Tuleje do oprawek frezarskich SMC

Wybierz filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
application
Bore Diameter [D1]
Bore Diameter [D1]
  • 3.176 mm (3)
  • 4.775 mm (3)
  • 6.0 mm (5)
  • 6.351 mm (3)
  • 7.95 mm (3)
  • 8.0 mm (4)
  • 9.525 mm (3)
  • 10.0 mm (5)
  • 11.125 mm (3)
  • 12.0 mm (4)
  • 12.701 mm (3)
  • 14.0 mm (2)
  • 14.3 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (5)
  • 18.0 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (3)
  • 22.0 mm (1)
  • 22.225 mm (2)
  • 25.0 mm (2)
  • 25.401 mm (1)
Bore Diameter [D1] Min do Bore Diameter [D1] Max
Bore Diameter [D1]
Bore Diameter [D1]
  • 0.125 in (3)
  • 0.188 in (3)
  • 0.237 in (5)
  • 0.25 in (3)
  • 0.313 in (3)
  • 0.315 in (4)
  • 0.375 in (3)
  • 0.394 in (5)
  • 0.438 in (3)
  • 0.473 in (4)
  • 0.5 in (3)
  • 0.551 in (2)
  • 0.564 in (3)
  • 0.625 in (3)
  • 0.63 in (5)
  • 0.709 in (1)
  • 0.75 in (2)
  • 0.787 in (3)
  • 0.866 in (1)
  • 0.875 in (2)
  • 0.984 in (2)
  • 1.0 in (1)
Bore Diameter [D1] Min do Bore Diameter [D1] Max
backEnd
Back-End Diameter
Back-End Diameter
  • 19.05 mm (15)
  • 20.0 mm (5)
  • 25.401 mm (15)
  • 31.75 mm (22)
  • 32.0 mm (7)
Back-End Diameter Min do Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (15)
  • 0.787 in (5)
  • 1.0 in (15)
  • 1.25 in (22)
  • 1.26 in (7)
Back-End Diameter Min do Back-End Diameter Max
No filters matching ""
Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

Models

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Dziękujemy za pomyślną rejestrację. Możesz teraz zalogować się i korzystać z witryny

You are about to leave the Solution building process.

Are you sure you want to leave?