Frezy trzpieniowe dla wysokowydajnego frezowania dynamicznego

Zaprojektowany do frezowania dynamicznego z niskim zaangażowaniem promieniowym i pełną głębokością skrawania.

Optymalizuje możliwości obrabiarek 5-osiowych z wykorzystaniem oprogramowania do tworzenia ścieżek narzędzia CAM.

Bardzo szybka obróbka zgrubna aluminium KOR5 DA

  • Chłodziwo wewnętrzne pomaga wypłukiwać wióry ze strefy skrawania oraz zmniejszać ciepło.
  • 5 krawędzi skrawających zapewnia większe posuwy i większą wydajność obróbki.
  • Łamacze wióra zapewniają skuteczne usuwanie wiórów.
  • Opatentowany kształt rowków zapewnia przepływ chłodziwa, odprowadzanie wiórów i maksymalną głębokość skrawania wynoszącą 3xD.
  • Nawet 66% większy posuw stołu w przypadku zastosowań związanych z obróbką aluminium.
  • Chwyt Safe-Lock™ zapobiega wyciągnięciu freza trzpieniowego.
Wybierz filtry
Filters
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (48)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (48)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (48)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (48)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (48)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (48)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (48)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (48)
  • M Stainless Steel (48)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (48)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (48)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (48)
  • K Cast Iron (48)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (48)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (48)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (48)
  • N Non-Ferrous Materials (120)
    • N1
      Wrought Aluminum (120)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (120)
  • S High-Temp Alloys (48)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (48)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (48)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (48)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (48)
  • H Hardened Materials (48)
    • H1
      Hardened Materials 44-48 HRC (48)
    • H2
      Hardened Materials 48-55 HRC (48)
Applications
Applications
  • Pocket Pocket (40)
  • Pocket Helical Pocket Helical (168)
  • Pocket Milling Pocket Milling (168)
  • Ramping Ramping (80)
  • Shoulder Milling Shoulder Milling (168)
  • Shoulder Roughing Shoulder Roughing (99)
  • Shoulder Square End Shoulder Square End (168)
  • Trochoidal Milling Trochoidal Milling (147)
Cutting Diameter
Cutting Diameter
  • 0.25 in (4)
  • 0.315 in (4)
  • 0.375 in (16)
  • 0.394 in (16)
  • 0.473 in (19)
  • 0.5 in (16)
  • 0.625 in (16)
  • 0.63 in (16)
  • 0.75 in (19)
  • 0.787 in (13)
  • 0.984 in (13)
  • 1.0 in (16)
Cutting Diameter Min do Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 6.351 mm (4)
  • 8.0 mm (4)
  • 9.525 mm (16)
  • 10.0 mm (16)
  • 12.0 mm (19)
  • 12.701 mm (16)
  • 15.875 mm (16)
  • 16.0 mm (16)
  • 19.05 mm (19)
  • 20.0 mm (13)
  • 25.0 mm (13)
  • 25.401 mm (16)
Cutting Diameter Min do Cutting Diameter Max
Cutting Length
Cutting Length
  • 19.05 mm (2)
  • 24.0 mm (2)
  • 28.576 mm (10)
  • 30.0 mm (10)
  • 31.75 mm (2)
  • 36.0 mm (12)
  • 38.1 mm (10)
  • 40.0 mm (2)
  • 47.625 mm (16)
  • 48.0 mm (10)
  • 50.0 mm (6)
  • 57.151 mm (12)
  • 60.0 mm (15)
  • 63.5 mm (6)
  • 75.0 mm (8)
  • 76.2 mm (10)
  • 79.375 mm (6)
  • 80.0 mm (6)
  • 95.25 mm (7)
  • 100.0 mm (5)
  • 125.0 mm (5)
  • 127.0 mm (6)
Cutting Length Min do Cutting Length Max
