Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read

Systemy KM™

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1348)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1344)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1344)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1344)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1344)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1344)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1348)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1348)
  • M Stainless Steel (1348)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1348)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1348)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1348)
  • K Cast Iron (1370)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1370)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1370)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1368)
  • N Non-Ferrous Materials (1306)
    • N1
      Wrought Aluminum
      (1290)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1286)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (877)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1292)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1278)
    • N6
      Carbon, Graphite Composites, CFRP
      (1196)
    • N7
      MMC's
      (1219)
  • S High-Temp Alloys (1369)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1367)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1369)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1367)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1342)
  • H Hardened Materials (1206)
    • H1
      Hardened Materials 44-48 HRC
      (1206)
    • H2
      Hardened Materials 48-55 HRC
      (1124)
    • H3
      Hardened Materials 56-60 HRC
      (1029)
    • H4
      Hardened Materials >60 HRC
      (982)
Applications
Applications
  • Chamfer Turning Chamfer Turning (44)
  • Convex Drilling Convex Drilling (7)
  • Cut-Off Cut-Off (41)
  • Deep Grooving Deep Grooving (41)
  • Drilling Drilling (7)
  • Face Grooving Face Grooving (41)
  • Facing Facing (755)
  • Grooving Grooving (163)
  • ID Facing ID Facing (6)
  • ID Grooving ID Grooving (74)
  • ID Thread Turning ID Thread Turning (128)
  • Inclined Entry Drilling Inclined Entry Drilling (7)
  • Inclined Exit Drilling Inclined Exit Drilling (7)
  • Multiple Direction Cutting Multiple Direction Cutting (902)
  • OD Thread Turning OD Thread Turning (158)
  • Plunge Turning Plunge Turning (50)
  • Profiling Profiling (747)
  • TRN Boring TRN Boring (715)
  • Threading Threading (179)
  • Turning Turning (997)
  • X-Offset Drilling X-Offset Drilling (7)
Cutting Diameter
Cutting Diameter
  • 0.625 in (1)
  • 0.687 in (1)
  • 0.75 in (1)
  • 0.814 in (1)
  • 0.875 in (1)
  • 0.937 in (1)
  • 1.0 in (1)
  • 1.063 in (1)
  • 1.125 in (1)
  • 1.143 in (1)
  • 1.22 in (1)
  • 1.25 in (1)
  • 1.375 in (1)
  • 1.5 in (1)
  • 1.625 in (1)
  • 1.75 in (1)
  • 1.875 in (1)
  • 2.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (1)
  • 17.45 mm (1)
  • 19.05 mm (1)
  • 20.651 mm (1)
  • 22.225 mm (1)
  • 23.8 mm (1)
  • 25.401 mm (1)
  • 27.0 mm (1)
  • 28.576 mm (1)
  • 29.0 mm (1)
  • 31.0 mm (1)
  • 31.75 mm (1)
  • 34.926 mm (1)
