Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

Kennametal do usług

Obsługa klienta

Znajdź centrum obsługi klienta na całym świecie.

Szybkie zamówienie
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk
Frezuj więcej za mniej dzięki naszym ofertom ograniczonym czasowo! Kup teraz.

Cutters Mill 1-10™ • Inch

Wybierz filtry
Filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (62)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (62)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (62)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (62)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (62)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (62)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (62)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (62)
  • M Stainless Steel (62)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (62)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (62)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (62)
  • K Cast Iron (62)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (62)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (62)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (62)
  • N Non-Ferrous Materials (62)
    • N1
      Wrought Aluminum (62)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (62)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (62)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (57)
  • S High-Temp Alloys (62)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (62)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (62)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (62)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (62)
  • H Hardened Materials (62)
    • H1
      Hardened Materials 44-48 HRC (62)
Select First Choice
  • US (42)
Applications
Applications
  • Face Milling Face Milling (62)
  • Pocket Pocket (62)
  • Pocket Helical Pocket Helical (62)
  • Pocket Milling Pocket Milling (62)
  • Ramping Ramping (62)
  • Shoulder Milling Shoulder Milling (62)
  • Shoulder Roughing Shoulder Roughing (62)
  • Shoulder Square End Shoulder Square End (62)
  • Slot Milling Slot Milling (36)
  • Slot Square End Slot Square End (36)
Cutting Diameter
Cutting Diameter
  • 0.5 in (1)
  • 0.625 in (5)
  • 0.75 in (11)
  • 0.875 in (1)
  • 1.0 in (16)
  • 1.1 in (1)
  • 1.25 in (13)
  • 1.5 in (5)
  • 2.0 in (4)
  • 2.5 in (2)
  • 3.0 in (2)
  • 4.0 in (1)
Cutting Diameter Min do Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.701 mm (1)
  • 15.875 mm (5)
  • 19.05 mm (11)
  • 22.225 mm (1)
  • 25.401 mm (16)
  • 27.951 mm (1)
  • 31.75 mm (13)
  • 38.1 mm (5)
  • 50.801 mm (4)
  • 63.5 mm (2)
  • 76.2 mm (2)
  • 101.601 mm (1)
Cutting Diameter Min do Cutting Diameter Max
Cutting Length
Cutting Length
  • 9.701 mm (1)
  • 9.75 mm (2)
  • 9.775 mm (1)
  • 9.826 mm (1)
  • 9.875 mm (7)
  • 9.9 mm (1)
  • 9.951 mm (10)
  • 10.0 mm (1)
  • 10.025 mm (12)
  • 10.05 mm (4)
  • 10.076 mm (1)
  • 10.101 mm (8)
  • 10.25 mm (1)
  • 18.675 mm (2)
  • 18.8 mm (1)
  • 18.925 mm (1)
  • 27.776 mm (1)
  • 36.0 mm (2)
  • 36.375 mm (1)
  • 44.325 mm (2)
  • 44.801 mm (2)
Cutting Length Min do Cutting Length Max
Cutting Length
Cutting Length
  • 0.382 in (1)
  • 0.384 in (2)
  • 0.385 in (1)
  • 0.387 in (1)
  • 0.389 in (7)
  • 0.39 in (1)
  • 0.392 in (10)
  • 0.394 in (1)
  • 0.395 in (12)
  • 0.396 in (4)
  • 0.397 in (1)
  • 0.398 in (8)
  • 0.404 in (1)
  • 0.735 in (2)
  • 0.74 in (1)
  • 0.745 in (1)
  • 1.094 in (1)
  • 1.417 in (2)
  • 1.432 in (1)
  • 1.745 in (2)
  • 1.764 in (2)
Cutting Length Min do Cutting Length Max
Reach
Reach
  • 0.8 in (1)
  • 0.987 in (1)
  • 0.999 in (1)
  • 1.0 in (3)
  • 1.053 in (2)
  • 1.1 in (6)
  • 1.239 in (1)
  • 1.25 in (13)
  • 1.393 in (1)
  • 1.5 in (3)
  • 1.575 in (6)
  • 1.589 in (2)
  • 1.6 in (7)
