Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

Kennametal do usług

Obsługa klienta

Znajdź centrum obsługi klienta na całym świecie.

Szybkie zamówienie
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk
Frezuj więcej za mniej dzięki naszym ofertom ograniczonym czasowo! Kup teraz.

KSRM™ • Daisy Series

Wybierz filtry
Filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (146)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (137)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (137)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (137)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (137)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (137)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (146)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (146)
  • M Stainless Steel (146)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (146)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (146)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (146)
  • K Cast Iron (103)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (103)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (103)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (103)
  • N Non-Ferrous Materials (30)
    • N1
      Wrought Aluminum (30)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (30)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (30)
  • S High-Temp Alloys (145)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (132)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (132)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (132)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (145)
  • H Hardened Materials (85)
    • H1
      Hardened Materials 44-48 HRC (85)
Applications
Applications
  • Face Milling Face Milling (84)
  • Pocket Pocket (84)
  • Pocket Helical Pocket Helical (84)
  • Pocket Milling Pocket Milling (84)
  • Pocket Plunge Milling Pocket Plunge Milling (11)
  • Profile Milling Profile Milling (84)
  • Ramping Ramping (84)
  • Shoulder Ball Nose Shoulder Ball Nose (72)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (1)
  • Shoulder Milling Shoulder Milling (84)
  • Shoulder Roughing Shoulder Roughing (12)
  • Slot Milling Slot Milling (67)
Cutting Diameter
Cutting Diameter
  • 0.75 in (3)
  • 0.778 in (3)
  • 0.787 in (3)
  • 0.87 in (3)
  • 0.906 in (1)
  • 0.946 in (2)
  • 1.0 in (3)
  • 1.028 in (3)
  • 1.102 in (2)
  • 1.181 in (1)
  • 1.25 in (2)
  • 1.339 in (1)
  • 1.37 in (2)
  • 1.417 in (1)
  • 1.496 in (2)
  • 1.5 in (1)
  • 1.528 in (1)
  • 1.575 in (1)
  • 1.697 in (1)
  • 1.75 in (1)
  • 1.85 in (2)
  • 1.87 in (1)
  • 2.0 in (2)
  • 2.008 in (2)
  • 2.028 in (1)
  • 2.126 in (1)
  • 2.25 in (1)
  • 2.366 in (1)
  • 2.37 in (2)
  • 2.5 in (2)
  • 2.52 in (2)
  • 2.528 in (2)
  • 2.677 in (2)
  • 3.0 in (1)
  • 3.154 in (1)
  • 3.25 in (2)
  • 3.307 in (2)
  • 3.37 in (1)
  • 3.465 in (2)
  • 3.528 in (2)
  • 4.0 in (1)
  • 4.138 in (1)
  • 4.25 in (2)
  • 4.291 in (1)
  • 5.0 in (1)
  • 5.25 in (2)
  • 5.37 in (1)
  • 5.516 in (2)
  • 7.0 in (1)
  • 7.008 in (1)
  • 7.09 in (1)
  • 7.25 in (1)
Cutting Diameter Min do Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 19.05 mm (3)
  • 19.75 mm (3)
  • 20.0 mm (3)
  • 22.1 mm (3)
  • 23.0 mm (1)
  • 24.0 mm (2)
  • 25.401 mm (3)
  • 26.1 mm (3)
  • 28.0 mm (2)
  • 30.0 mm (1)
  • 31.75 mm (2)
  • 34.0 mm (1)
  • 34.801 mm (2)
  • 36.0 mm (1)
  • 38.0 mm (2)
  • 38.1 mm (1)
  • 38.801 mm (1)
  • 40.0 mm (1)
  • 43.1 mm (1)
  • 44.45 mm (1)