  • 38.1 mm (1)
  • 41.276 mm (1)
  • 44.45 mm (1)
  • 47.625 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Type of Thread
Type of Thread
  • 55 (71)
  • 60 (196)
  • ACME (148)
  • API (99)
  • API BUTTRESS (16)
  • API RD (106)
  • BSPT (55)
  • BSW (125)
  • BUTTRESS (125)
  • M (147)
  • NPT (109)
  • NPTF (55)
  • RD DIN 405 (66)
  • STUB ACME (120)
  • TR DIN 103 (66)
  • UN (180)
  • UNJ (109)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1222)
  • Interrupted (686)
  • Lightly Interrupted Cut (1222)
  • Smooth Cut (1224)
  • Varying Depth of Cut (1224)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 47.625 mm (1)
  • 52.401 mm (1)
  • 57.151 mm (1)
  • 61.901 mm (1)
  • 66.675 mm (1)
  • 71.45 mm (1)
  • 76.2 mm (1)
  • 81.0 mm (1)
  • 85.726 mm (1)
  • 87.0 mm (1)
  • 93.0 mm (1)
  • 95.25 mm (1)
  • 104.775 mm (1)
  • 114.301 mm (1)
  • 123.825 mm (1)
  • 133.35 mm (1)
  • 142.875 mm (1)
  • 152.4 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.875 in (1)
  • 2.063 in (1)
  • 2.25 in (1)
  • 2.437 in (1)
  • 2.625 in (1)
  • 2.813 in (1)
  • 3.0 in (1)
  • 3.189 in (1)
  • 3.375 in (1)
  • 3.426 in (1)
  • 3.661 in (1)
  • 3.75 in (1)
  • 4.125 in (1)
  • 4.5 in (1)
  • 4.875 in (1)
  • 5.25 in (1)
  • 5.625 in (1)
  • 6.0 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 2.52 in (1)
  • 2.835 in (1)
  • 2.992 in (1)
  • 3.189 in (1)
  • 3.386 in (1)
  • 3.543 in (1)
  • 3.74 in (1)
  • 3.781 in (1)
  • 4.055 in (1)
  • 4.213 in (1)
  • 4.331 in (1)
  • 4.606 in (1)
  • 5.079 in (1)
  • 5.472 in (1)
  • 6.22 in (1)
  • 6.575 in (1)
  • 7.165 in (1)
  • 7.521 in (1)
Reach Min to Reach Max
Reach
Reach
  • 64.0 mm (1)
  • 72.0 mm (1)
  • 76.0 mm (1)
  • 81.0 mm (1)
  • 86.0 mm (1)
  • 90.0 mm (1)
  • 95.0 mm (1)
  • 96.0 mm (1)
  • 103.0 mm (1)
  • 107.0 mm (1)
  • 110.0 mm (1)
  • 117.0 mm (1)
  • 129.0 mm (1)
  • 139.0 mm (1)
  • 158.0 mm (1)
  • 167.0 mm (1)
  • 182.0 mm (1)
  • 191.0 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (65)
  • 48.0 (14)
  • 49.783 (3)
  • 50.0 (3)
  • 61.0 (2)
  • 62.5 (20)
  • 63.0 (8)
  • 72.5 (3)
  • 75.0 (143)
  • 85.0 (4)
  • 90.0 (359)
  • 93.0 (354)
  • 95.0 (341)
  • 107.5 (82)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Cutoff Support Blade A1-A3 (3)
  • KM (973)
Number of Flutes
Number of Flutes
  • 2 (18)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (863)
  • 2.0 (912)
  • 3.0 (249)
  • 4.0 (765)
  • 6.0 (130)
  • 8.0 (433)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (69)
  • 0.002 in (221)
  • 0.003 in (175)
  • 0.004 in (812)
  • 0.005 in (71)
  • 0.006 in (121)
  • 0.007 in (121)
  • 0.008 in (875)
  • 0.01 in (118)
  • 0.011 in (79)
  • 0.012 in (77)
  • 0.014 in (205)
  • 0.015 in (19)
  • 0.016 in (1033)
  • 0.017 in (70)
  • 0.019 in (80)
  • 0.02 in (106)
  • 0.021 in (7)
  • 0.023 in (83)
  • 0.024 in (58)
  • 0.027 in (3)
  • 0.028 in (14)
  • 0.03 in (58)
  • 0.031 in (1168)
  • 0.033 in (5)
  • 0.034 in (4)
  • 0.035 in (80)
  • 0.037 in (19)
  • 0.038 in (3)
  • 0.039 in (115)
  • 0.041 in (8)
  • 0.047 in (1082)
  • 0.049 in (99)
  • 0.055 in (5)
  • 0.06 in (112)
  • 0.062 in (197)
  • 0.063 in (904)
  • 0.069 in (99)
  • 0.078 in (54)
  • 0.079 in (84)
  • 0.08 in (4)
