrawaniem
- /
- Obróbka otworów
- /
- Wiertła monolityczne z węglika spiekanego
- /
- Wiertła KMH • Materiały twarde
- /
- B951A (~3 x D) • KCH15 • A-Shank • KMH Drills
Sending to SolidCAM in progress...
Downloaded file will be available after import in the SolidCAM tool library.
B951A (~3 x D) • KCH15 • A-Shank • KMH Drills
Wiertła KMH • Materiały hartowane • Chłodzenie wewnętrzne
Właściwości i zalety
- The all new KMH solid carbide drills are engineered for hard material applications up to 65 HRC. The B95_ drill series with through coolant and 140° point is designed for deeper applications.
- KMH Point Design with curved cutting edge with corner chamfer for maximum corner stability in hard materials. It avoids chipping on cutting edge thus pre-mature wear.
- Special flute design with strong web to increase the strength of the drill in tough applications with short chips. B95_ series with 30° helix angle to improve chip evacuation in higher length-to-diameter ratios.
- KCH15 on B95_ with its higher toughness supports edge strength at increased rake angles, which are applied to improve chip evacuation in higher L/D ratios. It carries a high temperature and shock resistance AlTiN coating for machining hardened material to increase tool life.
Zastosowania
- Drilling
- Drilling: Stacked Plates
- Corner Style: Corner Chamfer
- Tool Dimensions: 2flute/2margin/coolant
- DIN number 6535
- DIN number 6537
- Drilling - Through Coolant
- Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
- Shank - Cylindrical Plain ≤h6
- Helix Angle: 30°
Tolerance • Metric | ||
nominal size range | D1 tolerance m7 | D tolerance h6 |
|
0,004/0,016 | 0,000/-0,008 |
|
0,006/0,021 | 0,000/-0,009 |
|
0,007/0,025 | 0,000/-0,011 |
|
0,008/0,029 | 0,000/-0,013 |
Tolerance • Inch | ||
nominal size range | D1 tolerance m7 | D tolerance h6 |
|
.0002/.0006 | .0000/-.0003 |
|
.0002/.0008 | .0000/-.0004 |
|
.0003/.0010 | .0000/-.0004 |
|
.0003/.0011 | .0000/-.0005 |
Material
|
<="" td=""> | <="" td="" /> | |||||||||||
Cutting Speed
|
Metric | ||||||||||||
Range
|
Recommended Feed Rate per Rev | ||||||||||||
Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
P | 4 | 50 | 70 | 100 | mm/r | 0,06–0,15 | 0,08–0,17 | 0,12–0,23 | 0,14–0,28 | 0,17–0,33 | 0,19–0,38 | 0,23–0,47 | 0,29–0,59 |
5 | 50 | 60 | 80 | mm/r | 0,08–0,14 | 0,10–0,16 | 0,12–0,20 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 | |
6 | 40 | 50 | 70 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,08–0,14 | 0,10–0,18 | 0,13–0,22 | 0,14–0,24 | 0,18–0,32 | 0,23–0,41 | |
K | 1 | 80 | 130 | 170 | mm/r | 0,11–0,22 | 0,12–0,24 | 0,16–0,31 | 0,20–0,38 | 0,23–0,44 | 0,25–0,49 | 0,31–0,06 | 0,38–0,47 |
2 | 90 | 110 | 120 | mm/r | 0,10–0,17 | 0,12–0,19 | 0,16–0,25 | 0,20–0,31 | 0,23–0,36 | 0,25–0,40 | 0,31–0,48 | 0,38–0,60 | |
3 | 80 | 110 | 130 | mm/r | 0,07–0,15 | 0,09–0,19 | 0,12–0,25 | 0,14–0,30 | 0,17–0,35 | 0,19–0,40 | 0,25–0,48 | 0,30–0,60 | |
H | 1 | 20 | 35 | 45 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,06–0,10 | 0,08–0,12 | 0,09–0,13 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 |
2 | 15 | 30 | 45 | mm/r | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 | |
