Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

Kennametal do usług

Obsługa klienta

Znajdź centrum obsługi klienta na całym świecie.

Szybkie zamówienie
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk
Frezuj więcej za mniej dzięki naszym ofertom ograniczonym czasowo! Kup teraz.

Oprawki do toczenia gwintów LT

Wybierz filtry
Filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (67)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (67)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (67)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (67)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (67)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (67)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (67)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (67)
  • M Stainless Steel (67)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (67)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (67)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (67)
  • K Cast Iron (67)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (67)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (67)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (67)
  • N Non-Ferrous Materials (12)
    • N1
      Wrought Aluminum (12)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (12)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (12)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (12)
    • N6
      Carbon, Graphite Composites, CFRP (12)
  • S High-Temp Alloys (67)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (67)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (67)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (67)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (67)
  • H Hardened Materials (12)
    • H1
      Hardened Materials 44-48 HRC (12)
Select First Choice
  • DE (3)
  • GB (3)
  • SG (2)
Applications
Applications
  • OD Thread Turning OD Thread Turning (67)
  • Threading Threading (67)
Type of Thread
Type of Thread
  • 55 (67)
  • 60 (67)
  • ACME (67)
  • API (20)
  • API BUTTRESS (20)
  • API RD (47)
  • BSPT (47)
  • BSW (67)
  • M (67)
  • NPT (47)
  • NPTF (47)
  • RD DIN 405 (67)
  • STUB ACME (67)
  • TR DIN 103 (67)
  • UN (47)
  • UNJ (47)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 3.25 in (2)
  • 3.346 in (2)
  • 3.938 in (4)
  • 4.921 in (5)
  • 5.0 in (10)
  • 5.906 in (11)
  • 5.984 in (2)
  • 6.0 in (13)
  • 6.024 in (1)
  • 6.063 in (2)
  • 6.102 in (3)
  • 6.694 in (5)
  • 6.891 in (4)
  • 7.0 in (1)
  • 7.008 in (2)
Over All Length [L] Min do Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 82.551 mm (2)
  • 85.0 mm (2)
  • 100.0 mm (4)
  • 125.0 mm (5)
  • 127.0 mm (10)
  • 150.0 mm (11)
  • 152.0 mm (2)
  • 152.4 mm (13)
  • 153.0 mm (1)
  • 154.0 mm (2)
  • 155.0 mm (3)
  • 170.0 mm (5)
  • 175.0 mm (4)
  • 177.8 mm (1)
  • 178.0 mm (2)
Over All Length [L] Min do Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (47)
  • 0.003 in (47)
  • 0.004 in (28)
  • 0.005 in (28)
  • 0.006 in (28)
  • 0.007 in (28)
  • 0.008 in (47)
  • 0.01 in (28)
  • 0.011 in (47)
  • 0.014 in (28)
  • 0.015 in (28)
  • 0.017 in (20)
  • 0.021 in (20)
  • 0.03 in (28)
  • 0.039 in (12)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (47)
  • 0.076 mm (47)
  • 0.1 mm (28)
  • 0.125 mm (28)
  • 0.151 mm (28)
  • 0.176 mm (28)
  • 0.2 mm (47)
  • 0.225 mm (28)
  • 0.275 mm (47)
  • 0.325 mm (28)
  • 0.375 mm (28)
  • 0.426 mm (20)
  • 0.525 mm (20)
  • 0.75 mm (28)
  • 1.0 mm (12)
Corner Radius Min do Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K00331 (28)
  • K68 (28)
  • KC5010 (59)
  • KC5025 (67)
  • KC710 (40)
  • KC720 (59)
  • KC722 (28)
  • KC730 (59)
  • KU25T (28)
Hand Of Tool
Hand Of Tool
  • L (27)
  • R (40)
F Dimension
F Dimension
  • 12.701 mm (2)
  • 15.875 mm (1)
  • 16.0 mm (8)
  • 19.05 mm (4)
  • 20.0 mm (4)
  • 25.0 mm (11)
  • 25.401 mm (11)
  • 31.75 mm (8)
  • 32.0 mm (13)
  • 38.1 mm (2)
  • 40.0 mm (3)
F Dimension Min do F Dimension Max
F Dimension
F Dimension
  • 0.5 in (2)
  • 0.625 in (1)
  • 0.63 in (8)
  • 0.75 in (4)
  • 0.787 in (4)
  • 0.984 in (11)
  • 1.0 in (11)
  • 1.25 in (8)
  • 1.26 in (13)
  • 1.5 in (2)
  • 1.575 in (3)
F Dimension Min do F Dimension Max
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (46)
  • NEGATIVE-ZERO (21)
frontEnd
Clamp Style
Clamp Style
  • C (44)
  • S (2)
  • Y (21)
backEnd
Shank Height
Shank Height
  • 0.473 in (2)
  • 0.5 in (2)
  • 0.625 in (3)
  • 0.63 in (4)
  • 0.75 in (7)
  • 0.787 in (7)
  • 0.984 in (15)
  • 1.0 in (13)
  • 1.25 in (5)
  • 1.26 in (9)
Shank Height Min do Shank Height Max
Shank Height
Shank Height
  • 12.0 mm (2)
  • 12.701 mm (2)
  • 15.875 mm (3)
  • 16.0 mm (4)
  • 19.05 mm (7)
  • 20.0 mm (7)
  • 25.0 mm (15)
  • 25.401 mm (13)
  • 31.75 mm (5)
  • 32.0 mm (9)
Shank Height Min do Shank Height Max
Shank Width
Shank Width
  • 0.473 in (2)
  • 0.5 in (2)
  • 0.625 in (3)
  • 0.63 in (4)
  • 0.75 in (7)
  • 0.787 in (8)
  • 0.984 in (14)
  • 1.0 in (13)
  • 1.25 in (5)
  • 1.26 in (9)
Shank Width Min do Shank Width Max
Shank Width
Shank Width
  • 12.0 mm (2)
  • 12.701 mm (2)
  • 15.875 mm (3)
  • 16.0 mm (4)
  • 19.05 mm (7)
  • 20.0 mm (8)
  • 25.0 mm (14)
  • 25.401 mm (13)
  • 31.75 mm (5)
  • 32.0 mm (9)
Shank Width Min do Shank Width Max
No filters matching ""

LSA

(12) LSA

Laydown Threading • Through Coolant • LSA-C • Inch

(9) Laydown Threading • Through Coolant • LSA-C • Inch

Toczenie gwintów narzędziami Laydown • Wewnętrzne doprowadzanie chłodziwa • LSA-C • Metryczne

(12) Toczenie gwintów narzędziami Laydown • Wewnętrzne doprowadzanie chłodziwa • LSA-C • Metryczne

LSS-DH

(2) LSS-DH

LSS-DH

(4) LSS-DH

LSS

(8) LSS

LSS

(9) LSS

LSA

(11) LSA
Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

Models

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka
Wyświetl koszyk

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Dziękujemy za pomyślną rejestrację. Możesz teraz zalogować się i korzystać z witryny

You are about to leave the Solution building process.

Are you sure you want to leave?