  • 1.614 in (2)
  • 1.75 in (2)
  • 1.79 in (1)
  • 1.889 in (1)
  • 1.901 in (2)
  • 2.0 in (3)
  • 2.091 in (2)
  • 2.4 in (2)
Reach Min do Reach Max
Reach
Reach
  • 20.326 mm (1)
  • 25.076 mm (1)
  • 25.375 mm (1)
  • 25.401 mm (3)
  • 26.75 mm (2)
  • 27.951 mm (6)
  • 31.475 mm (1)
  • 31.75 mm (13)
  • 35.35 mm (1)
  • 38.1 mm (3)
  • 40.0 mm (6)
  • 40.35 mm (2)
  • 40.651 mm (7)
  • 41.0 mm (2)
  • 44.45 mm (2)
  • 45.475 mm (1)
  • 47.975 mm (1)
  • 48.25 mm (2)
  • 50.801 mm (3)
  • 53.1 mm (2)
  • 60.95 mm (2)
Reach Min do Reach Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (13)
  • Screw-On Connection (10)
  • Straight-Cylindrical (26)
  • Weldon (13)
Number of Flutes
Number of Flutes
  • 1 (1)
  • 10 (1)
  • 2 (15)
  • 3 (17)
  • 4 (13)
  • 5 (8)
  • 6 (3)
  • 8 (3)
  • 9 (1)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (57)
  • 2.0 (62)
Cutting Edges Per Insert Min do Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 1.575 in (6)
  • 1.669 in (1)
  • 1.75 in (2)
  • 1.848 in (2)
  • 2.0 in (3)
  • 2.116 in (2)
  • 2.4 in (2)
  • 2.406 in (3)
  • 2.52 in (2)
  • 3.031 in (1)
  • 3.13 in (2)
  • 3.281 in (2)
  • 3.422 in (1)
  • 3.5 in (1)
  • 3.531 in (2)
  • 3.88 in (2)
  • 4.0 in (1)
  • 4.071 in (1)
  • 4.37 in (2)
  • 4.407 in (1)
  • 4.5 in (2)
  • 4.8 in (5)
  • 5.2 in (2)
  • 6.688 in (1)
  • 6.689 in (1)
  • 6.7 in (4)
  • 7.989 in (3)
  • 8.0 in (5)
Over All Length [L] Min do Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (6)
  • 42.401 mm (1)
  • 44.45 mm (2)
  • 46.95 mm (2)
  • 50.801 mm (3)
  • 53.75 mm (2)
  • 60.95 mm (2)
  • 61.1 mm (3)
  • 64.0 mm (2)
  • 76.95 mm (1)
  • 79.5 mm (2)
  • 83.325 mm (2)
  • 86.926 mm (1)
  • 88.9 mm (1)
  • 89.676 mm (2)
  • 98.551 mm (2)
  • 101.601 mm (1)
  • 103.4 mm (1)
  • 111.0 mm (2)
  • 111.926 mm (1)
  • 114.301 mm (2)
  • 121.926 mm (5)
  • 132.076 mm (2)
  • 169.875 mm (1)
  • 169.9 mm (1)
  • 170.175 mm (4)
  • 202.925 mm (3)
  • 203.201 mm (5)
Over All Length [L] Min do Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (57)
  • 0.016 in (57)
  • 0.031 in (57)
  • 0.039 in (57)
  • 0.047 in (57)
  • 0.063 in (57)
  • 0.079 in (57)
  • 0.094 in (57)
  • 0.122 in (62)
  • 0.157 in (62)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (57)
  • 0.4 mm (57)
  • 0.8 mm (57)
  • 1.0 mm (57)
  • 1.201 mm (57)
  • 1.6 mm (57)
  • 2.0 mm (57)
  • 2.375 mm (57)
  • 3.1 mm (62)
  • 4.0 mm (62)
Corner Radius Min do Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (62)
  • KC410M (62)
  • KC422M (62)
  • KC510M (57)
  • KC520M (62)
  • KC522M (62)
  • KC725M (62)
  • KCK15 (57)
  • KCK20B (57)
  • KCKP10 (57)
  • KCPK30 (62)
  • KCPM20 (62)
  • KCPM40 (62)
  • KCSM30 (62)
  • KCSM40 (62)
  • KD1410 (57)
Hand Of Tool
Hand Of Tool
  • R (61)
  • R - Right Hand Helix/Flute (1)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.5 (1)
  • 0.75 (2)
  • 1.0 (2)
  • 1.5 (4)
  • 2.0 (6)
  • 2.5 (12)
  • 3.0 (2)
  • 3.25 (1)
  • 4.0 (14)
  • 5.0 (1)
  • 5.25 (1)
  • 6.5 (10)
  • 8.0 (1)
  • 9.5 (4)
  • 11.5 (1)
Maximum Ramp Angle Min do Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • E-PARALLELOGRAM 70 (62)
  • X-PARALLELOGRAM 70 (62)
  • X-PARALLELOGRAM 75 (62)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (39)
  • SCREW-ON (10)
  • SHELL MILL (13)
Back-End Diameter
Back-End Diameter
  • 13.0 mm (1)
  • 15.875 mm (3)
  • 18.0 mm (2)
  • 19.0 mm (5)
  • 19.05 mm (21)
  • 21.0 mm (2)
  • 25.401 mm (13)
  • 29.0 mm (5)
  • 31.75 mm (9)
  • 38.1 mm (1)
Back-End Diameter Min do Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.512 in (1)
  • 0.625 in (3)
  • 0.709 in (2)
  • 0.748 in (5)
  • 0.75 in (21)
  • 0.828 in (2)
  • 1.0 in (13)
  • 1.143 in (5)
  • 1.25 in (9)
  • 1.5 in (1)
Back-End Diameter Min do Back-End Diameter Max
No filters matching ""