3 | 15 | 25 | 40 | mm/r | 0,02–0,04 | 0,02–0,05 | 0,04–0,07 | 0,06–0,09 | 0,07–0,10 | 0,08–0,11 | 0,09–0,13 | 0,10–0,15 | |
4 | 15 | 20 | 35 | mm/r | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 |
Material
|
<="" td=""> | <="" td="" /> | |||||||||||
Material
|
Cutting Speed
|
Inch | |||||||||||
Range
|
Recommended Feed Rate per Rev | ||||||||||||
Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
P | 4 | 160 | 230 | 330 | IPR | .0024-.0059 | .0031-.0067 | .0047-.0091 | .0055-.0110 | .0067-.0130 | .0075-.0150 | .0091-.0185 | .0114-.0232 |
5 | 160 | 200 | 260 | IPR | .0031–.0055 | .0039–.0079 | .0047–.0079 | .0063–.0094 | .0079–.0110 | .0094–.0126 | .0110–.0157 | .0126–.0189 | |
6 | 130 | 160 | 230 | IPR | .0020-.0031 | .0024-.0039 | .0031-.0055 | .0039-.0071 | .0051-.0087 | .0055-.0094 | .0071-.0126 | .0091-.0161 | |
K | 1 | 260 | 430 | 560 | IPR | .0043-.0087 | .0047-.0094 | .0063-.0122 | .0079-.0150 | .0091-.0173 | .0098-.0193 | .0122-.0024 | .0150-.0185 |
2 | 300 | 360 | 390 | IPR | .0039–.0067 | .0047–.0075 | .0063–.0098 | .0079–.0122 | .0091–.0142 | .0098–.0157 | .0122–.0189 | .0150–.0236 | |
3 | 260 | 360 | 430 | IPR | .0028-.0059 | .0035-.0075 | .0047-.0098 | .0055-.0118 | .0067-.0138 | .0075-.0157 | .0098-.0189 | .0118-.0236 | |
H | 1 | 70 | 110 | 150 | IPR | .0012-.0024 | .0016-.0031 | .0024-.0039 | .0031-.0047 | .0035-.0051 | .0039-.0055 | .0047-.0063 | .0055-.0071 |
2 | 50 | 100 | 150 | IPR | .0008–.0016 | .0012–.0024 | .0020–.0031 | .0028–.0039 | .0031–.0043 | .0035–.0047 | .0039–.0055 | .0043–.0063 | |
3 | 50 | 80 | 130 | IPR | .0008-.0016 | .0008-.0020 | .0016-.0028 | .0024-.0035 | .0028-.0039 | .0031-.0043 | .0035-.0051 | .0039-.0059 | |
4 | 50 | 70 | 110 | IPR | .0008–.0016 | .0012–.0024 | .0020–.0031 | .0028–.0039 | .0031–.0043 | .0035–.0047 | .0039–.0055 | .0043–.0063 |
<="" td=""> | <="" td="" /> | ||||||||||||
Cutting Speed
|
Metric | ||||||||||||
Range
|
Recommended Feed Rate per Rev | ||||||||||||
Material
|
Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
P | 4 | 50 | 70 | 100 | mm/r | 0,06–0,15 | 0,08–0,17 | 0,12–0,23 | 0,14–0,28 | 0,17–0,33 | 0,19–0,38 | 0,23–0,47 | 0,29–0,59 |
5 | 50 | 60 | 80 | mm/r | 0,08–0,14 | 0,10–0,16 | 0,12–0,20 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 | |
6 | 40 | 50 | 70 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,08–0,14 | 0,10–0,18 | 0,13–0,22 | 0,14–0,24 | 0,18–0,32 | 0,23–0,41 | |
K | 1 | 80 | 130 | 170 | mm/r | 0,11–0,22 | 0,12–0,24 | 0,16–0,31 | 0,20–0,38 | 0,23–0,44 | 0,25–0,49 | 0,31–0,06 | 0,38–0,47 |
2 | 90 | 110 | 120 | mm/r | 0,10–0,17 | 0,12–0,19 | 0,16–0,25 | 0,20–0,31 | 0,23–0,36 | 0,25–0,40 | 0,31–0,48 | 0,38–0,60 | |
3 | 80 | 110 | 130 | mm/r | 0,07–0,15 | 0,09–0,19 | 0,12–0,25 | 0,14–0,30 | 0,17–0,35 | 0,19–0,40 | 0,25–0,48 | 0,30–0,60 | |
H | 1 | 20 | 35 | 45 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,06–0,10 | 0,08–0,12 | 0,09–0,13 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 |
2 | 15 | 30 | 45 | mm/r | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 | |
3 | 15 | 25 | 40 | mm/r | 0,02–0,04 | 0,02–0,05 | 0,04–0,07 | 0,06–0,09 | 0,07–0,10 | 0,08–0,11 | 0,09–0,13 | 0,10–0,15 | |
4 | 15 | 20 | 35 | mm/r | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 |