  • 0.089 in (80)
  • 0.094 in (178)
  • 0.095 in (352)
  • 0.098 in (28)
  • 0.099 in (2)
  • 0.125 in (55)
  • 0.126 in (116)
  • 0.157 in (29)
  • 0.188 in (2)
  • 0.197 in (19)
  • 0.237 in (19)
  • 0.25 in (11)
  • 0.315 in (1)
  • 0.394 in (3)
  • 0.492 in (5)
  • 0.63 in (4)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (69)
  • 0.05 mm (221)
  • 0.076 mm (175)
  • 0.1 mm (812)
  • 0.125 mm (71)
  • 0.151 mm (121)
  • 0.176 mm (121)
  • 0.2 mm (875)
  • 0.225 mm (70)
  • 0.25 mm (115)
  • 0.275 mm (79)
  • 0.301 mm (77)
  • 0.325 mm (96)
  • 0.351 mm (189)
  • 0.375 mm (19)
  • 0.4 mm (1033)
  • 0.426 mm (70)
  • 0.45 mm (80)
  • 0.476 mm (26)
  • 0.5 mm (106)
  • 0.525 mm (7)
  • 0.576 mm (83)
  • 0.601 mm (58)
  • 0.65 mm (3)
  • 0.701 mm (14)
  • 0.75 mm (58)
  • 0.775 mm (99)
  • 0.8 mm (1069)
  • 0.826 mm (5)
  • 0.851 mm (4)
  • 0.9 mm (80)
  • 0.925 mm (19)
  • 0.976 mm (3)
  • 1.0 mm (115)
  • 1.05 mm (8)
  • 1.201 mm (1082)
  • 1.25 mm (99)
  • 1.401 mm (5)
  • 1.5 mm (108)
  • 1.526 mm (13)
  • 1.576 mm (197)
  • 1.6 mm (904)
  • 1.75 mm (99)
  • 1.975 mm (54)
  • 2.0 mm (84)
  • 2.025 mm (4)
  • 2.25 mm (80)
  • 2.375 mm (178)
  • 2.401 mm (352)
  • 2.5 mm (28)
  • 2.526 mm (2)
  • 3.176 mm (55)
  • 3.2 mm (116)
  • 4.0 mm (29)
  • 4.775 mm (2)
  • 5.0 mm (19)
  • 6.0 mm (19)
  • 6.351 mm (11)
  • 8.0 mm (1)
  • 10.0 mm (3)
  • 12.5 mm (5)
  • 16.0 mm (4)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Interrupted (18)
  • Stable (18)
  • Unstable (18)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K10M (808)
  • K10P (742)
  • K10U (716)
  • K15U (707)
  • K20K (816)
  • K25M (736)
  • K25P (727)
  • K313 (1173)
  • K420 (736)
  • K68 (1082)
  • KB9610 (721)
  • KBH20 (717)
  • KC5010 (1277)
  • KC5025 (1259)
  • KC5410 (1055)
  • KC5510 (762)
  • KC720 (1002)
  • KC730 (1101)
  • KC7310 (821)
  • KC732 (828)
  • KC8050 (1069)
  • KC810 (1165)
  • KC850 (1197)
  • KC9010 (907)
  • KC9025 (1050)
  • KC910 (1061)
  • KC9105 (956)
  • KC9110 (1220)
  • KC9120 (1027)
  • KC9125 (1095)
  • KC9140 (803)
  • KC9145 (711)
  • KC9215 (773)
  • KC9225 (1024)
  • KC9240 (1021)
  • KC9240NEW (1011)
  • KC9245 (772)
  • KC9315 (1037)
  • KC9320 (1097)
  • KC9325 (927)
  • KC935 (1168)
  • KC950 (1057)
  • KC990 (973)
  • KCK05 (1020)
  • KCK05B (860)
  • KCK15 (950)
  • KCK15B (993)
  • KCK20 (1112)
  • KCK20B (1127)
  • KCM15 (976)
  • KCM15B (910)
  • KCM25 (1044)
  • KCM25B (968)
  • KCM35 (875)
  • KCP05 (936)
  • KCP10 (1089)
  • KCP10B (1172)
  • KCP25 (1103)
  • KCP25B (1186)
  • KCP30 (1015)
  • KCP30B (733)
  • KCP40B (734)
  • KCPK05 (749)
  • KCS10B (932)
  • KCU10 (1213)
  • KCU25 (1192)
  • KT175 (817)
  • KT315 (1067)
  • KU10T (981)
  • KU30T (1108)
  • KY1320 (712)
  • KY3000 (751)
  • KY3500 (757)
  • KYHK15B (696)
  • KYK35 (740)
  • NL250 (755)
  • NL920 (694)
  • TN10P (844)
  • TN15M (733)
  • TN20K (761)
  • TN20P (810)
  • TN30M (772)
  • TN5015 (712)
  • TN5120 (708)
  • TN7010 (743)
  • TN7015 (769)
  • TN7025 (762)
  • TN7110 (813)
  • TN7115 (734)
  • TN8025 (711)
  • WK05CT (770)
  • WK20CT (865)
  • WM15CT (848)
  • WM25CT (857)
  • WP15CT (886)
  • WP25CT (912)
  • WP35CT (796)
  • WS10PT (734)
  • WS25PT (744)
  • WU10HT (770)
Hand Of Tool
Hand Of Tool