Cutting Length
Cutting Length
  • 0.75 in (2)
  • 0.946 in (2)
  • 1.125 in (10)
  • 1.181 in (10)
  • 1.25 in (2)
  • 1.417 in (12)
  • 1.5 in (10)
  • 1.575 in (2)
  • 1.875 in (16)
  • 1.891 in (10)
  • 1.969 in (6)
  • 2.25 in (12)
  • 2.362 in (15)
  • 2.5 in (6)
  • 2.953 in (8)
  • 3.0 in (10)
  • 3.125 in (6)
  • 3.15 in (6)
  • 3.75 in (7)
  • 3.938 in (5)
  • 4.921 in (5)
  • 5.0 in (6)
Cutting Length Min do Cutting Length Max
Reach
Reach
  • 1.407 in (3)
  • 1.457 in (4)
  • 1.728 in (4)
  • 1.824 in (3)
  • 2.255 in (2)
  • 2.273 in (4)
  • 2.815 in (3)
  • 2.953 in (3)
  • 3.494 in (3)
  • 3.548 in (3)
Reach Min do Reach Max
Reach
Reach
  • 35.7 mm (3)
  • 37.0 mm (4)
  • 43.901 mm (4)
  • 46.325 mm (3)
  • 57.276 mm (2)
  • 57.7 mm (4)
  • 71.5 mm (3)
  • 75.0 mm (3)
  • 88.75 mm (3)
  • 90.125 mm (3)
Reach Min do Reach Max
Connection Style
Connection Style
  • SAFE-LOCK (96)
  • Straight-Cylindrical (48)
  • Weldon (24)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 2.5 in (2)
  • 2.638 in (2)
  • 2.953 in (8)
  • 3.0 in (12)
  • 3.15 in (2)
  • 3.426 in (12)
  • 3.5 in (10)
  • 3.938 in (8)
  • 4.0 in (16)
  • 4.094 in (8)
  • 4.331 in (2)
  • 4.5 in (4)
  • 4.529 in (5)
  • 4.724 in (6)
  • 4.921 in (4)
  • 5.0 in (14)
  • 5.5 in (12)
  • 5.551 in (6)
  • 5.67 in (6)
  • 5.906 in (2)
  • 6.0 in (4)
  • 6.25 in (5)
  • 6.535 in (3)
  • 6.694 in (2)
  • 7.0 in (2)
  • 7.5 in (2)
  • 7.875 in (5)
  • 8.0 in (4)
Over All Length [L] Min do Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 63.5 mm (2)
  • 67.0 mm (2)
  • 75.0 mm (8)
  • 76.2 mm (12)
  • 80.0 mm (2)
  • 87.0 mm (12)
  • 88.9 mm (10)
  • 100.0 mm (8)
  • 101.601 mm (16)
  • 104.0 mm (8)
  • 110.0 mm (2)
  • 114.301 mm (4)
  • 115.0 mm (5)
  • 120.0 mm (6)
  • 125.0 mm (4)
  • 127.0 mm (14)
  • 139.701 mm (12)
  • 141.0 mm (6)
  • 144.0 mm (6)
  • 150.0 mm (2)
  • 152.4 mm (4)
  • 158.75 mm (5)
  • 166.0 mm (3)
  • 170.0 mm (2)
  • 177.8 mm (2)
  • 190.5 mm (2)
  • 200.0 mm (5)
  • 203.201 mm (4)
Over All Length [L] Min do Over All Length [L] Max
cornerConfiguration
Corner Style
Corner Style
  • RADIUS (138)
  • SQUARE END (30)
Corner Radius
Corner Radius
  • 0.0 in (30)
  • 0.008 in (6)
  • 0.015 in (6)
  • 0.02 in (23)
  • 0.03 in (35)
  • 0.039 in (15)
  • 0.06 in (26)
  • 0.079 in (3)
  • 0.09 in (9)
  • 0.098 in (12)
  • 0.12 in (3)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (30)
  • 0.2 mm (6)
  • 0.375 mm (6)
  • 0.5 mm (23)
  • 0.75 mm (35)
  • 1.0 mm (15)
  • 1.5 mm (3)
  • 1.526 mm (23)
  • 2.0 mm (3)
  • 2.275 mm (9)
  • 2.5 mm (12)
  • 3.051 mm (3)
Corner Radius Min do Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K600 (120)
  • KC643M (48)
Rough Finish
Rough Finish
  • FBS (156)
  • F (12)
Maximum Ramp Angle
Maximum Ramp Angle
  • 4.0 (38)
  • 5.0 (12)
Maximum Ramp Angle Min do Maximum Ramp Angle Max
frontEnd
Center Cutting
Center Cutting
backEnd
Back-End Diameter
Back-End Diameter
  • 6.351 mm (4)
  • 8.0 mm (4)
  • 9.525 mm (16)
  • 10.0 mm (16)
  • 12.0 mm (19)
  • 12.701 mm (16)
  • 15.875 mm (16)
  • 16.0 mm (16)
  • 19.05 mm (19)
  • 20.0 mm (13)
  • 25.0 mm (13)
  • 25.401 mm (16)
Back-End Diameter Min do Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.25 in (4)
  • 0.315 in (4)
  • 0.375 in (16)
  • 0.394 in (16)
  • 0.473 in (19)
  • 0.5 in (16)
  • 0.625 in (16)
  • 0.63 in (16)
  • 0.75 in (19)
  • 0.787 in (13)
  • 0.984 in (13)
  • 1.0 in (16)
Back-End Diameter Min do Back-End Diameter Max
No filters matching ""
Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?