  • 47.0 mm (2)
  • 47.5 mm (1)
  • 50.801 mm (2)
  • 51.0 mm (2)
  • 51.5 mm (1)
  • 54.0 mm (1)
  • 57.151 mm (1)
  • 60.1 mm (1)
  • 60.2 mm (2)
  • 63.5 mm (2)
  • 64.0 mm (2)
  • 64.2 mm (2)
  • 68.0 mm (2)
  • 76.2 mm (1)
  • 80.101 mm (1)
  • 82.551 mm (2)
  • 84.0 mm (2)
  • 85.601 mm (1)
  • 88.0 mm (2)
  • 89.601 mm (2)
  • 101.601 mm (1)
  • 105.101 mm (1)
  • 107.95 mm (2)
  • 109.0 mm (1)
  • 127.0 mm (1)
  • 133.35 mm (2)
  • 136.4 mm (1)
  • 140.1 mm (2)
  • 177.8 mm (1)
  • 178.0 mm (1)
  • 180.076 mm (1)
  • 184.15 mm (1)
Cutting Diameter Min do Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 31.75 mm (3)
  • 31.8 mm (3)
  • 32.0 mm (3)
  • 35.0 mm (1)
  • 38.1 mm (9)
  • 40.0 mm (4)
  • 42.0 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (6)
  • 52.0 mm (2)
  • 63.0 mm (5)
  • 63.5 mm (4)
  • 66.0 mm (1)
  • 76.2 mm (8)
  • 80.0 mm (5)
  • 100.0 mm (5)
  • 101.601 mm (6)
  • 125.0 mm (2)
  • 127.0 mm (3)
  • 152.4 mm (4)
  • 160.0 mm (2)
  • 200.0 mm (1)
  • 203.201 mm (3)
Maximum Cutting Diameter Min do Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 1.25 in (3)
  • 1.252 in (3)
  • 1.26 in (3)
  • 1.379 in (1)
  • 1.5 in (9)
  • 1.575 in (4)
  • 1.655 in (1)
  • 1.969 in (3)
  • 2.0 in (6)
  • 2.047 in (2)
  • 2.48 in (5)
  • 2.5 in (4)
  • 2.598 in (1)
  • 3.0 in (8)
  • 3.15 in (5)
  • 3.938 in (5)
  • 4.0 in (6)
  • 4.921 in (2)
  • 5.0 in (3)
  • 6.0 in (4)
  • 6.299 in (2)
  • 7.875 in (1)
  • 8.0 in (3)
Maximum Cutting Diameter Min do Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.0 mm (29)
  • 6.351 mm (10)
  • 8.0 mm (21)
  • 9.525 mm (11)
  • 10.0 mm (7)
  • 12.701 mm (6)
Cutting Length Min do Cutting Length Max
Cutting Length
Cutting Length
  • 0.237 in (29)
  • 0.25 in (10)
  • 0.315 in (21)
  • 0.375 in (11)
  • 0.394 in (7)
  • 0.5 in (6)
Cutting Length Min do Cutting Length Max
Reach
Reach
  • 1.5 in (10)
  • 1.575 in (10)
  • 1.772 in (3)
  • 1.969 in (23)
  • 2.0 in (21)
  • 2.48 in (6)
  • 2.5 in (11)
Reach Min do Reach Max
Reach
Reach
  • 38.1 mm (10)
  • 40.0 mm (10)
  • 45.0 mm (3)
  • 50.0 mm (23)
  • 50.801 mm (21)
  • 63.0 mm (6)
  • 63.5 mm (11)
Reach Min do Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (84)
Tool Cutting Edge Angle Min do Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (50)
  • B-Cutter Retention Screw (5)
  • C-Bolt Circle (4)
  • SHCS or RetScrw Or BoltCircle (2)
  • Screw-On Connection (8)
  • Straight-Cylindrical (10)
  • Weldon (5)
Number of Flutes
Number of Flutes
  • 10 (1)
  • 2 (3)
  • 3 (16)
  • 4 (16)
  • 5 (13)
  • 6 (11)
  • 7 (10)
  • 8 (9)
  • 9 (5)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.575 in (5)
  • 1.969 in (22)
  • 2.0 in (17)
  • 2.465 in (3)
  • 2.48 in (6)
  • 2.5 in (11)
  • 2.736 in (3)
  • 3.976 in (1)
  • 4.28 in (3)
  • 4.69 in (1)
  • 6.0 in (2)
  • 7.0 in (1)
  • 7.48 in (1)
  • 7.875 in (2)
  • 8.0 in (2)
  • 10.0 in (2)
Over All Length [L] Min do Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (5)
  • 50.0 mm (22)
  • 50.801 mm (17)
  • 62.6 mm (3)
  • 63.0 mm (6)
  • 63.5 mm (11)
  • 69.5 mm (3)
  • 101.0 mm (1)
  • 108.7 mm (3)
  • 119.125 mm (1)
  • 152.4 mm (2)
  • 177.8 mm (1)
  • 190.0 mm (1)
  • 200.0 mm (2)
  • 203.201 mm (2)
  • 254.0 mm (2)
Over All Length [L] Min do Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.237 in (46)
  • 0.25 in (15)
  • 0.315 in (31)
  • 0.375 in (22)
  • 0.394 in (17)
  • 0.5 in (16)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 6.0 mm (46)
  • 6.351 mm (15)