  • L (438)
  • N (52)
  • N - Neutral (3)
  • R (483)
Wiper Insert
Wiper Insert
  • N (1357)
  • Y (754)
Drill Type
Drill Type
  • 86-01 (18)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (51)
  • 11.101 mm (3)
  • 11.15 mm (3)
  • 13.0 mm (15)
  • 14.25 mm (3)
  • 16.0 mm (19)
  • 18.5 mm (5)
  • 20.0 mm (26)
  • 25.0 mm (37)
  • 32.0 mm (87)
  • 34.0 mm (6)
  • 40.0 mm (89)
  • 41.301 mm (20)
  • 44.0 mm (18)
  • 47.6 mm (20)
  • 50.0 mm (89)
  • 54.0 mm (51)
  • 56.625 mm (20)
  • 57.2 mm (11)
  • 60.0 mm (2)
  • 63.0 mm (32)
  • 64.0 mm (2)
  • 70.0 mm (54)
  • 74.0 mm (4)
  • 80.0 mm (59)
  • 86.0 mm (91)
  • 88.9 mm (40)
  • 90.0 mm (6)
  • 94.0 mm (2)
  • 100.0 mm (46)
  • 104.0 mm (2)
  • 106.0 mm (70)
  • 118.0 mm (2)
  • 120.0 mm (3)
  • 130.0 mm (2)
  • 139.701 mm (20)
  • 150.0 mm (1)
  • 174.601 mm (20)
  • 209.601 mm (11)
  • 222.3 mm (11)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (51)
  • 0.437 in (3)
  • 0.439 in (3)
  • 0.512 in (15)
  • 0.561 in (3)
  • 0.63 in (19)
  • 0.728 in (5)
  • 0.787 in (26)
  • 0.984 in (37)
  • 1.26 in (87)
  • 1.339 in (6)
  • 1.575 in (89)
  • 1.627 in (20)
  • 1.732 in (18)
  • 1.874 in (20)
  • 1.969 in (89)
  • 2.126 in (51)
  • 2.229 in (20)
  • 2.253 in (11)
  • 2.362 in (2)
  • 2.48 in (32)
  • 2.52 in (2)
  • 2.757 in (54)
  • 2.914 in (4)
  • 3.15 in (59)
  • 3.386 in (91)
  • 3.5 in (40)
  • 3.543 in (6)
  • 3.701 in (2)
  • 3.938 in (46)
  • 4.094 in (2)
  • 4.173 in (70)
  • 4.646 in (2)
  • 4.724 in (3)
  • 5.118 in (2)
  • 5.5 in (20)
  • 5.906 in (1)
  • 6.875 in (20)
  • 8.252 in (11)
  • 8.752 in (11)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 1.024 in (2)
  • 1.063 in (2)
  • 1.26 in (10)
  • 393.661 in (129)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 26.0 mm (2)
  • 27.0 mm (2)
  • 32.0 mm (10)
  • 9999.0 mm (129)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (212)
  • E (236)
  • P (2)
  • S (498)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (522)
  • DOUBLE POSITIVE (4)
  • NEGATIVE-ZERO (74)
  • NEUTRAL (ZERO) (305)
  • POSITIVE-NEGATIVE (1)
  • POSITIVE-ZERO (40)
Maximum Bore Depth
Maximum Bore Depth
  • 1.379 in (30)
  • 1.385 in (5)
  • 1.387 in (2)
  • 1.43 in (1)
  • 1.508 in (3)
  • 1.575 in (84)
  • 1.614 in (6)
  • 1.655 in (7)
  • 1.661 in (7)
  • 1.665 in (2)
  • 1.701 in (2)
  • 1.772 in (19)
  • 1.938 in (2)
  • 1.969 in (114)
  • 1.986 in (2)
  • 2.039 in (3)
  • 2.165 in (1)
  • 2.169 in (15)
  • 2.205 in (2)
  • 2.209 in (11)
  • 2.211 in (2)
  • 2.283 in (4)
  • 2.362 in (146)
  • 2.382 in (4)
  • 2.444 in (3)
  • 2.757 in (91)
  • 2.761 in (2)
  • 2.769 in (4)
  • 2.77 in (1)
  • 2.775 in (6)
  • 2.953 in (3)
  • 2.955 in (17)
  • 2.993 in (8)
  • 3.037 in (4)
  • 3.044 in (8)
  • 3.132 in (1)
  • 3.15 in (13)
  • 3.152 in (2)
  • 3.2 in (4)
  • 3.434 in (8)
  • 3.446 in (4)
  • 3.469 in (2)
  • 3.473 in (8)
  • 3.476 in (4)
  • 3.485 in (2)
  • 3.593 in (4)
  • 3.594 in (2)
  • 3.781 in (12)
  • 3.789 in (8)
  • 3.907 in (1)
  • 3.938 in (8)
  • 4.11 in (4)
  • 4.412 in (12)
  • 4.418 in (2)
  • 4.464 in (1)
  • 4.529 in (17)
  • 4.612 in (10)
  • 4.621 in (1)
  • 4.724 in (2)
  • 4.726 in (4)
  • 4.738 in (13)
  • 5.513 in (4)
  • 5.883 in (8)
Maximum Bore Depth Min