Mill 1-10™ • End Mill • Cylindrical Shank • Inch

(10) Mill 1-10™ • End Mill • Cylindrical Shank • Inch

Mill 1-10™ • Helical Shell Mill • Inch

(4) Mill 1-10™ • Helical Shell Mill • Inch

Mill 1-10™ • Helical End Mill • Cylindrical Shank • Inch

(2) Mill 1-10™ • Helical End Mill • Cylindrical Shank • Inch

Mill 1-10™ • Helical End Mill • Weldon Shank • Inch

(4) Mill 1-10™ • Helical End Mill • Weldon Shank • Inch

Mill 1-10™ • Shell Mill • Inch

(9) Mill 1-10™ • Shell Mill • Inch

Mill 1-10™ • End Mill • Long • Cylindrical Shank • For Corner Radius .122" (3.1mm) • Inch

(5) Mill 1-10™ • End Mill • Long • Cylindrical Shank • For Corner Radius .122" (3.1mm) • Inch

Mill 1-10™ • End Mill • Weldon Shank • Inch

(9) Mill 1-10™ • End Mill • Weldon Shank • Inch

Mill 1-10™ • End Mill • Screw-On • Inch

(8) Mill 1-10™ • End Mill • Screw-On • Inch

Mill 1-10™ • End Mill • Long • Cylindrical Shank • Inch

(9) Mill 1-10™ • End Mill • Long • Cylindrical Shank • Inch

Mill 1-10™ • Helical End Mill • Screw-On • Inch

(2) Mill 1-10™ • Helical End Mill • Screw-On • Inch
Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

Models

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka
Wyświetl koszyk

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Dziękujemy za pomyślną rejestrację. Możesz teraz zalogować się i korzystać z witryny

You are about to leave the Solution building process.

Are you sure you want to leave?