  • 8.0 mm (31)
  • 9.525 mm (22)
  • 10.0 mm (17)
  • 12.701 mm (16)
Corner Radius Min do Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC422M (61)
  • KC522M (89)
  • KC715M (17)
  • KC725M (104)
  • KCMP30 (30)
  • KCPK30 (97)
  • KCPM20 (51)
  • KCPM40 (82)
  • KCSM30 (89)
  • KCSM40 (54)
Hand Of Tool
Hand Of Tool
  • R (84)
Wiper Insert
Wiper Insert
  • N (63)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.41 (1)
  • 0.49 (1)
  • 0.5 (1)
  • 0.56 (2)
  • 0.59 (2)
  • 0.63 (1)
  • 0.64 (1)
  • 0.67 (2)
  • 0.68 (1)
  • 0.69 (1)
  • 0.7 (1)
  • 0.73 (2)
  • 0.75 (1)
  • 0.78 (1)
  • 0.79 (1)
  • 0.8 (2)
  • 0.83 (1)
  • 0.89 (2)
  • 2.6 (1)
  • 3.0 (1)
  • 3.06 (1)
  • 3.3 (1)
  • 3.4 (1)
  • 3.5 (1)
  • 4.0 (1)
  • 4.1 (2)
  • 4.3 (2)
  • 4.5 (1)
  • 4.6 (1)
  • 4.7 (1)
  • 4.74 (3)
  • 5.1 (1)
  • 5.3 (2)
  • 5.7 (4)
  • 5.95 (1)
  • 6.0 (3)
  • 6.1 (1)
  • 6.35 (2)
  • 6.6 (1)
  • 6.8 (1)
  • 7.0 (1)
  • 7.7 (2)
  • 7.87 (1)
  • 8.16 (1)
  • 8.2 (1)
  • 8.383 (1)
  • 8.8 (1)
  • 8.97 (2)
  • 9.2 (2)
  • 9.25 (1)
  • 9.7 (1)
  • 9.8 (1)
  • 9.867 (1)
  • 9.9 (1)
  • 9.983 (1)
  • 10.2 (1)
  • 10.68 (1)
  • 10.8 (1)
  • 11.08 (1)
  • 11.1 (1)
  • 11.43 (1)
  • 11.7 (1)
  • 11.73 (1)
  • 11.8 (1)
Maximum Ramp Angle Min do Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 1.24 in (1)
  • 1.625 in (2)
Neck Diameter Min do Neck Diameter Max
Neck Diameter
Neck Diameter
  • 31.5 mm (1)
  • 41.276 mm (2)
Neck Diameter Min do Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • R-ROUND (63)
Insert IC Size
Insert IC Size
  • 12.0 mm (17)
  • 12.701 mm (5)
  • 16.0 mm (10)
  • 19.05 mm (11)
  • 20.0 mm (10)
  • 25.401 mm (10)
Insert IC Size Min do Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.473 in (17)
  • 0.5 in (5)
  • 0.63 in (10)
  • 0.75 in (11)
  • 0.787 in (10)
  • 1.0 in (10)
Insert IC Size Min do Insert IC Size Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GDX (3)
  • GE (14)
  • GF (10)
  • GP (4)
  • HF (12)
  • HP (3)
  • LE (8)
  • LF (9)
Cutting Tool Material
Cutting Tool Material
  • H W (63)
Tolerance Class
Tolerance Class
  • E (18)
  • G (31)
  • P (14)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (15)
  • SCREW-ON (8)
  • SHELL MILL (61)
Back-End Diameter
Back-End Diameter
  • 12.701 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (5)
  • 19.1 mm (2)
  • 22.0 mm (10)
  • 25.401 mm (9)
  • 27.0 mm (6)
  • 29.0 mm (8)
  • 31.75 mm (16)
  • 32.0 mm (9)
  • 38.1 mm (8)
  • 40.0 mm (4)
  • 60.0 mm (1)
  • 63.5 mm (3)
Back-End Diameter Min do Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.5 in (1)
  • 0.63 in (2)
  • 0.75 in (5)
  • 0.752 in (2)
  • 0.866 in (10)
  • 1.0 in (9)
  • 1.063 in (6)
  • 1.143 in (8)
  • 1.25 in (16)
  • 1.26 in (9)
  • 1.5 in (8)
  • 1.575 in (4)
  • 2.362 in (1)
  • 2.5 in (3)
Back-End Diameter Min do Back-End Diameter Max
No filters matching ""

KSRM™ • Daisy IC12

(54) KSRM™ • Daisy IC12

KSRM™ • Daisy IC20

(40) KSRM™ • Daisy IC20

KSRM™ • Daisy IC16

(31) KSRM™ • Daisy IC16

KSRM™ • Daisy IC 3/4

(20) KSRM™ • Daisy IC 3/4

KSRM™ • Daisy IC 1.0

(16) KSRM™ • Daisy IC 1.0

KSRM™ • Daisy IC 1/2

(15) KSRM™ • Daisy IC 1/2
Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

Models

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka
Wyświetl koszyk

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Dziękujemy za pomyślną rejestrację. Możesz teraz zalogować się i korzystać z witryny

You are about to leave the Solution building process.

Are you sure you want to leave?